Excellent video! Advice, review and reinforcement on the product and additional products that are “toppers”.
@EricRains2 жыл бұрын
I appreciate you offer people cheaper alternatives to detail products thanks!
@therealevo772 жыл бұрын
Nice job in breaking down the process! It was done in a easy to understand way that the majority of newbies should understand. Curious, did you ask the customer how he has maintained his vehicle during the past 12 months (how often has he washed, products used, etc.?) Based on the water behavior before/after washing, it looks like he/she has done a pretty good job. I see that you used Reload as your topper essentially. Personally I have never liked Reload. It just didn't do much for protection or anything at all really. And others, like ScottHD, have shown it doesn't last long either. Your other suggestions are much better. I do also enjoy Xtreme Solutions Topper. This surprisingly does very well for protection. I'm enjoying your content. Keep up the good work!
@TurnerMobileDetailing2 жыл бұрын
Thanks man! So like most customers, they don’t totally keep up with maintenance like they should. This particular client does wash his car about once a month. If I install a Cquartz coating I always give the customer a bottle of elixir for monthly maintenance, but as far as I could tell it was hardly used. As far as reload goes, idk, I used that because it was a Carpro coating, and I can be OCD in keeping products in the same family, but honestly I’m not a huge fan of relaid either. I did a 2 part video test including reload and it didn’t do all that great. I’m currently testing 7 more sealants.
@SpaceEngineer_1 Жыл бұрын
Excellent video! Very informative and easy to follow.
@danlc95 Жыл бұрын
Excellent channel. One hell of a detailer too. Great job!
@TurnerMobileDetailing Жыл бұрын
Thank you!
@stephenlouden4803 ай бұрын
fantastic work and explanation 💪 i just did a paint enhancement and uk 3.0 on a used Ferrari F8. cane out great. now let's see if the owner calls me back in 2 weeks to do the 1st maintenance wash 😆 or ill have to follow up and tell him it should be done. if so ill top it with Reload to lock protection in
@TurnerMobileDetailing3 ай бұрын
Thank you! You can put a coating of reload after the initial application also. If you did that you probably don’t need to use reload again after only 2 weeks.
@holybusiness96242 жыл бұрын
Great work and awesome video. Thanks for the detailing education!
@TurnerMobileDetailing2 жыл бұрын
You got it, thanks for watching!
@holybusiness96242 жыл бұрын
@@TurnerMobileDetailing I believe that I will go with this coating or Gyeon Synchro once my owners pride coating fully fails in another year or so. Not really impressed with Owners pride and feel like I got suckered on it. Marketing is a powerful tool. Lol.
@TurnerMobileDetailing2 жыл бұрын
@@holybusiness9624 how long have you jade the OP and what is your issue with it?
@marcg19642 жыл бұрын
I just used 22PLE fine clay on my ceramic coated C8 last week. It is supposed to be safe for coated vehicles. We'll see!
@TurnerMobileDetailing2 жыл бұрын
Different products and situations can yield different results. For me, I don’t do it because the last thing I want to do is ruin a customers coating
@sirliftsalot1154 Жыл бұрын
My Echo PB9010T 1110 CFM 220 MPH blower has never once spit any oil out on the paint and I've used it a couple hundred times on my 2 personal white vehicles and my light silver truck. How do you get the water out of all the crevices and hidden places with a drying towel?
@Cliff10292 жыл бұрын
great video! thank you.
@TurnerMobileDetailing2 жыл бұрын
Very welcome
@benoithebert9399 Жыл бұрын
Very good video bro. Very informative.How much milleage did you do in 1 year, and how often did you wash it?
@TurnerMobileDetailing Жыл бұрын
Thanks! It’s not a daily driver, I’d say about 7k per year, and it’s garage kept. It gets washed about once a month
@robertkrupa32233 ай бұрын
Hi, thanks for the great video! I'm about to paint correct and apply CQ UK3.0 Is tar remover safe on ceramic coatings? I'm doing north of 70k miles a year and I get a build up of tar very quickly. Thanks in advance.
@TurnerMobileDetailing3 ай бұрын
Yes UK should resist tar remover fine. If you’re going to use it often though, I would make sure to keep a topper like reload on top of the UK so it takes the brunt of the tar remover instead of the coating. I recommend Citrol 266. Not all ceramic coatings are super chemical resistant, but UK is good.
@EgelCarigma2 жыл бұрын
How’s your new pressure washer holding? Any video update on it?
@TurnerMobileDetailing2 жыл бұрын
It’s good, not great. I’m gonna do an update video ate the end of the summer. I’ve had some issues with the motor turning over. I don’t know if it’s a bad switch or if it’s a power issue from a clients home. I’m investigating and working with AR to solve it. Stay tuned and thanks for watching!
@marcg19642 жыл бұрын
Really like the graphics. Was that iron remover in a spray foamer or straight sprayer?
@TurnerMobileDetailing2 жыл бұрын
Just regular pump sprayer, no foam
@denzeljackson6505 Жыл бұрын
I thought one of the points of putting a ceramic coating was a easy wash this is more than what i do now and my car is not ceramic-coated
@TurnerMobileDetailing Жыл бұрын
This is an annual/semi-annual maintenance detail, not just a wash.
@acesuasola1500 Жыл бұрын
thoughts on 2 coats of CARPRO CQUARTZ UK 3.0 then 1 coat of SiC and then a coat of gliss top coat kit?
@TurnerMobileDetailing Жыл бұрын
I don’t see why not. The added layers should give longer longevity. Although I believe Carpro says no more than 4 layers, but you might want to double check that.
@jasonmckenzie31462 жыл бұрын
What sprayer handle and hose do you use for the pressure washer? Also is that special end on the sprayer? Thanks and great vid!
@TurnerMobileDetailing2 жыл бұрын
Thank you! Check out this video, kzbin.info/www/bejne/pHvHaqWrir2lq5Y. I believe I answer all your questions and there are links to the products your asking about. Let me know if not.
@jasonmckenzie31462 жыл бұрын
@@TurnerMobileDetailing thank you I will
@TITAN9389 Жыл бұрын
What about Carpro Hydro2 ? instead of Reload
@TurnerMobileDetailing Жыл бұрын
Sure you can use that, it probably won’t last as long as reload, but it’s easier to apply.
@jorehaast98873 ай бұрын
Coating still going strong?
@TurnerMobileDetailing3 ай бұрын
The car was sold, but I did detail it around the 3 year mark and it still looked good.
@jorehaast98873 ай бұрын
@@TurnerMobileDetailingbut is the coating that good or does the car drive not that many miles?
@TurnerMobileDetailing3 ай бұрын
Will it’s rated for 2 years. The third year comes from polishing first with Carpro Essence. This car did live in a garage when not being driven, and as far as I knew it was driven about 3-4 days a week, if not a little less. So draw whatever conclusions make sense. I have seen this stuff get 2 years on a daily driver that loves outside though. It’s my fave consumer coating.
@jorehaast98873 ай бұрын
@@TurnerMobileDetailing it is great indeed. I’m looking around which coating I should use in my business. Thanks for the info!
@TurnerMobileDetailing3 ай бұрын
You can’t go wrong with Carpro coatings. They’re quite reputable