How To Make A Spiral Christmas Tree

[@timschull9707]

Finally a fellow iowaian making dust on KZbin. Hey from Waterloo

[@cedarriverwoodworking]

Glad to have you neighbor.

[@mdrlando]

@@timschull9707 I’m still trying to figure out how much I need in wood and how to get the dimensions because you go so fast it’s hard for me to get that my best to work with and get the best idea but obviously this is a little complicated for me when I’m just learning how to

[@powellsd75]

@@mdrlando 4 fence Pickets and a 10' 2 x4. I would just pause video and replay as you take notes.

[@RichyN25]

Hey Andy, I'm here in North East Texas and just wanted to thank you for the build instructions, took a shot at it and the 54° star today too and after about 3.5hrs and some miter saw calibration (didn't realized I was half a degree out of wack and it definitely showed up in my star) I had it done, used a 6ft aluminum Empire ruler for my circular saw to make the taper cuts. You've been a big inspiration for me as a beginner woodworker!

[@ryanmazza1233]

I think both have their places, the potential for adding lights or making small additional decorations is pretty awesome. If you have a family of woodworkers it would be a super cool idea to make one of these and have everyone make their own personal ornament for it!

[@cedarriverwoodworking]

I love that idea.

[@dgperforms1]

I love this, and ANY other x,as project!

[@bobs7975]

I Love both builds! The plain tree is beautiful in its rustic style. The red and white really pops with the colors of the season. Great job.

[@cedarriverwoodworking]

Thank you very much I appreciate the comments and your support.

[@deandrafountain1335]

I saw the star video first love these projects

[@cedarriverwoodworking]

I'm glad that you enjoyed the projects and I appreciate your support.

[@judywhitney9487]

i saw the tree tutorial first and then the stars...i appreciate your teaching and demonstration styles...thank you!

[@cedarriverwoodworking]

I appreciate the feedback and the support. I'm trying to make easy to follow videos with safety tips to help newer woodworkers grow in their hobby.

[@mrmyblessednest1722]

I love the way you did the diagonals!! Using the straight edge vs pre cutting the angles is genius! I love both trees!! Thanks for sharing Andy! Off to watch the star video!

[@cedarriverwoodworking]

I hope you like that one too. I like this method better because it's more forgiving.

[@corinnewatts6683]

I must admit when I saw the thumbnail i was expecting a tabletop ornament. So much potential here. Without the base, in smaller homes this could be hung on the wall, or in an entry or high traffic area in a larger home, even outside. Great design. Thank you for sharing.

[@cedarriverwoodworking]

I'm glad it was a surprise. I appreciate the support

[@JamieHathron]

Unpainted

[@dmartinpiepenbrok]

Just bought your plans and intend to build a number of trees to line our long driveway for the upcoming Christmas. I might experiment with paint colors of lighter and darker greens to see if I can create an 'natural' looking effect. Thank you for the simple build design that will definitely complement our country holiday decor.

[@cedarriverwoodworking]

I'm glad that you enjoy all of it. I really appreciate the support.

[@murphyrulez]

Just made both the tree and the star! Everyone that sees them fall in love! Thanks for the excellent video!!!

[@cedarriverwoodworking]

That's great! I'm glad you enjoyed the project.

[@rogerfillmer4020]

My wife likes the painted one the best and so do I so that's the one I'll be building! Really appreciate the video. It's well presented and easy to follow!!

[@cedarriverwoodworking]

I appreciate the support and the feedback. I am particularly fond of the painted star.

[@JJ-oq7tm]

I am going to make both. But, the plain tree is my fav. Nice work, clear explanation too. Thanks for this vid.

[@cedarriverwoodworking]

I'm glad you liked it. I appreciate the support.

[@mulesk8nner799]

These are so much fun to make. I cut multiple cross bars at one time to make about 8 trees in one day. Thanks for sharing your videos.

[@cedarriverwoodworking]

I love the idea of batching it out. They are fast to make and easy to sell. Keep it up.

[@tmsmith4393]

Actually like the painted tree matching the holidays. Enjoyed! Now I’ll be watching your star video.

[@cedarriverwoodworking]

Thank you. I appreciate the support. I'm particularly fond of the painted star.

