Catch can loop-de-loop

[@HarleyJewRider]

Great video. Just got mine installed. Thanks for doing the video of it.

[@MrYingvar]

The can you used is designed for a V8. Looks clean, but you could downsize a bit. Although you shouldn't have to clean it for about 80 thousand miles.

[@gnd111]

Will need cleaned every 3 months with the Vtwin

[@rykerolaoghaire8781]

Excellent work! 👍👍

[@robdedgar]

This is exactly the setup I want on my Harley's. Thank you!

[@jamessturtz728]

If I were you, I would route that hose from the front breather bolt under the standoff rather than in front of the throttle body. You will get a smoother flow of air to it. Clean air is important but so is a smooth flow of air. It's been proven in tests.

[@dannypagansoto9831]

Using a y fitting instead of the t fitting would flow better.

[@gunner9010]

Clean setup. Very nice!

[@PokeDave978]

This is awesome nice video thank you

[@bischoffrob]

it would be necessary to bring a return pipe into the intake to create a vacuum in the suction of the breather and remove the small filter, this is what has been done on the cars

[@jim1407]

Doesn’t the case ventilation need the vacuum from the intake? Looks cool just not sure the crankcase is being ventilated, there is a method that uses a catch can while still getting the ventilation.

[@alfonsothegreat4481]

The case needs to be relieved of the pressure

[@bischoffrob]

would have to bring a pipe back into the intake to create a vacuum in the breather suction

[@robertrodriguez2412]

Looks like a pretty clean setup. Good work. Did it affect the idle or ECM in anyway? Thanks.

[@alfonsothegreat4481]

It’s more responsive. Runs a lot better

[@punishinghammer2440]

It's well known that crankcase vent tubing will reprogram the electronic control module.

[@FranBunnyFFXII]

I got Trask CheckM8 to take care of the breather problem, and then deleted the tubes inside the air intake, instead of trying to do an external vent. Works great.

[@markjohnson998]

Do you have a link or parts list that you used from Amazon?

[@RanGer-498]

Im wondering how he mounted the catch can exactly, i. Guessing its a cc from amazon or ebay. Nice clean look.

[@alfonsothegreat4481]

It’s just a L bracket from Amazon (ROADPRO RP-235 Adjustable Universal Mounting Bracket for CB/Ham Radio & Scanners) I bolted it on the passenger peg

[@RanGer-498]

@@alfonsothegreat4481 ahh ok the passenger peg thanks

[@raymunchieftain4170]

Good work Bro !!!!!!

[@4dogsgaming]

You're bike shouldn't need a catch can. If it's spitting out that much oil then you need to look at the umbrella valve in the rocker box.

[@daveh1880]

Yes can I see the back of the catch can to see how it is mounted

[@bluddyrowdy8757]

what do ya mean ' its not touching the exhaust ' ? We can clearly see that it is and also bluddy melting. Also that same hose goes Lower than the Input to the catch can, surely it needs to be ' downhill' from your attachment to the Can, otherwise its just causing a 'fluid-lock' and thus problems with Flow ?. No-way run Anything across mouth of Carbie - not only does that restrict flow ( yes minor agreed ) but is liable to be ' sucked-In' !! And don ask what happens if the engine 'backfires', because all I see is a potential for a bluddy Fire. Points for effort sure, but please do Much better than that....

[@RayfordRaySiegel]

Very cool I didn't know that there would be hoses routed into your carburetor or throttle body, from the factory. What brand is that catch can setup?

[@alfonsothegreat4481]

Amazon. Just type catch can

[@gnd111]

EPA version of PCV on a Vtwin

[@bubbanezz]

Have you got a link to the “t” and the 90 degree brass fitting? Love what you’ve done there.

[@alfonsothegreat4481]

AMAZON Joywayus 1/4''ID Hose Barb Thru-Bulk Head Hex 90 Degree L Right Angle Elbow Union Brass Fitting

[@kuenmunlee182]

Just a question. What size of the drill did you use to fit the 90 degree elbow brass? Please and thank you.

[@alfonsothegreat4481]

Just slightly bigger than the elbow connectors, but smaller than the nut & washer.

[@iginogasparini3369]

Doesn’t the air filter pitch the breather hose’s when installed

[@alfonsothegreat4481]

No It fits perfectly

[@jerryjohnson7533]

What size hose did you use? I’m putting that same set up on my bike. 2021 Road Glide

[@alfonsothegreat4481]

Amazon Ucreative 5FT High Temperature Silicone Vacuum Tubing Hose Black (1/4" (6mm))

[@joegarcia733]

I wanted to see you put the filter on.

[@alfonsothegreat4481]

It fits fine

[@tommannion5636]

Can you tell us what tubing you used?

[@alfonsothegreat4481]

Nylon Tubing Fuel Line 1/4 ID Tube Pneumatic Hose 5/16 OD Black from Amazon

[@terryhubbard9267]

Just run it into top of trans, putting it back into circulation

[@alfonsothegreat4481]

At the same time, you have to have fun, right?

[@jessebunker6062]

Why would you want to put condensate and gas vapor into your oil?

[@Rollanotheronemyfriend]

If you would stop over filling with oil a catch can wouldn't be necessary

[@alfonsothegreat4481]

Not true to some extent. You still get water and oxygen depleted air into your air intake

[@Rollanotheronemyfriend]

@ALFONSO thegreat yes and that's normal

[@scottjohnson7495]

Do you want a Harley Davidson that was not built write. or a bike that was built write. what a shame

[@alfonsothegreat4481]

Harley-Davidson is building kind of right. And not do

[@RoadieWingZZ]

“Right” not “write”. Grammar and punctuation are actual things in the real world….🤦‍♂️

[@scottjohnson7495]

@@RoadieWingZZ bite me

[@alfonsothegreat4481]

@@RoadieWingZZ give ‘em a break. Don’t be harsh

[@atcjoe1600]

It’s not Harley Davidson , but the EPA . Crankcase breathers use to drip on the ground years ago.

[@deansheffy8946]

This rig is just about useless.

[@scottjohnson7495]

Till the next thing is junk

[@alfonsothegreat4481]

???

[@RayfordRaySiegel]

I don't get it, either.

[@daveh1880]

Yes can I see the back of the catch can to see how it is mounted