CHEAP And EASY - 1 Day PRO STREET Upgrade For The Worst 1957 Chevy

WELDING!
More dang welding! I don't even wanna know how many feet of weld I have layed down and ground off. Today we finish welding in the 1 piece floor and move on to the only unfinished part of the car...
The trunk.
The trunk and wheel tubs have been cut out since I brought the car home. Luckily when I made the deal it came with a set of widened wheel tubs. A little cutting, a little grinding and we got the widened wheel tubs stuffed in. With the leaf springs re-located a HUGE rear will fit under this hotrod.
Pro Street 1957 Chevy, here we come
New Website
www.ddspeedsho...
email me
[e-mail]
Join this channel to get access to perks:
/ @ddspeedshop
Send us your Junk:
DD Speed Shop
Po box 42041
1881 Portage ave
Ferry Road RPO
Winnipeg, Manitoba
R3J 3X7
JSUULQQRAEYUZWGZ
8C5GWIJMWVYLT3CJ
E0JCWD8A3DLZAYHU
5UTGQPVO8KMFMHSC
3EI4KVE8PNUJWSWQ

[@jaymiller2213]

I 100%agree a ratty car with a mint intiror would be wicked on this build

[@lt.columbo5919]

Watching these videos will either inspire a person to "get to work" on their project...or to "just give up" and live vicariously through Dan....I'm going to work on my junk after finishing this vid...Thanks again, Dan...for the inspiration and motivation.

[@DDSpeedShop]

Get out there and start grinding!

[@jasonmorales1846]

You aint lyin!After watching these videos has somewhat inspired me to work on my truck.I need to make a list of what needs to be done vs what I want to do.

[@joefergerson5243]

Because I’m old and disabled now, I live vicariously through Dan!🤟🤟🤟🤟🤟

[@d.pierce.6820]

Dan gets more done after dinner on a work night than I can do in a month...

[@heatherandtimsharp]

@@DDSpeedShopjust solved a problem with grinder b4 coming in to see your vid .😂 Probably not the best but back at it tomorrow.

[@americanfamiliesfirst3747]

If everyone subscribed and thumbs up on the videos there may have been enough funds for paint. Quiet being forgetful people, push that like button. To be honest I'm falling in love with the surf green color because of this car. It's coming together better than a Bob Ross painting.

[@heatherandtimsharp]

I was really looking forward to some primer at least. It would be a huge transformation. All good though 😅

[@ralphhayward5693]

Try looking up a surf green with a dark green roof. I think that is much better than a white roof

[@garywalker7997]

Love your videos. Been working on these old Chevys over 55 years. 57 is my favorite too. Don’t look at the welding as such a chore. Be glad you have the equipment and ability to do it. Keep up the good work.

[@joeharrington595]

Seeing that cool color in the door jams makes me want the car sanded down through the blue to the green. It is gorgeous

[@DDSpeedShop]

Oya. It's a gorgeous color

[@bmacd2112]

Have you considered putting a LED bulb in your old school trouble-light? You'd get brighter light and wouldn't have to worry about the metal cage getting painfully hot.

[@roberttoler3403]

Thats a Excellent idea

[@jcbrtr86]

He got the incandescent trouble light because LED lights will strobe on a video.

[@bmacd2112]

@@jcbrtr86 Some LED will. Not the ones he has on the ceiling or the battery powered, magnetic lights he uses. Not all LED lights do that.

[@jeffmooers2174]

I think Dan wants the HEAT off that incandescent bulb in his Canananda-winter garage!

[@bmacd2112]

@@jeffmooers2174 The pitfalls of living up there in the Great White North! 🥶

[@jfv65]

Consider putting in some dynamat sound dampening before throwing the carpet and seats in. This stuf cuts down on droning noises.

[@rickydonahue1586]

I would drive that car every day Dan. You should be proud of all the progress you've made. It's a neet car.

[@327JohnnySS]

It would be nice if he didn't go with the patina thingy. I know that body work is very time consuming and people will nit pick of the smallest imperfections. Maybe if he traded off some work with a decent body shop/ person as this 57 definitely deserves better than that clear coat over and patina thing.

[@nicklutz61]

You make some interesting choices, but at the end of the day you are saving classic tri-fives that are otherwise basket cases. Love your videos, keep up the hacks and cracks. Can't wait to see the '57 rip a big wheel burnout!

