Cat D11T Dozer Ripping and Pushing Gravel.

Some more footage of the Finning UK & Ireland supplied Cat D11T

[@prm414]

This shows that a video can be made using just the sound of the equipment, brilliant.

[@blood852000]

Damn right not those fuking crap music playing

[@sammhill8686]

My hat is off the the videographer, it's obvious he worked hard. Fantastic job.

[@robertdufresne9195]

This dozer is my favourite because of its weight. Power is ideal. Quality is another reason. It gets the job done . 🇨🇦 .

[@jesuslovesgunviolencejesus3769]

Does Canada have any Canadian industrial/agricultural/mining equipment manufacturers?

[@agustindelriomonroy4609]

Este es un claro ejemplo de un buen operador y una excelente maquina . Realizando un trabajo impecable sin forzar la maquina . Excelente video

[@UnknowableAbsolute]

D11 is my dream even not for work, but for fun. This thing more massive than main battle tank

[@davidwillard7334]

PANZER !! TANK !! WOULD !! DO !! A !! BETTER !! JOB !! THAN !! THIS !! CAT !! CRAP !!!!!

[@johngardeajr.1425]

@@davidwillard7334 What are you smoking? Lol

[@davidwillard7334]

@@johngardeajr.1425 Fresh Air !

[@davidwillard7334]

@@johngardeajr.1425 Fresh Air !

[@dieselfunk65]

Awesome video, great operator, great dozer.

[@scruffy6151]

Reading the comments shows how little people know about heavy operation or the job site. Thank you for the nice dozer video.

[@Murphyslawfarm]

G'day again mate

[@davidwillard7334]

THEY !! KNOW !! AN !! ABSOLUTE !! LOT !! MORE !! THAN !! YOU !! DO !!! THAT'S !! FOR !! SURE !!!

[@General-Mayhem]

TROLL !!! ALERT !!!

[@davidwillard7334]

@@General-Mayhem TRAMPING !! TRAMPING !!! TRAMPING !!!!!

[@General-Mayhem]

@@davidwillard7334 Point proven! What?

[@desertmulehunter]

What a beast! Cool vid

[@MrDefreese]

Magnificent!

[@ConstructionMachinesChannel]

Super video. If you don't mind me asking, what camera & mic do you use?

[@meddylad]

Imagine doing this for 10 hours a day.... everyday......every single day just up, down, up, down.... I love these machines, but I could never work one. Respect

[@danielheady2786]

ive only been on a d2 this is absolutely wild

[@GlobalistJuice]

You would think the D11 would have given the operator a fully functional front-to-back swivel seat & control deck by now ...?

[@shanepersons383]

Love it!! Letter eat!! ✌✌✌

[@athonynesbitt7956]

I cant wait to buy 2 of these D11's😁

[@timmayer8723]

Athony Nesbitt All in $6,000,000!

[@Gavin84w]

i sold 2 at once to one customer, big day

[@davidwillard7334]

HEY !!! RETIREMENT !! MONEY !!!

[@xreconusmc3156]

All the Sunday quarter backs are out but I been running a dozer sum 27 years. Unreal.

[@teddymullins3706]

It's easy to tell he is on the bottom of the shot or he has cut all the loose material off the top of the drill bench I know I've been there I have 25 years experience on a d 11 in the coal fields of Southwest Virginia

[@ed777tx-edward8]

That beast can move a lot of dirt! I guess they pay for themselves in a short period of time?great video thank you.

[@tdv1985]

I can’t understand why Cat wants to put mirrors on top of the lift jacks. Obviously they’ve never had track lights shine in their eyes for 10 hours from those mirrors lol.

[@danielhansen6991]

Let the machine do the talking, very cool.

[@hildecyxavier3957]

Muito bacana de ver 👍

[@user-li6iq3tt2o]

WOW I love that dozer

[@zaankhajjak]

very Powerful Dozer

[@alirioortegaperez6679]

Yo he trabajado con un D8N y esas maquinas son muy buenas

[@freddymirandamachuca2546]

Buen operador y hermosa máquina

[@MrAJWorks]

👍👍👍

[@wahyusetiono8318]

Aku dulu pernah bawa D11 N. Di THIESS. Senakin. 1994

[@rorysr.fundell2564]

What a monster! Way to go Caterpillar!!!🇱🇷🇱🇷🇱🇷

[@MrWhiseguyy]

Nice!

[@d.j.mccormick5139]

Is it just me,or is that sand & gravel deposit super hard?

