Change the Front Turn Signal / Indicator Bulbs and Side Marker Bulbs on a 2007 - 2011 Toyota Camry

Complete instructions on how to change the Front Turn Signal Bulbs or Indicator Bulbs on a Generation 6, 2007 - 2011 Toyota Camry yourself. You can also change the Side Marker bulbs the same way, these are 194 bulbs. This vehicle is a little more complicated than most to change the turn signals bulbs on, but it is definitely something you can do yourself and save money! Doing this job yourself will save you at least $30, maybe up to $60.

[@Got2bComedian]

Thank you so much! Im a 19 year old girl and asked the local auto shop guys to help me (they couldnt figure it out). I just watched this video and went outside with a screwdriver and did it myself in about 5 minutes! THANK YOU! simple clear instructions and now i know for the future thank you

[@dwcoffey]

Fantastic!! You should be very proud of yourself and congratulations on getting it done! Thanks for watching.

[@JohnHarsdorf]

I loved the audio cue where you point out the bulb, thank you for that. Feels like I just won in a game show

[@dwcoffey]

Lol! Thanks John....yea I thought that would at least lighten up an otherwise dull video :) I appreciate you watching and thanks for the comment!

[@OscarFlores-dg6er]

Thank you,Toyota wanted to charge my mom $125 to change the signal bulb. I watched your video paid $7 for the bulbs and replaced it in 10 mins

[@dwcoffey]

Yes!!! You should be proud of yourself and i know that savings feels good in your pocket! That's what I'm talking about.....saving money on these kinds of jobs is so nice. Thank you so much for sharing that with me and other viewers. I really appreciate you watching and commenting....thanks Oscar!

[@charlesmerfeld2988]

Thats gouging.

[@arjunstha463]

same here I fixed it by myself thanks for great 👍

[@dubyadeetango3667]

Thanks for the videos. I changed headlight fixtures yesterday and then went back in today to change the marker bulbs which only took a couple minutes with your help.

[@dwcoffey]

That's great! Thanks for watching!

[@DnvrSysEngr]

You sir are my hero. Took way less than 5 minutes to swap out my turn signal bulb on my 2007 Camry. I had to laugh as the car is nearly 16 years old and that is the first bulb I have had to replace (replacement of headlight does not count).

[@dwcoffey]

Thanks for watching! That's fantastic that you've never had to replace bulbs until now!

[@DaveSteffen]

I just finished changing the bulb in my 13 year old Camry. Took only 5 minutes to finish after watching this video. Thank you Dennis.

[@dwcoffey]

Thanks for watching, Dave! It's always nice to get a job done quickly!

[@e420kill]

I just wanted to say thank you. My front turn signal went out last night and I thought it would be an easy change, but I had no idea how to change it. Then I went to KZbin and found your video. Thanks to your video I changed them. I also watched your other video on how to change the rear turn signal bulbs and it was easy thanks to you. You the man. God bless you.

[@dwcoffey]

Thank you sir!! I'm glad the video helped.....thanks for the blessings and may God bless you also!

[@jamesmelee7976]

Just stumbled on to this and what a relief. A huge thank you sir for not only a clear demonstration of how to execute this process but saving me the trouble of removing the entire front bumper and also save me a $125 bill to the mechanic. I hope you have an awesome day and a wonderful life.

[@dwcoffey]

Thank you so much!! I appreciate you watching and thanks for the really kind comment!

[@user-hc1yh7gt3r]

Hi Dennis,thanks for all the advice. By the way people complain about noisy wipers.I turned the blade around and noise stopped. You probably know that trick.

[@dwcoffey]

Good tip. Sometimes you can wipe them with rubbing alcohol and stop the noise too. Thanks for watching!

[@SportFury1966]

Thanks for the video. The leading edge wheel well fastener is locked in when the slot is horizontal. Rotate it vertically to pull it out. You can tell by the shape of the holes in the clip the pin fits through (round with slots at 12 and 6). Because of this, if you do pry the center pin out when the slot is horizontal, it will probably break or be so distorted and chewed up , it won't stay in place on re-insertion. But they can be tricky to lock back in as they want to twist instead of cleanly rotating. Maybe a slight film of grease on the outer legs and the back hole in the clip would help them turn more easily . I would recommend changing the side marker light while you're in there, to avoid having to do the same job again. It's a separate socket with a small bayonet style bulb (T10, W5W, 194, 198), also amber colored. I also prefer to add dielectric (light bulb) grease to bulb contacts and wearing gloves to keep oils off the bulb glass.

[@dwcoffey]

All great info Tim! Thank you and thanks for watching!

