CBD Oil: How To Make Cannabis Oil at Home - Easily!

[@warrengage9536]

We started using our home made cannabis extract about 2 years ago. My mother who is 70 recently had blood tests done and the doctor was proud to tell her that the medication he gave her was lowering her colesterol. She didn't have the heart to tell him she never used the stuff and never filled the prescription. She had been using the cannabis for severe back pain and it treates two issues at the same time. Cannabis all the way baby.

[@EndocaCBD]

Flower power! 💚

[@mirrordoll1728]

cbd or thc i would love to make some

[@peace74fk]

thats good can you please how did you make cannabis oil or from where you bought it ?

[@enimas1]

Could u plz tell the process.

[@ashbell1017]

I was working for a lady a few years back her mother had been told by the hospital that there was nothing they could do for her . cancer in her stomach and spine . three tubes later and you guessed it she's partying at family gatherings now at 73 .... if you know you know ..... peace and ❤️ not £s

[@ek1046]

Man, thank you! No fluff, didnt waste a single moment of time and info is exactly what I needed. Thank you

[@a.y1623]

This man is my hero, love his charisma

[@amirardat1068]

How to make at home then the man steps into science lab

[@EndocaCBD]

Steps inside a science lab to grab a strainer, coffee maker and water distiller ;)

[@MrREDLORD79]

@@EndocaCBD can you vape the oil in that state?

[@mauriciarruda]

Endoca CBD but who has an water distiller at home?

[@syazwanibasri9758]

Hahaha

[@Hater-ip9nc]

Thats what i noticed

[@cheeseburgerkid1329]

A three part stainless steel double boiler works very well too, you reclaim about 75%. Pairing it with an induction stove to prevent sparks is also a good idea. To be certain to purge the solvent I like to place the reduction in an oven safe dish and bake at 230F for 3 hours. When the oil stops producing bubbles it's both purged and decarboxylate.

[@elizabethwinsor-strumpetqueen]

230F !

[@miacrabtree2085]

thanks, this is rocket science for me ❤❤❤. you got it down, man.

[@DK-ii5sc]

This is fantastic. Seriously how can anyone not like this guy. So nice.

[@EndocaCBD]

Glad you enjoyed our video!

[@DamienHorta1289]

i bet that 1 person disliked becaus henry broke the branch at 0:24

[@maxpower712]

Thought the same thing!

[@bosshog4342]

damn near teard up.

[@mezcalineboy]

XD

[@greenbeard4208]

I almost turned off the video

[@zacjohnson8404]

Man that shit triggered me, as a plant grower (veges not cannabis) myself I find that incredibly disrespectful. Probably his own plants though.

[@praphable]

Him: It’s time to cook. Me: Starts RV

[@flowerchild777]

😂😂😂

[@codymackey37]

Lmao

[@physicshort]

now say my name.

[@Priwatez]

Sir, you deserve a medal.

[@louismitchell51]

😂

[@pewwbz9647]

No wonder it's 45 bucks for a 5ml bottle.

[@EndocaCBD]

Well its actually that expensive because all reputable companies that sell CBD extracts actually use a c02 extraction method which is heavy lab machinery

[@pewwbz9647]

@@EndocaCBD oohhhh I see. Still to much.

[@chrisw5742]

@@pewwbz9647 Heavy lab machinery can produe quantity which should bring the price down even MORE.

[@allisonclark2290]

How to sensibly buy LEGAL cbd oil? Because I got a letter saying customs has confiscated my package two times already and I’m pissed.

[@dp_zee]

thanks to the recent law signed by trump, cbd oil should rapidly come down in price.. more affordable access to life saving cbd

[@sarahlanglois5114]

This video is the most to the point video i have watched and ive watched a few. Thank you for keeping it simple and without the use of expensive equipment

[@The-D-Hoyt]

after I have my oil, how do I know the strength? How do I make something 500mg, 750mg, 1000mg, 1500mg etc. etc?

[@watergirl5069]

The best demonstration video yet! Thank you!

[@youtubeaddict5663]

This was so awesome to watch. Ive always been intrigued to know how the process is done and you made it so clear and concise!

[@EndocaCBD]

Great to hear! Thank you!

[@12DAMDO]

what i looked up: "how to turn herb into liquid" what i get: "how to turn weed into liquid" my reaction: "fair enough"

[@rosscobb3234]

Jajajajjaa!

[@taeka1111]

Same route.

