Ceiling Fan Install | Hunter Fan Company

Shop Ceiling Fans (Affiliate Link)
click.linksynergy.com/deeplin...
Thanks for watching! Subscribe, Like, + Share if you enjoyed this video!
Amazon Store | Project Tools Listed by Category
www.amazon.com/shop/marshallremodel
Mad County Build Series 100+ Videos
• Mad County Build
Thanks for stopping by our channel! We are self building our family of 5 a post frame barndominium in Iowa along with the life we’ve always dreamed of.
The goal of our channel is to inspire others to build their dream by providing education on construction and an in depth look at how we’ve gotten to this place.
Email:
[e-mail]
Mailing:
PO Box 11
Winterset, IA 50273
#postframe #selfbuild #promotion

[@mandzhik2438]

*Love it! Keeps the room very **Fastly.Cool** . The manual states it comes with a year warranty and 5 year part replacement. The compressor makes the typical sound...small price to pay for AC.*

[@MrPostFrame]

We like using them

[@luvbigiron]

We have a vaulted ceiling so we installed a Hunter fan with a fairly long drop. We use the remote that mounts directly to wall switch and we love it. Hunter is hard to beat. Super quiet and reliable.

[@shaunglendinning]

Great job Paul and Emily, everything is starting to take shape nicely!

[@bartjackson159]

Paul; you and Emily are such great work partners! I am not surprised by all the videos I have watched with both of you! Teamwork makes The Dreamwork! Your home is evidence by the quality work done

[@kenknight4560]

Always agree with spouse on inside decor and paint, then when it comes time to make choices about garage/workshop, new car/truck you have capital to cash in. :)

[@eleanorflynn370]

The fans look great

[@will4us]

Awesome 👏 thank you for all you do. I love the chemistry within your marriage “the hand up” “man down” in your previous wooded headboard video, made me laugh 😂

[@millieschattime9924]

I was just thinking about that episode 😂

[@MrPostFrame]

😂 Glad you enjoyed it

[@mmanut]

They look Great, SOLID PRODUCT‼️ Vinny 🇺🇸

[@opinioncounts5490]

I have six hunter fans in my home, the two that have remotes don’t work because the stupid remotes were made in China and broke in less than three years. Good job Hunter

[@craigs5212]

Paul, Hunter has been around for a long time, good product. There original models had low rpm cast motors with oil bath babbitt bearings. They are super quiet and last for ever. If you ever work on them don't turn the motor upside down or tilt them too far the oil will run out and make a mess of things, my dad found out the hard way and ruined a carpet. Your house is looking really nice.

[@Mrdashtard]

That's the original Hunters. They are garbage now since bought out. The internal parts are garbage now.

[@chriskirkpatrick8885]

@@Mrdashtard Agree! My recently installed Hunter Dempsey indoor low profile ceiling fan has a low hum which is very annoying at night when you're trying to sleep. None of my Hunter Douglas fans had this hum in the past. Wish I had bought a different brand.

[@garymitchell625]

I have really enjoyed your channel. Its been fun to watch your homebuild come together. We may be building our own soon. ( Hopefully)

[@MRossDouglas]

Nice job. Hunter ought to use your video for its tutorials. Probably much clearer and more watchable than anything their marketing division would produce.

[@MrPostFrame]

Awesome, thank you!

[@darwinawardcommittee]

Can’t go wrong with a Hunter fan! I had 6 of them in my last condo I renovated. 2 in the living room, 1 in each of the 2 bedrooms, 1 in the kitchen and one on the deck. I only have one in the bedroom in this new place I’m going to renovate. The Hunter I have now is WiFi controlled - sounds lazy but it sure is nice to say “hey google turn off ceiling fan” versus fumbling for the remote when you are half asleep and cold. Or turn it on when you are hot. Getting out of bed is for suckas!

[@dansullivan2954]

Always good videos. Anxious to see your hand rail install. Any idea when you will be doing that?

[@htownelectrican]

Great job! Just a tip from a professional, on your device plates put all your screws vertical (level) . It’s the little details that will satisfy you the most!

[@EthanMatlack]

Plumb, but yes 🙌

[@mkzenthusiasts]

Oh Mrs Marshall your hair looked great. Everyone is looking at your smile and eyes anyway 1🤣

[@MrPostFrame]

Oh gosh thank you

[@mkzenthusiasts]

@@MrPostFrame you're welcome. You guys should be on the Magnolia Network

[@MrPostFrame]

That would sure be something!