[@abcdefgene]

Really good video. Way to get shots in those hard to reach places while you are doing things. It is the bulb on the end of the housing, but I would point out that the this is the bulb with three wires on the back if you just in there feeling around in the dark(likely). The others have two. Also, as mentioned in the comments, the first clip that you pop is set up to pop out one way, with the slot aligned horizontal. Turn it to vertical once pushed in to lock.

[@dwcoffey]

Thank you for watching!

[@wilkerfamily1379]

Thank you so much for this video. The shop was going to charge my daughter $16 per bulb to replace. I was able to do this and the license plate bulbs in about an hour. Great video and explanation !! Be well.

[@dwcoffey]

Thank you Scott! I appreciate you watching and I'm glad it helped save some money!

[@pirochu666]

Thank you for this well-described video. Having seen all the helpful step-by-step's in advance, I was also able to do this in 5min or so without any surprises/hiccups. Thank you!

[@dwcoffey]

Fantastic! Thanks for watching!

[@batista42875]

Thanks!!!!after I watched your video I was able to change my defective head bulb in less than a minute. You made me save some money, I did not have to go to my mechanic.

[@dwcoffey]

Fantastic!! Thanks for watching and for your feedback. That's what it's all about....saving time and money!

[@brentrobinson6164]

Dennis, my other-half wanted me to let you know your video is great. This afternoon, I told her I’d be a while doing whatever I was doing (important stuff). During that time, she viewed your video, went outside with a screwdriver, flashlight, and a replacement bulb, and did the job. I came in at the end to assist - turning on the lights to test. Thanks.

[@dwcoffey]

That's great Brent! I'm glad the video helped!

[@erwin12388]

Thanks Dennis, I was actually able to remove my left side marker housing and bulb without taking the front bumper apart . I removed the turn signal bulb first. And was able to get a skinny long screwdriver in the top and start the counterclockwise quarter turn of marker housing fixture . Success !

[@dwcoffey]

Always good to have a 'win'! Thanks for watching Bill!

[@jormahuttunen1011]

Thanks Dennis for saving me money and you made a difference in my day .God Bless you.

[@dwcoffey]

Thank you for watching, Jorma! I'm glad the video helped!!

[@Chileno197]

Thanks, that was very helpfull. I tried reaching from the top, it was impossible, then I watch your video. Piece of cake!

[@dwcoffey]

Nice! Thanks for watching, Christian!

[@CamelliaHill]

Great job explaining this, Dennis. My 18 yr old son will have fun changing this bulb for me tomorrow, before inspection. :)

[@dwcoffey]

Thanks Camelia! Sounds like a good learning experience is coming his way... :) I'm sure he will do fine and get past that inspection!

[@MrDonnell328]

The best instructional video I've seen. Thanks for your thorough and precise vid!

[@dwcoffey]

Thank you for watching and commenting Donnell! I appreciate it.

[@carlostorres548]

Perfect! I got my Side Marker Light Bulb replaced in no time. You saved me $50.

[@dwcoffey]

That's great, Carlos! I'm all about saving that hard-earned money! I'm glad you were able to get it done and save some. Thanks for watching!

[@WordPainterWA]

I am glad I watched your video before going to an Auto Store because there is no way I can do this. I slide into a car on ice going 15 mph, which would have only put a dent in the bumper of a metal car! ($3400 repair bill). I usually listen to the radio, yesterday I did not and heard the left signal problem. Now, I plan to phone my Insurance company back and report this because I believe the repair shop either caused or missed this. The headlamps worked when I checked the car out following the accident yet they changed one anyway. I bought the car now, and only have 64,000 miles (maybe) on this car. Your video saved me time and perhaps money in the long term. I subcribed to you just in case there is anything else I need to know. You are very easy to understand and follow.

[@dwcoffey]

Thank you very much for watching and for the sub! I hope you get your car sorted out.

[@rim127]

Excellent step-by-step instructions and video! Thank you Dennis!

[@dwcoffey]

Thank you very much for watching!

[@rogermadsen5972]

Thanks! I was afraid I would have to remove the headlight. Thanks for saving me a lot of time and frustration.

[@dwcoffey]

Thank you Roger! I appreciate you watching and leaving a comment!

[@roberthardenjr28]

Thanks for the instructions. I have learned my thing for the day.

[@dwcoffey]

Thanks for watching Robert! I appreciate it!

[@dwcoffey]

Thanks very much for watching! Please leave comments and share your suggestions. Don't forget to like and share!

