build your own bullet feeder | 3d printed ammo mikes / karl bibbs

[@TargetTime]

DAA i believe removed the files. So Here is the goods ;) In this folder will be a 9mm specific unit. And an entire source instructions and all. drive.google.com/folderview?id=1J8AuLfiSqs0zNWjD3qLtCs9nb3iC00_F

[@bobkarstien1248]

Thank you! Just got my 3D printer so I have a little learning first.

[@c.j.1089]

You're a hero for posting the files. I actually downloaded them and it was still on thingiverse and printed the whole bullet feeder, but I never ordered the motor. I actually ended up buying the exact same motor you have, which I thought was kind of funny since you have exactly the same amount and exactly the same orientation I ended up with. I'm glad you posted this, because I had absolutely no additional parts to finish it. I came to watch your video to understand what else I needed to order. Now that I have my bullet feeder functional itself, it seems all I need to do is get the DAA die, and the spring. Did you also use a coupler at the top against your bullet feeder?

[@TargetTime]

@@c.j.1089 the collar on the daa output spring is the right size to fit. Other end of spring fits snuggly into the part that goes on the die

[@justinwolden399]

Is there a specific main housing I should be printing? Looks like there a few different bowls. I just printed the first one I found in the folder. Are they specific to certain motors? Also what's needed other than the spring? Is everything else printed?

[@TargetTime]

@@justinwolden399 the bowl is specific for the motor. Ex. 370 worm gear, daa, etc You will need a spring , and a bullet feeding die. I suggest the daa. Its expensive ($50) but works amazing and has ball detents, also I suggest a expander insert specifically for bullet feeders (if using a dillon powder hopper and die) if using leefound it to work just fine for pistol

[@leadpilled5567]

The lee bullet feeder dies work great. Not sure with an auto bullet feeder but with the tubes similar to the mini mr bullet feeder set up. I just ordered the silver layer bullet and brass feeder. We’ll see how well they work but the pics and videos I could find the fit and finish look really good. $400 for the set with disks for 9 40 45 223 included. Veteran owned company that’s making them which is always a plus in my book

[@peterlandin457]

I made a "dual sensor" on a friends 3d printed bullet feeder. I ran two optical sensors, one at the low side of the tube and one at the top where the bullets drop down. There is like a threshold, When the tube is empty, it will fill up to the top, and stay off until the lowest part (6 bullets left in the tube) runs out, only than will the motor starts, and stops again when the tube is full. Than you wont need to hear that motor and bullets ratteling every time pulling the handle =) Everything is possible with a arduino =)

[@beantown_billy2405]

The powder funnel not only flares the mouth but also sets the inner diameter of the case for consistent bullet tension.

[@rexjustis4287]

Thank you for a great video and the links.

[@FerrousWrangler]

Very nice video man! Also...nice primer tube holder. I believe that is the one I made and put on Thingiverse. No frills but it works nicely. I've got this thing printing now. Looking forward to testing it out. Great info.

[@TargetTime]

Thanks. Yep works good

[@purplearrow47]

Thanks for sharing this information, very educational and the links are great.

[@TargetTime]

You're welcome thanks for watching and commenting

[@PatriotPaulUSA]

Really Nice I am talking to dillon right now about which machine to buy. I will definately look you up and Carl Bibbs. New Sub!

[@TargetTime]

Thanks. 3 popular upgrade mods on the 650(and now 750) are posted on my channel. Makes it much smoother running

[@ericfreund5944]

just make the arm on the switch longer if it is too stiff

[@kennethlagoniolsen7890]

You say the switch is a 0.29N opperating force but you link to a Honeywell switch (V15H16-CZ100A03-K) which is 0.96N? (Arrow site states 0.29N but the part number in the datasheet says 0.96N) - So the quistion is what switch to get? perhaps 0.2-0.4N will do? or is your switch in the video 0.29N in which case I need 0.15N? Thank you :-)

[@jimh3588]

Thanks for sharing. New subscription here. Found out Karl is no longer in business so your video and files are a life saver

[@ronin2973]

Nice job. Does the engine need the regolation rpm unit separately or is it possible change the rpm directly to the engine?

[@estebanvializ9985]

Thats a fast motor!

