CB1000R Refresh Pt3. Rear End Overhaul

[@martinv3000]

Gotta say your storytelling quality is in another level mate - lighting, sound, transitions, camera work and editing overall. But your "pokey-stickey-outey" type comments is the reason I subscribed 4 years ago. Keep 'em up. Back then I did every mod on my Versys following your example. Including Hurric muffler, that probably pissed some neighbours off. And if I may make a suggestion - seeing you getting something more adventurous and not so pristine and tuning it up would make a great content.

[@AndyManCam]

Great big thanks Martin. So happy the videological faffery is appreciated but also very glad the technical ‚terminology‘ is still ticking the right boxes! 😘 I would utterly love a project bike and as soon as i can make it happen I’ll be all over it!

[@stevegordon2032]

Who’d have thought that watching someone mess on with electrics could be so blooming interesting. I was riveted to it Andy. Great stuff.

[@AndyManCam]

Thanks very much Steve! Glad that even the most boring things can somehow be interesting! 🤓

[@damienpeckham2834]

I was impressed by the new tiny indicators and your home-made bracket.. and then even more so by your bungs. Particularly your patience in making them. Great work sir

[@mc-gl8rx]

Andy's missing sponsor has to be a cable tie manufacturer, top job sir.

[@AndyManCam]

Haha! Brilliant idea. **looks up marketing number for Titon-Hellermann**

[@MotoPeWee]

Whole Honda production team is quietly watching and learning! This is another level and the quality of work is absolutely brilliant! Best channel - high quality videos, nicely edited, your voice makes it very pleasant to watch and the mods you do is absolutely brilliant quality of work! Subscribed and Best of luck!

[@AndyManCam]

Ha! I doubt if they are, but i deeply appreciate the compliment! 😊 I like to make mods on my bike look at least as tidy as factory upgrades, if not tidier!

[@grosbeakmc]

40 some seconds into video and, "We're going to do a DIY job". Pause video, give it a thumbs up, resume video. Great video, Andy, great DIY, and once again I have to express my admiration for this Sugru stuff.

[@AndyManCam]

Haha! brilliant! Thanks so much John! Sugru is truly wonderful stuff! Which reminds me, I must order some more!!

[@eclectarama]

Stumbled upon this gem of a channel completely by chance. Love the production, love the variety of content and love the intelligent use of language. I ejected a gob-full of Kenco's finest in response to the innuendo. Finbarr Saunders would be proud [hmmmph]. Great work and thanks for putting so much effort into making these, Andy. Subscribed!

[@teneretraveller8980]

Excellent work AMC. I tail tidied my old strom to allow easy wheel removal on tour. Electrics are a problem for me being colour blind, but interesting to watch. That do it yourself bung is genius. 30 minutes of my day definitely not wasted. Learnt something good there, ta. Happy travels, oder gut fahrt.

[@AndyManCam]

Cheers TT! Electrics are always a bit of a problem for me too mate, being colour blind as well! I just try to help myself out with logic as much as possible (I've never yet mixed up the brown/red/orange/green cable with the black one!) and also have an electrical tester on hand just to be sure!!

[@ErnestoTavassi]

I am really impressed by the way you make this customisations. This is how to do this works.

[@AndyManCam]

Thanks very much Ernesto 🙏🏻

[@DrummerOnTwoWheels]

As an electrician, this is very satisfying to watch, mate. Nice job. Can’t beat a single swing arm.

[@AndyManCam]

Thank you kindly DOTW! I do love a single sider. Almost as much as i love tidy cables!! 😍

[@bms2250]

Clever trick that with the sugru, at first I wondered what on earth you were doing but the end result was very impressive!

[@AndyManCam]

Cheers Ben! I'll be honest, it was a bit of a leap of faith from me too! I had no real idea if it would work, until it did!

[@ianmills35]

Well done that man. Maximum fafferology for that job. Found it very therapeutic watching someone else spending much time doing mods on bike. Great vid cheers buddy 👍🏍

[@AndyManCam]

Faffery for the win! Glad the tinkering had that effect mate. At times, it was having the opposite effect on my blood pressure! But very happy with the end result.