[@LukaJebo]

i like your videos! continue like that maybe you will get one of the popular youtubers!! :D i hope :D

[@j3ffsheb]

Thanks for the information! You made it easy to understand 👍

[@daniellesmith2101]

Very awesome! IThanks for sharing your video I tried it myself simple wasn't hard for me to do and I'm a women never thought I will be getting my hands dirty. God bless! Keep up the good work

[@dwcoffey]

Thank you Danielle, may God bless you too! That's awesome that you did it, and you should be very proud of yourself! Thanks

[@armandoquiros6405]

Thanks you DENNIS.... YOU ARE HANDSOME AND PROFESSIONAL.....NICE EXPLAIN.....I CHANGED MY LIGHT SO EASY 😂

[@dwcoffey]

Thank you so much, Armando! I appreciate you watching!

[@jrortiz5150]

Great video, was perfect and it was simple. Make sure bulb is fastened tight before put it back in because if it falls off it’s a B to get out of the light cover.

[@dwcoffey]

Junior, that is a GREAT point! If you drop the bulb into the housing, you probably have to take the light assembly out to remove the bulb. That's not a small job on this car. Thanks very much for watching!

[@jormahuttunen1011]

Thanks Dennis for all your videos , so helpful and friendly instructions. God bless you.

[@dwcoffey]

Thank you so much, Jorma! I appreciate your kind words and thank you for watching!

[@silentthawk]

Watched this video once and was able to do it on the first try. Thanks for taking the time to post this video, Dennis!

[@dwcoffey]

Thanks for watching, Anthony!

[@netafant]

Just crawled under there and changed it. It cost me $5 for 2 bulbs and another $12 for a set of plastic tools that I can use again. Thanks for a great video. I used to have to go to the library and find a service manual before tackling something like this.

[@dwcoffey]

Fantastic, John! Thanks for watching!

[@douglaspreston3703]

Thorough and to the point. Exactly what I needed. Thanks!

[@dwcoffey]

Thanks for watching, Douglas!

[@HealthyLiving.7]

Excellent video and video editing! Thank you for sharing on how to change this bulb.

[@dwcoffey]

Thank you very much for watching Kalel!

[@nelsonchan4842]

Kudos to your awesome instructional video. Shame on Toyota for making a simple bulb change into such a daunting task.

[@dwcoffey]

Thanks for watching, Nelson! I agree....a turn signals bulb should be accessible from the engine compartment and it should only take a minute to change it. They could have done a better job.

[@supaduals]

Thanks heaps! Hubby had the job done in 5 minutes. Just a note though, the bulb in Oz is a bayonet fitting. Cheers!

[@dwcoffey]

Thanks for watching, Julie! Thanks for the info too!

[@thenatnatboy]

Thank you so much for the quick tutorial, I won’t be able to do this quick fix by myself if I didnt see this video

[@dwcoffey]

Thank you for watching! I'm glad it helped!

[@WesFondren]

This was extremely helpful. Thanks so much, man

[@mlangiable]

Thank you Dennis, Sure saved me a lot of hassle

[@dwcoffey]

Thank you for watching, Asif!

[@cclewislee112]

Thanks Dennis. Crystal clear demo

[@dwcoffey]

Thank you very much! I appreciate you watching!

[@45eno]

Thanks for the video. I will be using it soon to replace the indicator bulbs. Weird my low beams(2) and indicators(2) all went out at the same time. Fuse was fine. If it happens again I will check my stereo installation from a year ago.

[@dwcoffey]

That is a strange thing to happen. I wish you well on figuring it out....let me know if I can help! Thanks for watching and commenting!

[@sammycolt1587]

This is the best video for this procedure inside this garbage can called KZbin. Thanks Dennis !!

[@dwcoffey]

Thank you for watching, Sammy!

[@normsan3990]

perfect video demonstration Dennis. Keep up the good work.

[@dwcoffey]

Thank you Norm! I appreciate you watching!

[@mattlawrence5600]

Awesome. Worked like a charm for a 2008Rav4

[@dwcoffey]

Thanks for watching, Matt!

[@jira1889]

Thank You. This procedure also works on 2006 Toyota Avalon, side marker bulb, very hard to turn CCW, was able to get regular pliers on just enough to turn. Thanks Again

[@dwcoffey]

Great, thanks for sharing that! Yes, some of these bulb sockets are very hard to remove...I've had to use pliers to remove a couple of them. Thanks for watching!

[@ericbenjamin8452]

Awesome job thank you very much for posting this. No way would I have ever figured this out on my own, thanks again

[@dwcoffey]

Thanks very much Eric! I'm glad you got it done!!

