How to Make a Shift Boot in Leather (Part One)-Car upholstery

✅Any donation to support the channel will be much appreciated!
Paypal : [e-mail]
✅Get our courses at: www.cechaflo.com
---------------------------------------------------------------------------------
This video part one shows a way to approach a car shift boot in leather. The challenge is to do it in four parts doing plain closing sewings and french seams on top view for the four seams.
If we start out from zero it is necessary to first make a pattern. As always thin stationery cardboard is useful for this purpose. In case of not getting this paper board, another hard paper would be also useful.
In next video part two, I will show how to close the missing seam by using a hand sewing technique with two thin straight needles.
I hope you find in this video some inspiration!
Cesar

[@Cechaflo]

PART TWO: kzbin.info/www/bejne/aaLJgouvrtmNY7s

[@iangibbons7942]

Another perfectly timed video as I am about to tackle this very project in the near future. Thanks again!

[@Cechaflo]

I am glad the video is useful and have found some inspiration!

[@DexterXxX]

Great video, thanks to you videos i have started my journey with upholstery and I made my seat covers for my car. not great but people are impressed considering it was first time, also made gear gaiter but not french stich Thank you very much

[@Cechaflo]

Dear Dexter, I am so glad to hear these videos are useful and inspirational!!! In two days more we will post part 2 to show how to close the open seams by handsewing with two needles. In these sunvisor's videos I show some of this technique:kzbin.info/www/bejne/aZakdYdmeq98Z5I (min twelve:10) kzbin.info/www/bejne/hH68nXadZq12apo (min four:32)

[@user-os9ig2wh4n]

أنا من الشرق الأوسط في الصحراء الربع الخالي مذهل ماتقوم يا معلم

[@GregsGarage]

I need to make one of these. Thanks for the video Cesar!

[@Cechaflo]

Hi Greg, I am so glad to hear from you! This video is part one. In next video part two I will show how to handsew the open seams with two thin needles in order to get the four french seams. It could be done in an easier way with just one needle. The distance from hole to hole should be of 3 mm to get a tight plain stitch. In these sunvisor's videos I show some of this handsewing technique:kzbin.info/www/bejne/aZakdYdmeq98Z5I (min twelve:10) kzbin.info/www/bejne/hH68nXadZq12apo (min four:32)

[@fishka13super]

Thank you for Your experience and knowledge.

[@Cechaflo]

You are welcome anytime! Thanks so much for watching the video!

[@valtergaspar1889]

ok waiting for the next video👏👏👏

[@Cechaflo]

Next video part two is ready. We will post it in 2 to 3 days more. Pretty interesting 'cause it shows a basic handsewing technique all the upholsterers should know.

[@mic1658]

i`ve learned so much from your video`s, thank you so much. great channel,

[@Cechaflo]

I am glad the videos are useful! Don't miss video part two where I will show a hand sewing tehcnique to close the open seams.

[@AlxHdz-qq5xg]

Felicitaciones es uno de los vídeos que más me gusta de ud le agradezco que comparta 👍

[@Cechaflo]

¡Muchas gracias por apreciar este video!

[@julietapisserie9471]

Bravo et merci 🙏 vivement la prochaine vidéo ! 😘

[@Cechaflo]

Thanks for kind comment! In two days more we will post part 2 to show how to close the open seams by handsewing with two needles. In these sunvisor's videos I show some of this technique:kzbin.info/www/bejne/aZakdYdmeq98Z5I (min twelve:10) kzbin.info/www/bejne/hH68nXadZq12apo (min four:32)

[@diegoso3434]

Buenas amigos gracias por todos los videos son excelentes!!

[@Cechaflo]

¡Muchas gracias por apreciar este video! En un momento mas, hoy dia publicaremos la parte dos de este video.

[@sawkeeper182]

Best work

[@mohammadabdullah5540]

Thanks 👍☺️ bro 😁😀

[@jameswagner3685]

Thank you, Cechaflo for adding this link to buy your upholstery courses! I hope you will add this link to ALL of your KZbin videos.

[@Cechaflo]

I really appreciate your kind remarks!

[@roztamblyn169]

what are the measurements of the triangles?

[@johnwoolfrey5093]

Thank You

[@Cechaflo]

You are welcome!

[@juliodanielalbarracin3668]

..very very good excellent..👍✌️🇦🇷

[@Cechaflo]

I really appreciate your kind comment!