[@AndyTheBadgerBarton]

Another relaxing diy tinkering film. I am well impressed with your handy work. Your putty filler fix was inspired but the way you made them turn out was just brill. You have far too much patience, perhaps you could loan me some. Excellent job AMC 👍🏻👍🏻😊

[@AndyManCam]

Thanks TB. The patience has come about as a result of the sometimes self destructive OCD tunnel vision!! This was almost 5 days of tinkering from start to finish!! If you look carefully, there are several costume changes!! :D

[@mikejgriffiths]

Looks so much better Andy, good work. Those indicators are almost invisible. Such impressive Sugru work.

[@AndyManCam]

Cheers Mike. They are a couple of little wonders!

[@HalfdeadRider]

As soon as you mentioned the holes I thought "Sugru", but what a way to do it, nice to learn new ways to use it. I did use a small ball of it between my fairing and a metal bracket while waiting on new screws and washers to arrive, done a great job. Love those tiny LED indicators, doubt I could make use of them on my old bike though, would look a little weird with them just on the back of my ZX9r and the front chunky originals.

[@AndyManCam]

Cheers mate. Yeah not every bike is right for something so tiny. Great that there are so many options out there though.

[@HalfdeadRider]

@@AndyManCam Yea there are, and I was looking at the others they have available too. I may change mine at a later date, but for now I put clear lenses on mine to modify it a little. I have a Puig undertray for the rear in the body colour and not sure I can use the originals with it, so may be forced to buy some soon.

[@AndyManCam]

Customisation is a slippery slope! 😆

[@88888888Rocket1]

Thank you for reminding me to never change the tail assembly and blinker system. The biggest point of failure on second hand bikes are electrical modifications. They’re never as good as factory no matter how good of a job you do. I would also say the signals are too close together and may not adequately differentiate left from right. (?) At any rate, you did an amazing job with the modification. 👍

[@AndyManCam]

To be fair, I've only ever had one electrical connection fail on a bike, and that was a factory connection on a 20 year old Yamaha. Hardware failures is another matter, but my connections have always held strong. And the ones on this modification will likely outlast the bike! Plus it would be very easy to revert everything back to stock in an afternoon. He who dares Rodders, he who dares!

[@ewanoffshore]

Nicely done Andy, you’re a genius! You made that look easy. Looks waaaaaay better now 😍👌🏻

[@AndyManCam]

That’s the magic of editing! 😉 Very happy with the look though!

[@robzz9002]

That was a good bit of thinking with the sugru. Absolutely love the stuff, got so many uses. It’s how I made my headlight connections completely waterproof when I ditched the reflector housing on my headlight in favour of a projector setup. Have ridden in biblical rain storms and never had any issues. Great job and gives the tail section a really clean look 👍🏼

[@AndyManCam]

Cheers Robz. Totally agree mate. Seems there’s no limits to where you can use the stuff!

[@jboyers1]

Phenomenal production quality. Amazing work, Andy. I admire your willingness to dig that deep into the wiring. If I tried that I fear the bike would never run again. Bravo on the vids though. I subscribed and I’ll likely be trading my Tenere for the CB.

[@AndyManCam]

Cheers JB! He who dares mate! 😉 It helps to be a lighting tech though. I’m not so afraid of wiring as i was when i first starting biking! Be aware of the terrible paint quality in the CB before you make the change. Obviously the function of the bike is most important, but the paint is coming off of my badly finished engine already.

[@justmejohn773]

Thoroughly enjoyed this video Andy. Impressed with the technical aspects and really interesting to see your thought processes around the alterations. Well done. Ride safe.

[@AndyManCam]

Cheers BR! It was a real adventure on all sides of the camera!

[@ian7666]

Superb job Andy. And an excellent demonstration of the attention to detail in design that makes Honda the highest purveyor of quality in biking. IMHO of course 😬

[@AndyManCam]

Thanks Ian. Sadly i can’t agree. Working on the bike has started to show me that Hondas reputation is worryingly unfounded. Lots of bad paint and dodgy welds all over the bike. Plus the level of parts bin speccing is a deeply lazy move from them. Worst of all, they’re not interested in honoring any Kind of warranty claim for the bad paint.

[@ian7666]

@@AndyManCam Sad news Andy… in the 6 years I had mine (2011 model) the only thing that irked me was the blooming on the exhaust headers. I really shopped around other manufacturers before buying, and found many horribly cheap parts on them, where Honda’s quality was immediately noticeably superior. I really hope your experience isn’t indicative of a change of ethos. Obviously I can’t comment on warranty issues as I never had any issues, so have no idea if that’s always been an issue. Sad news, otherwise.