[@patrickangell5387]

The gravel deposit is probably on top of a hard clay base.

[@alexandredias3814]

Bela máquina.

[@JF-xq6fr]

No beep on backup???

[@sammiguel5945]

I don't think he knows what he doing. Always try to rip and push down hill. Great video

[@LeoAlmeidaBRASIL]

POWER

[@ransomtester5347]

👍👍✌

[@GO00365]

How much is it ? How much is this ?

[@user-iu6hg4ne8i]

👍👍👍👍👍💪

[@carlosescobar6973]

BEAUTYFULL!!

[@bacazterchovej2235]

this is gravel ? wow, my gravel looks quite different.

[@motomaniac-cw9vy]

Gravel looks alot darker when it hasn't been exposed to the sun there is moisture on it.

[@paulpence8895]

Lots of Stokey vids.... what are they mining????

[@mikesmithey4882]

If you ask me I'm not an engineer but just watching these machines work the bigger they get the wider the tracks need to be the deeper the tread needs to be and the longer they need to be because I watch these great big dozers and you can see the tracks slipping they push huge loads downhill just fine because they got the weight behind their ass and a giant blade but they can't push loads on flat ground or uphill near is good because the tracks just slip if they were deeper maybe put teeth in them or cups for forward movement make them whiter and will much longer there's plenty of room to make them longer for the size of the machine if you look at it proportionately

[@stevenowen4150]

Why not make the stockpile in the middle of the two sides. Fuel n undercarriages costa lotsa money. That way he would be pushing down hill.🤷🏻‍♂️

[@davidwillard7334]

HOPELESS !!! OPERATOR !!!

[@adailtosantos4486]

Isso aí sim. É a ferramenta. Eu tenho conhecimento. Com a operação. 😂😂

[@raymondquave1237]

Your working again st yourself, ,pushed the top first

[@chrisstaylor8377]

Why is he,she ripping up hill ?

[@waynecompton7612]

Good Afternoon, Thank you for the video!! It’s a nice machine!! Perhaps it’s better to rip downhill ????? 👍😎🇬🇧.

[@Medicineranch]

Wayne Compton I was hoping someone would educate me on why not the downhill rip

[@AwesomeEarthmovers]

All the material he is ripping has to be pushed in the up hill direction. Ripping downhill would mean constantly turning around 180 degrees for not much benefit.

[@andrewrobertson5602]

@@AwesomeEarthmovers I got ya thanks much...

[@pauldhanjal8040]

@@andrewrobertson5602 Ripping down hill is the most effective way, You rip your entire work area, then you push it off, this way you only turn around once, then once its all pushed as per the slot dozing technique you then clean up your windows, then proceed to rip you hole work area again. I do this for a living on a D11t in an oilsand mine, I have done many Caterpillar sponsored dozer courses, we have 25 D11's where I work with more on the way to support our 90 plus 400 ton truck fleet.

[@michaelmorris3317]

Paul Dhanjal someone has got some sense

[@AlexSandro-cs5qo]

Deveria ter uma estreira mais larga. Pelo o tamanho da maquina a esteira e estreita

[@NAS-vj5is]

Aí física amigo! Pelo contrário, como a máquina é maior e mais pesada, a pressão, aderência da esteira ao chão por cm quadrado é consideravelmente maior, o que otimiza a relação peso/potência/aderência, se a esteira fosse mais larga o equipamento ficaria mais pesado, a pressão ao solo menor, e certamente não teria o mesmo rendimento.

[@neilrafferty2097]

I don’t know for sure but wouldnt downhill be better ?

[@bobhumberston3021]

looking at lights this radio controlled? great video

[@john-t_smith7781]

🙄There must be a plastic guy in the in the cab en😏🤣🤣😂

[@bobhumberston3021]

@@john-t_smith7781 i have seen that style lights on radio types,maybe testing, would like to know more

[@kennethwalsh3078]

Fuckin love it,

[@NocyMusic]

Caterpillar machines rules the earth 🌍

[@alexandrehenrique4471]

Nunca vi escalificar com trator subindo .

[@JoseAlvarez-ik4mt]

Con esa máquina ,no le veo yo mucho saque al paisano🙈🙈

[@aidansharples7751]

woulda been way faster with a 2020

[@faridfarid7325]

Hello, do you have any job vacancies?

[@just_some_internet_guy]

What an amazing Bulldozer! Sure over 1.5 million US.

[@CRISISMACHINES]

bro!!!

