Carved the USMC emblem using the

[@ronnorris1504]

Great little project! i'm starting to use MDF more in my carving project. Seems to work really well as long as you seal it and a newer bit does help. As always, thanks again.

[@encarwoodworking]

Thanks Ron! I like mdf too much.

[@deplorable_2024]

MDF has glue in it which can be harder on blades and cutters.

[@encarwoodworking]

@deplorable_2024 Very true and thanks for reminding me to buy new bits.

[@taylorkatt8723]

Very sharp, Marine. Well done!

[@encarwoodworking]

Ooorah! Thank you!

[@achdee55]

Beautiful, nice work. Just got my Onefinity and just subscribed to your channel.

[@encarwoodworking]

Thank you for watching and subscribing! You will really enjoy the CnC and make wonderful things.

[@MattMadeIt123]

Project looks fantastic. Semper Fi!

[@encarwoodworking]

Orraah!

[@joepie221]

Nice work.

[@encarwoodworking]

Thanks for the kind words!

[@brandoncollins5694]

Looks great!

[@encarwoodworking]

Thank you Brandon! I appreciate your kind words!

[@UserZO5672]

Awesome work!!!

[@encarwoodworking]

Thank you so much 😀

[@kevinrich4637]

Nice job. Just got my Woodworker Elite. New subscriber.

[@encarwoodworking]

Thanks for watching and subscribing Kevin! You will enjoy your elite. I think eventually I’ll do the upgrade to elite.

[@lawcribb6954]

Great job looks great i have been carving a lot of cherry with my CNC I will have to try MDF again its been a while

[@encarwoodworking]

I like MDF a lot since it is inexpensive, but it is hard on the bits. I appreciate you watching and the kind words!

[@RayWest-su5xn]

I am an old Marine and I have an Avid CNC. Would it be possible to get a copy of the G-code you generated? Thanks in advance for your help. Good video.

[@encarwoodworking]

Ooorah! I tend to clear my thumb drive of the G codes but I’ll try to find if I have it.

[@RayWest-su5xn]

Thanks sir!

[@WabiSabiCustomsLLC]

Any luck for a Salty Dog?@@encarwoodworking

[@iwannaapple7190]

@@encarwoodworking Just in case you ever want to do it because you deleted your files of your thumb drive, you might want to know that you really didn't and they can be retrieved. You can think of it as putting your foot in the mud. Your foot may not be there anymore but your foot print still is. It easy to google the code...or it used to be anyway.

[@encarwoodworking]

@iwannaapple7190 that’s good to know. I’ll try to hunt it down that way

[@jimanderson9483]

I love this. I would love to make something like this for Army Military Police. Any idea where I could find a file for this?

[@encarwoodworking]

If I remember correctly it was either in the file section of a FB group or Etsy. Thanks for your kind words and for watching!

[@rogercharlie]

Lovely result. You are putting your machine to good use. Did you creat the vector yourself?

[@encarwoodworking]

Thank you! I did not create the vector. I honestly don’t remember where I got it. It might have been from thingiverse or the numerous FB groups I follow.

[@LarryWSkeen]

Where can I get a copy of this design layout?

[@encarwoodworking]

I bought this file on Etsy but im sure this can be found on numerous FB groups as well. But the ones I found on FB tends cleaning up in node editing.

[@rrosbr]

Hello, I’m a Marine and just got my CnC. Where can I find the VCarve/gsender file for the USMC EGA?

[@encarwoodworking]

Hey brother! I can’t remember if I bought the files off Etsy as a package deal or off the FB groups. But I’m sure if you check out the FB groups under their file section someone posted a file.

[@rrosbr]

Excellent! Thank you Brother! And keep up the outstanding work!!

[@unclebob8746]

What exactly is the blue film you used? Semper Fi. RVN 30MF11

[@encarwoodworking]

So sorry for the late reply. It is oramask. I got it from Amazon!

[@totoffe6234]

Je débute en cnc et quand je vois réalisé ce projet magnifique et surtout en mdf et votre papier collant (je sais pas ce que c'est comme papier) je me dit vivement que sa arrive chapeau M l'artiste.

[@encarwoodworking]

Bienvenue dans le monde de la CNC. Je sais que vous apprendrez et réaliserez de grands projets. Merci d'avoir regardé !

[@totoffe6234]

@@encarwoodworking Excusez moi j'ai une petite question c'est quoi le produit ???? que vous mettez à 0:23 de la vidéo Merci d'avance pour votre retour.

[@encarwoodworking]

C'est oramask 831 (a.co/d/amj4gtr).

[@totoffe6234]

@@encarwoodworking Merci mais page introuvable

[@encarwoodworking]

Désolé, le lien ne sera pas publié pour une raison quelconque. Il vous suffit de rechercher oramask 831 dans votre navigateur ou sur Amazon.com

[@cuervose]

Awesome

[@encarwoodworking]

Thank you for watching and the kind words!

[@EricVadala]

I’m new to CNC and learning. Did you do a rough cut first then a detail pass? Also what was your bit choose on this project.

[@encarwoodworking]

So for this piece I did not do a rough pass. I used a 60 degree vbit for the entire piece then a 1/4 downcut end mill for the profile pass. Welcome to the world of CNC and the rabbit hole!

[@EricVadala]

@@encarwoodworking pretty simple. I always like to ask to keep a mental note.

[@spiveyt]

Why put shellac on it before cutting?

[@encarwoodworking]

It helps the oramask to stay in place when I begin carving. Thanks for watching!

[@elmeradams8781]

What does the oramask do? Could you sand the top instead?

[@user-wx5ev6nz2o]

What bits did you use to make this? I have a friend who is a Marine so you definitely got my attention with this

[@encarwoodworking]

I appreciate you watching the video!! The bits used were a 60 degree vbit for all the lettering and graphics then a 1/4 down cut end mill for profile cut

[@markgreen2770]

Where can I find the file?

[@encarwoodworking]

To be honest with you Mark but I don’t remember 😭. But if I had to guess it would be from one of the numerous FB groups associated with CNC/Stl files etc. sorry I couldn’t be more helpful

[@yepitsodex]

someone buy this man an exacto knife

[@encarwoodworking]

Hahah I should use one.

[@petebernard218]

👍

[@encarwoodworking]

Thanks Pete!

[@unclebob8746]

Should be 03mf11

[@mikel4510]

USMC emblem is called the EGA (Eagle, Globe, & Anchor), and is trademark protected.

[@encarwoodworking]

Thanks for your concern. Recreating is fine just as long as I do not sell or redistribute.

[@robertsmith3518]

What is the plan ? Are we Supposed to read your mindset ? Somebody else can have my seat ,I like the talking videos . . Sorry dude but your channel 1 star at best

[@encarwoodworking]

Thanks for watching anyways!

[@ronhansen7717]

Those that can, do. Those that can't, complain.

[@raydeese4439]

It's not a carving project if the machine does the carving it's a cheap Chinese type of product. That's all it is.

[@encarwoodworking]

I appreciate you watching and opinion either way!

[@rickenterkin4720]

Bro, why you so mad. You mad cuz you don't have the tools to do it? The machine to do it? The know how to make the machine carve it out? You mad cuz his hustle is better than your hustle? Poor guy.

[@encarwoodworking]

@rickenterkin4720 I appreciate you my friend.

[@rickenterkin4720]

@@encarwoodworking I want 1 of these so bad. So much potential. Keep up the great work ole son. Enjoy the videos. GOD BLESS.

[@encarwoodworking]

@rickenterkin4720 thank you! 😊