Castle Talon ESC Stick Programming and Throttle Calibration (TT Raptor E550FBL)

[@bekman95]

Many thanks, no blabla straight to the point. great video !. Many thanks.

[@selivanyro]

This was amazingly helpful, well explained. Much appreciated thank you!

[@stevenmohr4588]

Thanks kindly for your concise guide! 👌👏👏👏

[@uirapurupuruuirapuru]

Thank you for the video! It helps me a lot!

[@johanbergkvist8834]

Excellent video, thank you for posting it!

[@waynemiller6070]

Helpful. Thanks.

[@distantship]

I've got a 180cfx and mistakenly did the throttle calibration with a non linear throttle curve. But during the process I was never able to get any beeping sounds out of the Talon 15 ESC. I unplugged and then never was able to arm or bind ever again. Even with a linear throttle curve it won't do the calibration because it won't arm. Damn this Castle Craptation.

[@Valkyry5]

Thank 100-million, buddy! Bought this thing from ebay and did NOT understand it or how to program it. Only thing I heard when I plugged it up was just beeps?! Best regards *

[@더블류에이]

Thank you for good video. I try to make a light car using Talon esc. Can I control BLDC motor in both directions with Talon? (bidirectional mode)

[@P61guy61]

Thanks for posting.

[@jeffwilliams409]

THANK YOU

[@nivasylstrongman4352]

i have a talon 120HV and i want to program high & low stick. throttle curve is 0,25,50,75,100 & my high and low endpoint are set to 30 each. i set the talon software to heli, set RPM, Gov mode, auto rotation enable, throttle trim setting @ zero. now, when put the throttle stick high and plug in the battery, i get a cell count then i gradually increase the high end point, nothing happens.

[@Valkyry5]

Opps...1 important question. How do you keep the the throttle from spooling up by itself when any throttle setting is chosen? thanks

[@zoxwolf2133]

I also have Raptor E550 and just finished setting up my Spirit pro. I still didnt connect my Talon to system. I hate stick programming but also i didnt yet order castle usb program card for same esc. Do you advise i use esc as it is never powered and all categories i want are factory default already? I mean i hope nobody at factory fiddle with esc..Can i believe to that statement? Cheers

[@EVERYTHINGcpo]

Hard to say, mat, with that little bit of information. It sounds to me like your radio is not yet properly configured and your channel mappings are wrong -- assuming the servos are plugged in correctly as you stated.

[@mateschbach3020]

I just bot a airplane and i pluhed every thing right and when i plug the batterie to the esc my servos just bugs out all 1 way plz help if you can ;(

[@DigitalArt-e3t]

my motor is responding with delay. i have the castle talon 25 in a t rex 250. somebody know how to fix this.

[@kevinskoda5272]

Servos acting up, could be the famous esc BEC problem with talon.. some people get it at 8v and some get it at 6v.. try buying or lending a bec from a friend, and se how it woks out then...