CARCARE24.EU | POLISHING BLACK PAINT | MENZERNA 400 2500 | VOLKSWAGEN TRANSPORTER | CARWASH SWIRLS

[@vr6piloot]

Menzerna net ontdekt! Fijne polish, ik heb het merkloze pads gedaan, hebben jullie de Menzerna pads ook getest?

[@wheelerdetailers]

Idd mooie lijn aan polijstmiddelen. Jazeker we bieden deze ook aan op onze site, fijne pads

[@BADMOPARCZ]

I tried products from Meguiar's, Rupes and others but the final result is not even close comparing to Menzerna on my black Dodge Challenger. Let me ask You one question. Where You get Your detailing cart?

[@wheelerdetailers]

Tnx :-) Detailing Trolleys can be found here; www.carcare24.eu/en/workshop-garage-equipment.html?p=2

[@tonygoshive785]

I use exactly the same Polish and chemical guys orange pads for heavy cutting, Then move onto finer polish and pads but I can’t seem to ever get All the swirls out. Any advice please ?

[@wheelerdetailers]

Hi Tony, jst thinking out loud; can it be your armmovement goes too fast? Or you may be using a little too much polish for the surface you are working on? These are suggestions, not saying this is it :-)

[@tonygoshive785]

@@wheelerdetailers thanks for The advice, you are right, Sometimes I do use a little too much polish. Will keep trying. :) do you have any advice on chemical guys most aggressive pad, is it too aggressive on most paint?

[@wheelerdetailers]

@@tonygoshive785 from Hex Logic we always used orange and gree the most on modern german cars (most popular in our area). from the new D Con Delta Pads we use a lot green and yellow. If you want it aggressive (and the paint is thick enoug) check the Twisted Wool Pads from Rupes.

[@tonygoshive785]

@@wheelerdetailers thank you so much for the advice :)

[@g1an_nis]

Brand of pads?

[@wheelerdetailers]

Hex Logic