CarX Drift Racing Online Wheel Settings! SMOOTHEST Thrustmaster TMX / T150 Settings + Tuning Tips!

IM BACK ON CARX and obviously I had to share with the community how I get my TMX SO SMOOTH.
Enjoy!
--------------------------
G-Works x DISL Pack: driftindy.com/...
ALL NRG Innovations Products:
www.theprismal...
drivenrg.com
GLYTCH:
Use code “KOUKI10” for 10% off your ENTIRE ORDER!
Setup:
ASUS RoG Prebuilt
Ryzen 7
GeForce 3060
16GB RAM
256GB SSD
1TB HDD
Samsung 24” 60Hz Curve Monitor
Corsair RGB Mouse and Keyboard
Rig:
TMX Pro with NRG Sim Wheel
KSS Aftermarket Wheel Adapter
T3PA Pedals with:
Ricmotech Springs
TK Customs external spring/damper mods
14-bit USB Hydro
Unbranded USB H-Pattern Shifter
NRG Innovations Short Weighted Shift Knob (SK-450B)
Custom center console
CarX Wheel Settings:
Rotation - 1080
Calibration - 1000-1000
FFB - 1.0
Linearity - 0.0
Links:
NRG Innovations Sim Wheel - www.theprismal...
Hydro - www.ebay.com/i...
Shifter - www.ebay.com/i...
NRG Shift Knob - drivenrg.com/p...
Adapter - www.ebay.com/i...
Spring Dampers (Gas and Clutch): tkcustoms.eu/T...
Load Cell Simulator: tkcustoms.eu/R...

[@Ayokyora]

My thrustmaster t150 just jitters and i tried these settings, i also turned it down but it just shakes, its 2 days okd

[@JudeEthan-ql2iv]

Its not the wheels fault. Its the tune or ffb settings

[@Ayokyora]

@@JudeEthan-ql2iv do i turn it down. it litrally just wiggle and jiggles

[@dwayne357]

really found the video helpful thank you. how would you set the rotation in the game and software on a T300?

[@Kouki413]

I always recommend 1080. 1080 is the most accurate rotation to real life in terms of a majority of drift cars and street cars.

[@davidthibault6652]

Would this be good for a Logitech G29 as well? I’ve been on a wheel for about 5 days now and the only car I can seem to handle well is the Altezza. I’m 900 no assist. I’ve basically tried to tune all the other cars similar to Altezza, but to no avail. I still oversteer on transitions with other cars, which doesn’t make sense to me as the HP and Torque are almost identical as the Altezza. I feel like I’m giving it same amount of throttle, I don’t know 🤷🏻‍♂️ just tired of only being able to drift the Altezza. I’ll have to try these settings, thank you for the video and sorry for the long post 😅

[@Kouki413]

It should work equally well being a gear driven wheel also! The Altezza is naturally such a good car, I love mine too lol I will say this setup guide and tuning tips won’t make you or the car better, this is souly to smooth out the FFB as much as possible and low tier wheels. I would take a gander at my older videos that are detailed tuning guides where I really dive into ideal car setup and numbers, and explain what everything does and how it affects the car. Remember each car is actually different, has different physics, etc, so no two cars will be tuned the same. The most crucial thing with CarX is proper tuning, and practice practice practice. When you mess up, focus on what you did that caused it, and try that exact same scenario again. Study your mistakes, and was real life videos. Don’t hesitate to reach out to me! I’m happy to help. You can find me in my Facebook group “CarX Wheel Community” and on discord. My name is Kouki everywhere except Facebook

[@bunado]

My t150 is just not smooth i dont get it, ot just jitters

[@jdmbachmann]

I need help, i just installed carx on my PC (before i played on ps4). And i have a t150 but can just use the buttons but cant steering and the paddels don't work.

[@Kouki413]

Make sure you assign everything correctly in game under the settings. Also make sure you have your firmware and software for your wheel up to date while you’re at it.

[@arachno000]

idk but i have litarary only FFB in the center of the wheel... and then the ffb randomly disappears and selfsteer is not there at all

[@billycarter8123]

Same

[@arachno000]

@@billycarter8123 kzbin.info/www/bejne/f6WXlHuLh9Oeiac&ab_channel=eXoticDrift%26Race try that.. that fixed it for me

[@Kouki413]

I need more details. Console or PC? If PC, regular version or PTR? What wheel is it? Is your firmware up to date? All this stuff matters. If you’re having this issue with these exact settings on the current regular version (not PC PTR), then it’s something on the physical wheel side of things it sounds.

[@arachno000]

@@Kouki413 its an issue from ther Normal CarX build from the Steam Shop. i cant tell if its an problem on Console aswell.. i have Newest Drivers/Firmware etc. on my T300 but that youtube link i posted is a workaround.. apperently CarX applies FFB to all input devices plugged in.. and turning those off helps too fix it

[@TURBOMOOSE]

Tmx psh can't be smooth 😉 lmao..

