I love the texture of "Forged" carbon fiber. It gives me an idea to do kitchen counter-tops using this method. It has a "Black Granite" quality about it. Looks cool!
@Freedom_is_better_than_safety4 жыл бұрын
Pro tip for ya: When working with MDF, use a sanding sealer on all the surfaces. It’s cheap, and it doesn’t change its shape or properties, but it does “seal” it when pouring resins or epoxies or even painting it. It’s very easy to use, dries fast, and once keyed, provides the same adhesion as the raw MDF in my opinion. Love the channel!
@ECOLAPStudio4 жыл бұрын
Hello, Buddy! Thank you very much for your advice. I'll try it the next time I work with MDF. I'm will make a fun and informative video. Stay tuned to my channel. Thank you.
@albertozampierin30364 жыл бұрын
@@ECOLAPStudio hi where i can buy the bags for make vacuum the pieces?. The same that you use. Thanks
@ErtsenPlayGames4 жыл бұрын
@@albertozampierin3036 look online for travel vacuum bag (you put clothes inside)
@ErtsenPlayGames4 жыл бұрын
@@ECOLAPStudio this "sealer" is just PVA ....in my opinion its waste of time if you aply thick resin / gelcoat and in the same time it is used as release agent for resin etc so.......
@penguinstalker12384 жыл бұрын
@@ECOLAPStudio hey bro u should make carbon fiber mirror housing
@KevConc4 жыл бұрын
This is the type of creation I needed in My Life!!!🙌🏽🙌🏽🙌🏽
@thinhdiezel4 жыл бұрын
Guys ! The best channel about carbon fiber on KZbin is here!
@ang92224 жыл бұрын
I like the way you kick away the old table!
@vocks853 жыл бұрын
You should start using foam cores on some of your projects. In this case a foam wrapped table would weigh WAY less. Love your channel!
@Lolatyou3323 жыл бұрын
This is what I've been planning on doing. Only problem is that it limits where you can screw it and you will also need to apply carbon fiber to the bottom of the table. You will have to create a mechanical lock or use glue to allow screws to be used.
@vocks853 жыл бұрын
@@Lolatyou332 could you drill holes in the bottom, fill with epoxy or carbon epoxy mix, and tap it? Or you could just drill holes and install rivnuts?
@Lolatyou3323 жыл бұрын
@@vocks85 best case, you would install a metal nut that would be mechanically locked when the carbon fiber is hardened. Most feasible case is just to use rivet nuts as it would make a mechanical lock. The rivet nut becomes a potential failure point, but in reality, furniture really doesn't need that level of strength.
@vocks853 жыл бұрын
@@Lolatyou332 good points! Can’t wait for the next video!
@WereAllThatBored4 жыл бұрын
For anyone trying this, you can buy chopped carbon to save yourself a little bit of time. Very cool video.
@agungwidjaya37784 жыл бұрын
Should i use the 12k carbon or 3k carbon?
@RodrigoNascimentoMattos4 жыл бұрын
@@agungwidjaya3778 12k is better
@warrenleak57064 жыл бұрын
Wxaxrngg.
@warrenleak57064 жыл бұрын
Engins engl ish english 3
@WereAllThatBored4 жыл бұрын
@@agungwidjaya3778 Sorry for the late response. 5 months later and KZbin sends this alert. With forged carbon use whatever the cloth you want. If you want wide go wide. If you want narrow weave go narrow. With forged carbon its not the same as continuous weave. Its cosmetic not structural. Pick the cloth that has the look that you are trying to achieve. It will be light and look great, but dont count on it being any stronger than the epoxy bound with
@Billyboy2a6 Жыл бұрын
This was exactly wat i needed to see for my new project! Tanks!
@bspark10044 жыл бұрын
묘한 중독성이 있어어 계속 보게 돼네요~~^^ 저도 한번 도전해 보고 싶은 욕심이 나네요.
@damiancampos79914 жыл бұрын
Muy profesional el trabajo todo limpio, ordenado y de mucha delicadeza
@waqarghulam3548 Жыл бұрын
Please make a forged CF remote holder. Also you could have used thick glass sheet with some weights on top to make the surface perfectly smooth.
@roguber4 жыл бұрын
you really do an exceptional job. You have taught me and I am going to start lining parts of my car. Congratulations on your work and dedication.
@blackoutz47652 жыл бұрын
Ikr . Ima do everything i can as forged carbon
@T5RKID4 жыл бұрын
Please make video making Forged Carbon dash trim! Love all the videos!
@kevinm37514 жыл бұрын
That came out sweet, I swear when you was putting down the fibers it looked just like the bottom of a very nasty chicken coup...;) What a fantastic use of leftover carbon fiber!