[@peggycasey2265]

I don’t know which tree I like best they are both beautiful!!

[@cedarriverwoodworking]

I'm glad you enjoy them.

[@lisaschlichter32]

You do a nice job editing your videos, cutting out the ponderous repetition makes all the difference.😀

[@cedarriverwoodworking]

Thank you. I still ramble and I'm working on making that better too. I appreciate the support.

[@jipplejapple3347]

The tree video popped up first and I'm definitely going to be making this

[@cedarriverwoodworking]

You'll have to let me know how it turns out.

[@scottbrewer423]

This tree video was seen first. I like the painted tree just a little bit more for the contrast. Going to the Star video now. Great video thanks.

[@cedarriverwoodworking]

Thank you very much. I am particularly proud of the painted star.

[@markeveritt6328]

I like the look of both. Thank you for showing your builds .. gonna go check out the star video now.

[@cedarriverwoodworking]

I really appreciate the support.

[@rickpouley7561]

I have to say, I like both the painted and unpainted trees alike.

[@cedarriverwoodworking]

I'm glad you've enjoyed the videos.

[@martinebangs6520]

Hi there, beautiful tree, the red and white captures the sesson better...Take care...cheers...🍁 🍁

[@cedarriverwoodworking]

I am particularly proud of the painted star.

[@jenniferkeyse5246]

Love the natural tree. It matches my home decor. However the red and white is also beautiful and festive.

[@cedarriverwoodworking]

I am particularly fond of the painted star.

[@karlriley1314]

I like the painted one. They both look great.

[@cedarriverwoodworking]

I am particularly fond of the painted one.

[@sandrataylor-burns2550]

Saw the tree 1st. These are beautiful. I love the stained tree. Very beautiful. I think I'd love to add lights to it. ❤❤❤

[@cedarriverwoodworking]

Thank you! 🤗

[@darrinhaymon5650]

This video came up so I am watching this one first. I like both but the painted one definitely more Christmas, although I am partial to the natural wood grain.

[@cedarriverwoodworking]

I tend to lean more towards natural as well.

[@tinamomoftwims]

Both versions are beautiful.

[@cedarriverwoodworking]

Thank you!

[@jerrybyrd7778]

Like the way you did that. I tend to like the natural wood look, but the painted one is nice also.

[@cedarriverwoodworking]

I lean more towards the natural look too, but I am particularly fond of the painted star.

[@rebeccaboyette866]

I like both styles. Thanks for the video, I could do this!!

[@cedarriverwoodworking]

I'm glad you enjoyed both videos.

[@loosebootwoodworking]

I love both of the trees, but I think the painted one really stands out. Great build!

[@cedarriverwoodworking]

Thank you! I appreciate the support.

[@okiegold]

I plan on tackling this project in a couple of days. I like both trees. I'll be painting the one I'm building, dark green with dark red diagonal pieces. Thank you for the plans.

[@cedarriverwoodworking]

I like the sound of those color combinations.

[@SpiritAscending]

Love both! But if I had to choose, then it would be the red and white. ❤

[@cedarriverwoodworking]

I am particularly fond of the painted star.

[@MrGunny]

I'm digging the painted tree myself. Thanks for sharing!

[@cedarriverwoodworking]

I am particularly fond of the painted star.

[@kevinatkinson9390]

Saw this video first then the star. Will be making one of these for my wife.

[@cedarriverwoodworking]

You'll have to let me know how she likes them.

[@user-qj6sx1tv8w]

Love the plain tree. Now to get my husband to build one! 🤞

[@chrisp.76]

I like both painted and natural.

[@cedarriverwoodworking]

I'm glad you like both. Thanks for making it to the end.

[@familymemories7924]

Simple and elegant. Plain tree is awesome

[@cedarriverwoodworking]

I really like the painted star, but I do love the plain tree.

[@melodywilson5255]

I love the plain wood! The pattern in the cedar is perfect.

[@cedarriverwoodworking]

Thank you very much!

[@raymondpotter7041]

Nice job - I like the painted tree a little better than the unpainted.

[@cedarriverwoodworking]

I'm particularly fond of the painted star.

[@Headdancer1]

Star first, then tree . Excellent explanation. I will make these.

[@cedarriverwoodworking]

Thank you! I appreciate the support, and you'll have to let me know how they turn out.