[@AndyManCam]

I guess ultimately the hope is that the mechanics of the bike will be sound for a very long time to come. Sadly I think the execution of the whole package is very poor. I can see the silver of the wheels through the incredibly thin paint. I won't be buying new again.

[@HuskyRides]

Ok.. these rubber bungs looks absolute OEM. Great job!

[@AndyManCam]

Cheers HR. They were a bit of an adventure, so glad it worked out as hoped.

[@dalehawkes1698]

Looks so much better Andy ,the sugary bug’s are genius mate well done 🎉👍👍👍

[@AndyManCam]

Cheers Dale, I’m really happy with it. Hoping the bungs pass the test of time.

[@scottamolinari]

Nice work.The bit with that putty to fill in the holes under the seat was really cool. I learned something from that. Thanks. The only thing I might have done would have been to repaint the license plate bracket/ holder. Other than that, really cool work. Love the electrical work too. That is my learned profession originally. The only thing I could criticize is the crimping of the contacts with the needle nose pliers. But, I also know the crimping pliers are really expensive. So, no worries there.

[@AndyManCam]

Cheers Scott. I’m totally with you on the crimping. I have some crimping pliers, but they didn’t work with these tiny connectors. I actually went back and soldered them too, to be sure.

[@g.ollieinaus]

What a brilliant job dont know wether we have Shru here in aus but will be lookin out for it well done Andy.

[@AndyManCam]

Thanks Glenn. It’s incredibly useful stuff, i hope you can get some!

[@1050cc]

Chop bustingly complicated. Respect for your research and patience. I know myself that love for a two wheeled companion is strong, my baby gets a rub down now n then but I ain't going to those lengths for her.... call me hard hearted ;-) !!

[@AndyManCam]

Haha! I can totally understand that Alex! I think it’s more for the love of the videos than the 2 wheeled companion! 😂 Nothing hard hearted about avoiding this level of faffery though!

[@padde]

Wow, quite some fumbling required to get these wires routed through half the motorcycle. Great job with the Sugru covers! And awesome video production, as always. Even though I neither have a Honda CB1000R, nor am I interested at all in modifying my motorcycle, I still like to watch your garage videos, because they're just so well-made :D

[@AndyManCam]

Thanks mate! Honored to have kept you captivated! It was quite a job, but thankfully very worth it!

[@itvinasi]

Mighty impressed. Never would thinkg to use sugru like that. Looks awesome

[@AndyManCam]

Thanks mate! I hope that it stays in the hole for a good long time!

[@realcundo]

That Sugru solution is brilliant! What's next, custom earplugs? :D

[@AndyManCam]

Haha! I don’t think i fancy 2 days of cling film and Sugru in my ears! Great idea though!

[@Mike_P646]

You seemed to make that ballache of a job bearable,top job with the sugaru bungs too👌

[@AndyManCam]

Thanks Mike. Im glad it appeared that way. It was still a ballache though! 😆

[@andywozza2079]

Brilliant work fella 👏 love the attention to detail, a man after my own Hart, keep it 👍

[@AndyManCam]

Thank you very much Andy. If cleanliness is next to godliness, then tidy cabling is next to omnipotence! All those years as a lighting tech have paid off!! 😆

[@Jaffa1951]

Very clever stuff with that Sugru, Andy. Love the finished look.

[@AndyManCam]

Cheers Geoff! You and me both mate! Love that clean rear! Shame I'm going to have to stick some panniers back on there to go touring!

[@simonrobinson7536]

You did some work there Andy, it looks cool. Top video

[@AndyManCam]

Cheers Simon! It was a slog, but definitely worth it!

[@chombi84]

Great video Andy, it has definitely tidied up the Honda's rear end 👍

[@AndyManCam]

Thanks mate" I totally agree. The look now is WELL worth the faff that it took to get there!

[@smokeybarr]

Looks great! And those Sugru bungs are a stroke of genius!

[@AndyManCam]

Cheers Smokey! The things you come up with when you’re just desperate to justify your sugru addiction! 😆

[@smokeybarr]

@@AndyManCam 😆

[@normanruthven4354]

Brilliant vlog Andy ,that looks a lot better a good job well done.

[@AndyManCam]

Many thanks indeed Norman!