[@d.pierce.6820]

That car had one wheel in the crusher when you got it, and now it's a solid car that will soon be a cool hot rod. I've enjoyed this series as much as any other car you've done so far.

[@wrongwayroger2519]

Same here !!!

[@DDSpeedShop]

Thanks guys!

[@327JohnnySS]

Remember that movie Corvette Summer when he saved their school project from the crusher? Good flick.

[@DavidTorres-tm6ff]

Great job, another one saved. Keep up the good work you do it's inspiring, thanks bro

[@edpoell2876]

WTG Dan getting past the big welding hurdle, you deserve a change of scenery and jobs. Clear coating moss might not work out as planned due to different expansion/contraction rates from temperature changes between the two coatings which will flake away from the sun, wind and precipitation. The car itself now looks solid and worthy of someone's devotion which is a huge leap from the parts bin you brought home. Congratulations on rescuing another nearly scrapped tri-five, the cars you build today will become treasures that will most likely outlive you as cherished centerpieces for future enthusiasts. The folks who will eventually end up with your cars will have your excellent episodes about their car to show the work done that I think would be extra cool.

[@matzrat5006]

Splatter paint looks great for the trunk .

[@user-pe4cf8wr5m]

Dan you've brought that 57 back from the dead, should call it Frankenstein with all those weld scars !!

[@christopheralexander5612]

Please stay enthusiastic about this car. I enjoy anything you do to it. Thank you!

[@greggsvintageworkshop8974]

Such GOOD, GOOD STUFF!!! I LOVE Dan, Danielle and this channel! Can't wait to see all the bolt on's!

[@howardboles34]

I would have scrapped the spare tire well ..looks better ,my opinion, your car , thanks for the videos . Keep up the good work. 😊😊work.

[@divadyrdnal]

Guess I’m old…was in my mid/late twenties before I had a car without some part of it being in primer. Lots of friends had the same primer issues back in the day. BUT we still washed the car, primer and paint! Admittedly did not have to wash it as often as a shiny paint job, but nothing was growing on them either…

[@PaulRhodes420]

Oh good, you're gonna paint it! My favorite color, clear blue sky color with clear flames & custom clear lettering! It's called "use your illusions"! Now that's a good name for this car! ✌️😎💨☮️

[@garyinman5400]

I love it that 57 has come together.

[@ethanhill6150]

You will be able to see alot better, if you put a LED bulb in your extendo-drop light. Just a friendly suggestion. Keep rockin brother! Ta hell with the “haters”!

[@petieg383]

Work light hack: put an LED bulb in it. It won’t get hot and it won’t pop when you drop it! Love these videos.

[@roberteddy4206]

You have done an excellent job on that Dan. I'm proud of you

[@jameschryst7776]

I think you car will be grateful for being rescued from the scrap pile. My first car the 57 Sedan delivery was your cars original color. My first wives mother bought a 61 bubbletop. It is a factory color. It is Seafoam Green. I liked that color. Jim BCC AZ

[@kennethfrenza9462]

Hey Dan, Awesome channel! I've been following for a long time and can't wait for each episode. You remind me of myself in my garage. You really do get a lot done! Thanks for all of the tech help, and fun. Ken

[@scottburns4515]

Love watching your videos. You've gave the 57 a 2nd chance at life on the road. The nomad I can't wait to see hiw it turns out.

[@chapmanracing1206]

I love seeing you save this old hotrod.

[@myVZyoot]

Brilliant, I still love this car. I reckon it's a great idea to clear over your work. You have every reason to show off what you can do...then paint it green. Beautiful car. I loved Danni's (spelling?) remark when you swung the door; "who ARE you?". I nearly busted my gut laughing. Keep him in check girl.

[@dickkapp336]

Sometimes I could just put my fist through the TV .......THANKS DAN !!!!!!........CLEARCOAT THE MOSS ???????

[@Rattygoatgarage]

This is gonna be sick!! I can’t wait, ratty, reliable with nice interior are the best most fun cars!

[@toejam503]

The hardtop looks SO good, so far! +1 on clear coating the top, looks 60s psychedelic with the moss pattern.

