Chopping a Top - 1953 Chevy Sedan Top Chop. Full Build Start To Finish.

Today Kyle will be chopping the top on the donor car for the custom Chicken Truck project. This car is a 1953 Chevy Pontiac and turns out to be rather difficult to chop thanks to its extra doors and curved back glass.
If you found this video useful and would like to help support the channel, please check us out on Patreon.
/ carterautorestyling
Or you can send us a donation via Paypal:
www.paypal.com/donate/?busine...
#Carterautorestyling #dentrepair #migwelding #classictruck #classiccar #restomod #restoration #customcars #hotrods #classiccars #cars #fabrication #metalworking #automobilererpairshops #bodywork #autobody #autobodyrepair #rustrepair #car #classiccars #hotrod #behindthescenes #sheetmetal #custom #metalshaping #fabricating #classiccar #metalfabricator #metalfab #trucks #gmc #chevy #tigwelding #beadroller #ChickenTruck #kustom #bondo #bodyfiller

[@MAC-ws8fz]

Mr Cater sir, you have finally pissed me off! Yes, it's your car butthink in the future and what do you have? A POS! I won't watch you fu-k up a beautiful work of Art!

[@scottcates]

Finally, the voice of reason.

[@WildWestGarage]

?

[@lawrenceessard4086]

Great job in a short time well done, great project car .😊😊😊😊😊

[@j.d.m.3287]

due to human caused global warming, this modification is being hailed by throngs of idiot scientists as improving fuel burning emissions through weight reduction, while, keeping a stylish swooped over bubble look

[@Butcherbuilt]

Better to be pissed off than, you know, the other thing

[@chrisconrod9560]

The flow of the roof to rear window to trunk is ten times better than the original.

[@CarterAutoRestyling]

Thanks!

[@yoshisaidit7250]

@@CarterAutoRestyling Can you tell me about that bondpro filler you used? Where would I get some of that? I tried looking it up but found nothing on it.. Can it be reheated and set again? Or was that something else you were using on the car? 40/70 lead solder? I've never done this, but I want to now.

[@lesnewsom6000]

Kyle, your half-ass effort is 300 times better than many folks’ best effort.

[@Pedroisanickname]

Kyle, this is the video that is going to make you world famous, even more world famous than you are now so be prepared.

[@kingtut5923]

My thoughts also.

[@tomc2748]

💯 percent

[@dennisvangemst8714]

Haha the intro was brilliant

[@lawrencehalpin6611]

Thank you Mr. Carter. Way better than TV.

[@Grey_Beard72]

That looked pretty darn good in the end.

[@chrismead4337]

I never thought I would say this about a 4 door but, that looks AWESOME! ❤

[@jonakee342]

You are a master craftsman! Very clean and looks amazing.

[@Danny.Spurling]

Lol Bad Chad impression is spot on

[@justanoldman697]

Your playing around is more than most backyard bondo babies could ever dream of doing. You're relatively young yet. Your talent exceeds your years! Your lead work is top-notch.

[@billnlori3149]

The Bad Chad spoof was great!! This project looks so cool! The old school methods were neat, they just made do with what they had.

[@brianandlindafairchild1237]

I don't know crap about body working, but my uneducated eye will give you an A+.

[@donstaples1102]

You were born too late , my friend . The old guys didn't have anything to go by , like you didn't . Great video Kyle brought back a lot of memories , thank you ....

[@CarterAutoRestyling]

Thanks! Glad it could bring back some memories for you!

[@user-lj1hi4xh6o]

Kyle, this is a super Duper job. The haters are jealous.

[@shedbythetracks]

Bravo Vile Kyle! And magnificent camera work by Trixy Tripod. That was the best cutting up, then welding it back together before cutting it all apart again that I have ever seen. Of course, you probably know that you have ruined your life... people are going to be begging you to save it now. Geez... you just don't know when to leave the bear alone do ya... I can respect that. Cheers from a shed, by the tracks, two doors down, on the left, in a secret location.

[@CarterAutoRestyling]

The backlash is going to be worse than the time you and Flivver got raided by the youtube copyright police!