[@royreynolds108]

Are you going to run them in reverse for the winter? In reverse pushes the warm air up, across the ceiling, down the walls to the floor keeping the air mixed without the breeze.

[@donovandavidsonAlton]

Love your approach to your house. Is there light at the end of the tunnel?

[@kdm1234gmail]

every few months. Say round the change of seasons from spring and summer to the colder of fall and winter here. I like to take them down, wash them and then I'll put them back up flipped to change up the space and keep parents from getting use to the look of the space and feeling inclined to do unneeded changes to "switch it up".

[@wallaceloper637]

Good video for beginners and old-timers. just saying

[@JonathanCastro-rc2xl]

Looks great, and with a brighter bulb installed that’s all the light you need. kzbin.infoUgkxWF88GpljEn-0o34vtLFazEQ5h5Q33SjU As far as ease of installation- this was my first ceiling fan and it took about 3 hours because I had no idea what I was doing and also it’s helpful to have a second set of hands and a magnetic drill bit. Works great.

[@wontsay7923]

I have the exact same ceiling fan in my living room. Absolutely hate it. Never have had problems with Hunters, until this one. There is a clicking in the motor. I've taken the blades, shrouds, light fixture off to isolate the issue. It's in the motor itself. Problem is, its mounted to an 18' ceiling, so I have to get out my scaffolding to replace. For now, I just don't run it. I hope you guys have better luck with yours. It does look nice, though.

[@MrPostFrame]

Oh wow. Have you reached out to their customer service? We’ve never had problems either.

[@Mrdashtard]

Hunter fans are garbage since they got bought out. My father has been in the industry for over 40 years and used to sell them but dropped them when they got bought out and the internals gutted for cheap crap.

[@TheGregWallace]

Hunter quality has really gone down hill.

[@philipbara7806]

Hunter tech support said they do not recommend the wall type controllers (particularly Leviton/Lutron models) and I've been told it can create an annoying "buzz" noise in the fan. Was that your experience? What about the light controller at the wall switch? My home wiring has black-red-white wires to separately control the light.

[@TheGregWallace]

You can get a buzz or hum in the fan either way. Their quality has gone down hill.

[@remushaynes2693]

greetings folks; i realise hunter is supposed to be self balancing but i have some that does not. anyway, i wanted to give yall a hint: the black metal paper clips that have the handles that fold away are excellent to clip on the blades to balance with. love them and use them often..................g

[@MrPostFrame]

Thanks for the tip! Ours came with a balancing kit should the need arise

[@remushaynes2693]

@@MrPostFrame yes sir; they all do but most will not stay put when installed. these clips will not loosen or go flying. have used them for years...................g

[@samsung-eh4dv]

What are the names of the model fan you used?

[@donaldwilson3992]

You didn't show how to connect the blades. I'm removing the fan. I can't find anything on removing the blades.

[@donaldwilson3992]

Disregard I didn't see the whole video at first 😮

[@benhellerman3864]

C'Mon Paul you're giving men bad raps we don't read instructions lol

[@rickbecket2820]

You need an electric screw driver.

[@MrPostFrame]

You're so right. All the things we've gotten and never one of those!

[@richardsweat4967]

Did she really say your right?

[@wrfarms9741]

Hunter makes some really nice fans but the FIRST thing everyone should do is remove/bypass the STUPID & failure prone EPA mandated current limiters designed to control what size/wattage light you can use in the fan. 🙄🤦‍♂️ Great install video! 👍

[@truckdirty]

How would you go about doing that? It's probably simple, but it's also pretty simple to mess something up and burn your house down l, lol

[@IsmailNuzaifKokky]

.

[@TheGregWallace]

Comment.....The quality of Hunter Fans have gone down hill. Buying a fan from Hunter now (2021) is hit or miss on whether you with get a good one or not. The motors can be loud and the finish on the blades can be terrible. Hunter used to be the king, now they are just another fan company.

[@MrPostFrame]

So far ours are holding up but we get what you mean. Sadly lots of stuff is like that

[@chriskirkpatrick8885]

So true. Wish I had bought a different brand. The hum when running is extremely annoying at night.

[@johnmarquardt1991]

Your house looks really nice except for the wood floors.