[@TargetTime]

Yeah I have a 6 RPM on my other one. The 10rpm could use a speed controller.. But no issues just fills faster

[@andrewlenhill]

I just bought the load master it's ok but I want something better allready. I'm tossing a few ideas around. Buy a bullet and case feeder from karl. I load 9mm and 223. I have the hornady case activated powder measure which I like and paid 169 for the kit with pistol adapter just a week ago. I have the lee 9mm bullet feeder and the rcbs bullet feeder. The lee works great havnt tried the rcbs yet I got it on sale thinking I could use it in conjunction with a automatic bullet feeder. I think if I get the bullet and case feeders and something g to help with the way my brass feeds I would be satisfied with my load master. Second idea. I have 2200 dollars that I'm seriously considering blowing on a Dillon but havnt done alot of research to make me comfortable buying one idk which one to buy. I want bullet feeder and case feeder. Oh and I'm buying g the dillon case trimmer regardless of lee or dillon. I'm torn I no most people would say buy a dillon but I'm hoping to get this loadmaster pimped out and use the rest of the money for more components. If you have time to give me your opinion on both ideas I'd I'd appritiate it BIG time and if you say dillon, which one? I guess I'm worried about putting a bunch of money into the loadmaster and having to constantly fuck with it. But I dont want to buy a dillon and feel like the loadmaster would have been just fine for me. I make about 2000 rounds a month between the 2 calibers. I use my single stage for my 308, 306, oh and I also load 300 blkout just havnt tried it on the loadmaster but would love to especially with the dillon trimmer.

[@floorpizza8074]

Hey Andrew, I know it's been nine months.... I was a little late to seeing your comment. What did you decide on? I have a Dillon 1050, a Dillon 550, and a Lee Classic Turret Press. For just one or two calibers, the Dillon 1050 can't be beat. But adding more calibers than that is just way too expensive for average guys like us. I do really like the 550. I have added a Lee Bullet Feeder (no collator, just the fingers that place the bullet and a drop tube) to it, and I have an Ammo Mike bullet feeder (like in this video) hooked up to it. It makes the 550 *much* faster to run, but now I'm really wanting to add a case feeder for it. If a guy wanted one press to do it all, I'd suggest either the Dillon 550 or their new 750. Whichever one you get, add a Dillon case feeder to it, and an Ammo Mike bullet feeder. This is a much more inexpensive option than a 1050, and caliber conversion kits for the 550 or 750 are SO much less expensive than the 1050. The really neat thing about a 550 or 750 with case feeder and bullet feeder add-ons is that you can reload *any* of your calibers at full progressive speeds. Before I bought the 550, I just used the 1050 for 9mm and 5.56, then used the Lee Classic Turret press for everything else. The 550 has been a game changer... we can now load *anything* we shoot at full progressive press speeds with the bullet feeder. It'll be even better once we get the case feeder.

[@Truckinman2000]

What do you use to drive the plate? I have downloaded 5 or 6 different variations and none of them work. I have attempted to bend a M3 screw over 90 degrees but it keeps snapping off. Next attemt is to banllend the screw into 90 degrees and reinforce the bend with jb weld.

[@johnjlong]

Question about the flipper. If I pause your video at 5:57 it looks like you're just using the weight of a 9mm bullet to keep the flipper engaged on the collator plate instead of a spring. Is that true or do you also use a spring? Just curious. My only other question is about the mount. I downloaded your .zip file (thank you very much for that) and when I look at your 9mm setup, the mount looks different. The file "bf_v2_mount_hang_WH120" looks closest to what I see in the video, but it looks like it would make the feeder housing hang straight, not tilted back like the one you have. Is there another version that may not be in the zip file or am I just missing something obvious? Sorry for all of the questions, I'm just grateful to be able to make this, so thanks again.

[@TargetTime]

Yes a projectile for weight works when you don't have a spring. Many mounts in the main folder..I am using the case feeder mount. And the 370 worm gear base (this will be specific to your motor)

[@snakeboard1]

Hello, congratulations on the assembly, can you tell me which spring to use?

[@TargetTime]

For the bullet drop? The DAA spring is the best. But you can also use corrugated wire loom at home depot

[@mario3804]

You made this video five years ago and well there’s no more Bibbs reloading group on Facebook, wondering if he still ales bullet feeders.