[@shedbythetracks]

@@CarterAutoRestyling That will be tied up in court for years.

[@glennnickerson8438]

May I propose Mr. Carter that when you have had your fill of this project that you donate it to a certain subscriber in Iowa... It would look great next to a certain Shack By The Tracks!😎

[@shedbythetracks]

@@glennnickerson8438 😁

[@hansblooeyribbon4207]

Best Episode Award! Congrats

[@CarterAutoRestyling]

Thanks!

[@bobgershey5584]

Ha! Ha! When Kyle is having fun it makes for excellent content! 😆

[@CarterAutoRestyling]

Thanks Bob!

[@gymshoe8862]

I bet your phone will start ringing from California car dudes wanting to bring you home as a pet. Your car went from not-worth-much to being worth top dollar because you made it one-of-a-kind! You have the Midas touch, man!

[@Afrodizyak47]

Even through my 75 yr old eyes in Perth, Western Australia, it looks the goods.. I only wish that I could have the talent, knowledge and skills that Kyle brings to us via his videos. As we say in Oz: you've done a bonza job on this, Cobber!

[@CarterAutoRestyling]

Thank you!

[@richardholland7070]

@@CarterAutoRestyling Same from me in Pickering Brook Western Australia. I have learned so much from watching you Kyle, I'm very grateful you post these videos, keep em coming cobber.🤗

[@billyporter2195]

Absolutely brilliant chop Kyle one of the best I’ve seen on KZbin, really convincing, you must finish it now👍

[@gymshoe8862]

Looks finished to me!

[@billkasten1004]

Like the spin on so mad sad chad an pristine trailer queen!!!

[@TimRiley-ki3ei]

What a fun project. Very inspiring!

[@Icebuntrucker]

A different world of skill to The queens other half , Keep up the good work Kyle .

[@bossdog1480]

Senor Carter. You are a master metalsmith without a doubt. I know you joke around, but that is a sign of a true genius, being able to disguise talent with humour.

[@SmittyInVegas]

I would like to thank tripod Trixie for doing such a wonderful job. Filming and editing. Yours truly. SIMPY the virgin❤

[@christianheidt5733]

🤣🤣🤣

[@mayberrymodelmadness5838]

First thing, hilarious!!! I'd also like to add that this is one of the best demonstrations that I've ever seen on hammer welding. You made me understand exactly when you put that dolly under the roof and I saw it come up and then you hammered the weld. Thanks for the lesson. Great video. It's a shame you're not actually building that but I can't wait to see it chopped up and used to build the chicken truck. Thanks for being you!!!

[@CarterAutoRestyling]

I'm glad to hear the hammer welding part was helpful. Thanks for watching!

[@That70sChannel]

This is Kyle we're talkin' about. At some point after he gets the fenders off the Pontiac, he's going to decide that he needs to find some rusty Pontiac fenders, repair them, and put them on the Pontiac. Have you ever seen him throw anything away?

[@Timrsnakess]

Nice little afternoon project

[@davidcoudriet8439]

"Vile Kyle". I visualize a T-shirt... A four door chop. Fabulous.

[@72NewportGuy]

Dude, You are Talented!

[@tomsawyer247]

Great job Kyle you made it look so easy.

[@JestersGarage]

Oh man. I dig this car now. I hated it before.... now ya gotta do it justice and finish it up!

[@southsideronnie]

Excellent Kyle! I really enjoyed this video!!!

[@CarterAutoRestyling]

Glad you enjoyed it!

[@joewolf4483]

Boy Kyle ... if thats you just messin around I'd love to see you get serious ... guess you will show us on the ole "chickin truck" ... that hour went by in a hurry ... now that's entertainment ...

[@micko5212]

Kyle, My God you turned a bomber destined to be crushed and made into soup cans, into something that has the potential to make a new owner proud as can be, turning heads as they cruise the streets. Your forsight and hand skills make that chop look so easy. It would be exciting to see somebody in "Sus Cats uan" commission you to do an entire project.

