Cheap Ebay catch can install (New camera setup too)

[@littleice9731]

You make working on cars look so easy me it takes forever lol

[@TexasHondaChannel]

LITTLE ICE It comes so naturally for some reason but people don’t seem to like my content lately 😕 oh well as long as a few people do then it’s all good haha

[@anthonysalinas6195]

Thank you. I have been trying to figure out a way to do this but couldn't find a good video that explained this.

[@ticojason8868]

I love the video! I've watched many videos trying to get a better understanding of how to install a catch can on a D series and this was the most informative and helpful one! Only thing I still don't understand is which part of the engine goes to which part of the catch can? I have a similar catch can with an "in" and an "out" port where the fittings go to.... Does the Breather go to the "in" fitting on the catch can or the "out" fitting on the catch can? Or does it not matter which one goes where? Just wanna be sure before I do the installation!

[@TexasHondaChannel]

There is multiple ways to hook it up but this is the method I used. You should want the oil vapor in to be lower than the return to intake if doing a recirculating setup. So oil vapor from valve cover on the bottom nipple and top will go back to intake. If you are just running it like me both run into it and your good. The valve cover and the black box under the intake

[@Chris_Paul1]

U guys have some pretty laid back car regulations over there, here in Australia we can’t have a venting catch can, it has to circulate back into the turbo intake. We can’t have atmospheric venting BOVs, it has to be plumb back and no POD filters without an enclosure, it has to be in an Airbox or sucking air outside the engine bay like in a wheel well.

[@TexasHondaChannel]

Yea its pretty chill here where im at in texas. Some places in texas are super strict but small towns like where im at don't have them laws.

[@joelquirino2098]

I do have a Saturn (4banger 😂). My car has a regular PCV hose, but it also has a hose going from the engine to the intake pipe. I don't know if you know anything about this car, but if you do it'd be awesome.

[@elforrestgump]

Please 🙏 do the wiretuck and paint the engine bay of my ef hatchback 🙏🙏🙏

[@TexasHondaChannel]

Hey sorry i haven't been trying to ignore you. Once i get a shop or a garage i wouldn't have a issue doing it for a price.

[@SIRICKO]

I live how you have the option to run it closed or open.

[@TexasHondaChannel]

SI RICKO Yea it’s nice because if i decide I want to run it closed i could do it without buying another unit.

[@speedokoterefinishnetwork4937]

Dude love the canopy !!!

[@TexasHondaChannel]

Speedokote refinish network For sure man and for only $11

[@davidballard6443]

Why wouldn't you run a PCV valve? Wouldn't that cause a vacuum leak? I've used low quality PCV valves and if they don't stick closed at idle it rattles and throws off my fuel trim..

[@AutoXStang]

Adding this to the resto list

[@joelquirino2098]

"I won't get cancer. I'm not in California" That's hilarious. Keep it up 😂

[@KF1]

ahah I'm not the only one. Every time I read one of those labels I think "man I'm glad I don't live in California"

[@mohammadqadri5065]

You didn't drill any holes on the valve cover?

[@djstikzo9431]

Hey guy...awesome video, pretty much the best video on catchcan installation💯🙌

[@Spudstrodamus]

Only thing I dont like about them is the size of the breather port is a little small. I'd you plan to run more hp and more boost they can become a restriction. But perfect for lower home set ups

[@TexasHondaChannel]

james styler Oh failed to mention it comes with different size ports lol

[@Spudstrodamus]

@@TexasHondaChannel I dont mean the ports for the hoses the actual one that vents to the filter

[@TexasHondaChannel]

james styler I’m confused. It comes with larger screw in adapters for the filter for the inlets as well.

[@Spudstrodamus]

@@TexasHondaChannel the neck of the filter is a little smaller it is better when they are larger

[@Tony_860]

Lmaoooo that intro was funny af

[@sinformant]

Lol that intro! You have the hand gestures down perfect. Do you lose boost pressure from the vent on top?

[@TexasHondaChannel]

It don't run on vacuum or anything. Since its just capturing positive crank pressure it just vents it with a filter. Takes the oil out of the vapors and the rest gets vented to Atmosphere. I was running it straight to atmosphere already and it was just leaking oil everywhere so this is a cleaner way to do that lol. Car runs the exact same.

