[超長片] 廠商差點傾家蕩產的旗艦手磨 - MAVO 幻刺 Pro | 幫自己工商算不算業配??

[@凱尼兒]

雨大推薦都很誠懇啊 ! 不用太糾結利益問題，一直以來對於優缺點都有很明確的表達感受，受益良多，很感謝分享！

[@John-fj7xd]

銀色看來也不錯，我買黑色止滑套套上磨著磨著會跑掉些~但好調整，喜歡它的切削聲且效率好。

[@wangyue]

我感觉用上硅胶套更容易滑就索性不用了

[@John-fj7xd]

粉瓶裝豆後可以完整合上方豆倉倒入，這點我覺得非常好~

[@wangyue]

正在喝用幻刺Pro研磨的曼特宁看这个视频，我就是那个说明书要撕开才能打开的用户😂刻度上中浅烘我用8，中深烘我用10，相比我之前的泰摩lite握持感和研磨效率都差一点，但细粉少很多。

[@blackpurplemail]

幻刺手沖很好喝，我用他建議的刻度8，手沖起來有香氣有甜感，感覺很中正均衡沒有偏向前後太多，厚實度輕一點點但還是比c40多(我比較喜歡這樣輕爽感)，比a68好喝😆，感覺不輸c40各有千秋。 感覺缺憾是不好拆清，要靠六角螺絲額外工具，而且感覺刻度0.5就快不能轉了有點怕轉到0會不會損害到刀盤，其他握感也很好。

[@小龍-h4j]

之前老闆在開箱的時候已經迫不期待去淘寶買了😂😂😂 沒想到老闆那麼快就進了 個人使用感覺是 用他們的手沖範圍會有點偏細

[@hefeng5338]

你的评测真是太好了 全都是站在消费者的角度！

[@WayneShih]

因為我也是會亂買東西的消費者嘛

[@Oneirophrenian]

In only speak English too, I bought this grinder mainly for espresso, Should I have bought the S3 instead?

[@clessiano]

The Mavo is best suited for espresso. The S3 doesn't grind fine enough for a good espresso. It is possible to make a small adjustment to the S3, placing a thin spacer of approximately 0.3mm, aligning the grinding wheels, as there is a small gap even at click 0.

[@clessiano]

What can you tell me about this Mavo model? Already have feedback? I'm thinking about purchasing it.

[@Oneirophrenian]

@@clessiano it's a good grinder for espresso, I've been using it for some months now, and I'm not disappointed

[@asd7289191]

@@clessianoSame

[@73365655]

請問都只喝拿鐵 用摩卡壺 適合哪一支手磨

[@BoomBoomQiQi]

嗨你好，看了你这期视频，让我更坚定今年我想入手是这款磨豆机了。想请问下用你的链接购买是可以运输到马来西亚的吗？

[@WayneShih]

我們沒有賣到馬來西亞

[@李聖傑-p6l]

目前手上一支泰摩C3、蠻想要入手S3那支，那支的收納很合我胃口。

[@WayneShih]

S3超讚

[@徐家老幺亮亮]

个人感觉S3最大的缺陷是它重心不稳太容易倒了

[@НикитаВолодин-э6ш]

Hello from Russia Thanks for your video. Please tell, Mavo Phantox Pro the grinding for the jezve? Does it give a compatible grind with Comandante C40 (3-9 clicks or 6-15 red clicks)) And how the grinding changes during adjustment: smoothly and gradually or stepwise heterogeneous.

[@sammyrabbat384]

Sorry I only speak English What do you think vs s3 and zp6 for drip pour over filter coffee Thank you!

[@WayneShih]

I prefer ZP6

[@sammyrabbat384]

@@WayneShih does the foldable handle for x-ultra or x-pro s fit the zp6 and if so does the zp6 with the foldable handle fit the x-ultra case

[@mikele7982]

Between this and 1Zpresso K series, which one is better as an all rounder grinder?

[@blackpurplemail]

I think this grinder is better than the 1Zpresso K series for pour-over coffee in terms of flavor clarity (not espresso). I also have a Comandante C40 and a 1Z K. I prefer the C40 for its more aromatic and layered flavor at the first sip. After getting this Marvo grinder, I feel it's on par with the C40. It's more balanced in comparison, lacking the wild, blossoming aromas but providing more sweetness while maintaining a clear and clean body. (For me, the M47 has become too heavy.)

[@xenodrake4008]

@@blackpurplemail you have the mavo, the c40 and the k ultra? A more detailed comparison would be super interesting. Do you prefer the c40 or the mavo?

[@blackpurplemail]

@@xenodrake4008 For light roast, the Marvo grinder produces a more diluted (watery) flavor, while the C40 offers better aroma in the initial stages. However, compared to flat burr grinders, the flavor from the C40 feels more compressed (with both mid and late stages appearing simultaneously), which results in a poor aftertaste after the coffee is swallowed. However, this is common among grinders with hand conical burrs. So the C40's good in the initial aroma stands out. I will perfer C40. On the other hand, if you often find the coffee beans you buy too acidic, then I would recommend the Mavo.