[@Kouki413]

Big BET lol

[@Rxkes]

I got it and its trash

[@SquirrelDrifts]

Its pretty good on lfs

[@Th1rstMutilator]

been trying to get my settings for this horrid wheel and its just not goin well, keeps me away from everything except for dirt rally and f1 so frustrating

[@Kouki413]

It can be unnerving getting CarX to feel good, especially compared to other games. Just follow these settings and my tuning advice, and you should be able to get a long decent. You can see in my in-car/live cam video that it is possible, just don’t expect it to be modded Assetto or anything

[@Oopsie26]

Any idea why my wheel doesn’t spin smooth? It kinda like stutters or jitters or jerks like it’s the force feedback or something when I’m tryna spin the wheel in rotations. Any idea how I can fix this

[@Kouki413]

Most likely either in tuning (high caster, etc) or in the new wheel settings. Remember this is with the old wheel settings UI, there’s tons of new settings now. I’m working on a new video, but RL is keeping me very busy

[@silentprodvx]

Do u reccomend TMX FFB and G29 for drift?

[@Kouki413]

Would recommend TMX over G29 definitely

[@tylersharp3165]

Any tips because i can’t control my car as the sensitivity feels so high, Andy tips as to how I can solve this. I’m on a Thrustmaster t80 488 gtb

[@Kouki413]

Not much you can fix with a T80. You have zero Force Feedback since you don’t have a legitimate servo motor, you just have a bungee system. Non-FFB wheels are practically glorified controllers sadly (not trying to sound rude). I would advise in returning that wheel for at least a T150/TMX, or saving getting one, and get the setup with the T3PA pedal (three pedals), and you will desperately need a clutch for drifting

[@tylersharp3165]

@@Kouki413 ok thanks

[@GLaDOSthelegend]

What are ur settings in the thrustmaster Software?

[@sliding_kiwi_843]

My wheel just vibrates and glitches playing this game I'm on a tsxw I uninstalled its unplayable

[@Kouki413]

It takes tweaking, as well as understanding the tuning. The caster, camber, tire compound and tire pressure directly affect the FFB feel and strength. Being on a TSXW, you would need to turn the FFB strength down in the settings, then make sure you set to 900/1080 (whichever you prefer) and calibrate your wheel. Then adjust those tuning options to a realistic setting and you should have a very good baseline to adjust from. I do understand there is a new PTR and the tire model and physics have been heavily updated. I will be delving into that soon hopefully. I’ve been very irl busy for a few months.

[@sliding_kiwi_843]

@@Kouki413 thanks for the reply bro. I'm used to assetto corsa it runs smooth as on that game. IL play around with car x I've downloaded the new ptr beta and I'm still having the same issue. My wheel almost glitches out in drift like it osilates and vibrates etc maybe it's tune il try it out most things you've mentioned I have done except tuning I didn't see a point in playing if my wheel wasn't working properly. It's the only game it'd had trouble with

[@Kouki413]

I definitely hear that. I still stay on AC a majority of the time, and I’ll jump on CarX when I’m bored, or if I have people jamming on there. Join the CarX Wheel Community on Facebook and post up there, we’ll see if there’s someone in there that can aid

[@sliding_kiwi_843]

@@Kouki413 thanks heaps bro!!

[@notXIDOK]

Bro... ur awesome thank u!!

[@Kouki413]

You’re very welcome! If you have any other questions ever , ask away!

[@iifeda_9362]

so in the software 900 degrees and in game 1080 or i understand wrong

[@Kouki413]

Correct. If you’re on TMX, set to 900 in the software, then use 1080 in CarX, and calibrate it to 1000-1000. This increases the steering ratio and makes the feedback smoother and inputs more accurate. If on a T150, set the rotation in the software to 1080 instead of 900 1080 is the most accurate degree of rotation to real life

[@luukdendekker159]

Hey man, I just got carx and ive a problem with connecting my fanatec csl dd to it…. For some reason it won’t calibrate (it doesn’t even show up) and the buttons and axis don’t work. Is there any I can do to fix it? I’m on a pc

[@Kouki413]

Hey! So I’m not super versed on Fanatec issues, but I have a good buddy who is. Join the CarX Wheel Community on Facebook, or reach out to The Doc Drift on KZbin, and he can help ya out!

[@luukdendekker159]

@@Kouki413 Ty for the tip, just asked him in his comments

[@luukdendekker159]

@@Kouki413 hey man, so my comments are glitched in his videos so I cant communicate anymore with him… do you know his discord so I can message him again? (He asked me for it but cant respond)

[@Jakebuch7673]

how do i connect the wheel it doesnt show it

[@Kouki413]

Plug the wheel in via USB and outlet power supply, and will automatically detect. On PC you’ll have to go through a setup wizard and download firmware/software and make sure everything is up to date

[@SimRealLife]

Glad you’re back bro!!!!!!!!! Hell yes!!!!!!!!

[@Kouki413]

Glad to be back!

[@official_sil80]

How did u get the is250?

[@Kouki413]

Steam workshop

[@rikgozer1369]

I spin put allot hou can I fix that?

[@Kouki413]

Keep practicing. Make sure your tunes are good. I have tuning guide for CarX as well.

[@Kubollo]

what settings in thustmaster app

[@Kouki413]

See my Assetto Corsa settings video. It’ll be in there. I left it out if this accidentally for PC people.