[@TargetTime]

@@mario3804 I don't believe so. Do you know anyone with a 3d printer?

[@dgarcia7388]

So I need a transfer tube- I think I’ll try the corrugated plastic since that’s easy to find. How did you make sure it stayed attached to the bullet feeder? Does it stay on its own?

[@TargetTime]

Couple dabs of glue. Lets it stay on. And easily sanded/chipped off for going spring later. Zip ties to keep tube together every so many inches

[@markcerajewski5709]

I ordered one... I think it will be awesome

[@TargetTime]

It is awesome. Never would I expect speeds to increase this much. I'm quick with the finger. Bullet feeding. But wow

[@markcerajewski5709]

@@TargetTime just got it and set it up... runs good ...nicenhownquiet it is. Only thing is I had to wrap electrical tape where the spring goes into the die to hold it in place as the spring is to short and more take on top of bulled die to make the switch part stay in place

[@TargetTime]

@@markcerajewski5709 the bullet transfer spring? Does yours have a switch housing on top of your die like mine? The DAA transfer spring is too short if that's what you mean, its meant to stretch it out in the middle for length you need

[@markcerajewski5709]

@@TargetTime ahh ok.... I will do that.... now having trouble with bullets not flipping and jamming feed from the hopper.... been adjusting this flup plat but just dont seem to work well... I get about 50% falling upside down uggg lolol.... prolly just need to find the sweet spot

[@markcerajewski5709]

@@TargetTime I am using 115 grain hollow points from rocky mountain reloading... think that might be the problem ?... nose to light or profile ?

[@pilotoo2007]

Any chance of getting the stl files from you? Have looked all over and no luck

[@phantomsurvivor6169]

Any other substitute for the arrow switch listed?

[@teslajet]

I see the hanging mount is on an angle, but I can't find that .stl anywhere. Where did you get the mount?

[@TargetTime]

Everything is in description. Stay to the folders related to the feeder. Not responsible for banned consoles

[@vincentapuron4870]

What infill did you use for your slicer? also which die adaptor did you use to attach to your Loadmaster?

[@TargetTime]

The die adapter will be specific to you bullet feeding die. I do not use the Lee bullet fingers. That worked for a very short time. Way to much hassle. Daa bullet feeding die is the way to go

[@13letsgoredwings]

Target Time can you tell me were you got the stl for your drop spring holder. I like that one much better than the ammo Mike's version but I can't find it. Thank you for your time.

[@TargetTime]

If its not on my files then that was something from Karl bibb specifically. You can find him on the Facebook link

[@jamesbingham4914]

I am looking to print one myself however I am not sure if these are best printed with pla or petg. What would be best? and if you know, what brand of filament is used? I like that shade of blue for my dillon!

[@TargetTime]

Prusament azure blue or eryone blue is pretty close. Pla with heavy infill on the basket

[@jamesbingham4914]

@@TargetTime Thank you!!

[@phantomsurvivor6169]

Are there any available files for plates for other caliber bullets such as 223, 308, 40 and 45?

[@JeffinTD]

This version can be set to feed nose down?

[@brocksdaddy081910]

Do you think you could 3d print a die to use with thw Dillon powder measure? Not to bell the cases just to actuate the powder measurer.

[@TargetTime]

definitly think it would be possible. they make 3d printed bullet feeder dies now. karl facebook link is in the description. i would join there and send him a message. i bet he has something he could make

[@PastorTimMoore]

I am looking to get a bullet feeder and case feeder for my 750. I am a novice with this stuff. Would you suggest just buy it all from Karl Bibb or buy a 3D printer and do it myself? Is there any real cost saving if you don’t currently own a printer? Are there other benefits to getting the printer for future items with reloading, etc??

[@jimh3588]

Did you buy from Karl or print your own?😊

[@PastorTimMoore]

@@jimh3588 bought from Karl

[@samuelk009]

Do you still have the files? The account was removed from thingiverse

[@brguns]

Awesome details and instructions! Too bad the files cannot be found anywhere.

[@TargetTime]

I got ya covered . Check the new description or my top pinned comment ;) It it ever gets popped I got backups.