@natanaelsantos20274 жыл бұрын
Exactly the video i've been lookin for. Tank you very much. Nice work !
@gazza85962 жыл бұрын
That would look even more awesome with gold flakes in it but wow looks amazing
@dmphotoshoperman92684 жыл бұрын
NICE AND FUNNY JOB, PLS MORE CARBONS FOR M4, I LOVE THIS CAR
@pewtopiousjohnstone35464 жыл бұрын
amen
@b8gged4 жыл бұрын
do more interior pieces please! like side panels etc
@adamkarina11794 жыл бұрын
Just discovered the channel and love the content! You should consider selling miscellaneous items as i know many people as well as myself would be interested! Keep up the great work!
@lukaszsikora8492 жыл бұрын
How much that cost you?
@dmitryclarke21274 жыл бұрын
Can you make a video making something in colored carbon? How does that work? How do you add color? Thanks. Love your work.
@shady_774 жыл бұрын
colored carbon fiber has to be specially order because the color is mixed in the weave
@jadekingofficial4 жыл бұрын
You can either buy coloured weave or tint the final clear coat
@hachigarage63314 жыл бұрын
That is absolutely gorgeous! Great video as always. I am going to make these someday. I would like to make kitchen counter tops like this.
@adrias47124 жыл бұрын
like for the end
@ewenlife4 жыл бұрын
It will be great to add the material used in the description
@igo-r4 жыл бұрын
Eres un fenómeno! Yo estoy empezando con la fibra de vidrio ✌️
@Roy.Bukan.Arsitek4 жыл бұрын
Iam from indonesia,, i like this art
@20766494 жыл бұрын
And that is a masterpiece! (Not joking)
@スナオ-y5p4 жыл бұрын
なるほど。余った物を再生する為に使用した訳ね?いいアイデアです👍
@donxmidori4 жыл бұрын
元々カーボンコンポジット、チョップドカーボン、などの名前でこーゆー柄ありますよね
@버즈라이트이어-j8z4 жыл бұрын
알사장님 추천으로 왔습니다. 영상 퀄러티 좋아요~ 재미있게 보고갑니다
@MercilessMrBrooks4 жыл бұрын
your channel is gonna blow soon! great content all around!!!!
@nonamebleach8 ай бұрын
That would be sickkkkk as a front splitter.
@joebloggs41914 жыл бұрын
I just watched this video for a second time and still that forged carbon fiber looks real good! One question regarding the finishing, on this video I see you sanded and then used a cutting compound to get the high gloss shine but I have seen in other videos after sanding people apply 2k clear lacquer. Question is which more durable and better for car interior pieces, sanding and then cutting and buffing the epoxy resin or sanding the then applying the 2k lacquer?
@robertd57i9892 жыл бұрын
Yeeaah, im putting on in the game room
@nikitakristal22454 жыл бұрын
Спасибо, я ломал голову где взять ровинг, а оказалось все так просто :)
@Алекс-г2щ4 жыл бұрын
Просто нарезать, я сам был в шоке😁 А так можно было?!🤔😁
@emmanuel49244 жыл бұрын
I hope you can help me, is it necessary to use peel ply? Or could it be made without it, even if the finish was different? And if the epoxy gel coat is the same that people use when working fiberglass
@803brando2 жыл бұрын
should do the initial layup in reverse on a piece of glass, would save time sanding, and the top would turn out laser flat.
@LVCMTB4 жыл бұрын
Very nice!
@rockababy17904 жыл бұрын
favorite inspire
@TheCanky4 жыл бұрын
you need a universal remote like a logitech harmony :P but really nice table!
@HiZthu4 жыл бұрын
오 이 테이블이 훨씬 멋지네요!
@ЮрийАгапов-щ4я3 жыл бұрын
Слава Рукастым - Glory to handymen!
@Super0Phantom4 жыл бұрын
Perfect job, man! Like your videos very much! Can you give us (your subscribers) advice, how to do cylindrical things such as vase, skittle or may be intake manifold pipe by using mold and without damaging original item. I know that we need to use at least 2 part fiberglass mold, but don’t know how to put pieces together.
@ECOLAPStudio4 жыл бұрын
Hello, Buddy! Can you make the cylinder into styrofoam? If you can, skin carbon fiber made of styrofoam (requires multiple layers). And styrofoam can be removed with acetone. I hope helpful.
@Super0Phantom4 жыл бұрын
It’s a good idea to use styrofoam. But what if we need to make complicated item which I can’t make out of styrofoam or may be if we need reusable mold?