[@327JohnnySS]

I disagree, I think that DD speed shop should trade off some work with a body shop/ person. I rather have a ride in primer or mat than this ugly pentena thing that is getting old. I know that body work is frustrating and people will knit pick the smallest imperfections yet his tractor paint tri-5 came out looking decent going down the road. Sorry DD Speed Shop not disrespect yet this 57 deserves better. Keep up the great work and let the lovely comments commence from my comment. Lol .Keep your rubber on the road and your tac in the black. Peace

[@jonpeters2700]

It's coming along well, it's a lot of welding but it's worth it in the end. You're doing a great job fixing up a piece of crap and making it a worthy contender.

[@olpappy9963]

Maybe you should throw a straight axle under it since the budget it busted. You guys should consider coming down to Sick 66 and travel the mother road in October. Shouldn't be too hot. A couple 1/8 mile tracks thrown in for a little fun, nothing too serious. Missouri to New Mexico. Hope to see you guys there!

[@MichaelThompson77]

It’s always good to have multiple projects as you can take a break from one

[@brandongarrigus2450]

By far one of my favorite vehicles that you have built. Can’t wait to see what you do with it.

[@thewyattfletcher]

Your welder's tan is probably Florida beach vacation worthy at this point. Btw, about that hardtop body flex, maybe do a 4 point attached to the rear interior panels? And for goodness sake, put an LED bulb in that drop light. No more arm burner.

[@daleg937]

I'm glad you have a 2dr hardtop, It fits perfectly in your assortment of tri 5's

[@mikeburnett7028]

Wish I had the devotion to a build like you do. I get burned out

[@DDSpeedShop]

I know the feeling!

[@IowaBudgetRCBashers]

I love the Clearcoat idea. I love this car . It looks so tough like it is.

[@SypherF]

i would like to see dd speed shops version of a ratty old truck! love the channel.

[@RAV21-32]

Awesome transformation Dan !! Big job made to look easy.

[@toddkraus5592]

My 55 bel air two door post is my grandma’s old car! She bought it back in 1963! Original 235 straight 6…now 283 with power pac heads! Borg Warner 3 speed over drive. I love driving it! I’ve done a lot myself in my garage and thankfully have a local shop that helps me! I actually love me a 4 door…having raised kids! I’m newly subscribed and have back watched several of your videos! You’re doing a lot of great work! Hello from Missouri and Merry Christmas! 👍🏻👍🏻☕️🎁

[@DDSpeedShop]

That's awesome!

[@toddkraus5592]

Thanks! I did the motor swap in my garage! It’s mostly original paint and interior is showing its age! When I was 5 I thought the wind shield looked like a pretty cool slide! So the dents on the roof and hood are from me! I respect my dad everyday for the spanking! 👍🏻❤️keep grinding!☕️

[@wrongwayroger2519]

​@DDSpeedShop You should rebuild that 283 you've got like this guy's (power pak heads etc.) and put it in the NewmaDD , it's closer to what would've been done for replacement (blown motor, replace 6 cyl.) In the 60's and 70's !!! And they are solid Strong Motors , some more of my internet 2 cents !!! And the 283 was just GM realizing if we bore & stroke the 265 V8=283 better HP more torque , so it would be closer to period correct !!!

[@kevinwilson7919]

From what you started with n what you have now! Just freaking amazing! Very cool car! Just mint!

[@gypsyjayrides6664]

Let Dani embrace her creative side and “patina match” the newish panels. Get some 3M 5200 to glue the hood scoop back down, and some Peruvian Alpacan wool blankets for the seats. Cool in the summer, warm in the winter, and won’t smell. St. Christopher bobble head for the dash.

[@lowbudgetbob1155]

I think you've taken that 57 from a real pile to the start of a really decent driver. Clearcoating the car is a good idea, lock in that patina!

[@russellfuchs7903]

Boy when you get to seam sealing I know it's gonna get rockin'.

[@S2NAZ]

Dan, you look seriously tired. Don’t burn yourself out. People can wait a couple more days why you recharge. Love what you’ve done to that 💩 📦 though 👍🏻👊🏻

[@user-ou5qv8wp1m]

Hey Dan I enjoy watching your show I have learn a lot from you but its going to be hard to watch you clear over the moss anyway keep up the good work cheers from Jerome from Tasmania

[@dickjohnson1158]

I could see the Sense of accomplishment from all of that welding on your face , like what you mentioned about the nut and bolt stuff . Looking real good , keep it up 👍

[@ARKANSASHUBCAP]

Patches! Love your videos I think that Chevy is pretty dang cool-you ought to be pretty dang proud of yourself saving another one from the Crutcher Good job look forward to the end results Keep On Truckin

[@user-rx4yv6nd1y]

Car is looking awesome, I can’t wait to see it running down the road for sure ! My sedan will be getting the wheel tub treatment soon. T5R

[@KennethDahlgren-uh1tz]

Awesome build sir. You've gave me the courage to put a quarter on my 68 el Camino. Thank you hot rod Jesus!