[@brguns]

@@TargetTime Thanks man! You are awesome! Just subscribed to your channel!

[@Bacnow]

9:45 Damn bro! That looks like 3D heaven!

[@mervindelmar2897]

what is the minimum 3D printer bed size for this project?

[@eladsinay6914]

does this all work with hornady lock n load as well?

[@TargetTime]

@eladsinay6914 yes. But the mounts and bullet feeding die will be different. Unless you are using the daa die. Check the files in pinned comment and see what's in there. Been long I'm not sure anymore

[@rodrigoarija2009]

hi, Great Video! do you have an idea if this works on dillon 550? thanks!

[@TargetTime]

There are many who use it on the 550 on Facebook

[@bobkarstien1248]

Where can I get the files for this bullet feeder? they are no longer available on thingyverse.

[@SoggyCashew]

You specify lighter Micro Switches, not really caring about the price I'm looking for one at Operating Force (N) 0.2, do you know where I can get at a reasonable price? Thanks,

[@TargetTime]

Aarow is where I get my sensitive ones

[@SoggyCashew]

@@TargetTime what model?

[@TargetTime]

@@SoggyCashew its in the description

[@rodneyrodriguezjr1]

What size screws did you use for the Jgy-370 worm gear ?

[@Renrondog]

3mm

[@Talvionn]

For the power supply, how many amps are needed? Thanks!

[@TargetTime]

All depends on the motor. I believe on this one I talk about it . If not it's the other video. This DC worm gear motor I want to say it was 1amp? The AC was like 5 amp I want to say. But its been a while i would have to check

[@TargetTime]

Also want to say I linked my adapter and motor I use in description

[@dluap75]

Impressive.

[@TargetTime]

it is. thanks for watching.

[@noneya135]

Thanks for sharing. Hoping I'll be able to contact Karl to order one.

[@TargetTime]

Yep just check out his Facebook group. Plans in descriptions if you have your own printer

[@meat_popsicle69]

@@TargetTime Can you Link to his facebook page?

[@TargetTime]

@@meat_popsicle69 facebook.com/groups/609033382832289/?ref=share

[@kennethlagoniolsen7890]

I'm printing the JGY370 version, what do you use to connect the motor to the collector plate? some sort of D shape connector?

[@TargetTime]

Yes of you have a D shaft then you can buy a d shaft adapter or print one. Sorry I did not see this comment

[@TargetTime]

Ask karl bibb maybe he has a print he can share. Or ebay search for a d shaft coupler. That will allow you to clamp this collar on the shaft. Then clamp something round into it. I've seen cut off screw drivers turn then, Some have had a small bar with a hole in it where a roll pin is inserted ( like a T coming out of motor) that T would turn it the plate if a slot was cut for it

[@Jae678]

Does anyone have a complete parts list for this? Motor and arrow switch are in the description, but what else is needed?

[@TargetTime]

The 3d printed parts, the tube spring for bullets to transfer, a bullet feeding die. Screws

[@Jae678]

@@TargetTime so no power supply, speed controller, switches, wiring, etc.?

[@adamtolley5739]

ammo mikes thingiverse link is no longer available are you able to send the stl file so i can print my own

[@TargetTime]

Description and top comment has what you need

[@13letsgoredwings]

I just ordered the new ender 3 v2 and of course the ammo mike files are not on thingiverse anymore.

[@TargetTime]

Check description and top comment. Stay to the bullet feeder files only. Not liable if you go clicking around other files in there.

[@13letsgoredwings]

@@TargetTime I double checked the description brother. His files aren't there any more. I get a 404 nothing awesome is there message.

[@TargetTime]

@@13letsgoredwings top pinned comment, and 2nd paragraph of description both have it.

[@13letsgoredwings]

@@TargetTime understood. Thanks brother

[@malcolmsmitherman4195]

I want one of these. My only issue is that I don't fakebook . My wife however has a fakebook accout and she asked Karl to join and he has never replied. Is there any other way to get in touch with him other than fakebook?

[@TargetTime]

What is the name of the account I will let him know to add it. Sorry I just seen this from 3 days ago. Never notified me.

