How to Skive Wide Leather Pieces - (Part 4) Leather Upholstery

[@Cechaflo]

Related videos: kzbin.info/www/bejne/kHTCcnStbaZ4jZI kzbin.info/www/bejne/i6uQqoRrgNJ_aMU kzbin.info/www/bejne/nKnCiah_fciCa5I kzbin.info/www/bejne/aXfYqX-beMqmiZo

[@MPapadatou]

If you watch all 4 parts becomes a great seminar for skiving machine. Very nice work. Thank you so much for sharing your knowledge.

[@mohammedegyptian2527]

Bravo, eres un artesano experto en la industria de productos de cuero.

[@pequodexpress]

I have found that for panel skiving with inexpensive Chinese presser feet it is important to file down the toe and heel a little bit.

[@MrFranz155]

I am from Poland but I would love to come to practice the art of upholstery with a master like you

[@curtainsup9]

thanks for the video...love seeing tools in use...I bought a small skive that I have to pull through...that is all I needed

[@Cechaflo]

A leather skiving machine is a very useful tool for shoemakers, leather artisans, including car upholsterers.

[@guilleantunez5091]

La realidad es q solo los bordes es necesario rebajar porque si no pierde la magia el cuero, ya q su grosor y durabilidad son su principal característica, es mas bien solo el espacio por donde pasa el pie prensatela con la costura, en mi caso lo hago manual con un cutter bien afilado, esta maquina puede ser util para multiplicar la producción pero asi y todo, es un trabajo muy tecnico artesanal, por lo tanto requiere conocimiento y paciencia.

[@michaelschneider-]

+1. .. Luv the gifted artistry! .. Dang, that’s good.

[@cesartapiz3103]

Buen video 👌 maestro yo rebajó así la piel para los botones que van forrados de piel

[@fimziking8696]

Love your skill's 👍

[@farhadfadayi7389]

I had needed a video like this. thanks so much.

[@TapiceriaOrihuela]

Buenos dias, tengo que forrar unos botones con una piel de 1,3 mm y necesitaría rebajarla manualmente ya que no tengo maquina para ello. Podrías darme algún consejo para hacerlo ? Gracias

[@Cechaflo]

Estimado colega, Las pieles de curtido vegetal se pueden rebajar manualmente con mucha facilidad. Las de tapicería son mas difíciles. De hecho para forrar los botones con la forradora se necesita adelgazar la piel como de 0.8 mm Una solución sería recurrir a un fabricante de zapatos de la localidad ya que muchos de ellos tienen estas máquina rebajadoras. LLevar las tiras cortadas para que hagan el servicio. Otra solución en la que no se necesita rebajar, sería hacer a mano los botones. kzbin.info/www/bejne/epXMn6qeipKIrrMsi=T4tGtHwvHPxIDBxs&t=383 Otra solución es con suerte conseguir pieles que estan reabajadas a menos dl milímetro. Ya estan listas, no necesariamente de res. Hay pieles pequeñas de cabra, cerdo, etc. Espero que esta información se de ayuda.

[@manuelorihuela9405]

Muchas gracias

[@pequodexpress]

Some curved presser feet are relatively flat, making more contact with the leather, and some are slanted, making less contact with the leather. My machine came only with the slanted curved feet. I think the flatter curved feet might be better for general purpose skiving, especially panel skiving.

[@Cechaflo]

Actually, presser feet are slightly angled to minimize friction against the dragging barrel.

[@pequodexpress]

@@Cechaflo True. There are some that have an even greater angle. I've ordered the more standard feet with a slight angle.

[@thamwong4016]

@pequodexpress how wide is your presser foot you are using for panel skiving. I have no idea what flatter curved feet looks like. I never succeed doing panel skiving, wondering what caused such trouble--foot, feeder etc. Still finding out.

[@Cechaflo]

@@thamwong4016 kzbin.info/www/bejne/h4fcinZpYr-Vq8ksi=kV775v14Pe1S3uLz&t=166 The slanted presser foot I am using for panle skiving is 25 mm wide. A slanted curved presser foot avoids friction rubbing.

[@Jacobs-je6pq]

Bonsoir monsieur merci beaucoup pour explication de la pareuse j'espère que je pourrai acheter monsieur si vous permettez envoyer les mesures ou le modèle que j'ai vue dans cette vidéo porte feuille et monnaie merci patron

[@koulaimvrou8571]

can you tell me why it injures my skin from above and tears it? which is due;

[@Cechaflo]

It mostly happens when the bell knife is not well sharpened.

