DIY 1kW HAWT Wind turbine [Part 3] - Casting the stator

[@johncherry108]

I like the way you end each video with "Have Fun!". That's what it's all about, isn't it?

[@RandomHacks]

Yes! It sure is. Have fun! :)

[@alexpmK3]

Looks like this guy is making tremendous progress , i applaud him.

[@JamesBiggar]

Looks like you have a windy location lol. Good to see more people building their own, nice job! Looking forward to seeing more updates

[@RandomHacks]

Hey nice to see you here! Thanks for your comment :)

[@JM-yx1lm]

I bet he bought your plans as that mold looks very much the same as yours.

[@beholder4465]

Yes would like to see the finished product👌🏼

[@jcblll45]

Great DIY project, looking forward to upcoming videos of the wind turbine. The ground up approach is especially interesting. Keep it up!

[@RandomHacks]

Thank you! I will continue this project as soon as I find the much needed time.

[@Nosler1234]

OK I'm really looking forward to the rest of this series. awesome job.

[@RandomHacks]

thank you!

[@premsingh-tj5eo]

Waiting for next part with notifications turned on... I am sure all your subscribers are waiting very eagerly for the grand finale 👍👍👍

[@binusnbayothegrey]

Eagerly waiting

[@petritdemo1183]

very well explanet thankyou for your video can you tell after making the wiering connection and the 6 wires comin out do connect to harvest the power

[@arjankooyman]

How do you calculate the volt and kilowatts at the design stage?

[@scottwood1360]

Love your work and I'm dying to see more

[@kenthiesmeyer6064]

Great job, very professional presentation.

[@RandomHacks]

Thank you for your kind comment.

[@tonylorentzen]

Subscribed for the update videos on the wind turbine :-)

[@tonymuchangi768]

Good vedio what size of magnets did you use?

[@Surferant666]

Where are the air gaps between magnets?

[@vinnyvarghese5432]

I want to built an 100 watt wind generator. Can u suggest me hw many coils nd no of turns per coil, no of magnets nd size of magnet nd coil to be used to produce 100 watt power. Thanks...

[@chandankumar_SQLServerMonitor]

hi , could you please share output volt , watt at rpm statistics ?

[@teslar1]

Great project. I hope you will finish it soon and makes the plans available. I'm happy to pay for them

[@chilikutiafrica1976]

By completely encasing the statue in resin are you not creating heat dissipation problems? Would it help if coils were in contact with aluminium plates instead?

[@ulrichkraus1136]

Hallo! Can you tell me how to connect to the "Gleichrichter" ? I use 1 or 2 or 3 of them? Thank you!

[@barryflowers8071]

cool im ready for the rest thank you

[@treborupp]

Good work. Looks good

[@antoniopacelli]

Hi I have problem understanding circuits. Genuinely saw from start to finish still unable to understand what will turn in this thing to generating swap of currents thus power. I wanna ask you a thingy: wouldn't engraving both magnets and coils in a conductive plate and making the connected coils spin in front of magnets spinning the other way be more easy to accomplish ? ! ? ! Than adding layers of magnets and coils to increasing kw production? [Maybe I saw the second panel with magnets for a second..still I don't get why you cannot make panels of magnets spinning in opposite directions over the coils... it would creating more polarity exchange... no?...the fiber glass is for not creating short circuits? Could pure graphite substituting the coils? I have so many questions and no one to answer]

[@dayanandkasle5469]

What is the mathematics behind turns voltage and speed?

[@ktnch]

what awg wire did you use ?

[@damianonuoha8914]

How can you calculate the voltage and the kilowatts for example if want to build a wind generator like 15,000 to 20,000 kilowatts, how do you calculate the voltage and kilowatts, please i want to know because i have been trying to build my one as well because i don't know the calculation of the voltage and kilowatts that is putting back.

[@nguyenthanhxuan6349]

Xin chào ngài, Hỏi: để tạo ra 1 stator thì làm thế nào để tính được số w, số vòng dây, số nam châm, tôi muốn làm 1 cái 2,5_3kw thì tính toán thế nào, mong ngài hoan hỉ chia sẻ giúp tôi,thankyou!

[@familialopezballesteros2327]

¿Hay otro vídeo donde mostrad el armado y funcionamiento?, saludos desde Argentina

[@henrykomu5764]

72 coil turns for a 1kwh wind turbine, so if i need 20kwh coil i do 1440 turns, and a 10kwh 720 turns?I would like to know how you can determine how much kwh a stator can generate. thanks

[@damianonuoha8914]

Hi RandomHacks i want to if i want to build my 15,000 to 20,000 kilowatts how do I go about it.

[@ratgreen]

Subbed to see part 4 !

[@cianguevarra9764]

waiting for the continuation.. I hope that it will be finished soonest..

[@TheBillythekid2010]

Good video! Have you figured on a switch yet for Delta or Wye? thank for sharing😃

[@RandomHacks]

Thanks man! I really like your channel. My plan is to use relays and some kind of microcontroller to switch the configuration depending on the voltage/wind speed. I have two grid tie inverters that only accept up to 30v so I will use Wye by default and switch to Delta if the voltage exceeds 28v or so just to be safe. Not sure of how well this will work yet.

[@ΑΜΠΑΖΙΣ007]

TheBillytheJack2010

[@JohnnyJayAppleseed]

What about thermal dissipation? How will you cool the stator?

[@Clarks-Adventure]

I've built and live on the power from one of these. Never had a problem with heat in the stator. kzbin.info/www/bejne/bmfHfnp9f7Nob9U&lc=z23bsft4fqihe1nzk04t1aokgp1ihncdakqrcgf2mcovbk0h00410.1537824908590844

[@babuskolazhy1112]

Sir.Good presentation. Can you explain the size of magnets in mm?

