Cerbios Now supports XboxHDMI and HD+ BUT....

In this video we take a look at an early Proof of concept builds of Cerbios that adds support for the Makemhz HD+ and XboxHDMI.
This build is not released to the public yet and I haven't been given an ETA on when this will be released as of now but I suspect this will be getting ironed out and released quite soon.
If you purchased the StellarHD+ you are totally out of luck as those are designed to only function once connected to a stellar. This will only work for the older Hd+ or the xboxhdmi.
Cerbios is completely free and works on any tsop and the the most basic of modchips available.
If you don't already have an older xboxhdmi or hd+, stay posted to this thread here and see what nemesis ends up cooking up.
www.ogxbox.com/forums/index.p...
There's also the Retro Gem from Pixel Fx will likely be adding xbox support very soon. If it's anything like their other products, these should just work with whatever bios and application that you throw at it.
www.pixelfx.co/product-page/r...
-----
🤘Pre Modded Consoles / Check out My Send in Services / Written guides / Video Mirrors and All things ModzvilleUSA :D 🤘
modzvilleusa.com
🤘Not My Backup Channel Just In Case Ninty Nukes Me🤘
/ @notmodzvilleusa
All videos are Mirrored on LBRY here!
lbry.tv/@ModzvilleUSA:a
🤘Join The Discord!🤘
/ discord
🤘Instagram🤘
/ modzvilleusa
🤘Catch the Streams on Twitch!🤘
/ modzvilleusa
🤘Twitter🤘
/ modzvilleusa
🤘Odysee (Channel Mirror)🤘
odysee.com/@ModzvilleUSA:a
🤘Bitchute (Channel Mirror)🤘
www.bitchute.com/modzvilleusa/
🤘Facebook🤘
/ modzvilleusa
🤘Contact🤘
Email - [e-mail]
Discord - ModzvilleUSA#7403
ModzvilleUSA
P.O. Box 20669
Long Beach, CA 90801
------------------
THE TOOLS I USE!
------------------
KSGER soldering iron
amzn.to/2sAockl
Soldering Iron Tips
amzn.to/36Hb0cp
Flux - Amtech NC-559-ASM-TF
amzn.to/38JuGTr
Solder - Kester Leaded
amzn.to/3jq1nHi
99% Alcohol
amzn.to/2PLrYQ0
Hakko Vacuum Pen
amzn.to/37y2xhc
Soft Bristle Tooth Brush
amzn.to/2sAnyDr
Tweasers, Exacto, Flush Cutters
amzn.to/2rR4q4i
30awg wire
amzn.to/3xe1heb
34awg Magnet Wire
amzn.to/3O3ivAL
28awg silcon wire
amzn.to/3KrYx0D
28awg ribbon wire
amzn.to/37BfLK4
Wire Strippers
amzn.to/2Pu0mA9
Helping Hands
amzn.to/2PsJqJW
Hakko Desoldering Gun
amzn.to/3q7D57b
Hot Air Rework Station
amzn.to/2Vdh34L
Hakko curved tweezers
amzn.to/3Jluma1
Microscope
amzn.to/3v5BhPs
Heat shrink tubing
amzn.to/3LTSqCi
Soldering Mat
amzn.to/35XLwgd
Precision Hot Glue Gun
amzn.to/3KuQP5A
Brush On Super Glue
amzn.to/3upOnru
Lithium Grease
amzn.to/360JQCE
Silcon Grease
amzn.to/3uqLmap
Retrobrite Goo
amzn.to/3Jm1MFf
Craft Knife Set
amzn.to/3Jqxqlg

[@ssdave9503]

This is the best news I have seen all day and it also gives me a reason to fit the HDMI kit I got a ages ago

[@sylverrez]

Amazing video man.

[@notkyloren]

It's really funny. I went Softmod (back in the day, I'm talking like '06/'07, before the All-In-One tools like Hexen came out) --> TSOP with Cerbios recently --> Project Stellar --> Xenium Black Ice with Cerbios. I watched your video about Project Stellar being a letdown (for the cost/what it advertises), and I agree right now. I mostly bought it as a no-frills modchip because I liked the polish. But there are some things that I think are bizarre, like how you can't flash or load any custom BIOSes at all (besides StellarOS). It also introduces input lag in my games, like 007 Nightfire. For whatever reason, there's a noticeable difference with Cerbios/Evo M8+. Then there are the little things, like the boot animation lagging at 720p with Stellar and not being able to turn off the boot animation altogether. I also couldn't get Xbox One controller support working with my Series controller, even though it's one of the main reasons I bought the chip. I even completely formatted the HDD in both FatXplorer and StellarOS itself. Same issues. And worst of all -- I'm a MakeMHz fan, but I asked a few questions via email to their support email. They replied and told me to join their Discord. Their Discord just has Welcome / Announcements. So I paid $100 for a chip that does, at least right now, the same or less than Cerbios (which is free and doesn't even require a modchip). I don't like that I can't see what he (MakeMHz) is working on via beta releases or anything, even though the option is there. And now, I ordered the Xenium RGB kit off eBay, so using the Xenium chip is not a question. I like Stellar and I think it's amazing that we have a Raspberry Pi running in an Xbox. But I feel like I'm walking through a tunnel blind right now. I have no idea what features are coming or when.

[@TheCoolerFury]

A lot of Discords gate off their channels by making users click a button or press react to a post (usually a terms of service). In fact, I just checked now: You need to 👍 the terms of service and all the other channels will appear.

[@notkyloren]

@@TheCoolerFury Well shit. Thanks for the pointer; I genuinely missed the part where I have to react. I kept wondering why nothing was changing. I still stand by everything else that I said, but I appreciate you clearing that part up at least.

