CERVELO Service And Chain Waxing

[@deniscresswell3309]

Nice to see honesty not fleecing the customer for unnecessary work... 👍

[@matskelton9589]

‘The devils in the detail’……great mantra for life 👌

[@joshpeck7381]

Lovely looking machine 🔥 and another great video 👏🏻

[@Bikespeeds]

Thanks Josh!

[@percival3830]

Masterful.

[@Bikespeeds]

Thanks again🧡⚙️

[@souviknaskar5751]

One question. When the chain in so much stretched, chances are it might have also worn out the casette and when a new chain in put without changing the casette, under tension it might slip.

[@gregtremblay8785]

Love the videos! Greg from Kansas, USA.

[@Bikespeeds]

Thanks for watching Greg we appreciate the support 🧡

[@VideoGameAtlas]

It's crazy to me that the previous owner would buy SUCH a nice, expensive bike, and then seemingly not care, or take the time to learn, about things like the seat being pushed past it's max point, or the cassette having that play which was such a simple fix.

[@paulpitcher965]

Superb Lee and many many thanks 👍🏼

[@Bikespeeds]

It’s a lovely bike.

[@jamessheker6109]

Best service I’ve seen! Wish you guys were here in houston! Cheers

[@Bikespeeds]

Thanks for watching James!🧡

[@stevenelers6221]

Brought a talon like it very much,enjoyed your video,keep the good work up cheers

[@Bikespeeds]

There’s a few talons across the channel you might enjoy us working on!🧡⚙️

[@MayhemZwifting]

Great video!!🎉

[@Bikespeeds]

Thank you!🧡⚙️

[@danmccabe2004]

Some nice easy fixes there which must be very satisfying for the customer

[@fucktheworld1207]

Loving the channel, here in Liverpool, new subscriber.....KZbin suggested it to me 👌🏻🤙🏻👌🏻

[@Bikespeeds]

Good to hear, thanks for watching👍🏼🚲

[@NeoPayneHK]

i would love to see rebuilding the whole bike again lol a lot of mess

[@Bikespeeds]

We got plenty more videos just like this one for you!

[@chuckyfox9284]

I feel like you put a lot of work into a probably already fairly used up cassette (considering the overstretched and dirty chain), when a new one is 40€.

[@SaschaRissling]

DO you put copperslip on the cassette lockring as well?

[@lewardkeeneoppura2684]

question. can you replace an ultegra or dura ace jockey wheels on a 105 RD? does it make any difference in shifting gears?

[@jlcsolutions]

Great video, I’m getting ready to buy a used 2005 cervelo soloist, can you give me any pointers on what to look for ?

[@JamesSalomon947]

That's my lemon drop

[@yongz8086]

What a satisfying video! How did you torque the pedals? What tool you used other than the torque wrench? Mine can only work clock wise so the torque of the left pedal can only be estimated.

[@Bikespeeds]

The majority of torque wrenches only torque clockwise, I have a Snap-on one which also does anticlockwise I only use this for pedals and threaded bottom brackets.

[@yongz8086]

@@Bikespeeds Got you! Maybe sending my bike to local bike shop would be the cheaper choice LOL! Thanks!

[@jeremynorth]

Pedals don't need torquing as the threads are designed to prevent them unscrewing as you pedal. Similarly with the threaded BB

[@sjmclean0]

What brand is the paint brush you use on the casette?

[@williamhilliard7386]

Start too finish , FIRST RATE.

[@Bikespeeds]

Thanks William!🧡

[@austinbrdo]

I have the same bike, and my handlebars are slightly loose (with force I can turn the handlebars separately of the front wheel). Which of the bolts do I need to adjust? I’m worried about over tightening either of the two screws.

[@Bikespeeds]

My answer would be, if you’re worried about it and aren’t 100% certain how to do it, take it to a bike shop, it will cost little if anything to get it done correctly. Safety is paramount!

[@austinbrdo]

@@Bikespeeds I did today and tightened the bolt to 12nm per torque specs. If I hold the front wheel I’m still able to move the handlebars. Wondering if there is a fault with the system

[@Bikespeeds]

@@austinbrdo nothing on that stem should be at 12nm, you run the risk of fracturing the steerer tube. The adjustment for the bearing is separate to the stem. I’d recommend taking it to a bike shop for piece of mind.

[@Lampenmensch]

Hey Austin Dobbs, I’m having EXACTLY the same problem with my S-Series 2020. Have you been able to solve that in the meantime, and what did you do? I would highly appreciate if you could take the time and send me some advice if possible…

[@powerqualityscore8320]

How did you service the stem? I took that one long bolt out, but the headset still doesn't come apart.

[@Lampenmensch]

I’m having problems with my S-series stem as well. The bar still is a tiny bit loose even though I have fixed both screws in the stem as much as possible. Any advice what’s going wrong here?

[@nl_2652]

What polish do you typically use for gloss frames?

[@joshpearson2529]

Autoglym Super Resin Polish, followed by their ceramic coating spray

[@h3n488]

So what was that gray powder? Never heard of something like that -maybe I'm too much of a pleb to know...

[@Bikespeeds]

Molten speed powder, it’s supposed to be worth extra wattage by reducing some friction, it’s not necessary but it is a nice touch👍🏼🧡

[@dave2402]

Does he want to sell it? I'm drooling after one of these!

[@Bikespeeds]

I think he’s only just brought it! Lovely bike though, search one up for sure

[@dave2402]

@@Bikespeeds found one online - it will be mine!

[@smartie450]

You don't check the bolts for the chains rings? Or you just don't show it in the video. Because most of the times they don't have the correct torque setting.

[@Bikespeeds]

Hi, we absolutely do, this is one of our earliest video and we were still figuring out what to put in the videos and what not too, check out some of our newer content!🧡

[@miguelmurill1]

Guy buys a Cervelo and he doesn't know why his Chinese wheels are not working?