[@omaokafor9754]

Dat shit is 50bucks here

[@goodbyebrielle4060]

I think my mom need this, but I can't do nothing because my country still banned this thing. She had a syndrome for 2 years called MDS and the medicine can't stabilize the condition. I don't know what to do anymore :(

[@jessaROXmySOX]

"Look at this beautiful plant" *breaks its neck* "I don't need this one"

[@EndocaCBD]

This video was taken shortly before harvest, so broken now or later, all our plants end up harvested to use for our wonderful oils. No plant dies in vain at Endoca :)

[@jessaROXmySOX]

Endoca CBD Oil I'm just being sarcastic

[@EndocaCBD]

Ah great, we thought so but just wanted to make sure. There are some people that have brought this up, so just wanted to make sure everyone knows we love our plants too much to really hurt them ;)

[@jessaROXmySOX]

Endoca CBD Oil haha 😂 yeah sorry to confuse you. I'm just a brat 😂

[@Rory695]

those plants don't look ready at all

[@lucask960]

this stoner put on a lab coat and sounded smart

[@prophy4736]

@lucas k, in case you didnt see the explosion proof glass shield he pulled down....yeah id say legit...you are the stoner that thought you knew something you didnt lol.

[@DigitalJeremy]

Its an enclosed ventilated hood. Can we agree on 'explosion resistant'?

[@aggabus]

Lucas K ...sound unsmart..

[@Space.Ghost.]

FreedomTaskForce he put on a lab coat to use a coffee pot and a water filter.....

[@kiyoponnn]

@@prophy4736 You idiot he was joking. Who's the stoner now?

[@araradsarkissian2859]

Best KZbin video I've seen for the last few months haha Amazing job Doc! time to cook!

[@nannettebattista3047]

I'm helping myself with Weedborn CBD. I think this is the best medicine.

[@monik8209]

This is one of the best videos I have seen in the matter. Thank you so much for making it available! I wonder though the best way to administer orally. Is it good to mix it with oil and in that case which kind of oil for best results?

[@adriangurung5917]

It's usually mixed with glycerine

[@abdullahiadam3268]

@@adriangurung5917 orally? Isn't coconut oil the preferred choice?

[@adriangurung5917]

@@abdullahiadam3268 Yes but you get a glycerine based product too

[@Leo-eb1wl]

Sacha Inchi oil

[@ivecamperbuild_thomas4084]

What is the best coffee machine to use I have 6 to 8 month to live and I can not have any treatment because it would kill me because it’s a 5/1/2 hour operation

[@bellablue118]

Very good video. Simple process. Great job Henry!

[@joshgunn3849]

if use a vacuum chamber it lowers the boiling point so you can evaporate at much lighter temperature for better quality and taste

[@lizfurrell7953]

Is there still going to be THC in the oil?even tho you didn't initially decarb the buds there is still a heating process, does the release THC?

[@Fleshyfletch]

I think As long as the temp stays below a certain level, the thc doesn't burn off. That's what I've deduced so far. I'm sure this guy could correct me.

[@aliciasalome3131]

Cannabis that is less than 0.3% THC is considered to be industrial hemp and will have a higher concentration of CBD instead. It's not from a recreational or medical marijuana strain. I'm looking into a license for hemp and want to produce my own CBD oil from it.

[@SirLoboBellaco]

decarb your bud before doing this process. Grind spread on foil and put in at 220 for about 50-70 don't allow it to get overly browned. Allow it to cool before moving to the next step.

[@SS-pe9gf]

@@SirLoboBellaco can you decarb like you mentioned, then put the bud into the freezer ? I see some people keep the bud frozen

[@anonanon6669]

Thanks for this - but a what point in his process is the decarboxylization taking place?

[@tylersim4443]

He's using a CBD strain. The point of decarb is to activate THC but he's not using a THC strain. So no point. But I think you would do it at the very beginning of the process for THC and then follow his steps.

[@raamsboxnews]

this was one of the most usefull vids thank

[@EndocaCBD]

It was a pleasure :)

[@heidifouche7187]

i loved it too already ordered the disteller =)

[@pinapplepizza5506]

@@EndocaCBD Just don't break the branch again please haha

[@matthewlavergne5610]

I used Weedborn CBD products and healed without any problems.

[@Owa24]

Where are they have they a online and do postal

[@ludwiggraupe7571]

Salute to Rick Simpson 💚🕉️

[@addz]

Great job. Simple. Loving the water distiller option. Ty!

[@EndocaCBD]

As simple as we could make it haha. Thanks!