[@markmundy3435]

Improvise adapt overcome, top work there fella. Thinking outside the box, (had to slip an innuendo in somewhere) you sure know your way around her back end!!

[@AndyManCam]

It needs to be done! I’m getting very familiar with the rear, to be sure!

[@carlton683]

Absolutely fabulous job Andy 💥

[@AndyManCam]

Many thanks indeed Anthony.

[@miketalbot3248]

Slick and resourceful as ever Andy👍

[@AndyManCam]

Cheers Mike!

[@thomasjamesperkins]

Great work Andy, especially on the moulded sugru covers and the Tyco waterproof connector block, pro job!

[@AndyManCam]

Cheers Tom! A job worth doing, and all that!

[@russelllocke7180]

A really nice streamlined tail. Enjoyed watching your tinkering Andy. Never seen that rubber wizardry before. 👍🏍

[@AndyManCam]

Thanks Russell. That stuff is Magic. I was so happy that i finally found a really GOOD use for it! 😁

[@jamessharinglife86]

Nice to meet you again.

[@AndyManCam]

Happy to be here.

[@steveball2307]

Great stuff Andy, looks proper...of course, the front indicators don't match now....looking forward to the installation vid 😉

[@AndyManCam]

Thanks Steve. At the end you can actually see a glimpse of what’s to come 😉. Needless to say, there’s a video on the way!

[@steveball2307]

@@AndyManCam Teach me to watch until the titles have stopped rolling lol. Good to know you're back on the road by the way, always enjoy your rides around the beautiful German countryside.

[@AndyManCam]

Always keep the Easter eggs til the end! First rule of KZbin! Thanks very much Steve, it’s Great To be back on two. 10 weeks was a LONG time!

[@Wats1984]

Enjoy these garage videos! That’s a great trick with the homemade rubber bungs. 👌

[@AndyManCam]

Cheers mate, Glad to hear it! VERY happy with the bungs myself! I think there'll be a bit more Sugru trickery in the future!

[@mickdegreek2007]

Awesome job Andy. Really impressive with the sugru. Well impressed..

[@AndyManCam]

Cheers Mick. I LOVE that stuff! No end of things I'm going to stick that goop on/in/between!

[@cport955]

That ended a lot more complicated than it looked to begin with. Excellent job 👍👍

[@AndyManCam]

Haha! I'm glad there was that element of drama to the video! I knew EXACTLY how complicated it was going to be before I even started! I was TERRIFIED!!

[@itchyscratchy8216]

Little smaller then my fingertip ! That is what ..........! Anyone? 🤣 Nice work work Andy well done !! 🍻

[@AndyManCam]

Haha! Thanks IS! Too many innuendos in this one!! 🤣

[@AyrshireVlogster]

Sugru genius, cracking job well done 👍

[@AndyManCam]

Thanks BB. Always happy to find another use for Sugru!

[@ryoder]

Coming soon to an episode of AndyManCam's Garage: See Andy make a custom-fitted seat for his Honda with 7 liters of Sugru and a cling-film covered bum.

[@AndyManCam]

Hahaha! Brilliant Idea! But I don'T think I fancy having a cling film covered arse for a weekend! :D Maybe I'll have to make a plaster cast of my derriere!

[@larbertman36]

Love the little sound effects!

[@AndyManCam]

I'm so glad somebody noticed them! Mrs Mancam said they were a bit too Sesame Street for her tastes! :D

[@dragon4386]

Massive job! Well executed and a great video as usual!

[@shaneweightman]

Well done Andy , the bungs were well thought out and fitted , looks good buddy ,,, Shane uk 🇬🇧

[@AndyManCam]

Thanks very much Shane. It was an adventure, but very happy with the result!

[@bren106]

"It's always much easier with a flexible tool" said no man ever. Honda seem to be following the Volvo overbuild just for the hell of it strategy. Something I had experience of when changing a starter on a Forza last year.

[@AndyManCam]

Haha! So true! Weird that Honda overengineered that bit, but decided to paint the bike with cheese based paint!

[@scottc3]

Great video and good to see you back! Hope you are well, although if my wife caught me drilling on the kitchen table I'd be in big trouble... 😂 The bike looks great!

[@AndyManCam]

Thanks Scott! Luckily i keep an old tabletop that i stick over the real table! The missus wouldn’t allow such shenanigans otherwise!

