CATERPILLAR WHEEL LOADER AUCTION BUY! ITS GOT SERIOUS ISSUES !!! Lets Fix It!!

[@dannyv2335]

That machine is perfect for your yard

[@plumber802]

Yes, lots of hours on that machine but it seems to run strong. Tires look good. Definitely a solid machine. I think you did well.

[@localcrew]

Loaders are so handy to have. That’s why I got TWO of ‘em! You’ll probably end up keeping it.

[@sasastankovic8760]

These loaders are great around the farm or junk yards, especially with that rotating fork assembly.

[@Fatamus]

Got coffee ☕ . 😡 man o man the throttle is giving you fits at every step..... 🤗 the pain is real. That's why I like working on the old stuff challenges. Anybody can work, on the new stuff.🤥 shit more computer than truck. Thanks FTI ...👍

[@mikeharkins4825]

That’s the kind of equipment I buy. By the time I get it like I want it. I fall in love with it. Now you know the rest of the story. 🚜🚜

[@jeffmaclean7700]

Perfect yard machine keep it

[@G-Man-kc2nm]

Looks like the old 930 loader. This unit is very handy around the shop. I would keep the machine for your shop, excellent for the mud in the back storage area. However: if you insist on gifting it away, I’ll start making room! Lol Great buy, thanks for the video.

[@larannar123]

Great deal!! Loader just needs a little TLC and it will serve you well.... It really aggravates me with companies that don't clean their equipment... All that filth creates rust,destroys seals ,bearings and pins,causes parts to sieze,so damaging....🙄

[@chadbrooker3147]

I'd say you should keep it for the shop but I'd like to see a video showing it getting a little bit of a better cleaning and I guess grease and lube it up then it could be put back to work around your shop

[@minimanjos84]

Cool video, nice to watch. A suggestion though, it's satisfying seeing the power washing, but might be worth speeding that section up, double speed or something.

[@henkoosterhof5947]

Keep it until you get a fair offer. With that rotator on the forks its handy for assembly/disassembly. A chain on each fork on front/back of engine/part. You can tilt it while hoisting in/out. I used a chain block for that purposes.

[@geegelle3204]

Love that you brought it back to life!

[@daviddelaney5180]

Been looking for the next video! Glad I found it! Thanks for sharing!🎉

[@daddywoofdawg]

I would be interested in the machine. but looking at your yard you may want to keep it.

[@ciaranxr8]

Perfect for your yard and implement tools are a handy thing to keep in a workshop's arsenal

[@shaneharrison4775]

Would be a nice shop piece providing it's properly maintained

[@dalemac7355]

I've run the 910 version of the IT12 and was a great little loader for getting around the housing track's behind the curb line and between the building backfill utility ditches

[@heavymachinery2843]

Nice i have a 1978 920 cat love that thing

[@raytalbot5890]

Jet wash it while you have the floor off 🇬🇧🇬🇧👍👍

[@larrybreuer4495]

KEEP IT! 👍👍❤️

[@Bjarne045]

Hi, When Do you plan an update on your classic truck you saved? Very exiting to follow your channel.

[@artk6177]

Awesome video. Thanks for sharing.

[@pinwizz69]

Did you check blowby on the engine oil level dip stick ? One of the first things you check on an old unknown engine to determine it's running condition. Overall, given the crazy prices pre emission / computer equipment is getting it's worth doing whatever needs to be done to resell it with a good feeling you haven't pulled a fast one.

[@Fatamus]

Really like your channel. Sorry got to have some coffee ☕

[@jeffclark2725]

Looks like a great score, fixthe bugs and see how it goes,great video

[@johnsmart3587]

Keep it in case Casey needs to borrow it for a recovery. Thanks.

[@bobwebber8521]

Hope you cleaned up the mess under the floor boards. It looks like you could mount a blade in front instead of the forks. Thanks. Look forward to further videos.

[@Cougracer67]

Before it starts, after cranking a bit, hop out and feel the exhaust manifold to find the cold cylinders thus weak injectors or compression.

[@thomasfletcher760]

I agree with Allen , give it a good cleaning and sell ( may be a small company that could use it )

[@jasonmead6760]

Just found your channel and liked it now subscribed

[@jameslindley924]

Think the Pin stays still and the Pdael rotates around the Pin - so its the Pedal Bush that needs heatin up.

[@daleolson3506]

People who let their equipment go to hell like this one,don’t deserve equipment.

[@orenhicks1051]

Pretty nice unit.

[@diggingdave3868]

Its been many moons since that old gal saw a pressure washer....hate to see machines all crusted up like that. Hopefully you gave the top of the transmission etc a blast off before you put the floor back in...🤔👍

[@jamesbigham9036]

I would keep the machine for around the shop since it has a rotator makes it unique and something you could use on small jobs because it is better to work smarter and not harder.