[@loadblock4995]

Any info on the photo switch? I can’t find the snap switch in your link. Anyone have a switch available?✌️

[@loadblock4995]

Think I found what I need but if anyone has an arrow switch resource I’d rather go simple. Optical Switch (Group B) all parts are available from Amazon (approx. $41.18 total): ThreeBulls 12 Pieces 5.5mmx2.1mm DC Power Jack Female Panel Mount Connector (ASIN: B01N8VV78D) - $6.99 Aoyoho 12pcs Car Truck Rocker Round Toggle LED Switch On-Off Control, Blue, Green, Yellow, Red(12V 20A) (ASIN: B01GLIPEGY) - $6.35 uniquegoods 1803BKW 1.8v 3v 5v 6v 7.2v 12v 2A 30W DC Motor Speed Controller (PWM) Adjustable Driver Switch (ASIN: B00RYKR83Q) - $5.98 DC 12V Car Led Light Control Photoresistor Plus Relay Module Light Detection Sensor (make sure to get one with the photoresistor on a wire lead) ASIN: B01M67V8AQ - $6.99 Daykit 10 Pairs DC Power Pigtail Cable, 12V 5A 2.1mm x 5.5 mm Male & Female Connectors for CCTV Security Camera and Lighting Power Adapter (ASIN: B07PS8T2KM) - $7.99 Rasalas LED Bulbs，1 Pack (30 Bulbs) 5mm 12V DC LED Pre-Wired Round Top Bulb Lamp for DIY Car Boat Toys Parties (White, 5MM) (ASIN: B07QDL21BX) - $6.88

[@toddhanson2819]

What 3d printers are you running?

[@khaggard3797]

Would love to get the details on your 3D printers please?

[@AnthonyGalati]

Any chance you still have the plans since they were pulled down?

[@TargetTime]

Updated link in description. That's my Google drive. I suggest staying out of the Nintendo and PlayStation files unless you know what they are

[@AnthonyGalati]

@@TargetTime Thanks.. However I am not seeing it in the description of the video. I see all your links to amazon and such.

[@TargetTime]

@@AnthonyGalati sorry link is on the pinned comment. (Top one)

[@chgofirefighter]

How can I purchase this bullet feeder ? Does it work with the Dillon 750?

[@TargetTime]

Yes the 750 is the same as the 650 just uses the 550 priming system. Purchase from the Facebook group. link in description

[@superkillr]

I wonder how MBF feels about the people making a business printing these considering they don't like even the files to be available?

[@TargetTime]

They fight everyone. They are attempting to sue now. Awaiting letters of promising to close doors now. This isn't MBF this is ammo mike. I use DAA die because DAA die work good. But ammo mike designed this to use DIY electronics. (Notice my motor) its not DAA it's Worm gear from Amazon. The 3d printing community all helped mike. We have files for 8 different motors now. The "does the same thing" patent breaches they done over the last 10years are BS. And never stuck to anyone with $ and backing to fight. Now they are on this well the hopper style curve looks similar crap. Same thing with slidefire they sued and shut down any type of stock, trigger mechanic, etc. Anything allowing recoil to fire (legally because trigger reset) Was copying them. Even if it wasn't a stock at all

[@TargetTime]

And the real question is how does ammo mike feel everyone is making business of his design. Karl has mikes permission to sell. But i know 6 others that do not But you put the files out for people and there will always be sellers

[@superkillr]

@@TargetTime --Yeah he did an amazing thing knowing full well people would take advantage. It's why I won't upload any files to TV. DAA are cunts and I'm sure the whole 3D print craze blew up in their face having no idea when designing and manufacturing the MBF that people would be able to make the same thing in their garage over night.

[@hash46176]

Is this printable on an ender3

[@TargetTime]

Yes

[@TargetTime]

Check bucket size. But I had a red one printed on an ender 3 and I don't think it needed resized for height. Remember full infill for durability

[@badbilly429]

Cranking them out man

[@TargetTime]

Yeah it's crazy how fast. By hand I was getting about 6 min. This I time 4 sets of 100. Fast each time. From 5min20sec. Down to 4min. 36 sec. Still looking in each case and thats with 3 station 1 jams I cleared. I started a 100rd test at the end of this but of course the gremils came out. A press ALWAYS KNOWS when you time or record it for speed. My station 1 locater or case pusher one needs something idk. It was messing up every 15cases during the speed test. So I called it quits and sweet talked her for a moment lol

[@cristian2733]

in thingiverse, the openbulletfeeder project is gone, can't you send it to me? :(

[@TargetTime]

Check description or top comment

[@ZERO_42069]

Where can I print that oval thing for the screw?