[@theevrider]

Loving the DIY series and its tempting me to install a tail tidy on my bike, I just need to locate a heat gun, soldering gear, Sugru and large quantities of heatshrink!

[@brettb939]

That sugary worked really well,good job

[@AndyManCam]

It’s amazing stuff! Thanks!

[@redstu13]

Great Job, I hate that big ugly thing, been wanting to do something similar as there's no afterwards bits out there, you've inspired me

[@AndyManCam]

Thanks! It's certainly a start. Could be yet more spartan, but I need a metalworks shop for that!

[@redstu13]

@@AndyManCam I'm going to look into doing the same with an old tail tidy, and get the side arm bits (if that makes sense) made out of metal tubing, powdercoat it all black

[@johnward3490]

Wow that’s a tidy job those indicators are really impressive

[@AndyManCam]

I agree! Hard to believe that they're so bright AND so legal!

[@deaconstjohn8643]

Great job Andy..!!! Looks so awesome !!!

[@iam_mono1892]

Great video; and even better engineering skills

[@AndyManCam]

Many thanks mate. Multiple levels of faffery in this one! 😁

[@joewood5762]

Very nicely done 👍👍🎉🎉

[@AndyManCam]

Many thanks Joe. I’m very pleased with it! 😊

[@nicoaalderink5924]

Quite the piece of home made engineering. Never heard of Sugru btw. Could come in handy with a lot of projects.

[@AndyManCam]

Cheers Nico. Sugru is unendingly useable! I love it!

[@phil_buckley]

That was quiet an operation going on there Andy, but the patient looks very good after the plastic (I mean Sugru) surgery. Thanks for sharing this helpful video 👍

[@AndyManCam]

The patient is doing very well and the wiring has been thoroughly wet weather tested already! Cheers Phil!

[@phil_buckley]

@@AndyManCamit looks like the last week of rain, hopefully a good spread of lasting sunshine for us now 🤞

[@thecivvie]

Love Sugru. Always have several packs here. I never thought of using it that way

[@AndyManCam]

Me too! Although stocks are a bit low after this job! I'm going to try making tyres next....

[@thecivvie]

@@AndyManCam 😂😂😂 I think Sugru would be happy with the sales

[@AndyManCam]

I certainly don't think they'll complain! In the olden days (before they were bought by massive adhesives company TESA) they probably would have popped up here and joined in with the comments!

[@thecivvie]

@@AndyManCam yeah, I noticed the sparkle has gone from them

[@danielmoya-vidal8902]

What size torque did you use to get the three screws out Andy?

[@AndyManCam]

The screws on the swingarm? They were crosshead screws Daniel. Preferably with a JIS driver. Unless you mean the ones holding the numberplate hanger? Afraid I couldn’t tell you what size, i just went through the bits until one fit!

[@danielmoya-vidal8902]

@@AndyManCam Hi Andy, I am intending to fit the EP Honda CB1000R Neo Sports Cafe Tail Tidy (2021+) and a LV-10 FULL BLACK exhaust on my CB1000R black edition 2022 after fitting the Oxford Street Bar End Mirrors 😁

[@garthmctavish7335]

Looking good 😎👍

[@AndyManCam]

Thanks very much Garth.

[@veryAngryandy]

noticed the avon tyres,are they storm 3d ?,if yes what do you think of them

[@AndyManCam]

They’re Spirit ST‘s Andy. I think they’re absolutely brilliant. I’ve had every bit as much confidence in them as the Michelin Road 5‘s. I’d have them again in a heartbeat.

[@chrisblake8319]

Well done Andy looks good mate safe riding 👍

[@AndyManCam]

Thanks Chris. You too mate.

[@mathewbarker9930]

Not a fan of the look but its not my bike so what does my opinion matter. Loved the foresight and ingenuity though. Thought that Sugaro solution was going to look awful, but turned out great.

[@AndyManCam]

Thanks Matthew. Sugru is impressive stuff when you put the time in!

[@andrewgibbs5135]

Yep, a big improvement. Good job and a really slick edit 😉

[@AndyManCam]

Thanks Andrew. It certainly looks tidier now.

[@ashleylongley623]

Love the little indicators, too cool

[@AndyManCam]

Cheers Ashley. Me too! I Love how they practically disappear when they're not on!

[@critch.]

Nicely done. I wonder if I could use that Sugru stuff to seal and mould around my perished roof ariel on my car.... 🤔

[@JDeezle21]

Tyre review or test? Well after a trackday of course.

