Changing a tire on a backhoe 19.5L-24

Changing a tire on a backhoe 19.5L-24. Had to remove the liquid sealer and install a tube.
Tools used
Tire Hammer (Large)
amzn.to/2yB9R74
Gaither Slide Hammer
amzn.to/2yAUqfm
Dismount & Mount Bar
amzn.to/2KpGSZl
Curved Spoon Bar
amzn.to/2YEPW1y
Vise Grip
amzn.to/30r1y9V
Fishing Tool 24"
amzn.to/2LLM6kE
Quick Air (female air fitting)
amzn.to/2XL1Dsi

[@adamtheodore6250]

he didn't change the tire... he put in a new tube.

[@pokryshkin1973]

He put a tube in a tubeless tire, although tire in such condition must be changed. It's completely worn.

[@edgarb.9176]

One more thing.. I didn't see you bleed out the air trapped between the tire and tube. I used to push back the bead with abar until the tube pushed it closed. If the tire is leaking, the trapped air will escape because the tube will force out the air. Now the tire cold be underinflated...

[@stevenbryant1954]

👍

[@kylejames0851]

Never seen the back bead break so easy…lucky I guess 😅

[@wildlostxr7140]

Hello!! Where can you buy the irons to remove the wheel?

[@ddavid122]

Would you look at that, a backhoe with its own built it lift jack. Made the job easier?

[@nikasumo]

What do you typically charge labor wise to put a new tire on a backhoe like this.

[@jjaguiniga]

I watch all your videos!

[@TripleATireService]

+Jose Juan Aguiñiga thanks for watching

[@TripleATireService]

+Jose Juan Aguiñiga thanks for watching

[@arbez7k]

I bet that tube got pitched. He didn't pre-air it up prior to mounting the bead back on. Pre-airing up the tube inflates it just enough to keep it away from the wheel drop center and the bead of the tire while mounting it. That big flip bar more then likely got the tube which is most likely why the video ended so quick

[@noelduarte4557]

He put baby powder he'll be fine

[@issort44]

like nothing good job bro!

[@Rudrasingh-pv5pf]

Ascenso tyres are one of the best tyres for Back Hoe Loader

[@edgarb.9176]

I don't see that you soap check the entire tire? What was the cause of the leak? Why was there sealer installed? Cords exposed on beads? dirt/debris build up on wheel/bead? Was tire run flat and cords exposed on inner liner? Installing a tube should only be considered a temporary repair. A tubeless tire should remain tubeless. If you cannot properly install a proper repair unit, then it should be replaced. A run flat tire could be dangerous. Migrating leaks are tough to repair, but what was the cause?

[@schandra6985]

Mp no jo moo on mp

[@TripleATireService]

It was a temporary fix until the new tires arrived.

[@jjaguiniga]

You sound like a desk guy... Go to the job sides to see the real world...

[@jpadilla132]

@@jjaguiniga probably a salesman

[@carysherman7956]

How much would u get to do that for someone, changing that tire

[@blakeshirah5493]

whats the baby powder used for? help the tube not to stick?

[@TripleATireService]

+Blake Shirah yes

[@nevertold3091]

Where do you get those for fitness in new jersey?

[@jesusvilla7759]

Chingon vato

[@TripleATireService]

Órale

[@idrive308]

What are you using to fish valve stem

[@TripleATireService]

shop.myerstiresupply.com/ERP2Web49/e2wItemMain.aspx?parentId=00002805

[@محمدالسياغيابوجواد]

روعه

[@TripleATireService]

Thanks

[@ติ๊กการยางเชียงราย]

Hi..

[@renemuro931]

I really don't think is good idea put it a tube on this cain of tires, I rather fix it whit a plug.

[@natefostgaming7359]

I agree or fix it with a bias boot.plus the sealant that he removed from the tire is not environmentally friendly

[@thomasjones1836]

what about a shitty rim leak? most people don't want to buy a new rim

[@shannonmitchell8998]

Plugs don't fix everything.. why does everybody think that

[@latvariansavage9134]

@@shannonmitchell8998 because ppl are fucking idiots and they rather sniff their own shit than to listen to the customer

[@latvariansavage9134]

IF THAT WHAT THE CUSTOMERS WANT THAT IS WHAT THEY GET