[@silvertongue3003]

Mind me asking what the reason for using ice cold ethanol instead of just room temperature or even slightly above, I would have thought a slightly warmer ethanol would help leach the oils out much better and quicker? I’m not a pro so please excuse me if this is a stupid question.. 😷

[@anthonymelchiorre7366]

Amazing how much can be done with this God giving Medicine/plant!!!!

[@jimchance5006]

Shut the fuck up stoner

[@naghateabhi]

what if ethanol still remains , is it any problem if consumed .

[@hoodwa1534]

Use vodka no problem high alcohol of course

[@edwardissa]

no it's not a problem just a much higher feeling but if high ethanol you could possibly kill your patent if they smoke on it all day

[@johnhutchinson5398]

Abhishek N not really. Ethanol is just home made moonshine. Ever clear alcohol works great too. It’s a 180 percent alcohol also which makes it better to use.

[@motherlandmade393]

@@hoodwa1534 can u use any vodka

[@crusherlord]

Is iso safe to use in a water distiller, or would it go boom. ?? 😎😎

[@johndilts2504]

Great video. I use a French press to separate the moonshine and flower

[@EndocaCBD]

Interesting technique!

[@IMSiegfried]

Very enlightening! Much appreciated. And honestly, it's one of the best sales pitch's for your product or any product I've ever seen! Nothing wrong with that, Mr. CEO. :)

[@EndocaCBD]

Thanks Angela! But we're pretty bad at pitching if we're telling you how to make it at home! Haha but we believe in free medicine if thats what people need and cant access the product otherwise

[@IMSiegfried]

That's true,@@EndocaCBD. But many people who watch will choose the convenience and safety of buying a CBD product made at a facility like Endoca CBD over home made.

[@davidanderson8469]

Lighten up Siegfried.

[@blazjarc7538]

Where to buy the vevor distiller seal that is alcohol resistant? The original is made of sylicone and doesnt work so good. Thank you!

[@slowedhits2506]

God bless that man's soul 😢😭

[@Radzinkx]

Yeahhhh, Science B*tch!

[@anthonyabbruzzese3495]

Hello, great video btw. Can I buy any water distiller? I just buy the water distiller and follow your instructions? What about the decarboxylation? I thought this process was important and achieved with high temperatures?

[@Samu20111105]

I was going to ask the same question. decarboxylation is not mentioned in the video and to my understanding is a key to convert THC A into THC. I've seen 110° c would be the right temperature for about 1hr ?.

[@davidguthrie4724]

i have a 4 chamber,bronze welded at the bathing chambers with an inducted hypovolumetric chamber with attachable sym arms (upto 6 attas) nnd still get booked for drunk driving

[@MaloModo101]

One thing everyone seems to skip is how to effectively transfer your end product (RSO or what have you..) from bowl/pan/etc to something a little more viable for dosing etc (e.g. syringe). Obviously the end product is super concentrated and I find there is a fair amount that gets wasted as it "sticks" to surfaces etc. Anyone have an idea on how to do this? I am thinking some sort of syringe that is heat resistance that you could evaporate the ethanol off in and then you would be left with your concentrate all ready to go in the syringe.

[@EndocaCBD]

Good question, there would be some that would remain in the container at the end that you would have to use from there, but using a syringe it would be relatively easy to suck up majority of the end result for easier dosing

[@1964orange]

you can pull it up in a syringe. And what is stuck to the bowl itself, if you add coconut fat you can use it in that format or scrape it on to a smoking paper, assuming you smoke it at some point.

[@aarde7036]

I have a very small bottlesystem with a pull-up syringe, I got it from a vet when my cat needed medication. It works perfectly. I keep filling it fromout a bigger bottle. When it's done yes there is some 'waste' sticking to the inside of the bottles and the filling syringe but I use that for making tea. just pour or pull-up small amounts of hot-not-boiling water in until the bottle is clean, mix with fat milk or some butter and eventually some other tea.

[@dannywalker9288]

Lick it out of the bowl…problem solved.

[@zoomepl]

@@EndocaCBDSo what’s the dosage for the above quantity in the video? How much high can you get out?

[@mr.m7412]

Hello great video. You mentioned about using a pot or rice cooker that should be done outside. Is it safe to use a distiller indoors with an exhaust fan? What are the hazards to watch out for with a distiller? Thank you

[@easyflow420galactus9]

The tip of sparking with ethonal was great for personal safety

[@EndocaCBD]

Safety first!