[@johanramosmachaca2848]

Muy bien explicado

[@Cechaflo]

No se pierda el siguiente video parte 2 donde muestro como coser a mano la parte abierta. Además mostraré un método mas simple de hacer estos forros/capuchas cónicas para la palanca de cambio. Muchas gracias por ver el video!

[@javierramos2800]

Bien cechaflo

[@Cechaflo]

¡Muchas gracias por apreciar esta artesanía! En el siguiente video parte 2 se muestra como cerrar la parte abierta cosiendo a mano y que parezca hecho con máquina de coser.

[@marinalasmanovica3436]

Благодарю за ваше видео! 😍😍😍 У Вас золотые руки! 👍👍👍👍👍Очень интересный приём с проколоми на шве, для дальнейшей работы. Очень интересно👍, беру себе на заметку. Хочу себе такую швейную машину.😋 У меня кожи много, но простая машина, не всегда её шьёт🤔. Ещё раз благодарю! Подписана! Жду следущий мастер класс!❤

[@Cechaflo]

I really appreciate your kind comment! To do upholstery is advisable a double or triple transport sewing machine (walking foot). There are differenttrade marks, such as Juki, Pfaff, Consew, Brother, Singer, Adler, etc. In a moment more we will post part 2 of this video.

[@matiasdefilipi]

Muchas gracias! Todo muy claro. Aguardamos con ansiedad el segundo video. Saludos desde Argentina.

[@Cechaflo]

¡Muchas gracias por apreciar este video! Esta es la parte 2 :kzbin.info/www/bejne/aaLJgouvrtmNY7s&lc=UgykN8Ou3XV_CmIQg7V4AaABAg ¡Un cordial saludo desde Mexico!

[@matiasdefilipi]

@@Cechaflo estoy haciendo una cofias respetando el diseño original gracias a tus consejos. Gracias!

[@Cechaflo]

@@matiasdefilipi Muestro otro método práctico en parte 3:kzbin.info/www/bejne/aYvEd4awj61soLM

[@matiasdefilipi]

@@Cechaflo Si si. Ese me sirvió. Muy bueno. Gracias . Estoy muy atento a tus videos. Estoy haciendo de a poco las buracas en cuero... y aprendo mucho viendo estos videos.

[@Cechaflo]

@@matiasdefilipi ¡Me da mucho gusto que estos videos sean útiles!

[@XxBUDDYCALLxX]

awesome video! i have a baby lock bl9, what foot should I use to get the top stitching so close like that?

[@Cechaflo]

Any standard flat foot could be useful.

[@Soueu-uk6lx]

👏👏👏👏👏

[@TerjeNormann]

Hi! Your videos are awesome. Thanks for charing. Have you ever made a video about how to make a leather parade cover boot for convertibles?

[@Cechaflo]

I have never made one. But, I am capable of doing it.

[@TerjeNormann]

@@Cechaflo Do you have some video out here that shows some of the stitching you recomend for edging and joining tree parts toghether? It will become one mid section and two side /"wing" sections that will point forward on the sides. I'm into making a template now, but not sure what would be the best looking and strongest seams...

[@NaracoorteHigh]

Great instruction. Can you tell me what is the thread size that you use?

[@Cechaflo]

I used a 92 polyester thread. www.thethreadexchange.com/miva/merchant.mvc?Screen=CTGY&Category_Code=polyester-thread-092 This is part 2:kzbin.info/www/bejne/aaLJgouvrtmNY7s Another related video:kzbin.info/www/bejne/aYvEd4awj61soLM

[@Albanez39]

How did you measure the previous boot? Or the base and shift knob to make the 4 pieces of leather for this project?

[@Cechaflo]

Shift boots are of different size for each car trademark. The one of the video is only a sample on how a shift boot could be approached. The simplest way to make a boot would be to unsew and copy the old boot to the new vinyl or leather. In case of not having a mold, then we should start from zero measuring the square or rectangular base. Next the height to the hand lever close to the knob. By having these measures I would start making up my molds in paper or plastic.

[@lakshmanaraokoneti8284]

Plz show in bus gear rod boot with jeep type

[@chibiusatsukino2893]

How did u put it together at the end??

[@Cechaflo]

kzbin.info/www/bejne/aaLJgouvrtmNY7s

[@dilawarhassan3622]

Nice work car name this boat cover

[@Cechaflo]

No specific car. It is just a sample.

