CAT 933 Sitting For Years Will It Run? - NNKH

[@NoNonsenseKnowHow]

Check It out on EBAY: www.ebay.com/itm/204064802121?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=thcQrUA-R0-&sssrc=2349624&ssuid=thcQrUA-R0-&var=&widget_ver=artemis&media=COPY Located in Chesterfield, NJ 0:00 Intro / Tour 04:10 Checking Stuff 15:12 First Crank Attempts 17:24 Fuel 21:27 Will It Start? 22:46 Moving It 25:28 Drone View 26:20 Overheat / Wrap Up 30:08 Opinion On Using This Intro In The Future? ~Merch and More NNKH @ linktr.ee/NoNonsenseKnowHow ~Dave LaBarge's Channel: kzbin.info

[@rocktoonzz]

See if @diesel creek might want it?

[@richb1128]

You have it listed as a 977 instead of 933.

[@NoNonsenseKnowHow]

Oops. Thanks

[@crforfreedom7407]

Let's be honest. IT IS SCRAP. Pull a few parts for EBay maybe, see if there's a buyer for the motor, but as a unit? Let's talk about the principle of "Point of diminishing return". A cost analysis would sink any common sensed, logical mind in about 15 minutes of statistical parts cost analysis.

[@hinz1]

$1000 might be scrap price, but the guy cutting it up as well as acetylene/oxygen isn't free either.... Basically a huge restauration project or big pile of scrap.

[@AnthonyMelite]

Dude. You helped me pick one of these up today. Guys tried to start it before me and failed. I watched this video and had her running in a couple hours for the cost of batteries. Bringing her home tomorrow. Thank you!!!!!

[@boomer150]

Money does make the world go round but another substance is just as important if not more important than money, diesel. Without diesel our world would grind to a halt, trucks, tractors, farm machinery, cranes, trains, ships and much much more ALL run on this miracle liquid. I just discovered your videos and I love em, dads a mechanic so fixing broken stuff is near and dear to my heart.

[@kapekodbob]

I'm with you on not caring for intro and if I am watching a channel a lot I will jump to the content. Therefor an intro of a few seconds is enough.

[@kevinquick2101]

There is probably nothing wrong with the batteries that didn't charge. Only two batteries were connected between the charger leads, so that's all that could have been charged unless the first two were cabled parallel to the second two. Since they were in series, the charge circuit only extended to the connected batteries. You would have needed to charge the second pair separate from the first pair to get all four charged.

[@farias0]

Personally I think no intro works, but that intro that Dave made was pretty rad

[@tractormatt4301]

Agreed. I will watch either way, but I love the get right to work right away attitude.

[@farias0]

Your dogs always bring me joy

[@billyhaddock5540]

Congrats NNKH on getting the Cat 933 Dozer up and running. alittle work and she should be great..

[@billmeeks736]

This is my favorite KZbin channel. Don’t change a thing. Thanks for all the hard work and time you spend on the videos.

[@QBRX]

Your mechanical knowhow always amazes me. It's really no nonsense!

[@captnsquid8151]

If you are going to start this Cat, or operate the hydraulics, get in and sit down, Standing on the track or any other place but your ass on the seat you are setting your self up for a big hurt, Be safe and am enjoying this vid.

[@ryanboldt7751]

I know nothing about heavy equipment, but I find this so fascinating!

[@ezrhino1803]

I'm not a big fan of intros. What attracted me to your videos was your immediate lets get into this. A prime example was the old red Ford P/U video you did. I was immediately captivated by the content and presentation. This is usually the same on all the channels I subscribe to including Camaratas and Diesel Creek who has a very small intro. If you want to add one I would make it a brief one. But hey its your channel you do what makes you happy brother....................

[@2flocks]

No one cares what you’re a fan of. Just skip ahead buddy

[@les3316]

@@2flocks actually the creator of the video ask for the viewers opinion at the end of the video if you watched the whole thing you might would know that 😆 so get a life troll and grow up

[@daveinarmstrong]

I love your Catapillar and Cadillac rescues. And the way you just dive in and start working. And the fact that you can get anything running. Please find more Dozers to resurrect! A D9 dozer, or any Dozer would be great! You've given me the confidence to buy an older Dozer and get it runnning.

[@jamesenderby5114]

Love it, love your style, enthusiasm and the ability to breath life into all sorts of machines that would otherwise end up in the scrapyard and landfill. Keep it up chap ! All the best from over here in England.