[@qiqa2433]

That flex at the end; 98% crystals

[@mbrasel8]

If I use this method, is there still THC in the oil? I am interested in using the oil for anxiety but don't want the psychotropic effects

[@peterpoole5074]

You should buy hemp. In Switzerland there is a product called Sweed which is only CBD And tastes like the good stuff in the states. but if you’re in the states you should be buying hemp or going to a dispensary.

[@mbrasel8]

@@peterpoole5074 thank you! I'll look for hemp

[@songsalon7868]

@@peterpoole5074 Do they ship out?

[@EndocaCBD]

We use hemp in this extraction and also in our CBD products, therefore very low THC :)

[@vickistroud423]

You need all the cannabinoids they work together a good part of the hemp on the market is just plain garbage go for full fledged cannabis.

[@user-zr5ny8gj6p]

Hi whiche degrés alchole to use? 70% or 40 or 100% please?

[@Mickey-im3bg]

I enjoyed this video very much, you seem very professional in what you do. What is the best way to make oil for a vaporizer? Do you have a video for that? Thank you.

[@jacqw1515]

most consumers interested in utilzing CDB side

[@joinercharle]

Did you get a answer?

[@c4spinn]

Uh....this IS for vaporizing. This is the very thing you are inquiring about. What did you think they gonna do drink the finished oil?

[@calhorning6292]

NIGHTFOX n

[@kiwibird8441]

@@c4spinn you can take a drop of this under the tongue bud

[@DepudyDong420]

This is just what we need in our recommended

[@EndocaCBD]

Great to hear!

[@ashbell1017]

is denatured ethenol the one I'm looking for ?? asking for a friend 😁

[@humanseeksjustice8830]

Thank you. My fam inherited (or got from environmental factors, and toxins in our food and slum landlord's mold in home) various diseases and disorders. Our hospitals are generally too expensive and most of the doctors are residents that dont' have empathy and work 12 hr shifts so are naturally tired. We plan to use the legally allowed amount of plants to extract our own oil. Thank you for the video!!

[@EndocaCBD]

No problem, sharing is caring! Especially in such conditions as you've described.. Stronger together. :)

[@cbdchill8214]

The 'Water Filter' is actually an 'Air Still' for anyone interested

[@zzz8596]

What is an air still , now I'm not sure to buy a water distiller or not in case it's wrong , thank u

[@Crentonius]

Great vid, exactly what I needed when I searched!

[@ELDee420]

I would love to work in a lab like that. ♡ That place is beautiful.

[@djalbo]

This dude Intro had him looking like he was Steve Irwin the crocodile hunter or some sh*t.

[@EndocaCBD]

Thanks for the compliment? haha

[@djalbo]

Endoca CBD it’s a good thing man 😂😂

[@Alpaslann]

R.IP. Steve. He was a legend

[@N0N4M30]

Was thinking the same thing 😂

[@Inky1877]

How is the final product injested is there another process to dilute it ?

[@darringreen648]

Can i use Ever clear as my ethanol ?

[@EndocaCBD]

Ever clear contains some sugars and other additives, like many alcoholic drinks so ideally you would want something as pure as possible for extraction.

[@aux1z11]

@@EndocaCBD Use what kind ? Where would you buy it ?

[@johnt5342]

Very informative video. I like the idea of recapturing the alcohol with the distiller... but doesn't the distiller heat at a temperature that would damage the turpenes, and other desirable materials? I'd read that you should remove the alcohol at as low a temperature as possible. In researching the distillers, their temperature shutoff is quite high. Thanks.

[@jamieanan-ua5994]

Most turpenes vaporize at the same temp as the THC around 347F. Water distills at 212F so the turpenes should be safe. And since the coffe maker's burner doesnt get above 212 you wont have to worry about losing anything good when youre burning off the remaining alcohol😉

[@debbieannhylton]

Can you use a pot

[@efsaturn]

Are there any fume or other sparking dangers using the distiller.

[@littleroxie315]

I use a small crockpot on warm nothing over 120* until all alcohol is gone use syringe to remove from pot

[@OmarBaassiri-wd6wc]

How did you achieve decarboxylation at these levels of heat? I thought you needed 110 degrees celcius

[@candicecan1634]

Thanks for the video :) why can one only stir for 3 minutes? Is it not beneficial to let it seep in the alcohol for a longer time? And what concentration does the ethanol you use have?

[@user-tr2dh4xx6u]

Looks like 60% it said in the video. Also if you let it seep you get resin and other stuff extracted as well which probably won't matter if you are eating it but it will matter if you vape it

[@ML-qj7eb]

In the first 90 seconds you get almost 80 to 90% of cannabinoids, if you let it sit more time, as alcohol loses its polarity while getting closer to ambient temperature it will extract other stuff like chlorophyll that will make your extraction dark and bitter.

