Reviving our Hovercraft with a 2X Horsepower Engine Swap! (It Rips)

[@adamwolfy4826]

Now you just need more pitch on the props to make use of that power :)

[@ToplessTattoo]

And clean leaves

[@ghomerhust]

@@ToplessTattoo yeah might have to run the mower around and bag all that up haha

[@2001airrun]

Definitely, they could get lift at way lower rpm and be more controllable.

[@jrburnsjr8431]

You said it for everyone else on the channel ty

[@mattsentowski]

For sure. More wind!

[@Rob1970s]

You both might not think it but this here hovercraft is definitely a great thing to have. They come in all sizes.. and this one in particular is absolutely a go cart without wheels. The faded paint is not faded paint .. !!!! It's actually in the fiberglass . A cut and polish will bring it back to shiny red . It's gel coat. It's mixed in with the fiber glass. What y'all need to realize is that to turn y'all need to have thrust pumping through those rudder's. Also to stop quick just throttle off. When you throttle off that is the brakes... It'll drop down straight away and stop really quick. Y'all need to sit down on the motor cycle type seat and when cornering lean over just like a motorcycle... So just get out there and don't be afraid to open it up.. because that's when you will have thrust pumping through to turn and hover... They do slide sideways when turning at speed but once you realize that you have to lean just like a motorcycle you will notice that the lean will lift up the outside edge and the inside edge your leaning towards will grip the ground or water . They race these things and personally I love them alot !!!! I don't own one but I know how to operate one.. just like riding a motorcycle !!! If you lean forward the nose will slow it down and the air will all go out the back of the skirt.. please PLEASE don't give up on it.. please just do some research,,ie look for hovercraft races on the W.W.W and y'all see WHY I love them so much... Remember gel coat will come up like new with a cut and polish.. I think it is "a great " advertising platform for CARS AND CAMERAS... It's got plenty of power now so you can add lighting etc .. take it out on a big open area and open it up !!!! Ride it like a motorcycle.. an hour or two you will realize just how fantastic this is.. thank you sincerely for all your time and effort to bring us this exciting content.. I truly love CARS AND CAMERAS . 100%. 10/10 in my book 👍 ❤❤❤

[@rcclassiccrawlers4368]

I’m assuming what you mean by cut and polish is “wet sand and buff”. I would use at least 600 grit wet/dry sand paper with warm water and Dawn dish soap mix.

[@DavidReynolds-kr6yh]

Gel coat is just like paint, it’s a layer on the outside of the fibreglass. It can be polished just like paint using a cut and polish compound. And if it isn’t in very good condition then more can be purchased from either a specialised fibreglass store or even from a boat shop, it can be sprayed on, though it’s thicker than your normal paint and the spray gin needs to be cleaned out straight afterwards with acetone.

[@stoddern]

Sad to see Chuck gone but he has a family to support, hopefully he has time to visit, love his humor

[@jerrywilcox9890]

It's Charles lol not chuck.

[@andrewgee241]

Charles has been in every video since the announcement he left.

[@dominicrichardson5546]

​@@jerrywilcox9890 chuck is short for Charles

[@TheUncleRuckus]

He was in the episode, he was on the right when they put the engine back in. It's like a where's Waldo except it's Charles. 😂

[@eriksimca9409]

@@andrewgee241 obviously because the videos are posted out of order, these videos where probably made before he left

[@imasmartidiot3330]

Time to put a little more pitch in the blades to push more air

[@darrenmobley6000]

Exactly what I was thinking

[@abergethirty]

It looks like there are spots to attach more fan blades too.

[@SHSPVR]

Not only that it looks like the rutters are a bit too short

[@Rob1970s]

There's a fine line between to much pitch and to little. There's huge clubs that race these things and y'all need to investigate a wee bit because once you see them racing them you will see how there supposed to be ridden.. also the clubs will have all the secret little bits of knowledge .. like the perfect pitch.. (etc etc)

[@imasmartidiot3330]

Yes but he had it set up with very little pitch with the little motor now the bigger engine can push a little bit more air so you may have to readjust his pitch

[@overyonderjustapiece]

Enter and exit the water at full throttle for max lift. Makes transitions a whole lot smoother.

[@timb9212]

Yes more throttle equals more air out the back and the bottom

[@teaganthornbrue]

@@timb9212 don’t think he needed you to explain his comment

[@timb9212]

@@teaganthornbrue did it anyway

[@miller4057]

You’ve all came along way since dad’s garage!!! LETS GO!!!