[@chrissanchez3918]

great video. you did a good job recording the inside area when you stuck your hand in there. My blinker bulb burned out this past weekend on my 07 camry for the first time. When I tried to go in there from the top when I opened my hood I notice there was absolutely no way to get to the bulb, I was wondering how in the world I was going to be able to get to it. This video was very helpful. thanks a lot.

[@dwcoffey]

Thank you so much Chris! I hope you were able to get your bulb replaced.

[@7joanne5]

Chris Sanche

[@GlamCam84]

Chris Sanchez same thing i experience today

[@wildcard9728]

Thanks! The instructions were perfect! Good video

[@dwcoffey]

Thank you very much! I appreciate you watching and thanks for the comment.

[@jeffhibbs4231]

Thanks for taking the time to do this. Big help!

[@dwcoffey]

Thank you for watching, Jeff!

[@madelinebaia4417]

Thank you for stating the type of bulb you need and how to replace turn signal. It will save me money doing it myself. 3457A Awesome

[@dwcoffey]

I'm glad this helped! Thank you for watching, Madeline!

[@investment745]

Thx for the video bro. about to change mines tomorrow. 🙌🏾

[@dwcoffey]

Thank you for watching!

[@BillLennan]

Perfect instructions, thank you!!

[@dwcoffey]

Thank you Bill! I appreciate you watching!

[@basharathbasith5105]

This video really helped. Thank you.

[@dwcoffey]

Thank you for watching!

[@jimferrell9503]

Thank you this is so easy with your instructions

[@dwcoffey]

Thank you for watching and commenting Jim! I appreciate it.

[@OKaFee]

Thanks for this! Worked for my 2012 Corolla

[@dwcoffey]

That's great, I'm glad it helped! Thanks for watching, Mike!

[@cruzergg]

Great video! Very clear and thorough, thanks a ton!

[@dwcoffey]

Thank you very much for watching, Cruz!

[@TonioIII-ol1bb]

I just changed my light today from your video. Thanks a lot for helping !

[@dwcoffey]

Thank you for watching!

[@2xHunchox]

I appreciate the video. I just fixed mine just right now thanks to you!

[@dwcoffey]

Thanks for watching, Christopher!

[@Crashoverride1234]

Thank you so much! I was about to take my bumper off to do this.

[@dwcoffey]

Thanks for watching!

[@luisfigueroa4831]

Thanks a lot! Great video, easy to follow. I saved money and time. Win Win! 👍🏻👍🏻

[@dwcoffey]

Thank you for watching!

[@claudiorojas6764]

Thanks it worked great for me with out removing the top clip. Also the 3457ALL are not Amber. Great video.

[@dwcoffey]

Thank you for watching, Claudio!

[@kennethmartin6158]

this video is a life saver and money saver also thank-you for that information

[@dwcoffey]

Thank you Kenneth! I appreciate you watching and commenting.

[@americanpatriot8402]

Perfect video. Job complete. Thanks!

[@dwcoffey]

Thanks for watching!

[@billburge6764]

Thanks Dennis. Very informative.

[@dwcoffey]

Thank you Bill! I appreciate you watching!

[@billburge6764]

@@dwcoffey have you ever run across the bulb not fitting into the socket? When I pulled the old one out of the socket after rotating it slightly counterclockwise I notice the bulb was broke. I can only guess that part of the socket was melted due to heat from the bulb. Looks like I’ll need to get into the housing of the bulb.

[@dwcoffey]

I have had that happen, where the socket melts a bit and then won't accept the bulb.

[@sbains6176]

Great job. Thank you very much. Made my job much easier.

[@dwcoffey]

Thank you for watching! I'm glad it helped.

[@danielmi8]

Thanks so much for this tutorial. It was pretty easy thanks to your video.

[@dwcoffey]

I'm glad it helped! Thanks for watching, Daniel!

[@sergiomorales9264]

Thank You for this value información

[@dwcoffey]

Thank you for watching, Sergio!

[@ep5738]

This worked perfectly on my 2010 corolla!! Thank you :')

[@dwcoffey]

Great news, I'm glad it helped! Thanks for watching!

[@jbond008]

Thank you just changed the bulb

[@dwcoffey]

Thanks for watching!

[@tylo727]

Thanks Dennis!

[@dwcoffey]

Thank you for watching!

[@murtadhakhakoo2048]

Thanks Dennis! I looked at the rear signal bulb replacement and this was brilliant! Same for the front which made things a lot human. Saved me a lot of hassle and anxiety. Be safe!

[@dwcoffey]

I'm glad this helped! Thanks for watching, Murtadha!