@jakubrysz32874 жыл бұрын
YOU ARE AMAZING
@taelordixon36213 жыл бұрын
Can someone please explain to me how the hell he got that gloss finish after just using a cutting compound, I mean he had to have used multiple other compounds off camera to get to that
@95404004 жыл бұрын
Awww man, wish u would do close up shots of the finish on that table top 🙁
@Hwan664 жыл бұрын
형 레전드네... 개멋있어 (형 유튜브 더 대박나면 좋겠어요~~)
@francoisandrianne6504 жыл бұрын
Ça serait le feu si tu faisais une vidéo échappement en fibre de carbone
@riyadhish4 жыл бұрын
Damn, your handcrafting skills are top notch
@autogeek233 жыл бұрын
Carbon fiber hood video soon??? Loved this video btw.
@Hellsatanx4 жыл бұрын
can you please make carbon fiber potato? the world needs to see it
@fuzeygo93234 жыл бұрын
Encore une superbe vidéo 😉 continue comme ça 👍
@davidvillanueva32584 жыл бұрын
Una pasada de trabajo!!
@miguja81724 жыл бұрын
that design must be nice on the speaker :-D
@drz77874 жыл бұрын
와 이런거 배우는 공방이 따로 있나요??!!! 구독 좋아요 알람설정까지 하고 갑니다~♡
@nicozucker2794 жыл бұрын
Sehr schönes Video und alles sehr gut verständlich. Schöne Einblendung der benutzten Materialien und sehr gut erkennbar wie alles umgesetzt wurde😄 Finde das Ende ziemlich hart, wenn der ate Tisch zum Verkauf steht, wäre ich gerne interessiert diesen zu erwerben.
Can you Do More car stuff like mirrors splitters and that kind stuff
@florentmagneau21704 жыл бұрын
Bien plus belle! Top
@nas00754 жыл бұрын
LOL funny and educational.
@osaidkhan2844 жыл бұрын
Love from Pakistan 🇵🇰 ❤️❤️❤️❤️
@aLessandr0s4 жыл бұрын
Love your videos! Great job keep it up :D Can you make a list what you need to make the parts?
@ECOLAPStudio4 жыл бұрын
Hello, Buddy! I purchased materials from a Korean online shop. However, Korean online shops do not ship overseas. Epoxy gelcoat Lamating epoxy resin Top coat epoxy resin Carbon fiber cloth I'm going to show you an online shop in the UK. Maybe you can find what you want. I hope you helpful. www.easycomposites.co.uk/
@detailaddicts2 жыл бұрын
great work. try using half the amount of compound. you'll get a better cut and have less chance of pig tailing the epoxy. seriously awesome videos my man. maybe use foam instead for extra weight reduction?
@peterwood26334 жыл бұрын
Very nice. Get a harmony elite remote though:D
@Petito..4 жыл бұрын
Menzerna FTW!!!!
@aurelioaudras97584 жыл бұрын
super vidéo , bravo !
@조용철-t7r4 жыл бұрын
동영상 재미있게 잘 보고있습니다. 혹시 동영상을 보고 해보고싶은게 있는데요. 본을떠서 개인이 따라 할수있을까요?
@joebloggs41914 жыл бұрын
At first I thought that looks a mess but when the article was finished....wow! it looks good! One question can you use rubbing alcohol or isopropyl alcohol instead of acetone to the clean the item?
@ECOLAPStudio4 жыл бұрын
Hello, Buddy!! Yes, You can use alcohol or isopropyl alcohol. I hope you helpful.
@jakubrysz32874 жыл бұрын
Im waiting for next carbon parts for BMW M4 and other things
@thomas.2344 жыл бұрын
Oh yeaaah une nouvelle vidéo 💪🏻💪🏻💪🏻
@bondage44184 жыл бұрын
The black glue that you applie to the wood is normal wood glue ?
@corbeta264 жыл бұрын
No tires la otra 😱 regalamela.
@Lolatyou3323 жыл бұрын
I understand this isn't necessarily meant to be a structural item, but cutting the carbon fiber like that likely removes a lot of the strength characteristics that it contains.
@SilentWarrior1324 жыл бұрын
Did nobody ask how many remotes this guy has? Awesome work btw.
@MacBookAir-cu4fb4 жыл бұрын
Can you try to do more things entirely out of carbon? I love things wraped in Carbon but that doesn’t give you the benefit of the extreme low weight carbon fibre has! 😅👌🏼
@ECOLAPStudio4 жыл бұрын
Hello, Buddy! I wanted to make a cheap carbon fiber table, so I skinned it. If the entire table is made of carbon, it will be very expensive. I am going to make various things using carbon fiber. I'm will make a fun and informative video. Stay tuned to my channel. Thank you for watching.