[@ernestthomas3965]

Was that Charles lurking in the background trying to hide from the camera?!😂😂

[@Wazaarbazaar]

Working on something else

[@DefenderOfVirginity]

charles is always lurking. he's just a lurker🤷‍♂️

[@maverickkartracing]

I wonder if making extensions for the rudders would help the turning

[@MrFaderdes]

Take it hovercraft racing 😊

[@856Dropout]

More power means you need to add blade pitch

[@SportbikerNZ]

They would have had that plan in mind before buying the new engine. Part of the process is running as-is to see where you stand.

[@mikefalcone9157]

Awesome move Ike! But I want to tell you as a friend and native Buffalonian, and connoisseur of 2 strokes and snowmobiles, that you may want to use that oiler. They offer far superior oiling to the crank which would be HIGHLY beneficial to long periods wot operation. Ontop of that it is jetted for straight gas not premix you are leaning out the mixture! Not good for 2 smokers!! If you dont want to use the oiler because of yhe extra room it will take, at least put bigger jets in it so.its not running lean wide open! Love you guys!!

[@suzukiman650]

And surprise, they burned down the engine because of exactly what you said.

[@AbernathyPJ]

Add two more rudders at the edges of the fan shroud - total of four, and the full hight of the fan.

[@trygvehaglund6519]

Do some research and see if making the rudders longer (in the air flow) will add anything as well. Just a thought. Enjoy that machine! Thanks for the content.

[@mathieulachance151]

I can’t be the only one who’s absolutely loving the hovercraft and seeing you guys work on it !!!

[@shk2564]

I was pretty impressed by Ike driving in the tight area of the yard! It’s not easy! ❤

[@Dkote3]

*Cleetus Mcfarland heavy breathing intensifies*

[@Sm0kEyX420]

Cleet just bought a 6 figure helicopter, don’t think he cares… 😂

[@Dkote3]

Helicopter, Hovercraft, Both big fans. Same Same, but different!

[@joegti10]

lol referencing cleeters flying over the handlebars.

[@aceneto9386]

They didn’t ls swap it so he don’t care lol

[@miller4057]

Cleet is humble!!! He loves Cars and Cameras!!!!

[@entrluzrnaam]

Watch videos of how pros race these things, lots of shifting your weight far to the side to steer tighter. Gotta send it around the Grand Prix of course. Quality stuff as always

[@ProlificInvention]

Busco Beach for sure, it would be fun to put a long YANKUM kinetic recovery rope (maybe 2 or 3 together) on a center post and do fast circles. It would be fun to try

[@CLCIII]

I know NOTHING about hovercraft. Now I know nothing plus something. As Always, May God Bless you and yours! 😇

[@bryduhbikeguy]

They make allot of noise once started...+2.

[@CLCIII]

@@bryduhbikeguy Righto! And catch leaves! As Always, May God Bless you and yours! 😇

[@chrissd08]

I can only imagine what the neighbors, or anyone driving down that road, think! Great stuff. Good luck Charles.

[@timgoble9891]

That would be a blast out on a frozen lake

[@shadymaint1]

I was thinking the same thing. Don't have to worry about thin ice at all with that thing. Would be great for super late season ice fishing.

[@artokiiskinen1058]

You need to use this for leaf blowing. Race against a leaf blower for clearing an field

[@christiancooper478]

This brings a whole new meaning to off reading for you guys. When I was a kid they would bring in this dude with a hover craft every summer. Thing was the place they brought it was this waiting pool so there wasn't much to see him do other than do a couple dough nuts. Either way that was cool and they haven't done that event in over a decade. Hover crafts has to make a comeback. Please help make that happen!!!

[@tmason4051]

I put a VW engine in one of these. It's like driving a giant air hockey puck! Kudos!!! What a blast!

[@benknapp2]

Now let’s see you getting it looking as good as it runs!!! Great job guys. Can’t wait to see what’s next!

[@soundsidetoursnc]

John is so scared all the time Lol. Issac is like no problem it’s fun lol

[@fortyfukinseven]

For reals. Sometimes you just gotta send it. They have plenty of pads. I have a feeling he probably had some bad accident in his past and has minor ptsd.

