Changing Differential Fluid in Hummer H3, GMC Canyon and Chevrolet Colorado

Changing Differential Fluid in Hummer H3
How To Change Differential Oil in Hummer H3, GMC Canyon and Chevrolet Colorado
How To Change Differential Fluid in Hummer H3 Chevrolet Colorado GMC Canyon
How to change differential fluid in truck
#differentialfluid #howtochangefluid #hummerh3 #h3hummer #h3 #gmccanyon #chevroletcolorado
Deals & my Gears on Amazon: www.amazon.com/shop/hummansunson
Disclosure: As an Amazon Associate I earn from qualifying purchases
My Store: lvfree-adventures.creator-spr...
Disclaimer: This video is for entertainment purpose only! Cars and Roads assumes No liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Please consult your qualified auto technician to avoid injury, death, car and property damages.

[@brads5600]

In case anyone is wondering, it’s 24 ft/lbs for the drain plugs

[@SystemCrasher113]

Thanks for that.

[@tomfrantz]

@@SystemCrasher113 Thank you.

[@tomfrantz]

Thank you.

[@JunkTheGreat]

What a great video. No annoying music or speaking just get to it and get done. Thanks!

[@NewRoad]

Thanks 👍

[@LatvjuAvs]

Thank you!

[@CanadaLifeVlogs]

Thank you for your efforts to make this video, very helpful

[@NewRoad]

Glad it was helpful!

[@njstorozuk]

I see you have a brain that exceeds double digit IQ and you ALSO want to help correct everyone else's mistakes with making these videos. I'm impressed. I like that you didn't talk through it, but you included the raw footage while providing simple explanations. Jesus, does that go further than you think. Subscribed.

[@AjeGile]

nice video...

[@NewRoad]

Thanks!

[@NewRoad]

Thank you!

[@InCountry6970]

Nice video, where did you buy the new metal washer gaskets for the drain and fill plugs Part number ???

[@NewRoad]

Thanks, most of my parts I am buying on amazon or on rockauto. Sorry, don't remember part # for washer

[@carolinagutierrez1251]

I have a hummer h3 06 just a question do u change the dif in the back or does it also have one in the front

[@NewRoad]

Yes, here is how to change oil in front diff: kzbin.info/www/bejne/bJbPdYl-oJetmZo

[@HummerH-mo4cs]

Thanks New road for all your time and info on the H3 it has helped us all a lot :). Im about to replace the pinion seal on front diff to drive shaft. after removing the yoke and putting new seal is there a torque on the pinion ( new) crush nut. Or in/lb with tires on I should set it to . Going to count the # of threads before I remove it also. Any tip would be awesome :) Thank You ! ! !

[@NewRoad]

See if this helps (if you have email I can send you pdf for Driveline/Axle Front Drive Axle): FASTENER TIGHTENING SPECIFICATIONS Fastener Tightening Specifications AXLE PRELOAD AND BACKLASH SPECIFICATIONS Axle Preload and Backlash Specifications Application Specification Metric English Differential Carrier Assembly Bearing Cap Bolts 63 N.m 46 lb ft Differential Carrier Assembly Mounting Bracket to Carrier Bolts 155 N.m 114 lb ft Differential Carrier Assembly Mounting Bracket to Frame Bolts 155 N.m 114 lb ft Differential Housing Cover Bolts 30 N.m 22 lb ft Intermediate Shaft Housing Assembly to Axle Housing Bolts 67 N.m 49 lb ft Intermediate Shaft Housing to Outer Housing Bolts 48 N.m 35 lb ft Pinion Shaft Lock Screw/Bolt 25 N.m 18 lb ft Plug, Drain and Fill 32 N.m 24 lb ft Ring Gear Bolts 120 N.m 89 lb ft Third Point Mount Bolt 110 N.m 81 lb ft Application Specification Metric English Backlash 0.08-0.25 mm 0.003-0.010 in Backlash (Preferred) 0.13-0.18 mm 0.005-0.007 in Pinion Bearing Preload, New Bearings 1.7-3.4 N.m 15-30 lb in Pinion Bearing Preload, Used Bearings 1.1-2.3 N.m 10-20 lb in Pinion and Differential Case Bearing Preload, New Bearings 3.4-6.2 N.m 30-55 lb in Pinion and Differential Case Bearing Preload, Used Bearings 2.8-5.1 N.m 25-45 lb in

[@HummerH-mo4cs]

@@NewRoad Great Thank You ! ! . Yes it dose help. I did seeSchwarttzy.com has some of this also, it's all kind of confusing LOL, but I am going to give it a shot right after Christmas. Thanks very much my friend for all your help, and Happy Holidays Brother :) My email is... [e-mail] .. Peace and stay well :)

[@NewRoad]

Visit our Amazon Store (#ad): www.amazon.com/shop/hummansunson

[@maces1405]

How many miles? I just changed my rear differential fluid on my 07 Colorado with 128k miles and it came out looking almost new!

[@NewRoad]

I change every 40k or even often if I offroad in mud and water

[@Humman135]

You have front diff lock?

[@NewRoad]

Yea, I have front and rear - 2010 Adventure package

[@NewRoad]

I have both, front and rear diff locks - it is Adventure package

[@tylervarnon1787]

Does Your h3 have the cast iron diff?

[@NewRoad]

Yes it does. Mine is 2010, GM upgraded few things in latest H3's

[@Humman135]

@@NewRoad what things?

[@NewRoad]

@@Humman135 Some of them for example... 2006 had weaker tie rods, 2008-2010 got cast iron diff cover, and Adventure package (rear and front lockers)...

[@NewRoad]

Yes, it is 2010 and these comes with cast iron

[@carlohedriana5119]

how many miles should you change the differential oil?

[@NewRoad]

It depends how much you offroad. If you don't you can change every 50k I believe.

[@NewRoad]

I change every 50k, not sure what recommendation from GM through

[@tomfrantz]

How much quantity get oil front and rear?

[@NewRoad]

Approximate for front 1.53 quarts and 2.11 quarts for rear, but you have to fill to the level

[@tomfrantz]

@@NewRoad Thank you very much for the fast response. I used Valvoline in those new fancy squeeze packets. I had left over on the front, and needed the rest of the left over from the front for the rear. So the 4 quartz worked easy. So easy to do, and torqued to 24 ft pounds.

[@tomfrantz]

*quarts.