Let 'er RiP! ARRMA Infraction Mega 4x4 Brushless Conversion Bash

Well that was fun. It's much faster now.
Want to get some of the on-car shots I got? The Insta360 Go 2 is a great and easy to use solution and it is 10% off now till Dec 15th!
Buy an Insta360 Go 2: bit.ly/3pehjyP
Lens Guard: amzn.to/3reVguI
Extra Pivot Stands: amzn.to/3rj99b5
Here are the parts I used. You can buy them at your local shop or using the affiliate links:
ARRMA Infraction 4x4 Mega: bit.ly/3nAPosj
Spektrum 100a ESC: bit.ly/3I8GcEZ
Spektrum 3900kv: bit.ly/3d4gjrw
ARRMA 50T Spur Gear: bit.ly/3D8CGqn
ARRMA 20T Pinion Gear: bit.ly/3d4lRST
-Center Driveshaft support and bearing: bit.ly/31qmHan
-Aluminum motor mount plate: bit.ly/3Eql7U4
#insta360 #arrmainfraction #insta360go2
Click to subscribe ⇨ bit.ly/Sub-CCxRC
WAYS YOU CAN SUPPORT THE CHANNEL:
1. Leave a tip via Paypal ⇨ paypal.me/ccxrc
2. The channel is supported by affiliate links that don't cost you any extra money, but does give me a percentage of the purchase price for directing traffic their way if you use the following links.
Shop at Horizon Hobby: bit.ly/HH-CCxRC
Shop at Amain: bit.ly/Amain-CCxRC
Shop at Amazon: amzn.to/3s1BdNW
3. You can also support by buying CCxRC Shirts and Merch ⇨ teespring.com/stores/ccxrc​
----------------------------------
Connect with CCxRC
----------------------------------
Facebook ⇨ / ccxrc​
Instagram ⇨ / ​
Twitter ⇨ / ccxrc​
----------------------------------------------------------
Best KZbin Account Management: Tube Buddy ⇨ bit.ly/YT_TubeB...
DISCLOSURE
----------------------------------------------
The product shown in this video may have been sent to me for review. Regardless, I do not paid by the companies to make the videos, but many of the links contained in the description are affiliate links and I may benefit from a small commission if you purchase something using the links. It is my duty to you to provide you with my honest and unbiased opinion about the products that appear on this channel to help you make informed decisions. This channel makes money through views, and if you don't trust the content, it doesn't do either of us any good. If you plan on making a purchase and want to support the channel using the links, I thank you in advance. I look forward to making more great reviews for you.

[@Gridnack]

I was hearing a clicking/rubbing noise with mine on 3s (running a hobbywing 4000kv motor). I discovered the driveshaft was able to flex and grind/rub against the servo mount, installed a typhon 3s center driveshaft bearing and the noise went away.

[@CCxRC]

Yes. I have ordered that and the aluminum motor plate. My mistake that I didn’t order them to start

[@numbnnuts1]

Mine eats the tires. GET SPAIRS and Get the drive shaft bearing. Its like $5 on horizon

[@RcNickster709]

WAHOOO!!! Yeah baby .. Let er rip is right!!!!. Great run bud .. Oh man.. Start stocking tires for this thing lmao.. Woah and the 360 really does allow for some cool shots!!

[@mikeshoup7122]

Brushless conversion Straight up rips on 3s Worth every penny to upgrade

[@thejeepinrealtor5742]

Still haven’t put my brushless system in. I HAVE however run a full 3s pack through it. 😂 Was smoking at the end and the stench of burnt motor covered the yard but she’s still going! 😂 If I had a cheap 3s capable low turn brushless motor I’d try that out. It was fun on 3s

[@thejeepinrealtor5742]

I’ve played with mine stock on 2s last couple days. Man it’s hella fun as it is and a fantastic value. I’m about to put the MAX10 SCT 3200kv combo in mine. Using your recommended pinion and spur. We’ll see! I’ve been having fun messing around in the back driveway and yard and haven’t found the desire to swap it all out 😂

[@KurtsRCs]

It has the power you just need a little more room and the mulch gods saved you haha

[@ervinmedina9014]

Great install of the Brushless system Tony!! I was surprised that this rig didn't have the the metal motor mount included with it🤔. I saw in the comments that you have ordered it. It drifts on demand now!! This is a great option if you can't afford the Felony!! Great job again, stay safe and bash on from Colorado!!!

