Catch Cans - find out the truth ! Are they worth fitting to a 2023 Mach 1

In this video I look at the Ford Performance oil collectors / catch cans I have installed to see if its worth installing both sides and if they actually work.
#mustang #ford #mach1 #2023 #2021 #2022 #2024 #shelby #darkhorse #spain #GTD #S550 #S650 #americancar #Steeda #fordperformance #exhaust #viral #mostpopular #video #supercars #carsandcoffee #sportscar #cars #youtube #modded #gt #5.0 #v8 #blog #review #drive #roadtest #engine #intake

[@GarveyMustangMan]

Same for me, the driver side is dry, but if you track the car, the passenger side will acquire more oil vapors with the high RPM’s.

[@icemach1964]

Hi, I'm hoping to take it to a track day. Thanks for watching

[@icemach1964]

Hi Patrick, if you buy a Mach 1 they come fitted with oil cooler, trans cooler and diff cooler as standard. The catch can is a must be in my opinion and as Ford Performance offer them as upgrades they are easy to install. 😉

[@romirro]

Thanks for the info. I only have a CatchCan on the passenger side. Now I know that I can save the one on the driver's side. Thanks! Here's another video of me on the trip. in Germany in Bavaria. kzbin.info/www/bejne/nXzNl6KJqN-bo80si=bct7H8ztzqlE08u1

[@icemach1964]

Hi, I decided to fit the drivers side as I was not sure if I needed it. I would still fit one on the driver's side dispite there being no oil in it at the time I checked it as I want to be 100% sure no oil will get into the intake manifold and valves in the future. Thanks for watching 👍🏼

[@icemach1964]

Nice video of your car and the mountains

[@peterpring-shambler6160]

Just fitted the pair of catch cans to my 21 Mach 1. You do interesting videos, keep it up. By the way, do you think you could give us a little more info on the baffle you made for the fog light hole to direct the air into the air filter inlet.

[@icemach1964]

Hi Peter, thanks for watching. Regards the funnel for the air inlet ford had already closed it in behind the grille. I took out the cover and discovered that the side was open next to the radiator. I wanted to create a funnel as no aftermarket company offers one for the M1. I used some strong flexible black plastic to form the two sides of the funnel. I started with a larger section and just kept cutting small pieces off until it fitted. It did take some time, probably 3 hours for both sides. I drilled some small holes and used push pins to hold the panels in place. When finished I had made a proper funnel that in conjunction with the air box cover gives me true ram air from the front of the car. When fabricating these panels I just had to keep taking them out, making cuts, then installing them again over and over until they were perfect and look like factory installation. I Hope that helps? 👍🏼

[@patrickfabrie1573]

​@icemach1964 never thought their would be so much oil in there😮, first thing I will install on my mustang! Have you ever had issues with your oil cooler? There are a lot KZbin movies where they advised to install one, did you ever experience problems with your oil temperature, especially with the hot temperatures in Spain?