@MacBookAir-cu4fb4 жыл бұрын
@@ECOLAPStudio Yeah I know that and I didnt mean that you would have to do the whole table out of carbon haha Thats totally okay the way you did that because nobody would make it different! But i meant that I would love to see more videos where you build things entirely out of carbon! ;D
@trussardi08062 жыл бұрын
This is a great video. If I want a skinned bumper, how much carbon fiber do I need to prepare, and how much do I need to deploy the epoxy. If you can give me suggestions, I will be very grateful, thank you!
@rstezza4 жыл бұрын
Brilliant 👌
@nubmikeyz65214 жыл бұрын
Jeeeez this looks amazing! Amazing video once again! (Also funny too!!) Keep up the amazing work!! Be safe during this COVID-19 as well :)
@ECOLAPStudio4 жыл бұрын
Hello, Buddy! Thank you so much. I hope you and your family are healthy.
@samirr__012 жыл бұрын
Share all the products you use so we can make our products as u make.☺️
@koyayu32984 жыл бұрын
毎回思いますけど、凄いですね!
@NicolasLee.4 жыл бұрын
나중에 아이패드 케이스 만들기 같은것도 올려주시면 좋을것 같아요 뭔가 좀더 일상생활에 근접한?....
@roni26714 жыл бұрын
You shud build coffee table using metaltube(for frame) and forged carbonfiber😍
@MisforMax4 жыл бұрын
that would be a lot of carbon
@maxbyrde66284 жыл бұрын
Amazing. I’m looking to this on some of my interior trim in my car, but I want the forged dry effect. I mean without the gloss. Should I just stop before the polishing part or there is a different procedure?
@ECOLAPStudio4 жыл бұрын
Hello, Buddy! If you want matte carbon fiber, you can use matte clear spray after sanding. However, care must be taken to avoid pinholes when using it. because matte cannot be polished.
@maxbyrde66284 жыл бұрын
Ok thanks. Pinholes? You mean air bubbles?
@jayelectic80172 жыл бұрын
do you have to use blow torch or can you use a heat gun?
@ArshdeepSingh-pv7lf4 жыл бұрын
Do a video on making a carbon fiber ps4 and ps4 controller.
@mt49134 жыл бұрын
Superbe vidéo j'aimerais bien commencer à faire quelques pièces simple carbone mais où se procurer et quoi
@ECOLAPStudio4 жыл бұрын
Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. www.easycomposites.co.uk/
@jakubnovak79754 жыл бұрын
Video perfect! wondering what gelcoat was used. the black one right at the beginning, is it a gelcoat that is used to make molds?
@ECOLAPStudio4 жыл бұрын
Hello, Buddy! I used an epoxy gel coat. Epoxy gel coats are often used to make molds.
@jakubnovak79754 жыл бұрын
@@ECOLAPStudio Thanks for the reply ! Very nice work, I hope I will have the same success: D
@BluendNeil4 жыл бұрын
오 발로 찬거 우리집으로 가져 오고 싶다...
@kovacs99744 жыл бұрын
Amazing video. Do you think the gas torch to remove air bubble can be replaced with a heatgun? Thx!
@isanmoldonado45874 жыл бұрын
Kovacs yes
@kovacs99744 жыл бұрын
@@isanmoldonado4587 thx !
@dva1114 жыл бұрын
Приветствую! Очень шикарно, впечатлительно, и не обычно! Подскажите пожалуйста, что за материя которую Вы потом отрываете? Заранее спасибо!
@허스키김토푸4 жыл бұрын
중간중간 깨알 개그코드ㅋㅋㅋㅋ.... 영상 잘보고있습니다. 저도 언젠가는 카본파츠를 직접만들어보고 싶네요😃
@ВадимКириченко-с7к4 жыл бұрын
Very nice 👍 🔥🔥🔥
@terrytumultyjr4 жыл бұрын
I did this to my truck a few months ago using vacuum bagging
@E36_boat2 жыл бұрын
I have a faded carbon fiber hood on my car can this be done over carbon fiber ?
@ACanadianMonk4 жыл бұрын
Imma make myself one of these🔥
@이대호-h5t4 жыл бұрын
잼있으셔요~^^ 잘보고 있어요
@ultralinx2004 жыл бұрын
That scale my friend, are made by human. Its gonna brake soon if you keep dropping it like that everytime you're using it, on every video you made 🤣
@brendand87294 жыл бұрын
Next video: makes new scale out of CF
@benb10224 жыл бұрын
It reminded me of those people that slams their phones down