Thanks for posting this. Just serviced and fitted an HEL brakeline to the passanger side rear brake of my 2023 2.3 Ecoboost ST4 with no dramas. I unplugged the brake at the caliper just for good measure. Drivers side to do tomorrow night.
@hirayaman2462 ай бұрын
Do you still have the oem brake discs on your ST? Im thinking about changing mines
@JasonMaximHall2 ай бұрын
I replaced the front with EBC discs and pads. The rear ones I left the stock ones in. It had only done 14k miles at the time and they were fine.
@hirayaman2462 ай бұрын
@@JasonMaximHall Did you experienced any warping ? I have some steering vibration while braking at high speeds ( above 200km/h) which doesnt happen at lower speed at all.....
@JasonMaximHall2 ай бұрын
None of the pads had been out in two years before I bought it. The front discs were quite worn. The steering wheel would oscillate up to 60mph. Braking was smooth, just vague, spongy and wooden feeling. Much better now.
@hirayaman2462 ай бұрын
@@JasonMaximHall Got it, mine was good before de dealer changed my pads. He put oem just it doesnt break like before... Since i dont have acces to EBC, i might consider other setup
@andrewarmstrong47103 жыл бұрын
Awesome thanks for this. Spent 20 mins on the diagnostics computer looking for it 😂
@algebe56794 жыл бұрын
Thanks for sharing! You saved me! Now the official service will have to wait for me a little bit longer! Thanks again! :)
@johnw6795 Жыл бұрын
Thanks very much! This just did the business on my 2017 Ford Galaxy 👍
@terryholdaway89626 күн бұрын
Proper helpful video thank you 🙏
@SYDiagnostics4 күн бұрын
Glad it was helpful!
@SlowedReactionАй бұрын
If you’re struggling to get it out of service mode…. Like I was…. The brake pedal part, press down on it hard for 3 seconds. I was stuck for 2 hours trying to get it out and this sorted it
@matteobrovedani10617 ай бұрын
Thank you very much! It really helped a lot! Couldn’y find the Way and with this video I could change the rear brakes of my Focus!
@Mickyrst43 Жыл бұрын
Thanks for posting this video!!
@richardlympany6732 Жыл бұрын
Simple and too the point, many thanks for this.
@evansmarts7754 жыл бұрын
Lovely garage excellent video thank you soo much 👍
@bennoben16532 жыл бұрын
Great video , and information, thanks for sharing 👍👍👍👍
@joejefferson9050 Жыл бұрын
Great video thanks for the help 👍👍
@gabrielapereirahennau809 Жыл бұрын
Once you ve done that can u push the pistons back without elektronic procedure? Just push them back? Thanks
@SYDiagnostics Жыл бұрын
yes
@gabrielapereirahennau809 Жыл бұрын
@@SYDiagnostics thanks 👍 is it the same procedure with a key? It’s not with a start/stop button (not keyless)
@SYDiagnostics Жыл бұрын
@@gabrielapereirahennau809 I can't see why it won't work
@xfileswilly3 жыл бұрын
My car will not come out of service mode and seem to have a number of brake related error messages. Any suggestions as to where to look?
@SYDiagnostics3 жыл бұрын
What fault codes do you have stored?
@xfileswilly3 жыл бұрын
@@SYDiagnostics Had to fire up Forscan in the end to get out of service mode. Unfortunately didn't record the fault codes but do remember having an ABS, Steering position and Handbrake errors.
@clausluhning8443 Жыл бұрын
Also had a problem with it not wanting to come out of service, it ran the pistons back in and then nothing more happened. ended up having to run the caliber back a bit with a battery and then it went out of service the first time I tried again.
@theo399510 ай бұрын
Hi. EPB? I HAVE START/STOP BECAUSE FORD FOCUS MK4 2019. PLS. Steps for this case. Thx
@CarsExposed4 жыл бұрын
Nice to know Steve thanks for sharing it mate 👍👍👍
@SYDiagnostics4 жыл бұрын
Thanks for watching and for your comment
@dorucroco4572 Жыл бұрын
Excellent. It works BUT!! Only if in max 3 sec you repush the ignition. 5 seconds is too much. It took me few good attempts.
@sitdox4 жыл бұрын
Great video as always It just reminded my customer with an Audi A8L he decided to have go at rear pad replacement 😂 offside rear calliper gave a ghost immediately near side one was a bit more resilient to custard attack gone dead after about eight weeks 😂 He saved a lot I guess Callipers over £300 a pop plus labour 😂 You take care mate and stay safe these funny times
@leso2044 жыл бұрын
Yeah a friend is having issues with pad change in an audi , new tech crap .....
@sitdox4 жыл бұрын
@@leso204 wouldn’t say that it’s very easy if you follow the correct procedure
@leso2044 жыл бұрын
@@sitdox It's easy when the software plays ball, when the computor says no your screwed diagnostic software can be a contrary animal, also auto manufacturers not putting out software to none marque garages on purpose ............
@benlomax75138 ай бұрын
Do you know if this is this the same for the Mk3 Kuga? And is it required if replacing the front brakes?
@sitdox8 ай бұрын
@@benlomax7513 don’t think so should be just plain regular setup
@jameswilliamson8050 Жыл бұрын
Great video , thanks for sharing 👍👍👍👍
@RICH68262 жыл бұрын
Does anyone know if the rear pads need rotating and pushing in like typical non e-brakes, or is it just pushing only?