[@micklarson536]

It is in the first video he says it in inches then in metric

well done ...

[@arsenioegoytorogiguinat2826]

sir do you have video when you made your rotor? thanks and Godbless

[@RandomHacks]

Hi, thanks for your comment. Check here kzbin.info/www/bejne/n3LaeaOJd9CSa5I

[@vinnyvarghese5432]

Hey nice video. I am also intreasted in doing it. I want to kno hw did u calculated no of turns per coil na also what is the angle for magnets to be placed

[@RandomHacks]

Hi, I didn't make the calcuations, I just followed a very known project that has been replicated by lots of people with great success. Check the video were I made the rotor kzbin.info/aero/PLmjHBAomMtrkiJak8m2aq4RClZyzwqW4J

[@vinnyvarghese5432]

RandomHacks did u completed consteucting generator...? If yes hw is it working...?

[@markspc1]

RandomHacks Nice work and clear narration. I wonder why use 9 coils and 12 magnets vs 12 coils and 12 magnets ? Thank you !

[@michaelmadison883]

where do you start reading about this?

[@RandomHacks]

There is a lot of content all over the internet. Search for Hugh Piggott

[@blade5098]

i assume you finished this. how did it go?

[@ysteingaia3093]

Any progress amigo?

[@scotthenderson4376]

Loved the videos did you do a final on to show the power this thing puts out? Was the cogging noticeable? I'm looking to make something similar but I need a low wind speed powerhouse. Thank you

[@lemontea2065]

What's the weight of the stator? What's the weight of each disc of the rotor with bagnets and resin on it? And what's the total weight of the generator (the rotor and the stator)? Have you tested it yet? If you have, it'd be great to see the results!

[@dragoljubcvarkovski9305]

what about turbine blades, you intend to diy or buy ?

[@RandomHacks]

I want to build them myself, might take some time though as I'm currently busy with other stuff. Thanks for your comment.

[@oscarvasquez2012]

I think if you add metal core in the center of the coils will work better, it will produce better flux.

[@RandomHacks]

It would produce better flux but you also would get cogging which is a bad side effect. Thanks for commenting.

[@GavinFreedomLover]

You best have some big ass blades for that thing if you want anywhere near 1kw, but fair play for trying I am in the same boat , good luck with your project , is it flying yet ?? cheers Gavin

[@RandomHacks]

I think 1kw is reachable but I'm not sure either, there are so many factors involved ... It's the first wind turbine I'm building. It does not fly yet, I don't have much time to work on it unfortunately. Thanks for your comment, I will check out your channel.

[@GavinFreedomLover]

OK DUDE GOOD LUCK I'LL KEEP CHECKING BACK TRY AND GET THE OLD GIRL UP !! PEACE

[@AZAYt-lm1ny]

Nice 👍☝

[@renatosoaresbigio3615]

Bom dia. Você fez testes com este gerador? Gostei muito de sua explanação, mas queria saber mais sobre a montagem final do gerador e também dos resultados dos testes acaso feitos por você. Abraços.

[@LJazz99]

Where is the end video where everything comes together? Please post. Otherwise good job and easy to follow. I will be building my own soon

[@makemykitchen3581]

What is the name of casting Material

[@RandomHacks]

It's polyester resin, commonly known as fiberglass resin

[@tmpinkfloydichooselove7199]

سلام دوست نابغه عزیز لطفاً ضخامت سیم را برایم ارسال کنید خیلی متشکرم

[@achmadasseqqaf362]

this is amazing. but, where is the continue of this video ???

[@RandomHacks]

Sorry I have been so busy lately that I can't find the time right now to finish the turbine but a new video will pop up eventually. I already have quite some money invested in this project so I won't let it die.

[@googleuser6875]

Great stuff! Can't wait for more. Question. What is the rational for 9 coils? Also, will this be a horizontal or vertical axis plant?

[@RandomHacks]

Thank you! It will be a horizontal axis wind turbine.

[@micklarson536]

Why such a heavey rotor? I would think a saw blade would work better abd spin faster.

[@mohaeddawoodturay-williams3762]

where can i subscribe ?

[@behzadhussain11]

Waiting for final video

Olá, não há novidades?

[@mandovibrazrocha2295]

Tudo se renova! Cada instante é novo momento!

[@enzore2420]

IO CNSIGLIEREI la resinatura con il procedimento di vuoto , per eliminare le bolle d'aria ed avitare formazione di condensa nei coil ( O BOBINE ) inoltre aumenta la resistenza del rotore.

[@林楊-d1y]

👍👍👍👍👍👍👍

[@ntomata0002]

Very nice work and well explained! But have you tried to put more magnets between the magnets you already have on the rotor to increase the magnetic field strength? You may get an increase of about 50% to 100% in magnetic field strength, which will result in increased voltage and power.

[@hsjdjjdjskskksksbdjxjdjdjs5805]

Hi glue mane

[@paulwyleciol3459]

nice video but why am I forced to hear this music-shit again and again and again??? It is filthy musical garbage like everywhere you go today,! I'm a composer, it's a pain, no chance to escape

[@RandomHacks]

paul wyleciol Thanks for the feedback. The problem is there isn't a lot of nice royalty-free music around. If you want you can send me some of yours and I can use it on my next video if I like it.

[@kenthiesmeyer6064]

Great job, very professional presentation.

[@teslar1]

Great project. I hope you will finish it soon and makes the plans available. I'm happy to pay for them