[@mrb2917]

@@fortyfukinsevenhe got dropped on his head a lot as a baby 🤯

[@jeremymackevincaylor5041]

Y'all should have been watching from the beginning when John was double the size that he is now and he was absolutely scared to death of anything if anybody even moved quickly John would jump. The first time I seen them years ago I said Lord how did Isaac and John even meet their two completely different people this will never work

[@guacam4ya103]

Idk I've seen John rip pretty hard lol, he's not scared he's just cautious. Probably has avoided a lot of damage/injury because of it

[@98wytebird]

He is a pretty boy. He just likes to hold the camera lol

[@jmrides777]

Isaac, Now when your property floods again, you can look forward to going for a rip!😅

[@LoneRevD]

Awesome. You know when you have a gap like that, take a old rod from a arc (stick) welder if you have some and knock the flux off it. place it in the gap and weld across it with the mig to bridge the gap. Just a thought, cool content thank you!

[@puffypanda7516]

If you took the leafs off the fan guard, I think it go better

[@kevinleee3408]

😂

[@K.J.Ray421]

Maybe, but if they don't take the leaves off of the engine fan, they're going to cook it for sure. EDIT: For once, commenting before watching the whole video wasn't a bad thing. I called it! But there could be another reason why it blew up though.

[@SportbikerNZ]

You think they don't know?

[@kevinleee3408]

@@SportbikerNZ depends on if they ate special brownies that day

[@mackfauber]

Still needs more prop pitch! No matter how much hp you put on it, it's never going to get the speeds that it can reach. Like I said in my last post I had the exact one with a 35hp Rotax and with 1 person ran 45mph, mine ran faster at half throttle than yours. I also know from experience that to many rpm's can break the blades or strip or break the drive belt by over reving the engine. Good luck!!

[@iannorton4463]

Sorry guys I have never done Facebook and I won't. But,,you can do all sorts of great stuff with the hoover craft 👏.. ✌️👍🇬🇧

[@HickabillyTim]

Pretty cool leaf blower 😂

[@alastairchestnutt6416]

Have a river trip. I've had hovercraft, with rotax engines, a 377 and 503 twin carb. Great fun! Went down the Upper Bann river in Northern Ireland from Portadown to Lough Neagh. I'm not sure if you were over the hump while on the water. The craft creates lots of spray and does not go very fast if it's below hump and still acts as a displacement craft rather than an air cushion vehicle. There are look up tables for the fan so that you can have the engine loaded correctly for the number of blades and the pitch angle of the blades. Enjoyed your 2 videos. Thanks

[@squarebodycasewademckenney6190]

Those skidoo/Rotax snowmobile fan cooled engines are great, they are reliable and powerful for what they are, and the colder it is the more power they make they like it around 10°f...I got a 2003 ski doo 380 fan cooled and I can move along at 55mph fine (I've hit 70 before) and it gets up top speed quick

[@boltonky]

So cool, built a hovercraft when i was young and wanted one again ever since. Did seem down on power for the size of engine but as someone said props may need adjusting and i was taught to think of it kinda like a motorcycle you have to use power and lean to get it to turn. Either way have lots of fun and be safe :)

[@kekerc9944]

Agreed with the added pitch.....the second thing noticed is in the water you can see the balance of the machine is tail heavy which lifts the front and blows air from the skirt out the front like an air brake...the added pitch may force the front down but i don't know if it will be enough for engine weight compensation it may require 5-10lbs of lead at the very tip of the craft for max leverage. Looks fun..... definitely needs more load on the motor

[@snipatwitch4203]

yall are the main reason i buy old stuff to rebuilt u enjoy it way more when u work your ass off

[@bigdaddy12122]

Cutting the pipe shorter would shift the powerband higher in the rpm range which would only add more power if the porting can support it. ****One thing to take in to consideration is if you plug the injection pump and mix your oil in the gas then the engine will run LEANER as a result because some of what should have been gas is now oil.**** A lean 2 stroke is a fine line, either a bat out of hell or a melted pile.

[@ERKNEES2]

17:53 what a great toy for your guy's hard work over the years! Please stay safe! 🙏 love yall

[@gradybrowning3976]

That thing is cool as a fan!