[@jackysmith7313]

Good info. Thank you

[@dwcoffey]

Thank you for watching, Jacky!

[@ayanaanderson3911]

Thank you very informative!

[@dwcoffey]

Thank you for watching and commenting, Ayana!

[@aarongray133]

Thank you!! Super helpful!

[@dwcoffey]

Thank you for watching, Aaron!

[@Alamin311]

Lots of beautiful people are out there, you have all my blessing friend.

[@dwcoffey]

Thank you so much!! I appreciate the blessing and thank you for watching!

[@ClareDejong]

Thank you for your video.

[@dwcoffey]

Thank you very much for watching!

[@jpbless]

Great video. Much appreciated. You saved me $$$$

[@dwcoffey]

Fantastic! Thanks for watching!

[@DarkEvilCookie]

Great Video! helped me out Thanks mister

[@dwcoffey]

Thank for watching sir!!

[@outdriving08]

Great video! I did this the other day on my Camry. Really think Toyota could've design things a bit better! Not an easy side of the road fix if you get a bulb blow on a road trip. Luckily the bulbs seem to last a while.

[@dwcoffey]

Thank you for watching! I agree completely! A little more thought into it on Toyota's part could have surely come up with a way to change a bulb that didn't require removing the fender skirt.

[@outdriving08]

@@dwcoffey I've heard of people converting the bulbs to LEDs, may have to look into that

[@dwcoffey]

I haven't had a chance to look into it, but I think it has to be a great idea. If I do it, I'll make a video on what I find.

[@onetouchgarage4503]

Thank you so much!

[@dwcoffey]

Thanks for watching!

[@armandoquiros6405]

You very welcome.... THANKS 🎖️

[@dwcoffey]

Thanks again!

[@iliaortho]

Cool video. Thanks. Now i know how to do it.

[@dwcoffey]

Fantastic! Thanks very much for watching!

[@mrdisco1]

Really good video

[@dwcoffey]

Thank you very much Paresh. I appreciate you watching!

[@gch8155]

great thank you so much..really helped me..!!

[@dwcoffey]

That's great!! I'm glad it helped. Thank you for watching and commenting!

[@user-uh6ic3et9b]

Thank you very much...good man God bless you

[@dwcoffey]

Thank you too! I appreciate it and God bless you as well! Thanks for watching.

[@rjvagv1]

Perfect and thank you!

[@dwcoffey]

Thanks for watching, Gene!

[@rshutterbug47]

Great Video Thanks

[@dwcoffey]

Thank you for watching!

[@waynezhang549]

Thank you so. Love your video Really help me out.

[@dwcoffey]

Thank you for watching, Mark!

[@shuaizhang5966]

Great video! Thank you! Just for those who have 2011 Toyota Camry, 7440ALL might be your choice. 3457A won't fit my 2011.

[@dwcoffey]

Great info Lloyd! Thanks for sharing!

[@CamelliaHill]

Thanks, Lloyd. My local auto parts store gave me the 7440A bulb for my 2011 Camry as well. I was afraid I was going to have to get the one Dennis recommended. Thanks for sharing.

[@DreamDosage]

Thank you Sir!!

[@dwcoffey]

Thank you for watching, Marx!

[@tonysamaroo3096]

Great video help full...

[@dwcoffey]

Thanks Tony! I appreciate you watching and commenting.

[@kdrhabib356]

Thank you!

[@dwcoffey]

Thank you for watching Habib!

[@marksim3488]

One tip to add. Housing is 2 pieces and has some play. So when you pull out the housing and it doesn’t naturally hang (wiring has tension), you are making the housing a little shorter and the bulb won’t pop right in. If the wiring is tight because you only undid one screw to access the bulb, you’ll have this issue. You have to make sure to push the round part of the housing down (squeeze) and pop the bulb in. This took me a lot of time to figure out since my bulb wouldn’t go all the way down and click in place.

[@dwcoffey]

Thanks for watching, Mark!

[@clarkedale]

Thank you!!

[@dwcoffey]

Thank you Clarke, I appreciate you watching. Thanks for the comment!

[@GlamCam84]

Thank God for this vid

[@dwcoffey]

Thanks Cammi, I'm glad it helped! Thank you for watching!

[@dudeisodumb]

Bless you!

[@dwcoffey]

Thank you!! I appreciate you watching!

[@alhedenstrom5365]

Thank You so much.

[@dwcoffey]

Thank you for watching, Al!

[@Simohamed8410]

Thank you

[@dwcoffey]

Thank you for watching!

[@johnmascarenas]

Thanks brother...

[@dwcoffey]

Thank you for watching, John!