Hey everyone! Being a huge Simpsons fan I thought I’d make a sprinkled donut in honor of Homer (mmmm 🤤 donut). I hope you all enjoy this project and have a great weekend!
@kevinbray37242 жыл бұрын
Maybe make a frothy solid metal mug of beer. "To Beer... The solution to... and cause of... all of life's problems."
@slimpickins09er872 жыл бұрын
This creator needs more subs also AdRock and since it seems it's up to the creators and community to promote independent creators. I'm doing my part. He has casting videos but this is a Koi Pond Fountain. I think you will like it. His Ball Mason Jar Light video has the most intricate mold I have seen and his furnace is a Budweiser Keg. kzbin.info/www/bejne/qImsZmqNhcuiaa8
@scarlettardis20182 жыл бұрын
Huh...Must be in the air I was thinking about a duff sign the other day.
@SJWCASTING2 жыл бұрын
Doh! Now I want donuts! Thanks a lot 😏. It does looks nice! Well done!
@jacobhouser29322 жыл бұрын
Impressive, very well done and truly enjoyed it.
@stevenleppo79962 жыл бұрын
I love the fact you use ingots, they are ALWAYS a means to an end...I use my ingots to create insets, before I can create the inset it has to come from from bullion bars. They are art in themselves, but it takes an artist to create something out of them.
@dancook90682 жыл бұрын
Jelly filled is my favorite but your sprinkle doughnut looks cool!!
@MarshalNey1082 жыл бұрын
Mmmmmm.... Forbidden metal donut.
@lucal61662 жыл бұрын
very cool cast!
@vaughndumas2 жыл бұрын
Damn, that looks good.
@ArmySoldier19722 жыл бұрын
Love the new channel. Love the donut as is. Great cast. Love the themed casts, so much fun to watch. I think it would look great with the icing and sprinkles painted But I would not have the patience or steady hand to do so. New flask looks awesome. Army SE Oregon
@RicardoGarcia-1042 жыл бұрын
That box is a beast.
@peterbarker75382 жыл бұрын
Nice setup with the steel flask. I hope you will be going up in your numbers for ever. Thank you for all your previous work, I have learned from you all so much.
@rharbarenko2 жыл бұрын
Mmmmmm Forbidden Donut........
@whocares66982 жыл бұрын
You should do an ice cream cone next, please and thank you. Thanks for the video
@gavnott45632 жыл бұрын
Yay back to your old schedule for uploads
@MrMelter2 жыл бұрын
I’m working on it the best I can 👍🏻
@shadowo70166 ай бұрын
Great job!
@StingerBeeCo2 жыл бұрын
Hahaha that turned out pretty cool
@RogueSmithersCouple2 жыл бұрын
when Homer Simpson's dentist owes money to the mob THIS is what he resorts to.
@georgiosrinakakis9342 жыл бұрын
Nice cast! It would be quite interesting to make the donut with aluminium, the topping with copper and the sprinkles with brass/Nordic gold!
@stovetop99512 жыл бұрын
Awesome video as always. Is that the aluminum from the boat? Love the new channel so far. Hopefully the change helps you viewership.
@MrMelter2 жыл бұрын
Yes that is the aluminum from the boat 👍🏻
@awldune2 жыл бұрын
Steel flask!! I've never seen one. I wonder if it would warp if you have a bad spill. OMG, that picture of Tarantino 😄
@June28July2 жыл бұрын
Mmmmm, donut
@MrMelter2 жыл бұрын
My thoughts exactly 🤤
@davidchelson80692 жыл бұрын
Is it ready for pink icing and rainbow sprinkles??
@jeffharmon79272 жыл бұрын
Mmmm donut lol
@davidhinshaw52422 жыл бұрын
Awesome as usual. Envy the steel casting flask. Is that new? Thanks again for all your hard work
@MrMelter2 жыл бұрын
Yes I just had it made not long ago 👍🏻
@davidhinshaw52422 жыл бұрын
@@MrMelter that would make for a interesting video. How too helps us guys just starting out
@LooseChange73252 жыл бұрын
I love your casting videos, but wanted to give you heads up. YT did not show this in my feed and I'm subscribed! I saw the post on Instagram and came looking for this one! Super cool as always! I am a bit curious, your donut looks like you might have lacquered the filament? Did you sand and coat to make the mold more smooth? Or maybe just added gloss so the donut looks better on camera?
@ChatterontheWire2 жыл бұрын
so close to 1k, since it is a week later now and I'm getting back maybe you've finally got over the hump!
@nattsojaqs9822 Жыл бұрын
Paint the glaze pink! And color the sprinkles
@RicardoGarcia-1042 жыл бұрын
I jus found this channel as u mentioned I was unsubscribed as well to the adrock channel. But did have a quick question about the printer you use for the labels or shape that you etch with the solution and battery What printer is that. Or maybe a descent one to use for that. I would like to start doing that to my casting. Thank you again for the awesome videos. Found your channel when I was having a issue with my bmw and you had a fix
@waynerichards34902 жыл бұрын
The donut looks great I am curious what made you change to a metal flask over a wooden one as you have made some gorgeous pieces of work from your old one
@MrMelter2 жыл бұрын
The metal one doesn’t catch on fire 😉
@henrypeterson36252 жыл бұрын
We're the ☕️
@Russ34032 жыл бұрын
Mmmmm 🍩
@carolavw2 жыл бұрын
I thought you would paint the frosting...
@justin_ray2 жыл бұрын
Careful, you'll chip a tooth on it 😉
@crazycudaman4402 жыл бұрын
Mmmmmmmm donut …. Homer j Simpson
@paulpaulsen4162 жыл бұрын
Is this just another copy of *bigstackD Casting* and his Melting-Videos? 🤔
@awldune2 жыл бұрын
He and bigstack are friends and started up around the same time.
@imafreeamerican74432 жыл бұрын
Look at his other videos, more about casting various objects than primarily ingots. I watch both of these guys and have learned so much about technique.
@paulpaulsen4162 жыл бұрын
@@awldune Thank you! I did not kno that 👍
@paulpaulsen4162 жыл бұрын
@@imafreeamerican7443 Thank you!
@awldune2 жыл бұрын
@@paulpaulsen416 Also if you didn't know, this is a new alt channel for ArtbyAdrock
@scarlettardis20182 жыл бұрын
Nice job
@scarlettardis20182 жыл бұрын
Use some aluminium dressing wax. Stops stuff clogging up during dressing. Also leaves a better finish for the polish.