[@benallen197475]

I like how you dive right in on videos but I also like what he put together. Maybe use it exactly how you just did... as an 'outro' ... bonus footage type thing

[@MsGregjohnson]

All I know is either way I'll be here watching every single video you put up. I love the will it run videos more than anything, your ability to troubleshoot problems is legit second to none. I am an auto mechanic by trade but hung the tools up about 10 yrs ago. You make it exciting to figure things out.

[@fcmullins]

My Dad had a 933 Cat when I was a teenager in the 70s. Must've been older because it didn't have a turbo. I remember helping him replace the final drive bearings and the transmission clutches. Hard heavy work!

[@rocktoonzz]

I love that for an intro, send it!

[@diesellivesmatter]

The intro is very good and has the correct length. I do dislike intros on KZbin because I know what I am watching since I clicked into into, it's not tv anymore where they are choosing what I am watching and I need the intro to tell me if I'm going to like it or not. Might be a nice addition to the 1st video of a series of videos.

[@sheltonfoye6962]

Discovered this channel today….already one of my new favorites

[@mick00000000002]

Hats of you did a great job. Mmmm no words. Today. This is the owner views. To be true seeing the filters. And runs well. Wow. Hats of to you learning and trying. No complaints. God bless

[@johnelliott7375]

Gus and the fix almost everything. Glad Gus is available for supervision! Thanks for sharing your work and time with me and my family. Enjoy!

[@CrowsBrother]

Really like your videos the way you have done them until now,- without intro.

[@MrJfdixon]

You and Marty T in New Zealand....to cool for the room. You both feature great videos.

[@AnthonyRBlacker]

Holy SMOKES that fuel filter!! Wow.. what a gem though, only at 7 minutes, but thank you SO much for being a part of saving this old iron.. It would be so sad to see that chopped up for scrap! edit: it's cool you live so close to me, I am 20 minutes from Columbus.. I'm on the river (grew up in Florence where the PA turnpike bridge is).. awesome to have some local stuff for me on here.. seems like most channels are out west or down south.. : ) Also the intro would be cool, short sweet and right to the point! Yes she is a squirter! haha

[@radarnj8043]

Colin Size had the great idea. The voice over in the intro is your humorous comment for what’s ahead in the blog. Sweet logo. Intro is fast like your vlog style.👍🏻

[@jameslindley924]

Great Job !! Nice to hear and see the 933 awake and still kickin

[@walterrobbins4470]

I like an introduction to see what the episode is about and get a little history about the project

[@DavidWade55]

☹️some people just don’t deserve owning stuff they carnt maintain,just total neglect,bottom line , well done in getting it going your amazing , not phased by anything, ,thanks for your vids ,

[@mattbrown5511]

I say do what makes you comfortable. Great job on that Cat. I hope she finds a good home.

[@nicklewis2734]

29.45… that jazzy track is awesome. You should use that as your music intro or at the end of your vids.. Another great show Chris.. keep up the great work you do brother.. Nick in London UK

[@clintwatts9863]

Man can get anything running wow !!

[@raprap1071]

I live to far but dont let it go to scrap. Its older than l am and will still work hard. Good machine still please dont let it go to scrap!!

[@dennislaws5187]

I was raised running one of those, The G was the BEST model.

[@scottsmith8546]

The best advice for an intro, is to do what you like best! Afterall, it's your channel and your really good at it!

[@MrPhotodoc]

As a kid in the late '50's I used to get chased out of the local scrapyards trying to do the same thing people do today making films like this on KZbin. It's a wonderful time to be alive.

[@Johnsmusic416]

If you don’t like intros maybe just use that cool picture for the beginning and endings of your videos - Even use that pic for hats and T-shirts

[@stephenkrzanowski]

Like the proposed intro. Nice & quick. Over & done.

[@CliffordRainwater]

Honestly I speed through intros myself.

[@ramprasadswargam6389]

You are a lucky person and also you are a perfect restorer any vehicle problem is simply identified and start the vehicle.

[@john-j-butler]

I think the intro is good. a couple of clips of the bass dumpster or air boat just to show the wide content. And probably remove the last phrase and just say " no nonsense know how" Thanks for the time and effort Chris. Australia is watching JB

[@williamallen6934]

Nice I love new parts I ran a 933 tracker for 30 years nice tractors if you know them and treat them right .love your dog hes cool

[@randyf82]

That intro is awesome. Love it!