[@Kicsa]

This was so simple and such a nice project...Thanks, I have those tools, what an awesome guide!

[@cedarriverwoodworking]

Glad it was helpful!

[@santinocuevas781]

I like the painted star. Plain cedar looks really good

[@cedarriverwoodworking]

I'm particularly fond of the painted star.

[@amymeyeraan-wz9fy]

I prefer the unpainted tree. Thank you for sharing this!!

[@cedarriverwoodworking]

I tend to lean towards natural as well.

[@rickynelson4616]

Thanks for sharing, I'm going to make some for my wife

[@cedarriverwoodworking]

I'm sure she will love them.

[@chrismosca2588]

I love the painted one it looks better you could put lights on it too that runs on 9v battery

[@cedarriverwoodworking]

I am particularly proud of the painted star.

[@barbarasimpson7771]

Just came across your videos. I love the trees ! Both of them, you can personalize your tree to the person on the receiving end. Video is easy to follow with use of basic tools ✔

[@cedarriverwoodworking]

Thank you. I appreciate the support.

[@donaldlemley-hl2ke]

Saw the tree first , I perfer painted! I'll be watching the star design later today. Thank you for sharing the projects!

[@cedarriverwoodworking]

I am particularly fond of the painted star.

[@dawnreynolds519]

Love the trees!! I would like to see one in natural and a forest green. Thanks for sharing the plan..

[@cedarriverwoodworking]

I think natural with the base layer of green would look great.

[@nicholasberry5766]

Fellow Cedar Rapidian here. Looks great. I used one of your prior tree videos to make some trees for our flower boxes.

[@cedarriverwoodworking]

Nice to see you here. I'm amazed at the reach of these videos, but I'm even more amazed when I see someone from my home town. You'll have to send me some pictures of the trees you made.

[@alexreid4131]

Been waiting for this one. Awesome stuff. Gonna build one later today. Thanks buddy.

[@ozone5100]

I like both styles. Love your video! very clear and simple to follow along. watched it the first time to see how it all goes. Now for the star video.

[@cedarriverwoodworking]

Thank you I appreciate the support.

[@2681smiley]

Thank you for making these a simple as possibles I’ve seen other videos with people trying to do the angles on every board and was wondering why they didn’t just cut off the extra after assembly to make it easier

[@cedarriverwoodworking]

That was the goal to make it as simple as possible.

[@kisslooms922]

I love both the painted and the plain.

[@cedarriverwoodworking]

I'm glad that you like them.

[@Gozeto17]

This is awesome, an great project for next weekend. I saw the star first.

[@cedarriverwoodworking]

You'll have to let me know how they go.

[@Gozeto17]

@@cedarriverwoodworking so far so good. I need to downsize the star for my trees.

[@cedarriverwoodworking]

@@Gozeto17 To do that use material that is less wide. so instead of a 3.5" width, you could use a 2" width. your measurement will change (the one that I call out as being 6"). just measure the already cut side and use that as your measurement to cut the first 36 degree angle.

[@Gozeto17]

@@cedarriverwoodworking yes sir.!! That's exactly what I was going to try. I did a scetch and found the dimensions change depending on the width of the work piece.

[@KevinMichael-l9g]

I like the painted tree. Great video. Thank you.

[@cedarriverwoodworking]

I am particularly proud of the star on that one.

[@jayneal8293]

I like them both ways, depending on the application. Great work

[@cedarriverwoodworking]

Thank you very much. I appreciate the support.

[@ellenmcgrath8241]

I love them both but I like the color on the red tree. You could use any color you want. Great work😊

[@cedarriverwoodworking]

I am rather proud of the star on the red one.

[@beckyadams5175]

I like them both. It’d look awesome with contrasting colored stain on the wood one

[@cedarriverwoodworking]

I like that idea! I'll have to give it a try.

[@Matt-p5q]

Painted tree is best for me awesome build

[@cedarriverwoodworking]

I'm glad you enjoyed both videos. I appreciate the support.

[@MartinStone-ei6jx]

I like the painted tree. You can see it a lot better if you put it outside. 🎄

[@cedarriverwoodworking]

I am quite fond of the painted star.

