C4D Shattered Type - Cinema 4D Tutorial (Free Project)

[@DiiDaze]

I feel the need to share my appreciation with you mate, cause your channel is so precious to me! Great content, magical tutorials, so helpful, so good! I'm so excited to start my journey through c4d now. Thank you!

[@CGShortcuts]

Thanks heaps for the epic comment Diana! Makes it all worthwhile;) Glad we can help you along with your c4d journey, looking forward to seeing your creations! Feel free to get involved in our Facebook Group, we've got a really active community going😀

[@co0l]

4:28 SHIFT + LMB... (please note) thank you very much Dave, i find your channel very helpful

[@CGShortcuts]

Cheers! Glad you found it useful! We've got loads of extra resources on www.cgshortcuts.com and if you'd like to get involved you can join our CG Shortcuts Facebook Group facebook.com/groups/CGShortcuts where you can find more tutorials, get help, post your work and enter our monthly art challenges where you can win cool CG Prizes;) Thank's for watching!

[@eltolki]

Dave, i'am so grateful for the speed of your tutorials. Question: I do not have octane, it is possible to achieve this kind of finish with the regular C4D render engine? It would be great if you make a render tutorial with that render. Again, thanks and keep the good work.

[@CGShortcuts]

Good to hear you're liking the tutorials mate! I do most of my stuff in Octane these days because it's soo much faster and I'm pumping out a lot of content and 3D work. You can definitly achieve the same look without it but it might be a bit slower to setup and render. I made a full length course you can have a look at which covers rendering in the standard renderer (and compares it to doing the same thing in Octane) here's the link. Cheers!

[@CGShortcuts]

skl.sh/2ONN6GY

[@hdalank]

the best c4d channel for the 2018

[@CGShortcuts]

Haha, that's a big call;) thanks for the support!!

[@danielleyaor1821]

Thanks a lot for this wonderful video!

[@CGShortcuts]

Thanks for watching!

[@dimaswalliyutrianto8152]

I was looking this toturial like a month but thank god u made it, thanks.

[@CGShortcuts]

No worries, glad it helped you out;) BTW we also have a fancy new website full of loads of CG Resources if you want to check it out www.cgshortcuts.com thanks for watching!

[@modeling300]

Thank you my friend! Helped me a lot!

[@CGShortcuts]

No worries, loads more tutorials at cgshortcuts.com

[@恶魔人]

thank you very much,love your tutorial

[@CGShortcuts]

No problem;)

[@abmediafx9633]

I like the short tutorials from you. I could build it well. Sorry I'm German and not English well can. Do please continue so that was very good.

[@CGShortcuts]

No worries, glad it helped you out, more on the way!

[@NC17z]

Thank you so much for the Tutorial as well as the project file. This is Awesome!

[@CGShortcuts]

Glad you like it mate! BTW If you didn't already know about it we now have a Facebook Group if you'd like to get involved facebook.com/groups/CGShortcuts. Thanks for watching!

[@jrejabathjr1114]

i like your professional style of doing and speaking also the shortcuts i'm a student but i'm studing more in graphical designing also iam subscribed you

[@CGShortcuts]

Awesome mate, welcome to the channel! Glad we could help you out! More tutorials coming soon;)

[@tex2296]

Nice tutorial 😊🙏

[@CGShortcuts]

Thanks Tex!

[@spacepickshovel]

very simple and understandable tutorial. keep the good work! aaaand you got yourself a sub.

[@CGShortcuts]

Cheers mate, trying to keep them as short as possible and straight to the point. More coming soon, hope it helped you out!

[@hdalank]

can you please do a tutorial about hair or fluffy balls falling down !?

[@RaphaelPavel]

I know you're building a lot of stuff in Octane so it would be great if you go a little bit deeper into creating some of the materials in your scenes. You could potentially do a tutorial to replicate the styles that wannerstedt and motiongraphics_collective. Patterns/ textures, etc. Take for example the Jelly scene you have. Would love to see the material you used in the Jelly scene for example. Thanks!

[@CGShortcuts]

Thanks for the feedback Raphael! I've got a big list of tutoirals to get through, including very soon some stuff on Octane so hopefully Ill have something for you soon! Thanks for watching!!