[@EricUdell]

I've ridden a few of those a couple of times, even blew up a motor. A few tips I might offer you guys. 1. Weight is important for control. You may have noticed that the hovercraft turns if you don't have your weight centered. Take advantage of that and sort of shift your weight like on a snomobile or ATV. 2. You might want to look to see if you can find a few more blades to add to the fan. 3. When on the water, you need enough speed to get over the hump of water in front of you, just like a planing boat. Just like said boat, once you get over it, it'll get a lot faster. 4. You guys noticed that shutting off the throttle on land can involve an abrupt halt, it's kind of worse in the water. The skirt and the bow can dig in. I'm sure you guys will get the motor fixed, have fun with it!!!

[@neillambton4065]

You need more pitch and surface area on the fan blades, plus larger surface area on both rudder blades, and then put some ballast in the bow to help her run more level, meaning you won`t be dragging the stern through the water. She rode more level on the hard land surface, but steerage was poor. Definitely try more surface area on the rudder blades. Maybe attach some extension strips down the rear edges of the rudder blades?. Great vid guys, good to see a couple of good old boys having so much fun.

[@brad08stanggt]

I love the new video format, content etc. but I really missed the build footage of the engine mounting, etc. I would watch the longer video but I know I can't speak for all others. Long time subscriber. Rock on!

[@quevicular]

When I saw Charles sneaking around in the background behind the hovercraft at 8 minutes and 30 seconds I almost yelled out "hey Charles"!! right through my phone screen. 😂 It was weird. You guys need to put a big Mr Hankey underneath the scat logo😂

[@jonard7037]

🤣🤣🤣 Its a ride-able Leaf Blower !!! Some hot laps on the Grand Pre would be cool to see in that thing. This is awesome!!

[@kenadrianbouler372]

I just seen Charles in the shadows ducking and bucking lol. I’m happy to see him. Best luck to you fellas in life. Thank you for the great content.

[@TedPierson]

Imagine how much more performance you'd have once you remove all the leaves off the intake grate!

[@gilbertnowak5770]

I knew a guy in Green Bay Wisconsin who had a Scat Dealership and Brought 2 out to the river not far from my house. When they were Brand New they ran Exactly like that one does NOW! That old engine was Plane wore out! I hope you guys did no do too much damage when you ran it with NO Aircleaners on it's maiden Voyage.....

[@jimseals8659]

I have around 200 hours flying behind a 503 Dual Carb on a flightstar UL Great power there

[@stuartburgess366]

Add some extensions to thos 22:24 e rudder blades to full height & tweak those blades a degree or two & lean forwards more over the bars when on the throttle it'll be race craft heaven😂😂😂😂😂

[@irondefiance2758]

I've missed these style videos alot, just you and Ike working on stuff. Resubbed

[@danzamp9761]

Wrap the exhaust, put more pitch in the blades and have some fun

[@wags9777]

And now it's time to dial in the pitch of the blades

[@nineteenandfortyone]

That'd be great in the winter rescuing folks on or through thin ice. Good work!

[@trachighfield]

I have 3 of these scats (scat 2's) and they are by far my most favorite toys.

[@crustyguts6141]

I would love to see this thing out at Busco with a sweet WW2 style fighter plane paint job.

[@jogden6632]

The boys have conquered the woods, the 1/4 mile and can now add the sea to that list!

[@jonnyretro2235]

That snippet of Isaac at the end is pretty funny. Love it.

[@CrusaderSports250]

Seeing the directional stability it's a good job hover cars never became a reality, looks massive fun though😊.

[@terminalpsychosis8022]

Wow that thing looks fun. I wonder if larger rudders in back would make it steer better? Be interesting to see what they did with the version 2. Now the thing just needs a powerwash and paint job. Such an awesome toy. The new motor fit like a glove and really did the trick!

[@williamjones747]

Probably go faster if the screen wasn't full of leaves too,looks so fun

[@thebrokenbiker869]

Wow I did not think you guys would get it up and running... Looks cool for sure

[@wheels.3239]

Expansion chambers use sound and exhaust pressure to push back into the combustion chamber, sort of boost with sound waves.

[@bigbaby1177]

The ULTIMATE leaf blower!!

[@billwilliamson9842]

Hey guys keep this in mind for the mini mayhem events please, it would be so cool to get this kind of footage. can we get drone footage this year of everyone takin off for group rides? it has got to look like somethin straight out of mad max lol

[@jimciancio9005]

Wow! That's one hell of a serious leaf blower! It sounds like she needs a little bit more pitch to them blades now that you have more than enough HP to turn the fan? Good luck guys.

