Carbon Fiber Tank Texan SS 457

Super fantastic Carbon Fiber Tank On the Texan SS 457!!
DOT approved 3625 PSI fill, and Monster power coming out of this beast. You have seen the stock numbers, now check these out!
I'm loosing my mind over the fact it is coming from Air Force so it is warranty approved.

[@heatherh2784]

good to see you again! thx for info

[@brandonmatz9832]

Mr HP great edumication on that bottle upgrade that will blow ears the off off bugs bunny...and any other critter.

[@terryweaver2791]

Air Force owes you a check my friend

[@wjstewdog]

Thanks for the tank part!! Can you recommend scope and scope rings?

[@Florida_Bullfrog]

I’m watching the video now, and you may answer in the video, but how much louder is the SS on this setup?

[@maryokelly9674]

Hey Please could you tell me If after you install the new kit Your trigger gets more heavy? Or it feels same like stock? Thanks

[@martinveale5014]

Hi I didn’t see a link for the shoulder pad rubber. Can you post it. Please

[@zhingonizuka5537]

So this c.f. tank comes with tx2 valve? Duper nice sir! Is there any web link for this c.f. tank? Does it come with a built-in regulator?

[@andywatts7130]

what is the benefit to a larger p.s.i. tank?more shot per tank? or higher velocity.Why did you not go with the 4500 psi conversion kit with the 4500 carbon tank?

[@freedomchannel3656]

Do you need to add silicone lube to the O ring before install?

[@Jppreacher]

I just added the abl to my 4 Atn scopes. I just want to put it on the texan ss .457 cf I just purchased. I purchased the Neilson 245 grain lead. how do I put the proper ballistics in the laser range finder so that it will work properly/?

[@billreynolds2766]

Hi. My tx2 valve came apart .. The top shaped seal at the tank side came off the shaft inside the tank. I put it back on the shaft and it aired up ok. Shot the first shot and it was leaking again. Took about 4 mins to empty out the tank. Have heard of this problem? Thanks

[@longislandairgunner1600]

Forget Tom Hanks, you are the Guns And Ammo MR. Rogers!!!!!!

[@brucerogers3253]

Is it okay if the bullet tray on my 45 caliber air Force Texan touches the top hat on the air tank? I'm asking because I cannot completely screw in my air tank to where it's supposed to seat now when I get some air pressure in there tank won't move or wobble any questions or comments would be appreciated...

[@yoseptaranda3481]

I love yuo texan ss 457 ❤❤👍👍👍

[@BigBoreAirgun]

Do you have any advice on changing out the original tx1 valve tank on my texan .457 rifle to a CF tank with the tx2 valve? Is there a hammer spring to replace?

[@BigBoreAirgun]

My guns serial number is in the first 100 made so its an original.

[@Mrhollowpoint1]

Tx2 doesn't use the return spring, unscrew the old and put in the new.

[@zakmohti]

Mrhollowpoint1, for the 457 SS CF tank, your table shows ~890fps for 330-350gr. Airforce website showing 810fps for 350gr, am getting between 790 and 800FPS for 350gr. Please can you confirm that the numbers you show for SS 3625psi tank is repeatable? If yes, is that at normal pressure or are you going over 3625psi to get almost 100fps more than Airforce and me? I'd love to get your numbers. Thanks

[@Macdonald-we4gx]

Ya idk if his chrony is reading high or what

[@denniszannoni2731]

I am considering purchasing that air rifle. I heard that the tank is hard to remove and put back on. What has been your experience. Also can I remove the silencing piece for easier storage in a backpack for hailing it around. Thanks.

[@thequigley72]

I leave everything together, the tank is not that hard to remove, it comes separately in the box so you will have to put it on. If I can do it, anyone can, I'll a klutz.

[@ramirezvicentefilemon8655]

Do you just change the bottle

[@marcegrecco53]

You’re a funny guy

[@mc-lockdown1959]

Can you change out profiled tanks in the field ?

[@Mrhollowpoint1]

I'm not sure I understand? The tank has a fill nipple on the side, why change the tank?

[@lorka42]

I can't seem to find those extended pic rails anywhere, are they still available?

[@Mrhollowpoint1]

I have them, contact me [e-mail]

[@lorka42]

@@Mrhollowpoint1 I was worried about eye relief, but three's enough with the top bit. Thanks man!

[@justinnewberry1072]

Is that with the original valve or the TX2 valve?

[@Mrhollowpoint1]

It's the TX2 valve.

[@fvids1603]

Hey I’m having trouble filling my cf bottle it won’t take the air just blows out the calve. How can I fix this problem new tank shipped empty

[@Mrhollowpoint1]

Email me please, I have questions.

[@maryokelly9674]

Hey If I'm not wrong You need to put it at half way like if you load it then you need to pull up the tip of the valve then pumped air and then you will get air in your tank The tip of valve has to be out before you put air if the tip is pushed back you will not get any air Good luck! Hope it helps

[@14jbworkingclass]

Did that help I'm having the same problem.

[@dakillasz]

I have to pay about $400 Extra for the carbon fiber tank… and didn’t come with original take..??? Love the concept of made in USA and would love to support…But How much that tank really cost..? Or maybe the old take have a Bad defects …??? Do I have discounts from my original tank…?? Don’t like when corporations try to take advantage(tricking) of people… my cheap Korean made 15 years still working great… my Texan is still in the chop…and it’s been two years now in and out… lol… and hope this comment is not offended anyone but turn it to positive improvement for the company. Aloha.

[@MANNYENGMAIL]

Do i have to change internals? when i change the bottle?

[@Mrhollowpoint1]

You shouldn't have to

[@ramirezvicentefilemon8655]

Where did you get the bottle?

[@Mrhollowpoint1]

From Air Force

[@Eric-ic4rs]

Link for the shoulder pad?

[@Mrhollowpoint1]

GlobalPioneer New Stock 6 Position Ribbed Stealth Slip on Rubber Combat Buttpad Butt Pad

[@Mrhollowpoint1]

Amazon

[@AngelRodriguez-xe6ms]

What size allen ranch do you need to put tank on and off?

[@dallasmapes8280]

Ya'll know you can get it with these as long as it's not on back order strait from Airgun Depot, guess you do now! Sry to all who now wish they hadn't read this.😉 waiting on mine delivery before my B-day, dont ask!🤣👍👍

[@technicallyballingonabudge8341]

Why is my rifle leaking down berral

[@thequigley72]

Sounds like the valve stem isn't closing all the way, let it go empty then examine it.

[@Foxfire-traditional]

LOL big honking weiner bullets.