[@user-sx8bw3jq4m]

🤝🤝🤝👍👍👍👍👍❤️Levooooooooooooooooooooo CTAR BLER D 11T

[@tassi13827]

No way is this gravel, gravel doesn't have to be ripped. it is more like hardpacked silty sand and stone.

[@phillipjones8976]

CAT

[@jumbo8996]

That is one mother of a tool.

[@kenjett2434]

This may be a stupid question but why would a machine of this size need to rip gravel? It should easily cut that material with the blade. If you have frozen ground or solid rock yes ripping is a must. Ripping this looks like a waste of valuable time wear and fuel. Unless there is some unseen reason that camera doesn't show.

[@AwesomeEarthmovers]

Ken Jett it’s much harder than it looks. You can also get pockets of really hard stuff. I have a video of Komatsu’s D11 equivalent not being able to penetrate material like this at all with the ripper.

[@kenjett2434]

@@AwesomeEarthmovers well that makes sense was just wondering sometimes you cant see everything with a camera. But in general with gravel ripping isnt necessary. But that is why i asked was a heavy equipment operator myself for years and have pushed my share of all kinds of material. One of my most precarious jobs was pushing blasted rock off a 200 foot high wall. That can test your nerves.

[@gregtaylor8327]

@@kenjett2434 yeah righto.

[@kenjett2434]

@@specialk3373 just exactly what are you trying to refer? All i was doing was laying out the fact that i had alot of experience to justify my original question. I wasnt trying to be a troll or some smart a$$.

[@NocyMusic]

They rip the gravel for may be hidden rocks 🪨

[@roliedaanoy2013]

You dont need to use reaper that kind of material you west your time..d11t is so powerful enough to push that materials.

[@alaefarmestatesllc]

Ur a bozo

[@galdinosantos9033]

Parabens pela filmag eumo a linha da cartepila tequinologia muito avansada na terra planage mas sefoce posive traduzi en portugues o brigado

[@chancequesnelle3140]

Call me crazy or maybe I'll just stick to moving dirt or digging trench with the trackheo but I've always been told by dozer guys DON'T PUSH UP HILL!!!!! ITS HARD ON THE MACHINES!? 🤷🏻‍♂️ WHATEVER but I've always been told that huh 🤷🏻‍♂️

[@andrewrees8749]

Where is quarry

[@outfoxthefox]

North Staffordshire, UK

[@moajjamhossenkhanfahim1176]

গাড়িটা নাম কি

[@moveon8088]

Tinny shoe

[@peteroconnor2877]

Small = grip Wide = float.

[@tukaramkarad737]

Hi🎉🎉🎉

[@user-gd6vs1hv4m]

장난하냐

[@frankhering3496]

p

[@PistolPete8510]

Works better when you rip and push downhill!

[@AwesomeEarthmovers]

How are you going to do that when the point you have to push it to is uphill? Are you going to turn 180 every time you need to rip a bit as well?

[@davidwillard7334]

SHOW ! THIS ! GUY ! HOW ! TO ! DO !! IT !!

[@user-cr9bx2oh8n]

ดีเยี่ยมมากเลยชอบมากๆ ครับ อยากมีใช้ที่ไทย จัง ขอบคุณที่คุณนำมาให้ได้เห็นรุ่นใหญ่ๆน่ะครับ เอฟซีไทยแลนด์ fc.Thailand

[@elfynevans7387]

Sorry but to push up hill is stupidity and yes I know the loader is underneath the stockpile. But surely their is a better way of working than this..ripping and pushing up hill.fuel efficiency or what. Been in this Quarry and I've worked here..doing this is destroying the undercarriage..

[@AwesomeEarthmovers]

He has to push it up into a stockpile for a wheel loader. When he first started on that gravel deposit he would have been pushing and ripping downhill but as he’s got deeper he can only go uphill.

[@cyrilforde7925]

@@AwesomeEarthmovers to

[@joseluissuarezhernandez6079]

Hola soy dominicano y mi sueño es poder operar el dozer d11 porfabol soy muy buen operador y mi sueño es poder operar cada equipo ya se operar 6 pero quiero trabajar en un d11 porfabol alguien me ayuda es mi sueño

[@petes7796]

The only thing I see is a dog and pony show, wasting fuel and wearing down tracks

[@ConstructionMachinesChannel]

Super video. If you don't mind me asking, what camera & mic do you use?

[@AwesomeEarthmovers]

Construction Machines Channel Panasonic GH5 with a Rode mic

[@ConstructionMachinesChannel]

@@AwesomeEarthmovers Thanks