Kevin demonstrates the method and reasoning of our AFO casting technique. We recommend that our CFAB customers use this casting technique for best results. -Kevin Matthews, CO/LO
Пікірлер: 48
@emmapariera52106 ай бұрын
The ending was perfect 😂
@nicolebuesgens36387 жыл бұрын
You sound like the podiatrist I work for- it's all about the German steel! :) Great video on casting. Thank you!
@americanpaisareturns90513 жыл бұрын
Very informative. Thank you.
@kevinmatthews6833 жыл бұрын
Glad you got something out of it
@treybegood8 жыл бұрын
Great video! Please...keep more coming! Would love to see a video on thermoplastic KAFO modification. Alignment gets so tricky with them.
@thornwarbler10 жыл бұрын
I wished you worked where i work and we got casts as good as yours its a pleasure to watch someone doing the job right................Thanks
@kevinmatthews68310 жыл бұрын
You could always ask your practitioners to watch.
@marioperez-jk8dm18 күн бұрын
con venda enyesada el resultado es mejor si la sabes trabajar , demasiadas vu eltas y materia para algo tan simple
@sthwestb7 жыл бұрын
Just wanted to say this was one of the best video's I've seen on casting/fabricating. I'll also say you have one heck of a good looking son as well with AWESOME looking feet!! I'll be looking for more recent video's seeing this one's 4+ years old almost and hope you use your son a lot more!! Now I know where you son get's his good looks... DAD!! lol ;O }
@vlogsnstufflikethat5 ай бұрын
ive had this done several times throughout my life. it always felt food when they rubbed it. taking it off hurt 😂
@AdvancedOrthopedic10 жыл бұрын
Transferring to PE is tough because it cooks at a lower temperature. We cook it at 350 and transfer, but they always come out lighter than normal. If the paper is sticking you're either getting it too hot or leaving the paper on too long.
@abdallahnasr18068 жыл бұрын
thank you very helpfull and we want more
@bimmjim11 жыл бұрын
I tape my own ankles because I have CMT. It is difficult but I step lightly on the outside of the foot or I use a stick to push on the bottom of the foot as I tape. It is easier with a lace up ankle support. I stand on the foot as I lace it up. I'm still experimenting with this.
@sunshineusa20023 жыл бұрын
Is a hard cast needed for plantar fasciitis?
@AdvancedOrthopedic11 жыл бұрын
There are about as many opinions as there are orthotists. This is what works for me.
@angienataliacamposgomez16894 жыл бұрын
What type of material do you use to be the negative, is it some kind of plaster bandage or what is it called?
@915fubar10 жыл бұрын
Hi Kevin. I was wondering how I can transfer a pattern onto polyethylene? I try but it seems the paper bonds to the plastic. Any pointers??
@saifulsyazwanmohffadzil16508 жыл бұрын
Great video. Can I know what type of POP bandage you use and where to get it? Thank you for your time
@AdvancedOrthopedic8 жыл бұрын
+saiful syazwan mohf fadzil We use Techform synthetic casting tape. It is sold by Ossur.
@saifulsyazwanmohffadzil16508 жыл бұрын
Tq for the info. :D
@adhetv10 жыл бұрын
thank you very helpful
@opethforlife10 жыл бұрын
Thanks sir
@erasmoconzachulla17444 жыл бұрын
Yo aca en peru nesecito protesis derecho de la rodella abajo
@AdvancedOrthopedic4 жыл бұрын
Sorry, my spanish is not that good
@AdvancedOrthopedic11 жыл бұрын
The change is small. I prefer to cast in corrected alignment of the heel and forefoot. I correct dorsiflexion angle with the band saw. There is not a specific measurement I use for foot widening as it is minimal.
@AdvancedOrthopedic11 жыл бұрын
I don't understand the question. I believe the video is self explanatory.
@willianrodriguez40392 жыл бұрын
Muy. Técnico. La. Ferula. Tío. Wr
@willianrodriguez40392 жыл бұрын
Calidad. Muy. Bueno. Toi
@AdvancedOrthopedic10 жыл бұрын
I get them on ebay. They're made in Germany (Solingen preferably) and cost between $25 and $30. They last until you lose them. I've had one pair more than 2 or 3 years.
@tricialanise84884 жыл бұрын
Hello, nice video! Can you add a few links for the german shears?. I keep finding german hair scissors.
@mitchs36s8 жыл бұрын
Kevin, what plaster are you using to create your model? In one of the other videos I believe you stated it is mixed with perlite?
@AdvancedOrthopedic8 жыл бұрын
+Mitch Sweeney We mix our plaster with zonolite, aka vermiculite.
@mitchs36s8 жыл бұрын
+Advanced Orthopedic Designs thank you for the reply. I really enjoy your videos and I find your explanations to be very informative. I especially like the videos explaining your tooling, fabrication setup, and techniques. Do you offer training courses or seminars of any kind?
@AdvancedOrthopedic8 жыл бұрын
+Mitch Sweeney Thank you. I do occasionally lecture at different state and national meetings, but not to often as it's kinda busy here. I will be discussing alternative designs at Canada's annual meeting in August, but nothing else on the schedule yet. I will make more videos when I find time.
@mitchs36s8 жыл бұрын
+Advanced Orthopedic Designs do you have a brand of plaster that you would recommend?
@AdvancedOrthopedic8 жыл бұрын
+Mitch Sweeney We use USG No.1, but that's what they sell here. We're not picky about the brand, just that it's not clumpy.
@10mrturbo9 жыл бұрын
Ever try a "lip knife" to cut your AFO's? they work great! OH! and no way to cut the patient even if you miss.
@kenlow40283 жыл бұрын
Where can I find you in American
@kevinmatthews6833 жыл бұрын
I am in San Antonio, Texas 210-657-8100
@prachigupta77982 жыл бұрын
Hi
@bimmjim11 жыл бұрын
Wrong! The patient should be standing with weight on the foot when the shape is taken. Then the shape will be correct.
@syedmunawar97174 жыл бұрын
It may be difficult or uncomfortable for Patein even orthotist so better way to place flat board at plantar surface of foot to take shape and even maintain position of ankle in frontal and sagital plane.
@bimmjim2 ай бұрын
@@syedmunawar9717 I know because I have the same problem.
@EMR1135311 жыл бұрын
Test Dummy .............. lol
@meganodell37727 жыл бұрын
EMR11353 my name is Megan O'Dell and Where AFOs I saw your video I want to if you could help