[@AndyManCam]

Absolutely yes. I can’t promise the trackday, but I’ll definitely be doing a review on the tyres, once I’ve tried them in as many conditions as possible. Spoiler alert, so far they’re brilliant!

[@albert4266]

What paddock stand are you using?

[@AndyManCam]

It's from a German company called Stein Dinse. It's good, but the spindle for this bike is VERY slim. So it's a bit wobbly! (I 'may' have also bent it already!).

[@stevekirk6399]

I used kellermann on my xsr build, the Sugru Mouldable Glue is new to me will be using that on my next build, thanks for the info

[@mcvincnt]

I'm sure others have said it before and will say it again, but you have a nice looking rear end there Andy.

[@AndyManCam]

Oh, you! Too kind Michael. Oh wait, you mean the bike....

[@jorelplay8738]

OMG! The sugru job îs brilliant!

[@AndyManCam]

Cheers! The sugru was a wild success! I was actually pretty surprised myself that it worked so well!

[@jeffstinchcomb9480]

I love this bike.... thanks for another great video.

[@AndyManCam]

My pleasure Jeff. Cheers for watching.

[@jeffstinchcomb9480]

@@AndyManCam I just bought all the bike I could afford -- the CB500f -- and love it. But I do have to say that your bike is fucking amazing.

[@AndyManCam]

It is a fine machine! I thought about trading it in until i did a few test rides and realised it was the most fun to ride!

[@williamsouthworth5275]

I thought the Number plate was the rear mud guard?

[@AndyManCam]

No, the rear mudguard was the rear mudguard. The number plate was mounted to the rear mudguard. 😜

[@MrBoybergs]

Excellent mod, very nicely done...

[@AndyManCam]

Many thanks!

[@MrBlompod]

How did you lift the back wheel off the ground?

[@AndyManCam]

Single sided paddock stand. Stein Dinse

[@adammills4343]

Got to say Andy , that was a good job on the back end of the Honda , I don’t understand bike manufacturers and why they make the back of some bikes so ugly , anyway good job , bikes looking great mate , looking forward to the next instalment . Cheers.

[@AndyManCam]

Thanks Adam! I understand that manufacturers have to meet certain legal requirements. But it baffles me how Honda made something SO ugly, that also doesn't work!!

[@adammills4343]

@@AndyManCam yep couldn’t agree more Andy.

[@AndyManCam]

I think more and more, manufacturers are just smashing products out, without ever really bothering to test them, or even think about how the consumers might use them. Shame really. You'd imagine thsat things would get better as we charge into the 'future'. Sadly everything seems to be getting worse. Quick manufacture, quicker sale, short useage life, rinse and repeat.

[@adammills4343]

@@AndyManCam yes Andy I’ve worked in the automotive industry in Australia all my life and it’s a shame to say it has become a disposable industry , nothings really built to last anymore - it’s all about the profit these days , as you said it’s a sad situation .

[@AndyManCam]

@@adammills4343 That is sad mate. It’s a real shame. I think in the future I’ll concentrate on getting solidly made old bikes and then making them as good or better than the new ones! I’m a bit invested in this Honda now though. I hate that Honda have left this bad taste in my mouth as i otherwise utterly love the bike! It’s a masterpiece, that was sadly created by the intern, with the bits and bobs left over from a time when Honda was good!

[@CbassShoots]

What rear motorcycle stand are you using?

[@AndyManCam]

It’s from a German brand called Stein Dinse.

[@dsimon9s29]

Thank you for posting. Looks like you did a great job. Couple of quickie questions. How much of the work you did in this video was improvised vs how much did you plan ahead? Anything caught you by surprise? Love the indicator lights. Going to see if I can find them and if they make them for my bike.

[@AndyManCam]

Cheers mate! My pleasure! The bones of the job was all preplanned. I had most of the parts and an idea of where it was all going to go. I had to improvise a bit with the wiring as I didn't know exactly where the number plate lights connected into the bike and the actual mounting of the tail tidy to the mudguard hanger was an 'organic' stage of the proceedings!

