Carburetor Upgrade to 15mm in 49cc Pocket Bike Engine - Instructions

Video how to upgrade standard carburetor to 15mm carburetor in 49cc engine (pocket bike, mini quad, mini dirt bike). Better carburetor in 49cc mini pocket bike.
SHOP HERE 👇👇👇 🚚 Fast Delivery to 32 EU Countries
minibikes.store/
Video Sponsored by: Nitro Motors
Please SUBSCRIBE to get latest videos about Mini Bikes
/ @minibikesstore
CONNECT WITH US HERE!
Facebook: / mini-bikes-store-37621...
VIDEO BLOG: minibikes.store/video-blog
Join our community “Mini Bikes International Support Group - Mini Pocket Bikes, Quads, Pit Bike”
/ 697980870366878
Please, support our channel with :
LIKE 👍
SHARE ✉
SUBSCRIBE ✔
Carburetor Upgrade to 15mm in 49cc Pocket Bike Engine - Instructions
#PS50PocketBike #MiniBikesStore #NitroMotors

[@MiniBikesStore]

SHOP HERE 👇👇👇 🚚 Delivery to 32 EU Countries minibikes.store/

[@christianrodelas6284]

Magkano ang upgraded na carburetor?

[@ematrescec7030]

Where is delivery for CROATIA??

[@kuldar.]

@@ematrescec7030 What is Croatia? Yugoslavia?

[@moped1011]

Merci beaucoup ta vidéo était génial

[@rosskennedy7039]

Do you have a video with the bike running with this new carb on thanks. This video will be a big help as im installing the upgraded enging 2 my project bike and it has this carb on

[@alexv4223]

As far as reed valves, what one are you running on this bike and for a bike where max power isn’t needed what do you recommend?

[@porkytv1079]

wow nice..

[@beatsbykobra94]

Where can you get the correct throttle cable for this? Every one i buy is for the old carburettor and its not the same sizing at the end.

[@jakubolesiak9284]

Czy gaźnik jest jeszcze do kupienia i jaka cena razem z przesyłką ? Czy też lubi tak często cieknąć jak oryginał ?

[@phippsy06]

What is the total length of performance carburetor with filter and manifold on or how much longer in total is it to standard carb setup

[@hisskir1081]

What do I do if I’ve got a over flow how do I leak it I’ve got the carb but used it for a week and someone said it had a overflow it don’t start

[@calebriordan9416]

The old carb had fuel stop tap, this one doesn’t? How does that work?

[@robertboyd321]

Will you ship to Australia? I could not find the 15mm carburetor in your Video. All I could find is a 19mm one.

[@MrNathaniel6969]

do you not sell this any longer at your store? i can not find it

[@antalbos3547]

the cable does not go through the tube it gets stuck half way what should I do?

[@Bigdaddy-ht2gn]

I have bought one of these carbs it had developed a crack where the carb mounts to the intake after a few months of riding the carb completely broke off the intake. I think It was because it was a knockoff carburetor and was built very poorly

[@samsgarage1716]

I’m having a problem with my after market carburetors snapping on me when I ride.I already went through 3 of them.I didn’t wanna put the stock one back on.do you know what else I can do

[@MiniBikesStore]

you may have to much vibrations on the engine, check the flywheel, clutch make sure they are in good shape

[@bos123tre456]

Have broke 3 carburetors with my pocket bike with Kit bigbore i dont know why but i have try to fix it with the epoxy mastic and after 24house is broken againt... runnig 2 min with this

[@rabbitfootedkitty1339]

My pocket bike that came with the "upgraded carburetor" is running way to rich and I don't think there's any way to adjust it. The only adjustment is the idle speed. I recommend using the "stock carburetor."

[@tyladube801]

The stock carb is no better if it's running rich move the c clip on the fuel needle or put a different jet in the carb that's what I'm about to start doing is messing with my jetting so I can find the correct size

[@rabbitfootedkitty1339]

@@tyladube801 Or you could make a simple custom intake manifold/reed cage that will adapt a HDA style carburetor with mixture screws, no fucking around with jets.

[@tatookiller9500]

yeah no I got one of those upgraded and they suck, can adjust the float either

[@danielmantio7905]

Go one down on main jet 😊

[@TomGTARec]

I bought a whole upgraded engine from eBay but the 15mm upgraded carb won't fit because of the rear swing arm on my son's mini quad, is there any way around this? I know it's probably a long shot but i thought I'd ask 😁.

[@evltwin984]

Did you get the upgraded carb to fit? Could you use the original manifold to reduce the overall length, so it dosent hit the swingarm? Im thinking of doing the same to my sons quad. If you succeeded did it improve the power at all? Cheers

[@thesunsetspirit9206]

Did you ever manage to get the race carb on the quad? I'm thinking of doing the same.