[@TargetTime]

Karl Bibb edited that part from ammo mikes feeder. His FB link is in description. You would needthe matching file to remove the same notch in your plate.

[@AnthonyGalati]

My friend is having an issue with the spring from the bullet feeder to the dropper. It isn't long enough. He is using a Hornady LnL. Do you know for 9mm and 223/556 where we can get longer springs and what those specs are?

[@TargetTime]

Daa sells the springs. But they are short. Its meant to be stretched to how long you need it. Dont over stretch because you can't undo it. So you don't want it floppy and sagging catching up bullets. Little stretches at a time

[@mastermoarman]

Hey dose this work with rifel bullets?

[@TargetTime]

Yep. Its a different feeder plate, flipping plate, and the tube that goes on the die. But change over in about 2 minutes. Or if only rifle no changeover needed

[@mastermoarman]

@@TargetTime how about the feeder on the press side of things?

[@TargetTime]

@@mastermoarman that's your feeder die, you purchase that from daa, Rcbs, hornady etc... In the caliber just like your other dies.

[@TargetTime]

He has 4 right now on sale (random colored) $140 .. Seen the post on his Facebook group. Not bad price if you don't have a printer.

[@mastermoarman]

@@TargetTime thanks I do have a printer . Just try to figure out what feeder system to use

[@ludo27730]

Hi you did a fill of how much%?

[@TargetTime]

100 on most anything holding weight

[@dirtylostsheep]

Does anyone have these files? I just checked thingiverse with no luck.

[@TargetTime]

Description and pinned top comment . Stay to the reloading files. Your risk if not

[@karlbibb2411]

I am no longer selling anything. Just an FYI.

[@josethepimp]

The thingiverse link is showing 404! I actually e-mailed myself the link the other day to download the prints on my print controller printer. Does anyone have the actual .stl files?

[@TargetTime]

www.thingiverse.com/search?q=Bullet+feeder&dwh=215de966ab4216c Ya it's like its been removed. Not sure what's up. I'll look around

[@IPSCMAT]

@@TargetTime let me know if you find it , I've printed 3 of these but didn't grab a the files

[@TargetTime]

Daa probably sued AGAIN. But here is some files I have heres my Google drive. This is for chancs synchronous motor , sadly I lost the worm gear base. This also has a couple mount options to the press or standalone pipe. Also has the tray for 9mm The droptube is 9mm ID ( hit it with a drill to make wider or use software) Few other needed parts drive.google.com/folderview?id=1J8AuLfiSqs0zNWjD3qLtCs9nb3iC00_F (Please DO NOT TOUCH THE NINTENDO SWITCH FILES IF YOU ARE NOT FAMILIAR with staying hidden from nintendo.)

[@TargetTime]

drive.google.com/folderview?id=1J8AuLfiSqs0zNWjD3qLtCs9nb3iC00_F

[@IPSCMAT]

@@TargetTime thanks

[@estebanvializ9985]

Where I can get the transfer tube?

[@TargetTime]

Do you mean the drop tube? If so All files are in Thingyverse just by searching open source bullet feeder. Or if no printer karl bibbs reloading stuff on Facebook

[@TargetTime]

Ah transfer tube. Sorry. The spring is from daa (double alpha they make the Mr.bulletfeeder. I highly suggest using thier feeder dies and spring, and funnel if on pistol) Or you can get by with department store corrugated tubing

[@TargetTime]

1:45

[@justinwolden399]

@@TargetTime I plan on following your advice to use the DAA dropper assembly combined with the ammo mike bullet feeder. Any advice in terms of getting it connected to power,

[@TargetTime]

@@justinwolden399 is this the long video? (I have 2 posted) in the description there should be a link for a power adapter and quick connectors. (Check motor rating. The synchro motors sometimes take 5a + (like laptop supplies) the worm gears take about 1a or less If no link let me know and I'll comment the link of the one I bought. It had the connectors included for easy wire

[@jawsmod]

Are you selling the 3D printed parts?