[@morei2801]

​@@blackpurplemailhave you tried zp6?

[@嚴子豪-f1g]

小雨老闆，可以拍一部這支磨豆機的歸零教學嗎？

[@WayneShih]

好，下次

[@tyymov]

老闆請問，去店面買回後立馬拆箱清潔、使用，整體滿意，但唯獨搖臂接點似乎無法與中軸密合、會輕微搖晃，空轉時很明顯，是正常的嗎？

[@WayneShih]

@@tyymov 正常的，搖臂如果不刻意做些微公差的話你在拆裝要比都會變得很困難的，如果你還有路過店裡的話可以去看展示機，每一支的公差都是一樣的

[@tyymov]

@@WayneShih 小雨哥請問，拆開刀盤清潔時發現，用手捏住中軸下端的軸心晃動、會有些些微的晃動感，也是正常的公差嗎？

[@WayneShih]

@@tyymov 正常的，不然你也拆不下來裝不上去

[@TwChris31]

手搖磨義式推薦那一牌比較好呀？

[@WayneShih]

@@TwChris31 Mavo吧，單論影片裡面提到的兩個品牌

[@Tyc_SileNce]

請問小雨大有底下墊片的規格嗎 我的墊片被我弄不見了Q_Q

[@WayneShih]

已經在幫你問了，但下次請直接用正規的售後服務管道啦，放留言到時候沒看到

[@Tyc_SileNce]

@@WayneShih 萬分感謝...

[@sstone2604]

博主也是人，肚皮也要顧!

[@WayneShih]

肚皮小一點，我想要顧胸肌

[@sstone2604]

@@WayneShih 很難！自古以來性情中人肚皮都會比較大點！

[@WayneShih]

那我只好當陰險中人了，委屈一點

[@sstone2604]

@@WayneShih 既然如此，那就開始存錢買幻刺！

[@芙芙泡]

顏色好美 真是太吸引人啦！

[@coolbass2010]

請教小雨老闆，針對轟炸機新出的利刃R3手搖磨豆機，你會有這新產品的評論嗎？

[@WayneShih]

暫時可能不會耶，我先忙搬家

[@andychen7899]

how much？

[@一一-y6r]

问了九土，定制logo要400rmb

[@WayneShih]

而且他們不會同意你訂製我的LOGO

[@BAGANONO_]

這集感覺一直對焦到盒子看的眼睛好花😅

[@WayneShih]

好，換相機！

[@辛西米托]

想請教一下豆倉有多大? 剛剛上網查了一下好像沒有人提到這件事， 做冰滴有時候會用到40g左右， 不知道這款有沒有辦法一次磨完?

[@嚴子豪-f1g]

我磨過最多45克，滿倉

[@WayneShih]

45g粉倉會不會滿出來？

[@DanielWang-h7l]

小雨老板，恳请解惑：不考虑价格的话，Mavo 幻刺Pro和泰摩 栗子S3比，哪一款更推荐呢？平时更多做中&浅烘手冲。

[@WayneShih]

@@DanielWang-h7l 我選Mavo

[@DanielWang-h7l]

@@WayneShih 非常谢谢你，我去吐血购买了，刚好大陆双十二微微打折

[@ASDFBRANDON]

以Pro等級來說，這個價位很划算 ! !

[@user-AMT_C_Dada]

MAVO 幻刺Pro 刀盤那麼大，不上個電鑽充作偽電磨真是太浪費了。

[@WayneShih]

叫他們出個電磨好了

[@ShyJulia]

請問小雨老闆~ 最近想入手 Sunbeam MAX 可是媽媽覺得太貴了... 那如果換 伊萊克斯 極致美味500,一般喝濃縮的話,是可以的嗎~ 謝謝~

[@WayneShih]

看你會不會想要玩其他的東西，伊萊克斯不是一般的58mm口徑系統，周邊配件會稍微比較難找一點點，另外他的標準粉杯也算比較少量的粉杯

[@ShyJulia]

@@WayneShih 請問那 伊萊克斯 可以買 雙份的粉杯嗎？ 因為看到Sunbeam的是三爪的把手，所以也認為配件可能會不好買， 媽媽是先入為主認為 有附磨豆槽的機器沖出來都不喝.. 小雨老闆，我是有在網路上看到二手的 Breville BES920XL 賣 2萬元 只是不知道好不好。

[@李軍-b8z]

講到一半蹦出一個泰摩S3,也太老實了吧!感覺反而是在幫S3無償業配!

[@hunghan13]

來看看老闆到底老實了幾次 9:31 閃亮登場 9:44 超級喜翻 20:23 爽 23:51 叩叩喜翻

[@doctorgarrus9043]

笑死😂

[@WayneShih]

@peanut0829 讚啦！

[@WayneShih]

泰摩給錢！

[@happyeveryday-tilltheend]

😂😂

[@doctorgarrus9043]

这只磨豆机的重量和直径确实对手小的用户不算特别友好的，特别是女生

[@WayneShih]

那你說C60怎麼辦🤣

[@doctorgarrus9043]

@@WayneShih 我在持续抨击..