[@cigaroking]

No intro needed. Love the content

[@hfdzl]

The track pads are triple grouser. Nice for flat grading, not really worn out.

[@robertrojas4319]

I loved the intro. It had the 2 best things associated with you . Booty shaking Jen and Gus. keep the girl I want the dog. tu Amigo Robert

[@JorgeDiaz-ly5qp]

GREAT VIDEO! Frankly, I enjoy your cold starts to your videos. It seems natural and non-pretentious. Like you, your videos go straight to the business end of matters. You're doing great, don't change a thing!!!

[@Frank-Thoresen]

I liked the way you were troubleshooting and found solutions and getting results 👍

[@FerociousPancake888]

You got so lucky on that last blowout. Just continue to make good decisions and be extra safe working around those old hydraulic lines. Those things can change your life for the worse in about 0.01 seconds! If anyone is curious about how awful blown lines can be just look up hydraulic injection injury debridement photos.

[@NoNonsenseKnowHow]

Yea for sure

[@AndrewBrowner]

hydraulic injection requires you to be pretty close or even in contact with the hose, its not going to hold that pressure and pinpoint stream after several feet of blasting through the air... and what exactly is the solution? replace every hose on every machine every 5 years?

[@ksw501]

She’s a beauty! I sure could use a machine like this, too bad it’s too far away to make it practical with the cost of shipping, saw a couple of these machines at a scrap yard, so sad

[@mick00000000002]

I learn today. About the fuel filter. Thank you. )))))))))) never seen a filter like that. God bless. ))))))

[@BS.-.-]

Great video. You never charged the other pair of batteries on the left side. You cant change a bank like that with a 12v charger if you dont move the clamps to the other pair.

[@NoNonsenseKnowHow]

I actually did try charging them separately but they weren't taking a charge. Maybe if I left them on there for a while they would have

[@debi6598]

We love your videos and love that you don't have an into. we like that you just start right in. 😎

[@redboatlover1976]

This is the third video we’re you work in rain you are hard, I promise that non of your viewers will be mad if you wait till rain stops we will be here waiting

[@webbiergoose2032]

i could not do it but that is the coolest manliest stuff ever to me

[@fonz323]

The intro is good, keep it.

[@gofishingwhenyoucan]

Another awesome video by my friend

[@davidortiz4808]

My friend you have a fan ! I knew you were going to turn over that CAT as soon as I saw you turn that crank. And when you turn it on that was amazing. A very satisfactory moment. Gonna watch the U HAUL one next. Good luck brother. 👍😎🪐

[@les3316]

That hose blowing on the cat 977 was insane almost got ya in your eyes

[@fredspindor1624]

Most people refer to them as a Track Loader Good video

[@motty420]

6:55 your reaction is priceless

[@donaldhalls2189]

That dozer is cool how they still operate rams etc, my hoist was only out in the weather for 5 years and the shaft had surfaces rust all up the shaft,the intro looks good, all the best to you and your loved ones

[@darylball4717]

I hope someone buys it the owner should want it saved sounds like money is all he cares about.

[@UTubed119]

The intro is cool. Short and sweet. Drop the "She's a squirter" from the end and i think it's fine.

[@rhyswoodman6781]

Chris please when your playing with these old hydraulics wear safety glasses when you test the bucket movements. I'm pretty sure I speak for everyone when I say we don't want to see you hurt. We need your videos. 😂

[@opiumtrail7032]

you're*

[@norsuist]

@@opiumtrail7032 nope

[@thickgirlsneedlove2190]

@@opiumtrail7032 Nope not even

[@opiumtrail7032]

@@thickgirlsneedlove2190 ,yep even. Refer to the first sentence.

[@scroungasworkshop4663]

I love your channel guys. 5 months ago in the first Chevelle video you mentioned that people liked Vice Grip Garage. Well I like the way you do things, I’m not keen on working on a car on the side of the road either. That’s why I watch your channel, I like the way you do things and Jen is so sweet she really is the icing on cake, so keep on keeping on just the way you are. Cheers Stuart, Canberra, Australia 🇦🇺

[@Groteseh.]

Superb video once again 🍻

[@HamiltonvilleFarm]

Nice nod to Project Farm with the shirt👍

[@DPcar-mania-65]

Great viewing as always 👍 Enjoy your will it start, repairs, driving, boating videos. 🔧🔨⚙🗜🐶

[@randyriggs5463]

I sure do like those old machines. That one sounded like it was ready to back to work! Thanks for the video. Would like to see an update on this one!