[@Lochwood92]

That looks f##kn awesome buddy and all that work paid off.. cant believe how streamlined the backend looks. ⭐⭐⭐⭐⭐ .. I've just taken tail tidy off and gone back to standard.. now I'm thinking I should AMC it. This machine is evolving my friend 👍

[@AndyManCam]

Thanks mate. I’m really happy with it. I thought it would be a shame to lose the low mounted plate, so it seemed obvious to smash the indicators down there at the same time. Good luck with your custom job!

[@Viper6-MotoVlogger]

Wow, those indicators are quite tiny mate. Great job filling that hole 👍

[@AndyManCam]

I know right! Hard to believe they’re legal!

[@DaveDayve]

Great stuff.. What u using to stand the bike up there? Looks like something I'd use for my z900.Tks

[@AndyManCam]

Thanks Dave. It’s from a German company called Stein Dinse. It works, but the spindle is very slim so it’s a bit delicate. No sitting on the bike while it’s on the stand! Could be different for the Z900 though.

[@tdmtam]

Good work on improving the number plate ‘dangle-berry’ and great solution with the Sugru 👍🏻 Not sure about the indicators, would be interested to see it with the stock indicators with just number plate mount vs the Kellerman install. but it’s your bike and your choice, though they are bloody bright for the size. Are you planning on swapping out the front indicators as well?

[@AndyManCam]

Thanks Tam. Yeah I'm sure it would already look better with this mod and the stock flashers. But I thought that as I was in for a penny, may as well go for the pound! I also wanted to make mine look a bit different to all the others!

[@tdmtam]

@@AndyManCam are you going to change the front indicators to match the rears ?

[@Trevor_J_Neville]

Tidy job Andy 👍🏻

[@AndyManCam]

Thanks Trevor!

[@miketalbot3248]

Top job Andy👍

[@AndyManCam]

Many thanks Mike! 🙏🏻

[@backontwowheels9469]

Another great vid, however I think those buffalo girls go round the outside, so you may have been mixing them up with pass the duchy on the left hand side 😂 There was a lot of mention of Hamburg in the podcast thing you did, I was up there for 2019, based in St Pauli and enjoyed my Sunday church visit to the Fishmarkt Ian Back on Two Wheels

[@AndyManCam]

I ALWAYS mix those two up. That's why that Buffalo girl slapped me....

[@hampa07]

Just did mine with the sugru

[@AndyManCam]

Nice! It's magical stuff!

[@ShedTorque46]

Just subscribed Andy. Enjoyed that. I have just bought the cb1000r also. Today I will be doing a black widow full exhaust installation video. 🏴󠁧󠁢󠁷󠁬󠁳󠁿🔧⚙️

[@paulhorton5594]

Your clever Mr well done 👍

[@AndyManCam]

Thanks Paul. I’m just happy it worked!

[@markgoodman5781]

Smashing job - well done.

[@AndyManCam]

Many thanks Mark!

[@guzziryder6566]

Those Euro number plates are ridiculously huge.

[@AndyManCam]

They're still WAY smaller than the ones in the UK! And not yellow either!!

[@andyboyes05]

Great job 👏 as always Andy. 👏

[@AndyManCam]

Thank you so much 👍

[@forthcoming-d8694]

Hey buddy ✌️😎 it’s been a while. Hope you are doing well and Joyful. Happy new year. I have a question pleez ! I want to remove the rear axle on my 2019 model, I removed all bolts, sprocket & center Large bolt with a 19mm hex bit but could not pull the axle out (feels very stiff to the pull) is there a way to do it smoothly other than may be hammer the center axle out (from the Sprocket side) ? Reason or is that I want that Axe shaped brake bracket removed so I can get it powder coated. Thank you much. I called some dealers here in the U.S and stunningly they had No idea how to remove it !!! 🙄

[@AndyManCam]

Hopefully you’ve figured it out by now. Sorry for the delay, but sadly i have no suggestions and the bike is long since gone!

[@snowcrash404]

well done Sir, the back looks much better now, maybe a tinted rear light would make it look even better. 👍♥️

[@AndyManCam]

Thanks SC. That might not be such a bad idea.

[@davydecoene3801]

I like your video's Andy, been a subscriber since the fz1n so I bought one, little sad you got rid of it. I have the impression that the cb1000r is more complicated to work on than the fz1n, or have I got it wrong? Ether way I'm a big fan of content, keep up the good work 👍

[@AndyManCam]

Thanks Davy. Sometimes yes, sometimes no. The single sided swingarm certainly makes some jobs a lot easier. More room for electric under the seat too.