Power Steering Kit for Honda K Series Install Guide

[@trdbus4769]

From which engine is the power steering pump in the video?

[@sappk4908]

Really clean and nice

[@TURBOTRISTO]

i love this idea do you make it for right hand drive cars?

[@ChaseBaysTV]

Yes, we do!

[@sdawgwolfe8371]

I’m sure this kit would work on an em2 with a k20 swap? Shit looks sick

[@TylerAnderson27]

Need this for a k series in a e30. would be cool if chase bays could offer it complete or if we could order a kit with custom hose lengths.

[@Sebringsilverr]

Do you know if the Tsx pump uses the same hose size?

[@Reyes_king_]

So u delete the pressure switch sensor?

[@lucascarson6526]

Does anyone know if this would work in a del sol?

[@carsinruin6102]

My power steering rack has 3 hose connections instead of 2. It’s a 95 civic, how does your kit work in that situation?

[@trdbus4769]

You need to plug the first on the left. No need for that

[@carsinruin6102]

@@trdbus4769Man, thank you 🙏

[@trdbus4769]

@@carsinruin6102 no problem, the thread is M12x1, you can use a dedicated flare cap or a d-series flywheel bolt.

[@papaconyo3184]

Would this work on a em2 k swap?

[@amojr3959]

Hi, I have a 99 civic si with a k24a engine and 00 Integra subframe. Would this kit work with my setup?

[@ChaseBaysTV]

Yes!

[@itsBreadley]

does it only work in fwd situations? or is it possible to adapt it to like a s2000 rwd type of setup. does it keep the factory ac?

[@ChaseBaysTV]

This particular kit is designed for civic but may work for S2000 but we couldn't be 100% sure. However on civics it doesn't effect AC

[@jona10silva]

would this work on a manual rack > meaning would this convert a manual EG steering rack into PS rack?

[@ChaseBaysTV]

No, the steering rack are completely different.

[@johnnylor2346]

Looks like it’ll possibly work for the Rsx chassis as well ? If so let me kno !

[@ChaseBaysTV]

We couldn't say for sure, as it was designed to work with Civic and Integra only.

[@corn4854]

Do you need to run ep3 idler/adjustable pulley or will this eliminate the need I will also be running a/c

[@ChaseBaysTV]

The car we installed this on didnt have ac so we aren't sure about that.

[@trevorlocati4341]

What did you guys do for hood clearance? Or what do you do for power steering pump hood clearance on k20a2 in 95eg

[@ChaseBaysTV]

We had no issues with hood clearance.

[@trevorlocati4341]

@@ChaseBaysTV interesting I got my k20a2 in everything fits but don’t have hood clearance over the power steering pump.

[@ChaseBaysTV]

@@trevorlocati4341 I'm guessing you're meaning the reservoir is what is giving you hood clearance issues. Like i stated above we didn't run into that but you can modify the bracket to make it shorter to give you a bit more room.

[@trevorlocati4341]

@@ChaseBaysTV I have the reservoir relocated. The actual pulley and even the top metal of the psp hits as well. So even doing a smaller pulley will not suffice. I would still have to cut the hood.

[@user-hh4hc2lt6e]

Are the fittings universal within hondas, the ones that go into the rack to convert to AN? will this fit 04-08 tsx chassis?

[@ChaseBaysTV]

we aren't sure if they would work on tsx rack.

[@user-hh4hc2lt6e]

@@ChaseBaysTV I’m trying to do a simple power steering delete loop on my rack, with a vented reservoir can in the middle .. any help or suggestions? I’ll be removing the oem fittings and using a thread guesser tool to determine the size soon anyway. I’ll keep it updated.

[@HTSx562]

​@user-hh4hc2lt6e did you ever figure it out what's needed , I want to loop my rack too but what happens to the power steering pressure switch?

[@user-hh4hc2lt6e]

@@HTSx562 in my case i deleted the high and low pressure power steering lines and then 2 adapters to convert to AN fittings and then i used a Chase Bays civic ps delete kit. I made a custom mount by bending/ cutting/ reshaping the existing chase bays bracket. I had bought an extra different bracket. The 92-95 civic and 96-00 civic kits are the same except one has slightly longer lines. I don’t remember which is which but i got the one with longer lines. The mounting was the hardest part tbh. I cut the ps lines at the rack with pipe cutter pliers. And then i could put a socket to remove the remaining line that’s screwed into the rack.. hope that helps. Lmk anything else

[@uses0ap]

Is there a power steering cooler option available for DA Integra / B Series ?

[@ChaseBaysTV]

Not at this time.

[@Michael-kv2im]

Damn that’s clean 👍

[@carlozgonzalez1969]

So will this not work with a 96-00 civic k swapped with a k20a2

[@ChaseBaysTV]

It will not. We are working on a 96-00 Kit.

[@Zosh]

This is fuckin sick!

[@michellentzler3260]

Will this work for an ek k swap with an K20A pump?

[@ChaseBaysTV]

We don't think so.

[@tylermason5520]

👌yes!!!!!!!!

[@omarcabrera1903]

Will this work on k24a

[@ChaseBaysTV]

If the PS pumps are the same. yes.

[@Prince-im5uo]

քʀօʍօֆʍ 😕

[@Mario-et3tp]

Make a kit and sell it

[@ChaseBaysTV]

We do.