[@PiercesPerfectPieces]

Truthfully I like them both, but the red & white just make it look even better (in my opinion)!! & I also love all the Christmas Tree builds you do year after year too! 👍💯 🎄⭐️

[@cedarriverwoodworking]

I'm glad you're enjoying them. Thank you for all the support.

[@username14219]

I think I'll be doing this for next year but maybe with a lighter green on top and a darker green below. Definitely excited to make this!

[@alanrahl5522]

Great job. I like both, maybe the painted slightly more.

[@cedarriverwoodworking]

Thank you. I'm particularly proud of the painted star.

[@timgwaltney5770]

Another great video. Excellent pace and the right amount of detail

[@cedarriverwoodworking]

I appreciate the feedback. I was worried that the video was going to be too long.

[@sherrykissell4339]

Im liking both trees 😊

[@cedarriverwoodworking]

Well thank you.

[@redbearlake5767]

I like both but prefer the plain. Great video. Gonna go out to the shop and make one now 🙂

[@cedarriverwoodworking]

Glad to see you again. I tend to lean towards the natural looks too.

[@jaimemorvik9353]

Thanks for the video. I like the natural one. Now heading to watch how to make the star.

[@cedarriverwoodworking]

Glad to see you on this video too. Again you'll have to let me know how everything turns out.

[@tompowell1260]

Watched star video first . Liked plain tree better . Great videos . Thanks

[@cedarriverwoodworking]

I tend to lean more towards natural as well.

[@brew1205]

Both have their own appeal and applications.

[@cedarriverwoodworking]

I completely agree.

[@gerardovarela3704]

Very good explanation, thank you, both are so nice 👍

[@cedarriverwoodworking]

Thank you very much.

[@mangostone9393]

I love the plain tree but both are great. Thanks for the video

[@cedarriverwoodworking]

I tend to lean more towards natural as well. I appreciate the support.

[@tomjernigan3010]

I saw the star first. Enjoyed both.

[@cedarriverwoodworking]

Glad to have you and I appreciate the support.

[@billlawrence9594]

Watched the star first for no apparent reason. I might give both a try for next Christmas. I’m think a base out of 6” tube or a 6”-8” pipe would look cool.

[@cedarriverwoodworking]

Glad to have you here too. Some tube is an interesting twist on it.

[@billlawrence9594]

@@cedarriverwoodworking thank you sir. I have a couple projects I have to do when able to do a little more. I have some 2x2x3/16 angle I need to build a ramp to my shed with, I have old treated 2x6 from my neighbors pool deck for the deck boards. After the gotta haves I’ll be trying some of your projects. Been great watching your videos.

[@cedarriverwoodworking]

@@billlawrence9594 Glad to have you and I appreciate the support.

[@squid7004]

i like the painted. great job

[@cedarriverwoodworking]

I'm particularly proud of the painted star.

[@craiggoodwin9704]

Andy, If I were building them I'd have to have a painted and an unpainted tree. Heading over to see the star video now. Thanks for Sharing!

[@cedarriverwoodworking]

Luckily now you can make both! :)

[@patsymatsumura4539]

I like them both, but the painted one really shows off the spirals better 👍

[@cedarriverwoodworking]

I am particularly fond of the painted star. I appreciate your support.

[@darkknight7409]

the painted tree looks pretty good

[@cedarriverwoodworking]

I am particularly fond of the painted star.

[@bonniekleindl5070]

I like both. Might have to try these.

[@cedarriverwoodworking]

If you do, you'll have to let me know how they turn out.

[@loriann7759]

I saw your star video first! Love both of the projects! Best wood tree I have seen on KZbin so far. Thanks for sharing🎉🎉

[@cedarriverwoodworking]

Wow! I appreciate that! There are tons of trees on here so that is a huge compliment.

[@fmgough]

Painted looks best. Nice job. Going to have to make some of these.

[@cedarriverwoodworking]

I am particularly fond of the painted star. You'll have to let me know how they turn out.

[@irrelevance1907]

These are awesome. Gonna make for my girl

[@cedarriverwoodworking]

You'll have to let me know how she likes it!

[@quinnalbrecht1351]

Saw this first. I like the plain better, might think about staining the star for a wall mount version tho. I ended up adding two more feet, front and back, because it fell down after an hour outside with two feet. Just used more 2x4 than the plan called for.