[@mrpurcountry]

Dan sometimes you need to take a break and then come back to the project then you feel fresh to go again. This car could be so cool if you did it good like you did with the convertible since you have white interior this car would look good with a red or deep red body and white top

[@buckeyejim2989]

🗿💨ohhh yeh, red hardtop👍

[@robertcandersonjr9120]

You totally rocked it dude... Love your stuff!

[@cutworm59]

Putting an led light bulb in your droplight will save on getting burned. I definitely love my shirt! It's well made and heavy material. Thanks very kindly!

[@Thomas-fo9zu]

That car has some beautiful lines, I hope to see more of it in the future. You and Dani are a great team. This channel rocks!

[@steelmill]

Danny you know you love welding you cant fool us.I wish I had a dollar for everytime Danny said the words seam sealer on this build.

[@kimberlywilliams9757]

I can't wait to see this car when you're done with it! It's going to be a good one! 😁👍

[@Freyrsforgeandgarage]

Can't wait to see this thing done I know a bit more time and breaks between it's gonna be so rad.

[@johndavidgillespie2619]

Man that thing has got the look for a ratty 57 you got my vote 👍🏻👍🏻

[@jamesmcdowell4473]

Dan, you make my day every time you post a new video. Thanks for that.

[@DDSpeedShop]

Thanks buddy

[@wrongwayroger2519]

I agree waitin on DD Speedshop videos is the highlites of My week !!!

[@leonardfoster6252]

Looking better Dan! Black splatter paint in the trunk look best...

[@jeffstephens7958]

I agree watching Dan I'm wanting to get started on my 79 bronco love what you are doing Dan this car is coming together can't wait

[@doncore513]

I’m living vicariously through Dan. Oh and I like the music.

[@paultremblay2410]

U do awesome work bud she’s coming along nicely keep on keeping on 🤙🏻🤙🏻

[@user-fk6bc2px9j]

Hi Dan I really like the updated content on your channel. I really like that interior design from the sixties it fits the car!

[@doriford4127]

alright glad your clear coating this is badass a big motor and let her rip. reminds me of my first tri 5

[@adrienlevesque4643]

Killer job man!...I hear ya on the crawling stage then suddenly running along with the Project..Amazing that ya have time for a reg job..food or sleep...Ur a Canadian Hero

[@NoWr2Run]

DAN, YOU'RE KILLIN IT, NOTHING LEFT TO SAY,.

[@ricardosmokes]

I am inspired by all your welding for sure. But, as for the clear coat. My vote is get rid of the mold and then clear coat. The mold doesn’t look good in my books.

[@terrencegiordan9812]

Paint it he has enough patina bombs.

[@theodude7608]

You are the Bob Ross of Fabrication! I never read comments why let idiots piss you off after you just watched cool video?

[@kendereszynski109]

If you’re gonna clear over it and keep it ratty…. I’d kinda like to see you use a matte clear this time

[@fruitfarmfords8243]

The lichens will make it matte

[@terrencegiordan9812]

Garbage

[@kevinshowers6477]

Hi Dan. You said before that you like to paint that color green in the future. I think your car was a two-tone. You can see the darker green color on your door post and inside trunk. I seen pictures of the car and that color scheme is awesome. I enjoy your videos.

[@EarlyV8Dude417]

When you fit the spare tire holder, make sure you have enough room to remove the spring shackles, if needed 😀👍

[@perrylankford4269]

We used to take old oil drums and cut them apart to make wheel tubs.. Weren't pretty but they worked and were GHAAAWHD awful strong.

[@barrystoy8222]

Dan the man the floor pan man Guitar done, watch him from Windsor Ontario camera love all your Videos

[@stomper2582]

Cool 57. I believe it’s going to be more solid than your other three. Good job on the mechanical, rust removal and patching as usual. Pin striping would give it the finished look before the matte clear. The old fashioned design type. It’s nice to stand back at the end of the day and admire what you have accomplished. With the welding it’s not as gratifying. Bummer but next stage is gratification work. Another tri five saved from the crusher. 👍

[@michaelgiunta4280]

I did a frame off what I call a rustoration on a 1953 M38A1 jeep so I can definitely understand getting burnt out. I can't wait to see this go down the road. it is going to be awesome.