[@christianheidt5733]

You have got to put it on the road, it's so wicked!!! I love 4 doors personally, & this one is so gangster now 🤩!!! How unique is this, I would be so proud to own her 😊.

[@ChrisSherlock]

Nicely done Kyle.

[@johnkranyics281]

Look out bad Chad! There is competition in Saskatchewan. Well done Kyle, a great chop and a fantastic Bad Chad impression. 👍👍🇨🇦

[@59redwing]

Kyle does an awesome Bad Chad but I don't think Chad has it in him to do a good Kyle! Your the best! Made my evening!

[@markmcintosh3255]

Brother you had me rolling on the floor!! Had to rewind several times..totally hilarious 😂 😃

[@CarterAutoRestyling]

I'm glad it made you laugh!

[@user-di6rx2wr3r]

As long as you know what you’re doing, (or are creating the illusion that you know, Lol), to that fine example of rolling rust….I’ll keep watching. Back years ago we used to cut cars up with a torch but we never thought about putting them back together, we were only take apart mechanics. You’re a put together mechanic too, I salute you.

[@THEBULK1023]

I appreciate you explaining as you go it's much easier for me to understand

[@CarterAutoRestyling]

I'm glad to hear the explanations are helpful!

[@stuartstephens]

You made what is a pretty complex project look easy. Nice job!

[@glennp6759]

I like how your "this is not the right way" always gives a great result. The chop turned out nice and took out the mordor look. The rear glass angle greatly improves the lines so this fordor as good as a coupe. Even though it is not going to be a finished car it was a good exercise and a nice one to share.

[@CarterAutoRestyling]

Thank you!

[@texanwd8387]

Who would have thought, now that’s a cool 4 door . Man I like to see you built it out

[@davidgray5180]

Building it out not the Chad way,

[@LERaven77]

Kyle, it looks great, and your videos keep getting better and better!

[@CarterAutoRestyling]

Thank you!

[@1942xa]

You've won this huge award for best chop of the year and you mercifully allowed the 4 door die with dignity!

[@CarterAutoRestyling]

Thanks very much, I appreciate that!

[@65bugnut]

Well, I was glad to see that Allen, and Poe have reached a peaceful settlement with the chair. I've always liked that body style of Chevrolet/Pontiac. Ian Roussel from Full Custom Garage did a chop on a 1955 Olds, and turned the 4 door into a 2 door. Your chop turned out as good as his did.

[@kenpecora7526]

Fantastic outcome. You are quite the metal mover in addition to being a fashion trend setter..

[@wyattoneable]

My favorite videos are watching someone with passion. Then add your talent for metal shaping and I'm hooked!

[@RobertPerrigoOkiechopper]

I'm so glad you decided on this project, my wishes do come true, I was a Pontiac tech at aa dealership for 15 years.

[@CarterAutoRestyling]

Hi Robert! I wouldn't reccomend getting too attached to this car

[@henrygraf7860]

Kyle you do good work.

[@alunhuang-wright3030]

A true master at work.

[@drivewayshop]

You talk like you moved to Nova Scotia...😂 Love the attempt at working filler like it's lead.

[@JazzStrat781]

Awesome job as always Kyle 👍 best to you and your cats!!

[@CarterAutoRestyling]

Thanks!

[@roog49]

Really like your free-hand technique.

[@timh301]

You may joke, but you have some seriously amazing skills!

[@CarterAutoRestyling]

Thanks!

[@JohnLittle-ze7sp]

For someone working alone on this car i think you are doing a fine job

[@JimsIfitaintbrokefixit]

Great example of chopping a top. You make it look easier than a person would think.

[@terje6810]

Amazing work Kyle. the nicest 53 model 4 door I have seen, amazing to see you master it !!

[@domecrack]

I like it with the tires that are on it. Gives it an early autocross kind of vibe

[@CarterAutoRestyling]

To each their own!

[@djbruno48]

Great chop enjoy watching Thank you for sharing.

[@garryness7213]

What a great job. Simply amazing how it turned out.

[@CarterAutoRestyling]

Thank you!