[@eifionphillips3004]

Do you have to wait for exactly 24 hrs to remove ethanol?

[@lilnugofweed3425]

I would assume you're done when it doesn't spark like he mentioned

[@EndocaCBD]

Exactly, it depends on your extract so once its thick and doesn't spark your good to go

[@motherlandmade393]

@@EndocaCBD can u use any vodka

[@EndocaCBD]

@@motherlandmade393 Ideally it would be a pure ethanol solution rather than simple vodka.

[@qudrethaciyev1902]

Ok. How to use this CBD oil

[@mapsanddiagrams4732]

...featuring the new IKEA flat-pack laboratory

[@AnneBasset]

This CBD Oil is really interesting. Where can I buy CBD?

[@DianeCS2]

what's the benefits of this plant?

[@AnneBasset]

Thanks a lot was a great article enjoyed the read.

[@amyhoang9140]

Why don't you use gin or volka be used instead of ethanol? The first two are also alcohol.

[@ronanlough3868]

Amy Hoang because ethanol is a much purer stronger alcohol, yo can use grain alcohol too but never ipa

[@jeanp3317]

Where can one buy the cannabis????

[@williamcaine2462]

Can I use my essential oil distillation set up which has a graham condenser and separator ?

[@NLawal-fc3ip]

Thank You for Making this video, it was daunting to me how I was going to be able to Afford to continuously spend Money on A Oil that I desperately need to keep pain at bay from my sle lupus and the horrid depression that comes with it! Im grateful CBD oil can help instead of taking pain pills and psych meds my whole life! Ty once again :)

[@EndocaCBD]

Thats amazing Naji! We feel honoured to be able to you the means necessary to make your own extracts, let us know how you go!

[@AldousHuxley7]

John Bergman reverses lupus. Check out his videos^^^

[@darrenedwards9082]

Deffo I think the same Hun xx

[@victoriazaldivar215]

Hi! love your video! do you need to decarb the herb? or freeze it before yo do the process?

[@littleroxie315]

Yes you do

[@7even871]

0:33 you actually don’t need to dry it out to make an extract. Live resin is a very common thing days. Just flash frozen right off the stock and then you know the rest.

[@ARedMagicMarker]

"Don't worry. It's okay. I'm in a labcoat." :D

[@EndocaCBD]

Exactly 😆

[@historyhunter5215]

Look at this gorgeous plant...... SNAP!!!! There went at least a half....

[@EndocaCBD]

We don't just use our plants in our extracts, we also keep some leaves for smoothies, some seeds for our cereal, so no plant is ever wasted! :)

[@johnbob4420]

The best cannabis company in the world!!:)) !I love what you do!

[@rudraagnihotri725]

Why do you choose ethanol against any other solvents? what are the advantage of Ethanol why not Spirit/isopropyl etc. ?

[@EndocaCBD]

Because ethanol is actually the safest, and its for human consumption. You need to use food grade materials. While isopropyl is LESS dangerous than for example methanol but it is still not for human consumption

[@6ftS]

I can buy the following ethanol cheaply. Is this fine to use or does the acetate make it unfit for use to make the oil extract? Ethanol 95E5 (Ethyl alcohol of 99.99% purity. denatured with 5% (volume) ethyl acetate). Can be used for Biofires.

[@zacharbison8763]

"Denatured alcohol, is ethanol that has additives to make it poisonous, bad tasting, foul smelling or nauseating, to discourage recreational consumption" - use Everclear or other high proof drinking alcohol

[@airbomzairbomz3356]

ethanol is not only safe it extracts much better than iso..iso is really not the right thing to use,damages the liver in tiny amounts

[@theconspiracyfactualist.144]

@@EndocaCBD Hi, the water distiller which you used, is it just a standard water distillery or is it a certain model for the making of essential oils?

[@animusicplaceholder4857]

Can you use this oil to make blunts? Asking for a friend.

[@realBatman-89]

Oil into blunts? Lord.

[@EndocaCBD]

We don't suggest using extract like this in anything to be smoked :)

[@heidifouche7187]

we use fruit alcohol so even if you were to leave anything in it will not harm you (but we do check if any is left in ), and to leave it longer in the alcohol you get the advantage of chlorophyllin the oil which is a major bonus we been on the oil now almost five years and could drop all our chemical medicine

[@EndocaCBD]

Great, glad you have found a system that works for you!