[@impactproformance]

Look at different intake manifolds

[@klepakkl9677]

Cześć gdzie mogę dokupić przepustnicę do tego gaznika ?

[@evltwin984]

Does it give more power at all? My sons quad needs more power down low, any mod suggestions ?

[@MiniBikesStore]

if is it 49cc 2 stroke then go for big bore kit

[@Potato37184]

Get a snake pipe

[@mkfireworks3686]

What dels it do it give your more speed or better ride?

[@MiniBikesStore]

better throttle responce, better accelleration

[@mistamastamind]

Hello?????? Everyone wants to know the correct throttle cable. The stock cable that comes with the bike is oo short. What's the part number of cable needed to run this carb??????

[@HMAKRIDAKIS]

My filter doesn’t fit on my carb?

[@MiniBikesStore]

Please SUBSCRIBE to get latest videos about Mini Bikes kzbin.info/door/jmGnctv7sAks8Dx4cNB4hQ

[@theislandbug1254]

I installed the big bore kit and I start the engine is reving to hi the idel Needle does not do any different what is your suggestion of solving this problem

[@HonderdtachtigCC]

best is to record the issue and post it so we can have a look

[@MiniBikesStore]

check the idle speed screw, also check the throttle line, make sure you have little bit loose at the twist throttle, if not then adjust throttle line at both ends bu turning screws in till you get loose at the twist throttle

[@zdog28]

How much is that performance carburetor in US dollars

[@moped1011]

Tu pourrais faire une vidéo sur le kit big bore Pocket bike

[@MiniBikesStore]

Please check our new video

[@strich7385]

Hi, What cable do I need for this carb please ?

[@strich7385]

Still haven’t found out haha!

[@mikebrockus1003]

What Size Is Stock For the pocket Bike I have a 33cc engine is the 15mm too big?

[@Potato37184]

No it isn't

[@mistrbentkarma1592]

Would this carb work on my x2 pocket bike?

[@nicovc6585]

@WhySoMusty update pls

[@jay37010]

I need a carburator for a SYXMOTO 50CC. Do you have any?

[@Potato37184]

The carburetor will fit on any pocket bike

[@arjaycayabyab8034]

How much carburetor like that boss

[@theaussie7160]

49cc dirt bikes with swing arm ....lift motor with bolt nuts 5-10mm to fit

[@timothemumenthaler1159]

What would happen if we used a 19mm carb ?

[@Baldys_projects]

I have a 372xp carb on my x2 49cc engine it's 20mm.

[@CKBsubs]

@@Baldys_projects how well does it run? pro/cons of it ?

[@Baldys_projects]

@@CKBsubs It works great more power and easy to tune but I don't have any cons about it.

[@brucegissing9489]

hi sir i am after a electric start kit for my 50cc pocket bike can you pls tell me wear i can get it thank you

[@MiniBikesStore]

hi, please send us email to [e-mail]

[@lolplayer7825]

hello can i install this on my 49cc scooter?

[@Potato37184]

Does your Scooter have a pocket bike engine and exhaust?

[@derbirallia2700]

What frame is that?

[@MiniBikesStore]

PS50 Rocket Sport minibikes.store/ps50-rocket-sport-pocket-bike-mini-moto

[@Dagwood82]

Can you on your site ship to United States?

[@MiniBikesStore]

sorry, we only ship within Europe

[@jaydanvandegeest2180]

How much faster wil it go mine is going 50 kmph

[@Potato37184]

There is no different in speed

[@nelsoncalinisan7262]

Where can I buy that kind of frame Sir?

[@theLyzhendricks]

Seems like the 4 stroke frame with a 2 stroke motor

[@bobi077]

I not find in you shop

[@MiniBikesStore]

send us an email to [e-mail]

[@freakyboy251]

Which size is the nozzle? M4, M5 or M6?

[@EsR9]

Late but its m4 and special looking so they are Hard to find

[@Potato37184]

​@@EsR9 no its M5 or M6, there are different tuning carbs with different Threads

[@rocket7314]

czg mowiisz po angielsku??

[@MiniBikesStore]

tak

[@kacperszawarejko7103]

Ziomek czemu mówisz po angielsku??

[@jb-img1638]

bo się uczy w taki sposób , tyle że z akcentem coś nie tak mu wychodzi .

[@aleksshelby777]

Ты говоришь по по-русски у меня есть к тебе вопрос

[@jurijs1905]

Idi na shkolu 🤣

[@brajannieinterere8667]

Dlaczego mowisz po angielsku a tytul po polsku ?? Moze chociaz napisy po polsku dasz bo ni chuja cie nie rozumiem

[@MiniBikesStore]

sorki, musze po angielsku mowic, chociaz wolalbym po Polsku