[@jholden0]

Does your skiver have two motors?

[@Cechaflo]

It only has one motor.

[@autotailor1710]

Greetings! There was no video for a long time, I already started to worry

[@Cechaflo]

Dear colleague, I am so glad for your kind comment! Fortunately, the cameraman (my son) is on vacation now.

[@haruntokdemir]

Makine işler, El övünür. Makine de şaheser. Elleriniz de marifetli. Elleriniz dert görmesin. 🥀🥀🥀🌹🌹🌹🌺🌺🌺🍁🍁🍁 🇹🇷Türkiye'den saygıler.

[@Cechaflo]

I really appreciate all your kind remarks! Greetings from Mexico!

[@haruntokdemir]

@@Cechaflo ❤️

[@weter141276]

Please tell me the size of the presser foot for wide areas of skin (video 3:02)

[@Cechaflo]

It is the medium size presser foot 1 ¼" of an inch. It touches the upper part of the barrel.

[@weter141276]

@@Cechaflo Thank you! It is 30mm or 35 mm?

[@Cechaflo]

@@weter141276 32 mm approx.

[@weter141276]

​@@Cechaflo Thank you!

[@thamwong4016]

@@Cechaflo have you ever tried using presser wider than 32 mm. I am currently using 40 mm and I had a hard time as leather will always be torn and damaged. I think the shorter the presser the easier for panel skiving

[@autoarmoury3449]

How are you able to engage the feed roller independently of the Bell knife?

[@Cechaflo]

This clutch mechanism comes with the Fortuna machine I have. The feed roller moves independently from the bell knife. When I turn on the machine the bell knife runs. The feed roller only moves fast or slow if I press the pedal to engage the clutch mechanism.

[@autoarmoury3449]

Fantastic, thank you for the reply I am a self taught auto upholster in Australia and your videos have always taught me so much! And I am so grateful 😊

[@keatman]

So, if I'm understanding right, you stopped the roller from mechanically spinning and manually pulled the leather over it?

[@Cechaflo]

Sorry, I did not see this comment until now. I suppose you are referring to the picture. Yes. after stopping the feed roller I pulled the upper and lower leather strips.

[@mhiratsuka5010]

Obrigada 😊

[@aleksandrportnoy1677]

Великолепно!

[@ЛЕХАТЫБЫЛПРАВ]

Здоровья учитель

[@douglasf.santos823]

Muito bom gostei um super like 🇧🇷

[@pequodexpress]

Do you sharpen the knife with the stone while simultaneously skiving? I started doing this and began getting better results, especially when going down to 0.5mm on more delicate leathers.

[@Cechaflo]

In my case, I don't do that. I do the sharpening with the grinding stone. Then I move backwards the stone and start deburring the inside edge of bell knife.

[@pequodexpress]

@@Cechaflo I have had my machine for only a short period of time and was doing a exactly what you have written. Then, following the advice of a Japanese master skiver, I started sharpening while skiving and got better results. This is with a Chinese knife installed. Maybe with a better knife this won't be as necessary.

[@Cechaflo]

@@pequodexpress I now understand.

[@prakashdurgani6873]

As u sual simply superb missed working under you really regret

[@GregsGarage]

I like the mods!

[@Cechaflo]

It is so nice to hear from you!

[@fishka13super]

I have" fortune " shoots waves I don't know what to do.

[@Cechaflo]

As mentioned in the video the most important tip is the 'bell knife' should be well sharpened as a razor blade. Otherwise causes waves or marks. The 'grindstone' should be new if possible. The edge of the 'grindstone' should be vertically even to do the angled sharpening of bell knife blade. The 'grindstone' should be a soft one to avoid burning the bell knife edge. It is an error the use hard grindstones. The correct grindstones make itself powder if the pressure against bell knife edge is too hard...this is a kind of protection.

[@fishka13super]

@@Cechaflo thanks,I changed the knife to a new blue color,sharpened a knife,better.Before that, the bell knife had a beating (I checked with a marker.) I'll sharpen it again, try it...

[@andreygaychukov]

👍👍👍👍👍👍

[@lilianneterrelachesys273]

The ""music"" >

[@amboss594]

Der Kommentar hat keine semantische Bedeutung, er unterstützt nur das Video und den Autor des Kanals.

[@ozgurmetin1976]

👍👏👏👏🙏🙏🙏

[@GenXDesigns]

Show off……:)