[@heidifouche7187]

no thank you for sharing your story with us we are buying one of the water distillers this coming week wat a great idea we did use and wasted a lot of alcohol so far thank you again , will still keep my plant in the alcohol round three hours to get the chlorophyll out but this distiller is going to be a great bonus thanks again ! @@EndocaCBD

[@goal7779]

Hi Henry, thanks for the video. Was the heat in this whole process enough to decarb the oil or do you still need to decarb after the coffee machine?

[@josephmarshall5896]

The heat from the distiller should de-carb the greens, I hear 150 for 30 mins does the job of de carbing, or if your worried do it in your oven 160 for 35 mins then follow his process, dont see why it wouldn't work same ways.

[@goal7779]

@@josephmarshall5896 Thanx Joseph

[@josephmarshall5896]

@@goal7779 no probs bro your welcome, t.b.h I wouldn't even use this method I'd do an oil infusion, crockpot style, the results are amazingly good..👍🏻 also so easy.

[@goal7779]

@@josephmarshall5896 Yes agreed, but then the RSO is super concentrated compared to the infused oil.

[@josephmarshall5896]

@@goal7779 true say its pure concentrate, it's good for dabbing etc & all other methods of using it however you still have many people using it in a carrier of some description. It's also a question of how much herb you have handy to use on your infusion, a mate of mine used the solid coco oil couple days back and that infusion is truly destructive..mine will be made up tommorow. Il let you know how I get on as il be using both methods..👍🏻

[@juliemontoya1630]

Thank you for the great video! Questions: in the video it states I can use the distilled ethanol over and over. How many times is the reuse of the distilled ethanol recommended? Also, how do I know when the ethanol/cannabis mixture is at 80% inside the distiller? I have done this twice and I accidentally allowed the distiller to go to long resulting in slightly burning the oil or in burning off almost 100% of the alcohol. Thanks in advance!

[@EndocaCBD]

Around 3 or 4 times should be fine, and the only way to check is to carefully open the distiller, and check on the process

[@alekjwrgnwekfgn]

@@EndocaCBD you gotta be the most charismatic dude in a lab coat- definitely on KZbin. Q: is CBD oil produced this way de-carbed?

[@gautamsamy736]

#Endoca - Ethanol is not available in India even in the Chemical market - is there any other alternate i can use to make this oil. I need this for my Stage 4 Liver Cancer metastatic to GB & lymph nodes. I did order one from ENDOCA few days ago which arrived yesterday but it says 3% Cannabinoid and is very thin liquid. Please help.

[@PazLeBon]

+Gautam Samy percentages are not important. what is important is the amount of cbd mg you are ingesting. you can make it in various ways or buy it legally online many places. altho for stage 4 you want thc with it

[@EndocaCBD]

+Gautam Samy our 3% CBD oil contains 300mg of CBD, our customers report that for conditions like yours would need to take a much higher strength CBD product. Many people choose our 20% CBD/CBDa which contains 2000mg CBD this is a full spectrum extract with over 400 active molecules.

[@marcwire9332]

so what would it cost per month to treat this with your product????

[@lschl7584]

Marc wire Marc, It's less if you grow it yourself. Street value here in CA for a lb is about 3,000.00. If you have a cancer or other major illness you will need to take a gram per day through out the day (rice grain size) using the remainder an hour before bed. (6 weeks) 1 lb makes about (6) 10 ml syringes which is what you will need for a full recovery. Also depends if you are getting a high CBD cannabis, recommended is minimum 20% CBD. If you never taken cannabis before always start with 1/2 a gram through out the day, maybe 1/2 grain size or a grain size every night for the 1st week & work your way up to a gram. Skin issues or skin cancer, just put a dab on area and but a bandaid on it. As per Rick Simpson says should be gone within 4-7 days. Looks like their prices here are good. I've paid up to 400.00 for (1 )10 ml syringe here in San Diego, CA. Hope this helped :) Blessings with your healing journey........

[@marcwire9332]

Lillian many thanks for that post!! My healing Journey is taking an amazing adventure, you are correct in what you say other than the time, it can take longer depending on the cancer, yes I have kicked mine using this compound, hence the post about price. Look out for a company in the future called Guardian, time to bring healing to the people at a price they can afford!