[@TargetTime]

No. Sellers need permision from the designer (ammo mike). There is a link in description for a FB page. Karl Bibb has permission and makes them. Sells the parts or built units if you don't want to source the motor and electronics

[@jeffreygoodness549]

Hey, can you message me, please? I have a question about the motor, switch and power control!! Thanks!!

[@TargetTime]

That is one thing I never figured out is how to message from mobile KZbin.

[@jeffreygoodness549]

@@TargetTime I hear you. So One question I had is where do you get the piece that threads down onto the motor shaft the T shaped piece that drives the collator plates?

[@TargetTime]

@@jeffreygoodness549 depends on what motor shaft you have. Some are D shaft some are threaded shaft. You just need to find that shaft extension. And it depends on what collector plate you make. Some have ovals like mine. Some are just a slot. ( so you just put a roll pin through your shaft extension) Seen some where a cut off screw driver handle was affixed to a shaft with epoxy weld

[@jeffreygoodness549]

@@TargetTime ok cool thanks.

[@denisfluet9699]

can I buy one made where

[@TargetTime]

Link is in description

[@VeteranDave]

cant find the stol files can u email them?

[@TargetTime]

Description and pinned comment

[@markcerajewski5709]

I would like to buy one.... any chance of that ?

[@TargetTime]

The link is in description

[@markcerajewski5709]

Thank you ... I ordered one in 9mm and 5.56

[@stephenmcmahon695]

@@TargetTime I would like to buy the parts in a blue(Dillon) for a complete Collator. Can I get the info where to order from you or buy the pcs from you? [e-mail]

[@TargetTime]

@@stephenmcmahon695 I do not sell these. You can find a maker in the description Karl bibb

[@cyndihall118]

Where can i buy one

[@TargetTime]

Link in description

[@bradcooper670]

I would like this but do not have a 3d printer and Facebook. Can you help me out?

[@TargetTime]

He only does Facebook . other than me checking price and putting the order in for you. But if you want I can tell him the order, your address, then you can paypal him if you want to do that.

[@bradcooper670]

@@TargetTime I need everything to build the feeder. Can you get a price for everything?

[@TargetTime]

@@bradcooper670 on what what press. What calibers. And what brand bullet feeder die?

[@bradcooper670]

@@TargetTime on a dillon650 9mm and 40. DAA die since I have one.

[@TargetTime]

@@bradcooper670 any specific color hopper? Or just blue. 2 tone? Layered etc. Not sure if you can request plate colors but i can check.

[@moondog573]

@10:40 sounds exactly like willy wonka, where are my remix guys out who can make a great meme video out of that?

[@TargetTime]

😄 huh?

[@woodrowle7842]

Hey is there a way besides Facebook to get in touch with Karl? I opened up a account and request to join the group but no luck.

[@TargetTime]

What's the Facebook account name? I'll have him add it

[@woodrowle7842]

Woodrow le

[@woodrowle7842]

Any luck getting ahold of him?

[@TargetTime]

Sorry it never alerted me you comment back. Just messaged him

[@TargetTime]

He said re apply sorry

[@MBatYT]

The company Douple Alpha has forced the deletion of the Open Bullet Feeder project on Thingiverse.

[@TargetTime]

It's still everywhere ;)

[@MBatYT]

@@TargetTime Yes, but now the exchange between the people suffers and there is no real progress in the project. Only in the shadow.

[@calvin14888]

Just buy the real Mr. Bullet feeder to save you lots of time. Besides, I didn't see any world champion who had not use the real deal.

[@TargetTime]

What time are you saving? This comes built in the same pieces as mbf. And is there some dillon 650 reloading championship i don't know about? Or are you relating how good a shooter or his ammo is to a bullet feeder? Because this unit and mbf has no influence on a complete round or the recipe and literally does nothing but place a bullet for you on the top of a case. You still need dies to put the bullet in the cases

[@floorpizza8074]

And do you think that any of those world champs that use Double Alpha's Mister Bullet Feeder actually *paid* for their Mister Bullet Feeder? If you do, you're very naive. Those pro shooters don't pay a dime for *any* of their reloading equipment, or even the guns that they shoot.