[@Mikefngarage]

DAMN Kyle you make Bad Chad Look like an idiot. I thought he was fast at chopping a top. but you do it faster and better IMO.

[@CarterAutoRestyling]

Haha thanks!

[@johnwarren9306]

This is fun to watch you go guy.

[@kingtut5923]

Wow as I keep watching your like Mozart. I have been doing bodywork for 35 years and never done a chop.

[@miguelsalo48]

Love the Bad Chad bit. At least you finished what you started. Always enjoy your work... 🤙🤠👍

[@otisgullickson6429]

Very nice surprise today, loved it. Looks awesome

[@geraldboris1531]

Kyle dude… I am amazed, completely amazed!

[@3gcraftsman]

Dude, you were in the zone!!! Nice work.

[@eddiedebeer1709]

Kyle job well done it's really looking cool. Lots of patience. 🇿🇦

[@user-vq4gk4hx8p]

Nice it looks great, more cats please.

[@paulketchupwitheverything767]

What a transformation. From a sit-up-straight, four door saloon to a sleek shape that flows and conveys motion. Looks really good.

[@garyrobison1518]

I enjoyed watching you chop this top. You make it look easy. Great job, looks great.

[@jamesblake365]

Looks like a great job to me

[@lemontier]

This really turned out well, it looks great. Thank you.

[@paulbellanger2772]

I didn't have much hope for a good ending to this video but it turned out fantastic. Glad you used the old method of pie cutting. I've seen hundreds of top chop articles with photo's but never a video. You are a master at filling those gaps. That was a great video, have watched it several times.

[@joecooper1396]

Amazing talent

[@kielbasi]

Yeah man you're 100% correct about these guys The originals they didn't have anything to refer to they had to just figure it out

[@viscountgrape4473]

Looks good.

[@user-sy4pc6wr8h]

it goes to show that with some thinking you can do it and make it look nice....just make it pleasing to the eye

[@leonardszymanski5341]

hilarious introductions

[@squablow]

Thumbs up for the Rik Hoving reference, well done Vile Kyle!

[@nerradnosnhoj5122]

Very Cool !!!!!!!!! Nice looking treasure ..... visor would be epic !!!! Thank you for the video , Both You and Scott put out some of the best content, It is about having fun Cheers !

[@christianheidt5733]

Yes! A visor would be awesome!

[@gymshoe8862]

@@christianheidt5733 I bet Lyle could whip up a visor out of old wrinkled fenders he has lying around

[@christianheidt5733]

@@gymshoe8862 so true! Unfortunately he's going to use the frame for chicken truck tho 😔.

[@juanzayas7719]

Wao came out alllloooottt better then I expected.

[@skylinegtr-gd2lg]

Just like magic bro - - - looks sooooo cool!

[@larry9441]

Great job trolling the armchair pros Kyle. Love it.

[@CarterAutoRestyling]

Haha thank you!

[@brianbridgeman6877]

21:30 is all I needed to see to know I would never be able to get this job done. Thanks Vile Kyle.

[@snoopu2601]

As long as the finish work looks good after it's covered with bondo and paint no one will know. I'm digging the 4 door chop better than the 2 door chop looks different from having seen many 2 door chop customs

[@vernonabernethy3970]

You are the best!

[@MikeyMack303]

I like that you make it look so easy, and I know that it is not! Thank you for showing us, Kyle!

[@williamevans4955]

Man Looks great.

[@russdavis1960]

Glad you had fun on this project!! It turned out pretty dang good for simply 'going for it' and using your brain and talent. Thanks for sharing Kyle!

[@CarterAutoRestyling]

Thanks Russ!

[@davezacharias8756]

Well Kyle, I really enjoyed how easy you made this look to do....... I am impressed! You should finish it fore sure..... NOT bad for a no tape job!!!!! As you know, chopping 4 Door is REALLY much more difficult versus a 2 door. GOOD JOB!

[@Mercmad]

I had one of those back in the 1970's. And I can imagine the effort required to do all those doors etc. One thing I did have for many years until it was stolen,was a Fisher body manual for all the 1949-54 GM bodies. A very useful book full of pics for those who can't read.