[@wiedietie]

30:10 Cool intro, love it 👍

[@jefferybye2169]

Another great video from NNKH..Thanks Chris i greatly appreciate what you do..you rock dude 🤘🤘🤘🍻..Jeff from Pennsville

[@johnjyoungjr7400]

Intro or not l'm gonna watch either way! Great channel! The product reviews, the shorts, Jen's singing,all good stuff! I know she says she don't want a ring but come dude what are you wanting for. She's a great catch. You guys are good together. More Gus!

[@CerebralAilment]

I think Andrew needs one of those to complete his collection of 9 series track loaders

[@colinvargo3418]

Dude, he would fix everything on this thing and then put it to work immediately.

[@richmill6043]

Yup Andrew buys a new machine or attachment weekly! 😂

[@pereiraroben1433]

Esse 933 no Brasil, ainda estaria na batalha pelos interiores do país abrindo ramais. Good Job. 👍🏼

[@garywalther7939]

Start watching you because I have a 12 valve Cummings diesel 97 Dodge. If it wasn't for you I'd still be trying to figure out how to diagnosed to fuel system and keep it running great work.

[@JeffreyEral]

I think you should skip intros. Your videos are different than everyone else's and it works really well.

[@drewdemien481]

Wish i had the money. That would be a fun project, and I need one for my half acre clearing. Rent cost like 500 a weekend now

[@a.stelline]

I like the intro and how short it is, I agree not a fan of them usually but that ones quick enough it doesn’t make me want to skip it, I’d loose the squirter tho just doesn’t seem like a good fit, just my opinion tho

[@k-dawg3893]

A nice short intro like that would be cool. Plus we get another look at Jen’s smiling face😉

[@pmhullentertainment2068]

Thank you for making this video available to show this old Cat. Is still in full working order. So that any right-minded collector will want this peace of tractor history. 👍

[@williamallen6934]

Those primers never worked that great any way manual prime it bust the injectors loose and fire it up bro.you got this I love your show .

[@KyBrancaccio]

I think you under estimate Guss, he clearly took out a deer and is delighting in his treasure

[@Buckarooooooooo]

Man I get so excited for these videos. I learn so much every time. Thank you for making these.

[@williamallen6934]

That cat has potential and they run better without a filter

[@richmill6043]

Since you have the master key, no other key is needed!😎👌 intro was nice!

[@TechGorilla1987]

@9:36 - "Got no key for the hydraulic tank" - It's a Master lock so anything from a stern look to a cat food tin lid should suffice. Turns out that you had the master key after all.

[@arcticenterprises2337]

Yes on the intro , needs a master 😀

[@t1259sw]

Guss is the star of the show, get video saving another old iron.

[@unknowncharva2070]

Watching from chesterfield UK 🇬🇧

[@philgaroni5914]

Another good video, thanks for taking us along. As for the intro, generally not a fan of most of them but this one is a keeper. Fun & short !!

[@mrcoconut9205]

Showed this to my grandpa (he's been working for cat since the 50s and moved to Pontiac IL in the 70-80s for a management position unfortunately I heard they're moving the plant) brought back some memories for him c:

[@keyhook4039]

you should get a hold of Matt who has a channel called diesel creek if you want this thing to go to a good home plus you could see it in action from time to time pretty close to you to in P.A.

[@danieljames4405]

Love the patina on it!

[@timothyjohnson6258]

Always enjoy the vids, nice variety. As to the intro; I am with you. I like the "let's get to it" look of videos but if you feel you need one, please don't make it one of those that drags on and on for 90-120 seconds and the video is half over before we get to see the project. Thanks!

[@bryanewing5058]

I like the intro. The squirter thing makes me laugh and starts me out in a good mood. I like seeing the Detroit red lining and Jen chilling in the Chevelle. It might need a little tweaking but overall I think you should use the intro. 👍🏼👍🏼

[@NoNonsenseKnowHow]

Awesome. Thanks for the feedback man!

[@danderson9881]

Ive heard of antiquated pos machinery, yet with some TLC will out work the new junk and save a pile of money. Plus you don't need a tech to decifer the codes, just make it work.

[@stevesalvage1089]

Great filming ! Thanks for sharing !

[@ryzen397]

what a beast of a machine. Good Job man