[@cedarriverwoodworking]

4 feet is the best way to go. I'm sorry I didn't include that in the video.

[@susanzuern1428]

I like both trees. Will give this a try

[@cedarriverwoodworking]

Thanks. Good luck with your builds. You'll have to let me know how it goes.

[@jasenking4092]

Plain trees are always great both are very cool thank you

[@cedarriverwoodworking]

Thank you. I appreciate the support.

[@mikeconnel777]

Lovem both. Am now making Christmas gifts! Thanks!!!

[@cedarriverwoodworking]

Thank you! I appreciate the support.

[@SandyWells-e8o]

Both trees are very nice. Great plan!

[@cedarriverwoodworking]

Thank you very much.

[@larrystone5749]

Great job and project thx for sharing enjoyed it Keep building

[@cedarriverwoodworking]

Thank you. I hope to keep posting projects like these.

[@CynergyDiva]

I love the painted one

[@cedarriverwoodworking]

I am particularly fond of the painted star.

[@sportiekc2944]

Painted though each is nice. Saw this video first.😊

[@cedarriverwoodworking]

I'm particularly fond of the painted star.

[@dawnske15]

Like them both very much. Can’t wait to give this a try!!

[@cedarriverwoodworking]

I see you've been doing quite a bit of watching my videos! I really appreciate the support!

[@richardwadsworth4259]

Watched tree build first love painted tree candy cane style looks awesome 👌 👏

[@cedarriverwoodworking]

I am particularly fond of the painted star.

[@skiddytwin4759]

I just found your channel. Nice tutorial. Painted for sure!

[@cedarriverwoodworking]

Glad to have you, and I appreciate the support.

[@Bearded-Viking-WoodWorks]

Hey man ! Great content as always ! Glad to see you making some sawdust !

[@cedarriverwoodworking]

It's been a minute. I was sick for a few weeks. I see you've had some pretty good videos out lately. Keep it up, I'm rooting for you.

[@JettTheVizsla]

I love the painted can't wait to give this ago.

[@cedarriverwoodworking]

I am particularly fond of the painted star on top. I appreciate the support and you'll have to let me know how it goes.

[@JettTheVizsla]

@cedarriverwoodworking they look great. If mine comes out half as good as yours ill be happy 😊

[@3DogsCustomEngraving]

Natural tree is awesome

[@cedarriverwoodworking]

I'm glad you enjoyed it.

[@cherryguthriepeoples658]

I love this, i believe i can make one (or more)! Thank you! I will be watchig a lot more of your videos. Have a wonderful Christmas!

[@cedarriverwoodworking]

They are fairly easy to make. I am glad that you enjoyed the video and I appreciate the support.

[@BigHen36]

Great work I saw this video before the star video and I like both trees, LoL. Raw clear protective finish for me, but the kids would prefer the painted tree

[@cedarriverwoodworking]

I do prefer more of the natural look.

[@tokenfilipino]

Love to see a fellow 7-footer doing woodworking. Not too many of us out here 😂

[@cedarriverwoodworking]

We have to stick together!

[@KeithGlensky]

I like the painted one - you can tailor them if you're giving them as gifts

[@cedarriverwoodworking]

Absolutely! I like that idea.

[@OurBackroomCreations]

Love the tree! I'm going to make one to use as a display for Christmas ornaments for my booth!

[@cedarriverwoodworking]

These would be great for that!

[@patti3252]

Really like these. I like both versions.

[@cedarriverwoodworking]

I am particularly fond of the painted star.

[@donwoodshop]

Love the painted tree look. Could you do a video on doing a smaller tree in this style?

[@cedarriverwoodworking]

Thanks for making it to the end. I will absolutely help with some smaller ones. How big were you thinking?

[@donwoodshop]

@@cedarriverwoodworking about 24 inches tall.

[@debbayley2161]

Love the natural tree! Saw the tree video first - going to look for the star video now!

[@cedarriverwoodworking]

I hope you enjoy that one too.

[@randallmasoner]

I like both. I would make the slanted pieces a little longer and use a spacer so they have the same angle all the way up then trim the ends. Great video!

[@cedarriverwoodworking]

Yes the slanted pieces could be a little longer to help with the overlaps.