[@batman1169]

The Canadian Rick Simpson did this years ago with a fan and rice cooker in a field

[@EndocaCBD]

And if it wasn't for him, half the world would have no idea about the amazing benefits of cannabis and its medicinal qualities. He was a game changer for the industry, no doubt

[@batman1169]

@@EndocaCBD You should give credit to him then! Good video. Hopefully the new medicine in the world will be available to all.

[@0623kaboom]

coffee pot works better ... and overnight soak of the organics in the alcohol ... works even better ... and yeah use a good drinking alcohol in place of ethanol and you get that flavour as well and dont have as much crap to worry about as with ethanol ...

[@geetamaharaj6345]

Hi I watch your mixture is it works if u rubs it for pain

[@DNYLNY]

I love how he rented a lab for the video but basically used household items to make the oil.

[@EndocaCBD]

The lab wasn't rented, its ours, but yep household items so people can make it at home! If we showed you our method, no one would be able to reproduce it without a heavy investment haha

[@user-zh2xu5ko7r]

@@EndocaCBD Thank you the video is awesome

[@AndeHart]

If he used gadgets we never heard of and cannot afford then how would it be practical for the average person?

[@dalepoulette]

and ps. Rick Simpson knows the real way of making cannabis oil

[@313boss]

@Ducky1521 how long? and can you smike it in vape after?

[@manicmurph]

@@313boss i put it on my vape. You can mix it with terpenes or they have wax liquidizer.

[@trybal007]

@@jonog5632 English please.

[@BananaMana69]

I think RSO and this oil are different. RSO is for eating and connot be smoked while this is smokeable.

[@yarkmates3409]

Silo 101 why can’t RSO be smoked , I occasionally put a bit at the top of my splif , I wouldn’t advise vaping it tho

[@2inthepink1inthestink11]

what is the "other stuff" you don't want if you leave it longer than 3 minutes? I leaver it for 1 hour never had trouble??

[@sagittariusman9307]

😂 I love how he just snaps a sativa, giving zero fux

[@0623kaboom]

it was probably part of the to be harvested section so broken or not it doesnt matter it will be shrunk down even more soon enough

[@ernestlandmesser7300]

Lol this guy felt smart just then typing the word sativa lol yall stop

[@Haruglory131]

Lol he said come I'll show you as he casually brushes through thick marijuana forestry and I said yes yes sir right behind you sir

[@BETIUX762]

Hi thank you so so so much for sharing this. Could you please help me on one step. If i dont have a water destilation machine, how do i separate ethanol using regular kitchen tools. Anyone? Thanks

[@glendalynnejanacek7558]

Why can't you just take the cannabis leaves and flower and soak it in oil for about 5 weeks , Strain it , Get some more cannabis leaves & flowers soak it for another 5 weeks in the previous oil that you just used . Will that not work? I Can't see why not , you can do this with comfrey leaves and once you're finished you will have nice strong soothing oil for cuts bruises broken bones excetera excetera. I'm really curious to see if this would work

[@EndocaCBD]

It would work, but you will have a lot more plant material inside so the taste would be stronger. Also, it would be less concentrated, but many people make extracts this way

[@glendalynnejanacek7558]

O ok thanks for your reply 🙂

[@glendalynnejanacek7558]

@@EndocaCBD thankyou for your reply 🙂

[@wendy54321]

I think you are on to something I think this would be alot easier ,if not a better way. The same way you make alot of essential oils with a carrier oil.

[@ecnalmann956]

My question is, where do you find a coffee maker that stays on for 24 hours?

[@LuisaPlantierMartins]

I agree! Every coffeemaker I know, turns off automatically after about 20 minutes.

[@bradbentley1078]

Use a adjustable temp griddle or hot plate

[@Mike1979]

He doesn't say anything about decarboxilation? Do I need to decarb before using a water distiller?

[@cyranojohnson3962]

so why did this come out grainy???

[@nimeso]

Did not sift/strain enough? To much heat?

[@GaryMcKinnonUFO]

Liked and subbed.

[@EndocaCBD]

Awesome Gary!

[@GarethJames]

Landed here to Gary, did you try it?

[@sasuke5088]

this is wonderful. I've only been making my own extracts for 7 months. I never thought of using a water distiller. I thought I'd just have to drop a few hundred on a rotovap.

[@Bennytet]

Hi Henry. Thank you for the great information! My question refers to the light the herb is grown with. Does natural sunlight improve the effectiveness of the healing oil or does artificial light also produce a high grade oil?

