CBR 1000RR CHAIN REPLACEMENT

Had an opportunity to work on a 2014 HONDA CBR 1000RR SP!😊 Showing some tips on how to replace chain and some other small stuff on this bad boy!
Follow me on Instagram: (WAS CHANGED TO sups_garage)
Things I did on this video were
- Chain Replacement
- Front and rear sprockets
- Oil Change
- Phone Mount
(I DO NOT OWN COPY RIGHTS TO THE MUSIC)

[@DavidM2002]

I would not have installed that front sprocket using the transmission to stop things from turning. Remove it with the old chain in place and reinstall it with the new chain on the bike and stuff a rag between the chain and rear sprocket to stop it from turning. No chance of damaging the transmission that way.

[@alwaysalphaofficial]

Nice video. I recently picked up a 2014 CBR1000RR SP in Pennsylvania with VERY similar mods minus the braided lines and with an aftermarket seat/ engine protectors. Same gold levers, red shifter boot, even the same rear spools. Very odd…🤔🤔

[@49watersleeps]

Me to bruh no fairings on her though, last of the no rider aids era. The 2014 sp is just special. Every want get ‘em out together lmk I’m in ebensburg and Lancaster every other week

[@Treizez34]

The SC58 SP model is still an amazing bike. I had the chance to ride one and I also owned a non-sp 2016 matte black version for 3 years. Besides the HP deficit, the CBR is an amazing bike to ride and makes it so easy to go fast.

[@ryanvtec3885]

a little locktite blue wont hurt, especially on the front sprocket.

[@SUPSGARAGE]

I agree with you bro

[@Shift1dwn5up]

Good video but torque specs for everything would have been helpful.

[@GoodBoy-qf5ui]

You didn't explain that the rotor is aluminum and steel. Gold part is aluminum.

[@RepsolRacingTeam]

Nice video, how much it cost you DIY chain sproket set? At how much kilometer you are changing. Please share all video about working on our Fireblade our selves. Really appreciate your effort here

[@SUPSGARAGE]

I believe it was around $200 to $250 for the kit if I'm remembering correctly bro

[@jasonbosworth8549]

Chain is wayyyyy too taught, when the rider sits on the bike, the chain will be over-tight! Amateur!

[@ayowser01]

it will affect his suspension movement

[@wileyamendola4814]

Nice video bro

[@SUPSGARAGE]

Thank you!

[@friendlyneighborhoodbikeme8535]

Don't flip the video feed, I was watching and was like how the fuck is the chain on the right side of the bike

[@SUPSGARAGE]

Man I just notice that I did that lol Good eye

[@senolsahines]

Please help, the km information and fuel values ​​of my honda 1000 rr engine are constantly coming and going, do you have any information on what should I do?? 1000RR SC59

[@SUPSGARAGE]

you they keep blinking? and what exactly do you mean the km information keeps coming on?

[@MrReniks]

Did you noticed more vibrations or sound going with a front sprocket without a rubber damper?

[@SUPSGARAGE]

No not at all, you did?

[@MrReniks]

@@SUPSGARAGE going to swap them same as you, and coming back with a feedback.

[@SUPSGARAGE]

@@MrReniks let me know because now I'm curious lol

[@wheelyfbaby]

Quick question,. I have a 2016 Blade,. How many links is that chain? 120 or 114 ?

[@SUPSGARAGE]

to be honest brother it's to far back to tell you 😞

[@wheelyfbaby]

@@SUPSGARAGE it’s okay man from what I’ve read it’s a 116 lol

[@GoodBoy-qf5ui]

And forgot to mention the torque specs

[@jasonbosworth8549]

Incorrect move putting the bike in gear and beating the transmission up wt the impact. Simply remove the front sprock bolt first, while it’s still under tension wt the chain. Loctite & torque front sprock bolt as well as rear sprocket nuts! Amateur, lolZ

[@jmservin1]

Where are you located?

[@SUPSGARAGE]

located in Mesquite Texas brother

[@jasonbosworth8549]

Doesn’t take off lower fairing to change oil? Gets caustic oil all over my nice plastic painted fairings? No thanks. Amateur.

[@ayowser01]

I'd reason that Honda designed the fairings this way so as to not remove the plastics. He just messed up and dripped oil on it.