[@jeffnawrocki6375]

I think it looks a lot better 👍🏻👍🏻

[@heavymachinery2843]

Love your Videos 👍👍

[@siriustraveler7083]

I would fix it up give her new filters and oils ( possibly paint and a new seat and keep it for your shop

[@garychaiken808]

Good job 😊

[@justnsaliga8518]

should heel toe method that throttle. bet itll work fine if you heel it

[@chuckh.2227]

Nice safety glasses when welding super clear I had to look really hard to see them

[@askmethings1702]

Nice machine, I need something like that

[@jameslindley924]

We always have at least 1 Powder Extinguisher within arms reach

[@annisranch6950]

Just how rare is that engine? Need one for my 910. Extremely handy size loader. Loved mine till she locked up

[@jenniferwhite6089]

if it was an IT28 we had put them on our loader for feed bale with it all of them had bad transmissions too they are not cheap to buy them too

[@BWYinYang]

Throughly clean-up, inspect, service. Prolly good profit otherwise great for yard.

[@jenniferwhite6089]

i would throw a rubber matt in the cab too after you clean the cad up

[@chrishigdon1070]

rotator used them in the hay seasons

[@rosshall641]

That application on those loaders whereas a tool carrier not the best machine but they have their spot

[@allentisthammer4763]

Clean it up and sell. Looks like its got many more productive hours in it.

[@megamannn8527]

👍thanks for your hard work and sharing your auction loader 👍 🤔maybe if you sell it you can share auction number and location with your community 🎉

[@brettgoodman4360]

Yesterday I was driving down Lamonta road and I see this white and gray F-350 with loader tires in the back on Gardner road, and I think that pickup looks familiar.

[@wbreese9903]

Yes.....I've seen it a couple of times.......looks pretty good.

[@dalepagram4636]

Keep it

[@jameslindley924]

Keep It if it was cheap enough

[@Kranky_Bloke]

I really think you need a shower! The wheel loader got clean and you got filthy. 🤣🤣🤣 Thanks for bringing us along.

[@FishingFrustrationsUK]

new to chanel but i learn from you all

[@64marine]

moly-graphite that pedal after heating maybe?

[@jameslindley924]

Governor just needs Freeing Off. Its built by Mitsubishi under licence from CAT 65HP Great liddle machine IT Stands for Integrated Toolcarrier its a CAT 910 Fitted with Lundberg Loader Frame hence becomes a n IT12 which has the Quick Coupler and a better lift profile/Config than the CAT Loader Frame

[@paulfreeman745]

Just watched the video. Nice old machine. I think it should be a give away. You have to decide though.

[@manueljmat]

Hello from Argentina!!!

[@quintonbartolotta]

Welcome 🇺🇸

[@markroderick3300]

They are actually 3/8 bolts that take 9/16 socket

[@thloveph]

Hello from🇹🇭🇹🇭

[@bradparker-tz2xk]

I'll keep it just in case

[@gjo7870]

keep it keep it

[@pah9134]

You can gift it to me anytime. 😆

[@lassesrum8481]

keep it

[@rosshall641]

That exhilarator is your fuel shut off pull up the shut it off and press it down to start Irene an IT 28 and I was used to the old hanomags from Germany

[@billspinks4357]

If it was easy everyone would be wanting to do it.

[@medic001465]

Your pressure washing technique has activated my OCD complex. AHAHAHAHA

[@frawgsgarage9146]

What de-greaser do you use?

[@quintonbartolotta]

Super clean

[@lorenzoblackie1629]

Have a raffle for it

[@irvineyoung4545]

Robby Laton of Laton auto body uses a product in a blue can called free. Robby claims it`s better than WD 40 and anything else that he`s tried

[@dannageil9610]

HOW ARE YA? ITS BEEN A BIT!

[@paulthompson3877]

you got to love your saying there , (got the cab clean the best i could ) but is that all you can do ? piss poor effort at cleaning .

[@phillip829]

Where is part 2

[@daftDAFdriver]

Sell it and make a few bucks

[@rosshall641]

Your way to Green cowboy

[@barrytaylor3278]

If you heat up the shaft, bolt, nut etc hot enough, you can melt paraffin wax into it. Let the part cool to the touch. Works awesome! It will creep into every crevice and works way better than penetrating oils. Been doing it for years and has never failed to work!!! You can spray with your favorite oil after it loosens up as the wax is compatible with the oils. 😁

[@rosshall641]

Iran banister pipelines it28 they're not a real rubber tire loader I don't know what you call them well I guess better than no loader LOL

[@phillip829]

Pal

[@charlescapolino2975]

sell it and make money like youre suposeed to

[@rosshall641]

Once you get by the smell you got her licked😢

[@isbcornbinder]

fYou might like to finish washing the machine while the floor is out.

[@Jdigger4130]

Very cool! ITs were the quick change from Cat that med sized construction companies loved fer how quick ya swapped! NO ELECTRONICS! I say make er a yard machine!

[@peterselten500]

Keep it