[@CCxRC]

I honestly didn’t realize it had the plastic mount either. Kept hearing brushless ready and thought it was going to be a drop in. But more parts are needed

[@chefjack33]

That slo mo slide is FTW

[@CCxRC]

Thanks mate. This car slides so well

[@gillian9178]

You can here the drive shaft flexing & rubbing, get the center support bearing on.

[@CCxRC]

Yup. Ordered one and a metal motor mount. Put them in my description links

[@jeffmackovitch9987]

Nice driveway run except for that Boulder Hit. I want that camera and now I want the car too! Let’s see it in a big open parking lot. (Or inside a mall it’s Christmas shopping season?)

[@NCmountainsYouTubeChannel]

O yeah “ looking forward too much more 👌

[@rogueFactor]

man i really dig the Third Eye you got goin'. 😁

[@andrewsouthern3517]

It finally drives like a real infraction 😂

[@raymonde.tanneratomic-rc9370]

I be getting my mega in few days, can't what

[@ShenRC]

That's insane! That hat cam looks like it would work good or the fishing videos!

[@CCxRC]

The 30 minute battery life might be a problem for that

[@ShenRC]

@@CCxRC bummer...could it be run off a power bank like a gopro?

[@CCxRC]

No. Not without the included charge case

[@lexsee8267]

@@ShenRC actually.... the GO 2 USB POWER MOUNT enable continuous use of the camera without the charging case

[@ShenRC]

@@lexsee8267 so it can run continuously on a power bank portable supply?

[@RCRitterFPV]

Your driveway has the perfect amount of *ehem* petina, for this rig... good stuff

[@CCxRC]

😂 it’s pretty crappy. Don’t look forward to replacing it

[@RCRitterFPV]

@@CCxRC paying for driveways is painful. Our last place ate 1k of gravel every couple years.

[@CCxRC]

Ouch! That makes sense as the gravel embeds. Our asphalt is basically broken chunks of asphalt locked together like a puzzle. Curious if my snow pusher is going to lift pieces out.

[@RCRitterFPV]

@@CCxRC ​ @CCxRC Tax deductible as business expense, need proper surface for high speed testing, hahah all kidding aside, lots of roads like that and that rig handles it perfectly, annoying when you get a 1:10 road car and it can barely roll over the driveway or street in front of your house. Growing up in New England... that is every bit of asphalt I've ever known.

[@slzbuildz]

Nice speed Tony! I'm curious about the phone setup on your transmitter.

[@CCxRC]

It’s just a camera clamp from Amazon with an iPhone holder on it

[@slzbuildz]

@@CCxRC sweet thanks Tony.

[@pgboost]

Great run.🔥💪👍

[@scaleworksRC]

What I'm finding so far is: 30mph ok, but kinda slow 40mph better.. but needs more, pucker factor increases. fast for under 1/18 scale 50mph something will break if you crash, plenty fast for most RCs 60mph now you're speed running 70+mph you got money to burn (yes, there are a couple budget builds you can potentially hit 100mph but I mean generally)

[@Tommy018]

Does it need a fan?

[@GreatLakesRC]

Man that's so much better! As others have said, check your driveshaft 😉

[@CCxRC]

Already ordered after comment on the install. Totally forgot to order it and the metal motor mount

[@optionlessprime]

Were you ever able to get a true top speed reading for this setup?

[@donniemarks94]

Would love to use those wheels and tires on my senton without having to trim the body

[@nicklashokanson1515]

I may have heard wrong but, I thought I heard you say you live in Michigan! I live In Jackson, Michigan!! If you don't mind me asking what city are you in Michigan??

[@CCxRC]

I’m near Grand Rapids.

[@fredstoychest]

I was curious what cell phone mount you are using.

[@CCxRC]

They don’t have the one I bought, but basically look up camera clamps on Amazon amzn.to/3DjEDAh

[@petersboukis67]

What app do you use for the mph tests on your phone ?

[@CCxRC]

The Sky rc GNSS PA app. It works with their analyzer device I put in the car

[@fergsrcenjoyinglife352]

What phone holder are you using on your controller

[@CCxRC]

It’s just a camera clamp with an iPhone holder on it

[@fergsrcenjoyinglife352]

@@CCxRC thanks

[@CCxRC]

They don’t have the one I bought, but basically look up camera clamps on Amazon amzn.to/3DjEDAh

[@Demellos_World]

heyo