[@adi4232]

love it!

[@sergeypobedin4917]

tHX, BUT i NEED MORE INFORMATION ABOUT CRCKS AND GLASS MATERIAL,

[@CGShortcuts]

Here's a little tip mate, use a standard glass shader (refractive index 1.465) and put an image like this into your roughness and bump www.pinterest.co.uk/pin/170503535867489929/?lp=true, that'll give you the same look;)

[@arijeetbhattacharya9787]

when will you make tutorials for the animations you put in between the videos like the one here "10 mins later" one ?

[@CGShortcuts]

Maybe we could do some more stuff about animation

[@Marcel_Oldman]

Wow job!

[@CGShortcuts]

Cheers, Hope you found it useful!

[@kaamdean]

hey man , u are doing great here , thanks alot for that , just one thing if u , add some text like subtitle under the videos to show the hotkeys you use , it'll be super ! cause ppl like me with 0 knowledge of c4d , dont know the hotkeys at all thanks again

[@CGShortcuts]

I think most of my videos show the hotkeys dont they? I make them prety fast so some times I miss them though;) Glad you're liking them👍

[@voronoi7641]

Clear, simple, fast, super useful! Thank you!

[@Motion-cafe]

Hey cool stuff here :) hope your channel will grow !

[@CGShortcuts]

Thanks mate! Slow and steady I guess. You've got some great stuff going too, you've got yourself a subscriber;)

[@Vertexvoyager]

hey is there a way to make sure the pieces do not move inside one another?

[@CGShortcuts]

Add dynamics to the shards

[@michahall9363]

Hi great tutorial however i dont have the octane render and the hdri lights, could you show us how to install it correctly

[@CGShortcuts]

Hi mate, if you buy Octane from the Otoy website they have loads of info how to install it correctly;)

[@Vertexvoyager]

@@CGShortcuts what do i do if i dont have ocatane?

[@muralikrishna4209]

Plz tell how to apply material and lights...?

[@CGShortcuts]

Hi mate, just a glass material and a HDR for lighting, nothing too fancy. Thanks for watching!

[@breinardk]

@@CGShortcuts i'm new to cinema 4D. When I downloaded the project. It said there are some missing files/plugin? what should I do. I don't understand how to apply the material and lights..

[@Vertexvoyager]

how do you get the rainbow colors showing on your text?

[@CGShortcuts]

Thats the Transmission 'Dispersion' effect in the material. This value describes how much the refractive index (IOR) in a transparent material varies across the spectrum of light wavelengths which results in a color shift in the material.

[@Vertexvoyager]

@@CGShortcuts thank you really amazing tutorial!

[@TheosEpicVideos]

It’s like you’re a professional or something...

[@Vertexvoyager]

how do you get octane camera?

[@CGShortcuts]

Octane is a third party renderer (plugin)

[@Vertexvoyager]

@@CGShortcuts oh thanks a lot!

[@motiondeshahil]

Hi guys. Can anyone know how to solve voroni fracture doesn't rendering in octane but it is fine in octane live viewer ? I mean when i animate shattered glass in voroni fracture its fine in octane live viewer. But when i give final render nothing displayed where voroni fracture shattered glass or object. But background lighting and other rest of the object rendering but voroni fracture won't rendering..

[@CGShortcuts]

You might need to cache it or bake it;)

[@motiondeshahil]

@@CGShortcuts hi. I just found the way to fix. Just put voronoi fracture in to cloner object and keep count 1. Thats it. Problem fixed

[@karmgravity2253]

how to download yours project because i can't download

[@CGShortcuts]

Hi mate, here's the download link bit.ly/2qp2H1q I just checked and it works for me. Are you getting the 'Sorry, this item is not available in your location' message?

[@motsregor3723]

download does not work

[@CGShortcuts]

Seems to be working for me, what country are you trying from? Maybe it's not supported by gumroad. If so you can try using a vpn

[@hdalank]

can you please do a tutorial about hair or fluffy balls falling down !?

[@CGShortcuts]

Good idea, I think I'll do both!