[@seanmcgillicuddy956]

Loved the hand burner .... Leds can be your friend... 😗 Keep calm and weld on ... All you need is a plug for access to the spring hardware ..You are a card ... cSamazon , Home rCapo , Blowes , etc. ...

[@pugliesesspeedshop]

You consistently impress the hell outta me!! This car is coming along... Keep it up!!

[@jimmiebrown5014]

The car looks real nice Dan you did a good job

[@ralphhayward5693]

I really like your idea to clear coat the old girl. Another testament to DD Hack er.. Speed Shop

[@kenburns7938]

Im only into the video for less than a minute and i think you are doing the best thing for this car by leaving it as is and just clear coat it.After all you did say you wanted the best rattiest tri five

[@DDSpeedShop]

Working at it haha

[@ShadeTreeJay]

I have a 55 two door hardtop carcass off in the woods, you have inspired me to see if it’s salvageable!! Great Work!! Great Video!!👍👍

[@puddleduckist]

It's coming together Dan! The ratty beast is gettin closer to tire 🔥 📛 👩‍🚒 🚒 🧯!!! Rock on 🤘 my Canadian brother from another mother!!!!!

[@larylhuntington5398]

Your videos definitely inspire me. I have learned a TON to do on my 57 210. All I say is PLEASE throw some paint on this one. Take her all the way from junk to jewel. Too much patina these days. I like seeing clean tri fives myself. Please paint it. This one in particular inspires me because this one is in worse shape than mine. So if this gets rebuilt, then there's no reason mine can't. Thanks Dan! keep up the great work bro!

[@Must-Stangingarage]

Hey Dan when you make your conversion on your back door panels put lights in the holes where the window cranks were like in the back of a 60s mustang fastback you can use all kinds of lights like license plate lights or some other kind of light,

[@genecox8579]

I think it's looking brilliant so far Danny can't wait to see it finished

[@aprilhilliard3302]

Awesome build!!! And we agree...no paint or primer...looks totally cool the way it is. Can't wait to see you abusing some tires with this little beasty!

[@25vrd48]

Great HACK job Mr. Hack . 57 is really looking GREAT . Sure is going to be a site to see . Awesome video . $20,000 and a hell of a lot of work and your 57 hardtop would be worth about as much as our 57 hardtop we had when we got married in 1970 and sold in 72 for $225.00 , exactly what I paid for it and it was a great car . Same two-tone blue .

[@matthewbegin3462]

Needs some spot prime with red oxide, then the cheapest clear coat put on dry as a bone . Keep the ratty 57 vibe going while keeping it from deterating.

[@timmygiles9554]

You know I now officially love you,every thing I needed to do to mine you just did! I now know the answers without asking the ?’s. Congratulations big man on making Hot Rod magazine. My only car to make it went to the center spread was my ford escort on accident. Long story!! Good stuff big man!!!! From the mountains of NC,SC,and Georgia good night

[@DDSpeedShop]

Awesome! Get after it

[@andynewell6290]

Like I was saying you are doing a hell of a ❤ job.

[@andynewell6290]

Can't wait to see it finished...

[@ronaldfarmer1208]

This is a good one, looking fine good solid ride your gonna be rolling before long. great job Dan !

[@ArchersGearheadGarage]

looks great. I totally get your logic switching between projects to keep you motivated

[@DDSpeedShop]

Keeps it fresh

[@DooDeeDew]

Yay, I am a happy camper, I got my Somadd T shirt and and Dani's 57 T shirt blowing off the rear two doors today.✌🏻

[@DDSpeedShop]

Oh man. Thanks so much!

[@Johnsmusic416]

I started watching you after I found out you bought the Bricklin, I know you love your Tri-Fives, but looking forward to seeing that Bricklin on the road!!

[@DDSpeedShop]

Should b starting on that soon!

[@kevinwright1551]

Awesome job on getting the weld's in the Tri-5 done. Looking awesome as ever. Keep up the great work.

[@stephenbraun9951]

I love seeing these cars at shows. Even though I’m a Dodge guy, I’ll walk past a pretty car to get to these hot rods to look at the workmanship