[@user-lk4fn8be5o]

Very nice but I see that the hole of the needle is a little narrow in my opinion and where the rest of the end is

[@Cechaflo]

This video is part one. In next video part two, I will show how to hand sew the seams following the little holes.

[@chippy3197]

Do you have a template you could share?? If not, what is the measurement of each triangle? Thanks in advance.

[@Cechaflo]

The lateral sides are 18 cm long and the base side is 12 cm. Take into account the vertical sides are slightly rounded getting close to the bottom. These are related videos: kzbin.info/www/bejne/aaLJgouvrtmNY7s kzbin.info/www/bejne/aYvEd4awj61soLM

[@nikkibarth8627]

What is the fabric used in this video called?

[@Cechaflo]

It is not fabric. It is natural leather.

[@user-hh4te3ik3b]

👍👏👏👏

[@Cechaflo]

Thanks for kind remarks!

[@lakshmanaraokoneti8284]

Plz show in massure ments in boot

[@mirzajabbar2133]

Please show the measurements

[@montaser680]

Hi how are you -Is going to be a video sequel

[@Cechaflo]

Yes, in two days more we will post part 2 to show how to close the open seams by handsewing with two needles. In these sunvisor's videos I show some of this technique:kzbin.info/www/bejne/aZakdYdmeq98Z5I (min twelve:10) kzbin.info/www/bejne/hH68nXadZq12apo (min four:32)

[@user-mn1ws3uk6g]

👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼✂️✂️

[@Cechaflo]

Thanks so much for kind remarks! In two days more we will post video part 2 to show how to close the open seams by handsewing with two needles. In these sunvisor's videos I show some of this technique:kzbin.info/www/bejne/aZakdYdmeq98Z5I (min twelve:10) kzbin.info/www/bejne/hH68nXadZq12apo (min four:32)

[@jaygunna3503]

How much do you charge for something like that?

[@Cechaflo]

I am not really updated with prices. I am mostly devoted to just post videos.

[@jaygunna3503]

@@Cechaflo I know it's got to cost a pretty penny. Your very skilled and skills like that don't come cheap lol. Love your videos my friend keep em coming

[@janierescosta4263]

Como vc fecho ele?

[@Cechaflo]

In two days more we will post part 2 to show how to close the open seams by handsewing with two needles. In these sunvisor's videos I show some of this technique:kzbin.info/www/bejne/aZakdYdmeq98Z5I (min twelve:10) kzbin.info/www/bejne/hH68nXadZq12apo (min four:32)

[@user-td3qb6nh5v]

Не понятно, как в итоге чехол замкнуть ( сшить )???

[@Cechaflo]

This video is part one of two. In next video I will show how to close the open seams by handsewing. Thanks for watching the videos!

[@user-ix8po7pd8n]

В ручную, по наколам от иголки.

[@Cechaflo]

In two days more we will post part 2 to show how to close the open seams by handsewing with two needles. In these sunvisor's videos I show some of this technique:kzbin.info/www/bejne/aZakdYdmeq98Z5I (min twelve:10) kzbin.info/www/bejne/hH68nXadZq12apo (min four:32)

[@Daddakh]

اللايك 🌻🌼☘🌷🌺🌹❤❤

[@Cechaflo]

Thanks for kind remarks!

[@idrisagabekov8620]

Цирк а не мастерство. Зачем столько непонятных телодвижений ? Такими темпами вы салон за год не успеете зашить .

[@patrickperry6945]

Don’t like this method. Too many seams and the wrong kind imo. Don’t get me wrong. This guy is spectacular. It’s just that I’ve done this. Without all the hand sewing and only one seam.

[@Cechaflo]

Thanks for your commentary! I personally do not like this design. I also prefer one seam and the use of a lace to tighten up the head of the cone. A car trimmer on the Hog Ring Forum posted a picture with this shift boot design and asked for opinions on how to approach it similar. That is why it inspired me to do it alike the shown picture.

[@lucybailey34]

@@Cechaflo have you got a video or instructions on how to do this method?

[@romanlars4037]

Too much effort. I replaced mine with a new one for $8.00usd.

[@Cechaflo]

Most of these videos are educational and aimed to people who is studying upholstery.

[@latrahhadli7627]

Algadid2023