[@fulltilthover667]

Yes Leaves on Exhaust is sometimes an issue... I think You never got over Hump Speed which was pretty typical of old scats even with the extra power... just practice get it trimmed and weight low you will have some fun... I have over 30 years in Hovercraft and I still occasionally make bad decisions on a turn and have to do evasive maneuvers but i want to portray the sport in positive light just hardly ever record my escapades anymore. Get the hoverbug and respect the machine!!

[@JohnHill-jm7tm]

2am and this Old Man from Washington NC finally getting a chance to watch with my coffee ☕. Always great video and laughing. Love you guys 🛵🧔💝💝💝

[@DataDawg59369]

Great work guys, and though you guys already did so much to get that thing up and moving again, you might want to consider swapping out that gas motor for a high power electric and increasing the rudder size for a lot more responsiveness and steering control, plus it'll save your ears and be less weight overall.

[@1underground747]

oh man my neighbor had one when i was a kid there so much fun good times great job i would like to see it restored

[@matthaus1645]

Shortening the pipe is going to make that motor spin at a higher rpm. Especially 4 inches. I wrote this before finishing the video. Highly likely that thing melted down because of the pipe modification. I would add that length back into the header and obviously check your main jets. Cool video!

[@bigdaddy12122]

Shortening the pipe would just shift the powerband higher in the rpm range (obviously not ideal but wouldn't kill it), jetting is the reason it melted.

[@matthaus1645]

@@bigdaddy12122 They would need to raise the exhaust port for that change take place. I don't think it will kill it either. I do agree with you just trying to keep it simple. It's going to raise the rpm the motor makes power at. Without raising the exhaust part it's only going to hurt it

[@matthaus1645]

@@bigdaddy12122 I understand fuel is a part of the cooling I drag race snowmobiles When the weather is warmer I jet down. If I was doing something like what they are doing I would want more piston to cylinder clearance to prevent 4 cornering

[@DetroitMicroSound]

One of your more interesting projects, these last few years, for sure. 👍 I'd try to keep away from rocky dirt areas, and stick with grassy areas, or the water. In Britain, when they race, they keep em on the grass, mostly, and usually only cross very narrow bodies of water, so they can keep the momentum up, all the way around the course.

[@marksmithson1414]

Very cool indeed Isaac. I knew that if you got the hp boost you would get it moving. Awesome job.

[@njakts]

In the 90s there were huge hovercrafts going from France to UK and back as regular charter capable bringing 400 people and 50 cars.

[@richardfritz5263]

Worlds most powerful leaf blower!

[@davessparetime83]

Experiment with Prop pitch

[@kenadrianbouler372]

“Ike, it that your biggest fan…..sorry I had to” 😂 ~ Charles

[@Goomer]

Blade angle might still help.

[@informatte]

There has been one of these bouncing around of facebook/craigslist for 10 years (in south florida). With a rotax 635cc engine. I can't imagine how many hands it has been in. I've seen it everywhere from $1000 to free!

[@CarolinaGuy]

Ever since I saw these hovercraft I've wanted one. If it was me I would rebuild and modify it into the ultimate personal hovercraft!

[@jeremymackevincaylor5041]

Please don't waste your money. The only time they're cool is when it Snow's or the first time that you ride it and then the first time you ride it on a lake and then they just keep doing the exact same thing drinking gas and breaking down. These things are way too cool to not see them very often and there's hundreds of thousands of them around they're just all stuck in somebody's building

[@michaelbackhaus7879]

Maybe try bigger steering fins on the back.

[@yukonxl5723]

conversion was more like 18-20 hp (15 + 3-5 cause wrong expansion chamber lol) to 52, but awesome vid, nice to see the thing motoring around again

[@josephwimerYoYoYo]

From an aircraft perspective: You are loosing some "Steering Authority" by having the exhaust change the angle of air coming off the fins. In other words don't let your exhaust blow a different direction than your fins are turning. Strait back, or down would be best. Love you guys! Great content!

[@edwardweisenburg6585]

Awesome ❤ you guys did it. These obtuse machines work best as ice machines for ice fishing.

[@jacobcole6340]

That's how it should have been to start . Great job boys .

[@GioGuitarDude]

Thing is awesome! I wonder if it would benefit from putting a smaller pulley on the fan (top) so you don’t have to rev it so high. That engine definitely makes enough bottom end torque to sufficiently spin the fan pulley faster. I think lower engine RPM + faster fan RPM + steeper blade pitch would make that thing a lot more drivable. It seems like more air is being diverted to the lift pillow compared to rearward thrust than needs to be.