[@EndocaCBD]

Both work fine as long as your plants are well looked after and have the right breeding :)

[@astilen5647]

Does the alcohol decarb the CBD-A into CBD? (EDIT: No it does not). Cannabis used to make oil, tinctures as well as other edible cannabis products requires decarboxylation. The product you made is CBD-A and not CBD, unless you think the 24hrs on the coffee machine provided enough heat to decarb it, but no. At least mention decarboxylation. If the cannabis is heated too much, we run the risk of vaporizing and losing some of the important cannabinoids, terpenes and flavonoids which have medicinal properties. At the same time we want remove the CO2 as quickly and effectively as possible.

[@fifteenbyfive]

It'll decarboxylate at room temperature in open air. This natural aging process (e.g. "curing") is rapidly accelerated by heating. They have both raw hemp extract (CBD + CBDa) or not (CBD only) available. As was mentioned repeatedly in the video the point of the 24 hrs on the coffee burner is not to decarboxylate the extract it's to remove the solvent.

[@astilen5647]

Im not saying not to remove the solvent over 24hrs on a coffee burner, thats important. Im saying that patients watching this video will be making CBDA which wont help them medically and they may depend on it. Heres whats missing : Put the herb in the oven for 25 minutes at 220 degrees Fahrenheit, now the CBDA has become CBD and you are ready to mix it with alcohol in a bowl and carry on as shown in the video. The title of the video is CBD oil not CBDA oil. In the rare case that a patient actually needs CBDA, they should consider consuming the herb raw instead of spending money and time making oil. Of course, respect to endoca for helping people make their own medicine.

[@fifteenbyfive]

24 hours at 160 degF is useless, but 20 minutes at 220 degF is all it takes! Alrighty then glad you've got the curve all figured out due to your many years of experience. Maybe you should upload a video showcasing your CBD oil along with some lab verified proof of results? If not, then where's the randomized, double blind, placebo controlled studies on raw hemp oil vs cooked hemp oil? I"m all eyeballs.

[@astilen5647]

Yes 160F is very suboptimal, you are freeing so little CBD that it not medical or economical. And room temperature you mentioned earlier made me laugh. Endoca products are of course top quality CBD as they use CO2 extraction with pressured air, its just their demonstration in this video that is incomplete.

[@fifteenbyfive]

160 degrees is also speculation. A carafe burner might be 200+ degrees. Room temperature shouldn't make you laugh when that's how buds are cured. And wild hemp has time to age a lot longer than the freshly harvested buds grown in the "How To" guides you've probably read where this 220 degrees in the oven optimal business makes more sense. One can grow buds faster, fatter and more potent than what they're going to get outdoors which is subject to the weather. So if our case is the optimal, there's all kinds of ways to make the case here. That's not the point of the video obviously. How much CBDa is in this final product is speculation at best. Again unless you have evidence showing otherwise which you haven't provided yet so I assume you don't.

[@spencerknight1730]

the coffee heater to finish is brilliant!

[@DavesInHisGarage]

arrrgggghhhhh that branch thooo

[@EndocaCBD]

Dont worry, this video was shortly before harvesting our crop, so it all got used. No plant is broken in vain at Endoca :) all is used for our oils

[@dtroystopper2]

Look at how many plants he has... that branch is meaningless.

[@XboxIssues]

@@todd3452 Lmfao bro no it wouldn't. He straight snapped that shit and he's on the brink of harvest

[@8ftbed]

XboxIssues Neck snapping like a Major Payne graduate. 😂

[@XboxIssues]

@@8ftbed Lmaoo 😂

[@poerik]

;-) Big Thksss

[@jonathandavis1638]

Do you take out the filter from the water distiller to do this.

[@podcastwithaman9857]

I cant trust u if u wear uspa

[@darthdaddy6983]

How to end up in a Canadian prison for up to 15 years . Thats how we legalized it ! Lol

[@chantalchoctawkreyol6540]

😂😂😂😂😂😂😂😂

[@nightmaster23]

NOICE!!!!! so food grade ethanol works just as well as concentrated lab grade?

[@macflow9661]

The thumbnail looks like ggg

[@jaumarelockhart1514]

Can you smoke the weed

[@EndocaCBD]

Many people do dry it after and smoke it however we don't recommend it

[@jaumarelockhart1514]

Endoca CBD thanks for the knowledge

[@billspoon8874]

Put the excess weed in brownies

[@heidifouche7187]

if you do the decarboxylation you will not get the high , but it works brilliant for pain my son had a back opperation that did not work and he suffered a lot with pain now his joined a gym and does body building that combats back pain too

[@crispybottoms]

Is the oil decarbed when its in the distiller? If not, how is it being decarbed?