@SYDiagnostics2 жыл бұрын
once the mechnism is retracted electronically, the pistons can be pushed back and don't need windin back.
@IAMNOSLEEP4 жыл бұрын
Thanks for sharing... Cheers.
@DORELTEOАй бұрын
Excelent 🙏
@et90632 жыл бұрын
Hi Steve I.ve recently bought a ford focus. The dealer tells me there is no way to programe the settings for the electronic handbreak to activate automatically when the car is switched off. Is this true? Regards
@SYDiagnostics2 жыл бұрын
I have a 2020 focus which has auto hold. But when I turn the ignition off the parking braking brake automatically engages. And disengages when I drive off. Not sure if auto hold is the key factor
@et90632 жыл бұрын
@@SYDiagnostics thanks! I tried with the autohold botton on but it only activates the handbrakes sometimes, for example in flat if i stop slowly and switch the car off it doesn.t.
@SYDiagnostics2 жыл бұрын
@@et9063 I'm currently on vans, but when I next see a focus mk4 I'll take a look
@et90632 жыл бұрын
@@SYDiagnostics thanks a lot! By the way what.s mk4? A model?
@SYDiagnostics2 жыл бұрын
@@et9063 2019 onwards
@ashrafabdulla74044 жыл бұрын
Thanks for sharing 👍nice one
@richardkelly30968 ай бұрын
Awesome saved me hundreds ££££
@jakobkvist1751 Жыл бұрын
Do you know if it is the same on cars with automatic gearbox? tried the procedure, and got it in servicemode. But now I cant get it engaged again?!
@SYDiagnostics Жыл бұрын
yes it should be the same procedure
@NicolasT36 Жыл бұрын
did you solved this issue ? I have an automatic gearbox too and I don't want to start procedure without being sure of what I do lol
@theo399510 ай бұрын
Is that if park break don't work???
@henryklanger82452 жыл бұрын
Hi. Und wie soll ich das machen mit Automatik Getriebe 🙏
@MuratKykn4 жыл бұрын
Thank you SY
@DansDiagnostics4 жыл бұрын
Nice Video mate 👌
@CARRJ1423 жыл бұрын
Another great video.
@SYDiagnostics3 жыл бұрын
Glad you enjoyed it
@21stcenturydog872 жыл бұрын
Thankyou for this big help
@mhakanardal6 ай бұрын
Don't do without reading this ! There's some steps missing for deactivating maintenance mode. I've just given a try for activating maintenance mode. Now they're now really in maintenance mode. But, I can't DEACTIVATE maintenance mode as described here. Focus 2019 automatic.
@simolace525210 ай бұрын
For mk 5 2021 the same process?
@SYDiagnostics10 ай бұрын
I no longer work at Ford, however, I can not see the process being any different
@sibriers52544 жыл бұрын
Do i leave the car in gear while doing this to stop it from rolling while handbrake off?
@SYDiagnostics4 жыл бұрын
You'd usually be working on the rear brakes with it jacked up. So I'd have the from wheels chocked or left in gear
@sibriers52544 жыл бұрын
@@SYDiagnostics ok thanks, I'm looking for a fix for my 2020 Ford Focus ST Line, had a warning message 2 days ago saying Park brake melfunction service, now. Got in touch with Ford they are going to pick it up Friday for me to look at, seen this fault on KZbin but no real answer. Hope you can help? Thanks
@SYDiagnostics4 жыл бұрын
@@sibriers5254 i've not seen any issues yet, but have heard of park brake motors failing
@sibriers52544 жыл бұрын
@@SYDiagnostics i keep getting this warning message Parking brake malfunction service now but parking brake seems to work , warning light and message, warning sound on as soon as i move car.
@piotrhrabowski5232 жыл бұрын
Hi itd can be work on KUGA 2017 2.0 TDCI
@SYDiagnostics2 жыл бұрын
i dont think its the same process, there is a process for the kuga and will look into doing video
@canalsemnome69803 ай бұрын
Thanks
@leso2044 жыл бұрын
The issue i have with the new electro park brake is there is no manual lockout , & if the OBD has a female moment and wont go into service mode you are screwed as a friend has found out ...........
@SYDiagnostics4 жыл бұрын
i dont understand ? manual lock out? this methid requires no OBD. On the Focus Mk4 the motor can be removed and the park brake wound off manually
@leso2044 жыл бұрын
@@SYDiagnostics on differant makes some require service mode activated by OBD , by lockout i ment a safety lockout tool, sorry to confuse with other makes was just making a point not impressed with all this new tech' the case in point is a Audi A6 OBD refuses to go into brake service mode it's ongoing at the moment for a solution , in theory you could have the same issue with a ford if the peddle ignition combination input did not work ........
@billyyoder81714 жыл бұрын
Thank you SY. Good job again. I wonder if this procedure is the same for other models of Ford's. Have a blessed and safe week to you and your family.
@SYDiagnostics4 жыл бұрын
ive found its a bit hit n miss to be honest....works on mondeo, i couldnt get it to work on edge
@barrylawson90484 жыл бұрын
Didn’t know this was an option.
@SYDiagnostics4 жыл бұрын
easier on forscan.......but for those who dont have access theres this option
@Grindhousewatch2007 Жыл бұрын
kzbin.info/www/bejne/gZyri6Ssl9V7qJI New Version for Ford Vehicles with EBB Electric Brake Booster, important if you want to press the Caliper cylinder at the front axle,if you want to change Brake pads /Rotors.