Changing Your pool Lights to LED Lights

[@RyanJohnsonD]

What's a proper voltage for a 6" wide jacuzzi?

[@gordonbombay7237]

Thanks for the great videos! I have the old color changing wheel mechanism by Pentair, but has had standing water in the bulb enclosure for years. Once water enters, are you required to replace the entire light? It also is powered from an Auqualogic panel, would you eliminate the panel control and add an independent new controller and light system, or try to replace back to the panel controller with some new light system?

[@SPL]

THe PAL light system would be good in this case or a Hayward LED system. Usually if light is in there the fixture is compromised. Sounds like a 15-20 year old system.

[@BLOWNSST]

@@SPLI’ve got the same system. Is the PAL the same size fixture as the old wheel style light? And which controller would I need for the PAL?

[@markgraziano759]

My hot tub light trips, the GFI only when I move the dimmer to full capacity. If I stop halfway up, the light works fine and it doesn’t trip the GFI. Any idea what the issue is

[@SPL]

It sounds like the transformer that came with your light needs to upgraded for more amps. I've run into problems like this. Check with the manufacturer manual to see if they have an upgraded transformer.

[@petersalls4083]

I have a very old fiber optic light that no longer works. Do they make a solar light that fits into the small hole?

[@SPL]

In some cases, PAL lights will have something you can use to retrofit it - check that ar their website. But, no solar lights that I know of that fit into that nitch.

[@tastim]

But you CAN just switch out the bulb. You just need a 110v LED rather than a 12v

[@SPL]

Yes, you can change the bulb - if the fixture is not compromised.

[@EatLotsOfCurry]

I had bought a led bulb from Leslie’s and they wouldn’t honor the warranty after it burnt out 6 months later.