[@AndrewHCann]

Excellent video John , Issac you guys did super on this small hovercraft vechile and engine help lots more to ! Yes have races with and be so cool !

[@bryduhbikeguy]

Not to be mean,but at least we now have proof John's limit of strength is both hands on a bendy straw.At least he's good at holding a camera and witty banter ;), usually. Ok, just yanking your leash John. The crud in the fan shroud shows it's pulling tremendously. We'll still be your best fans.

[@klapaucius77]

That thing is awesome! 503's are bulletproof, we had an old Blizzard 5500 that lasted for years, being abused that entire time! Well done gentlemen! edit: I got to the very end and spit out my drink, maybe that one wasn't as bulletproof! lol

[@adamr9215]

Ike didn’t use the oil injection and you cannot bypass it on those Rotax engines. The oil goes straight to the bearings, and they don’t get the oil they need if you bypass the oil injection. Plus, since the fuel isn’t supposed to be premixed, the added oil is making the engine run lean. As soon as Ike bypassed the oil injection, I knew it wasn’t going to last long.

[@klapaucius77]

@adamr9215 ours wasn't oil injected, but it was also a 1980. I had a 7500 that had an extra reservoir for oil that directly oiled something in the bottom end.

[@adamr9215]

@@klapaucius77 Yea, the old ones were fine. But, if it’s set up for oil injection, then you have to keep it.

[@carlbrown8830]

If you guys want to jack up the excitement factor by a hundred fold, put some wings on the Scat and turn it into a flair craft. They're cheap and easy to make and that thing will literally fly 5 feet off the water! Lots of videos on You Tube.

[@kevinleee3408]

Do it do it do it. Like an ukrainiplane

[@bwxmoto]

@@kevinleee3408 Ekranoplan, but "ukrainiplane" is the funniest thing I've read all day. LOL Thanks for that. 😆

[@lightcapmath2777]

Out-takes are definitively a plus and for those who follow, a chuckle will be heard. DVD:)

[@kellyshilka9860]

That's quite the leaf blower you feller's got there. Like a few have mentioned blade pitch will increase control as well as full fan control blades should increase control, theories to test . But cut and polish with a biike seat and a front counter weight for engine difference in weight will provide a more sit back and enjoy position and learn how much lean/ throttle needed to carve those "aiir waves ".

[@rickburnout666]

It's a shame that you lose so much power running two headers into one expansion chamber, but it still has got more than it needs, it'll be fun when you get the chance to take it on a frozen river for some high speed action. Just don't stall it. Great work, guys

[@mr.twister4345]

definitely restore it, I remember the first video you guys said it needed some fiberglass repair. adjust the pitch of the blades to get more out of your all terrain go cart!

[@JamesFox1]

Longer Fins gives you more stability = the Directional fins that say which way you go , Yea . tighter turns / shorter less of a turn

[@dicktrickle4197]

I agree, longer tail fins, more steering response 👍

[@danielfreeman845]

Amazing upgrade project yall! Great work as always

[@testpilot6954]

To get the best you need to change the pulleys to suit the 503c. Then adjust the pitch and use an anemometer to set max thrust. My scat 2 has a 503 with a gearbox to the fan and it shifts! Even uphill! Great video, much more fun to this old stuff being resurrected than unboxing of Chinese crap.

[@BurchellAtTheWharf]

Hey John 4:00 Time fer an over head crane/ shop hoist

[@neonnerd1364]

You guys should totally get one of those 6 wheel amphibian vehicles and set up a special land/water race with the hovercraft.

[@seymourpro6097]

I remember travelling from UK to France on a Hovercraft that carried about 50 cars. 45 minutes and no harbour wall! The craft simply rose up the ramp from the sea then sat down, then the cars drive out

[@alwenke212]

Seems like more fun than a stuffy ol' tunnel .

[@wurthmannd024]

Blowing leaves off the driveways is gonna be a BLAST now! Hahaha

[@drewlear1585]

Put some heat wrapping on the muffler

[@GearHeadWW23]

Charles at the end 😂

[@timb9212]

2 fat 2 be Charley

[@GearHeadWW23]

@@timb9212 ok.....?

[@thunderbirdracer3603]

I'm old enough to have ridden those new. Leaning is the key, like a sportbike in a canyon..