[@BoosterTheRooster1]

Another banger video 😎

[@esraeloh8681]

OK so this really confirmed what I suspected might be the case with this new XboxHDMI+. I knew about this mod 2 years ago when I first modded my original Xbox, which I got waaaay back in 2002, but never bothered with as that was also my fist soldering experience & this would simply have been impossible for me. It's only been about a week since I decided it's finally time I HDMI'd the thing, & well, started seeing that stellar thing attached & the HDMI PCB looking distinctly different. Yeah, I did wonder just how much things had changed & it did look like they were trying to force people into being locked into their hardware, & actually going so far as to prevent the new XboxHDMI to only work with their Modchip, although I do wonder if that is actually the case, as that new chip also works with that XboxHDMI Legacy board, I'm assuming it has that firmware chip & that allows other modchips to function with it. God this is such a headache to try & wrap my mind around. Oooh where to spend the money, I sense this is going to be at least a few months before I can make my mind up, or to just not bother until later this year if at all.

[@TiZmSpectrum]

Based for playing 2x 🤝

[@FearHeyZeus]

So is this put yet and can it he put on an extisting cerbois chip? Also wondering on what’s better cerbios or open xenium I’m interested in titan patch for faster load speeds and hdmi mod. Let me know your recommendation

[@XavyreHeil]

Kinda dumb how you're tied to buying Project Stellar to use the XboxHDMI. Got an X3 chip and I want to mod in an XBOXHDMI without the stellar. How come they can't sell those like they used to?

[@ModzvilleUSA]

Because they want to sell you a modchip as well I guess.

[@KD--jz5zi]

I can probably make them. Nem is doing it though so haven't bothered though do have pcb's and parts, but need to redo the pcb on eagle. Might get around to it eventually as with everything else I do lol

[@Wally17.]

Yeah that’s unfortunate for people who didn’t get the original XboxHDMI or the HD+ before Stellar and the HD+ version 2.

[@Totalrealist]

Any chance you can release the xurrent cerbios patch for it or precompliled bios?

[@ModzvilleUSA]

Just wait for it to be released. The bugs with the app have already been fixed. I can’t imagine it’ll take too long

[@davieslm]

Does anyone know if the video issue over composite or RGB SCART has been fixed with 1.6 motherboards in this version?

[@hecticxhabib4990]

Does cerbiso have a force 480p option.

[@controlcommerce]

Very cool!

[@IcyModzXeX]

I was thinking of doing just a internal install of my Xbox2hdmi from electron shepherd would that be worth it? What makes the Xbox hd better than electron shepherd? It's crisp ASF I've used others and this one takes the cake..

[@JohnDoe-lz8yt]

The XBoxHD+ is a digital signal taken directly from the GPU data bus. The Xbox2HDMI takes the Xbox's analog component signal and converts it HDMI. The XBoxHD+ will give you the best possible picture out of all the available solutions out there right now but there are a couple more being worked on. The problem with the XBoxHD+ v2 is that it requires you to also have to buy the Project Stellar modchip for the HDMI mod to work. Obviously if you already have a different modchip installed that may not be a good solution for you. As far as an internal Xbox2hdmi mod, that may be a good compromise but that would be a digital signal converted to component analog than has to be convert back to digital for HDMI. If you wait there are other HDMI mod solutions being worked on that will give you the pure digital video output that will work with your current modchip. Also, Electron Shepherd does offer a cheaper option if you wanted an internal HDMI for your Xbox. Its called the Analog2HDMI and is currently $19. There is a youtube video by Spielgruft showing how to do this mod but its in German. Still the process is easy to understand.

[@JohnDoe-lz8yt]

Internal XBox Analog2HDMI mod: kzbin.info/www/bejne/raHZnpepaaZllac

[@border056]

I’m here for the slap fight.

[@itsyaaboii]

How can I get Def Jam Fight For NY to work??? I only get a black screen

[@PaulHenning84]

I'm really tired of ODE / HDMI board makers trying to lock people in or getting caught up in chip shortages. Someones working on a Pico-based Gamecube ODE. I'll do it to all my cubes once it's available.

[@ModzvilleUSA]

flippyboot! Yeah I'm hyped on that.

[@PaulHenning84]

@@ModzvilleUSA I wanted to get a GC Loader for a friend's gift gamecube. Out of stock for years. The devs put anti-reversing in the firmware. Nope. From now on I'm buying only open source hardware. Don't even get me started on the Dreamcasts horrible ODE situation. I hope someone does Flipyboot for the DC.

[@thegreatjonzini]

Got a 1.0 hd+ board I still haven't installed. This could be a reason to finally do the install 🥂

[@yackyyam]

Same!

[@Mr_Milenko]

That’s sexy.

[@GoTeamScotch]

Hot af

[@SP95]

11:17 Yeah the one you actually have to play with your FOOT

[@ShooterBtv]

Is it just me, or do games run smoother/better graphics on cerbios? -compared to m8

[@ModzvilleUSA]

If you changed to udma4 or 5 that could be it

[@ShooterBtv]

@@ModzvilleUSA which udma is cerb2.3.2 (hd+ beta) ?

[@ModzvilleUSA]

@@ShooterBtv you can use cerb tool to set it to whatever you want.

[@ShooterBtv]

@@ModzvilleUSAany risk to trying udma 5 or 6? .. this one guy on Reddit claimed udma 5 bricked his system

[@ModzvilleUSA]

@@ShooterBtvI'd wager 5 bucks that person is an idiot.