[@sinformant]

@@TexasHondaChannel ah the setup was different on my car. When it went to atmosphere on the one side it would mess with boost. The pcv valve only opened inward. When it broke it bled boost. Hard to explain. But factory it had two one was an inlet from the intake to the valve cover that only let air in when the valve pulled vacuum. The other came out under pressure and ran to the intake side of the turbocharger. The one that broke would spray oil everywhere

[@TexasHondaChannel]

sinformant Ah I see. Yea the rear black box on the civic runs to a pcv valve but they won’t allow any crankcase pressure by unless there is vacuum so I always remove them pcv valves and I don’t recirculate. Too much issues can come from recirculating it and why ruin a perfectly good system that works 🤷🏻‍♂️. Idk if that made sense lol

[@sinformant]

@@TexasHondaChannel yeah I understood. Its bad on the direct injection ecotec engines since there is no injector spraying in the intake. The intake valves get so much built up it is insane. If you googled it you would freak.

[@TexasHondaChannel]

sinformant Yea without a doubt but it will help reduce the amount of deposits

[@throttlefilms]

what would happen if you had catch can setup connected to a pcv valve that wasn't straight through and it needed vacuum?

[@icasualyt8875]

so can you have an open system , breather can, hooked up to the PCV valve? or does it need to be a closed system for the intake manifold vacuum?

[@beanet0wn]

I see what your doing with the panda build back there I used the same method on my zx2 mostly because shipping anything to Alaska cost way too much.

[@cadenmilo8652]

I dont mean to be offtopic but does any of you know a way to log back into an Instagram account..? I stupidly forgot the password. I would love any help you can give me!

[@bowieoscar2984]

@Caden Milo Instablaster =)

[@cadenmilo8652]

@Bowie Oscar Thanks for your reply. I got to the site through google and I'm in the hacking process atm. I see it takes a while so I will reply here later when my account password hopefully is recovered.

[@cadenmilo8652]

@Bowie Oscar it worked and I finally got access to my account again. Im so happy! Thanks so much you saved my account !

[@bowieoscar2984]

@Caden Milo No problem =)

[@user-wr6wo6vr8r]

Would i be about to use a catch can and leave the pcv valve if i use it as a closed system because my car uses a metal pcv valve with threads

[@TexasHondaChannel]

Joshua If you have a closed system yea you can leave pcv my understanding of pcv valves is there needs to be a vacuum source to help open the valve but I guess it wouldn’t be the same in all cases. A close system would be best for people who are worried about emissions or fuel economy

[@pondigrung8197]

Nice, enu. With a good sense of humor while sharing how to do stuff with your honda. Btw can you do a word of encouragement or blessing at the end of your videos just a suggestion tho. Nice video brogad.

[@TexasHondaChannel]

Natch Belltaddeo Well I let god do all the blessings at the end of every video that’s why I say god bless. I think it’s a good gesture but nothing is scripted for this channel ever I feel it makes it more genuine: I have a general idea of what to say but when it comes down to it it’s all improvised. Most people don’t make it to the end of my videos anyways -_-

[@pondigrung8197]

Ohk, I watch the videos but your correct when it reach to the end sometimes I move on to a next video. But I will start watching the video to the very end

[@TexasHondaChannel]

Natch Belltaddeo Oh appreciate it. Some times I say the outer early then keep taking because adhd lol 😂 and nothing is scripted

[@SlowDelSol]

Did the rubber hose come with the kit?

[@TexasHondaChannel]

I mentioned it in the video. For best results don't skip around the video you might miss something small or major. I bought the black rubber hose separate but the blue hose came with the kit.

[@08streetlegal]

Wow is this video shot with the GoPro. It came out looking good !! Having first person view is going to make videos more interesting see you in the next one

[@TexasHondaChannel]

Jonathan tube For sure and it’s a hero 7 silver and I love it! 4K quality 😎

[@codysmith3857]

Funny man I letterly have the same one but purple and works super good with the steel wool in it and it gets junked over time but very good product would recommend to friend's and keep up the good work and hope all is well with you and your family and keep it 💯💯💯

[@TexasHondaChannel]

Thank you for your support as always and yea when it gets gunked up just whip out some brake clean :D

[@codysmith3857]

@@TexasHondaChannel That's very true buddy on the brake clean works wonders and hope all is well with you and keep living life to the fullest and hope you have a great day!!!!!

[@XilenTMedia]

Hey man! Great vid, just a few questions, what size are the hose you used and that black thing was that a PCV valve you inserted?

[@kidnextdxxr]

Not pcv valve but a middle piece connector to insert it into the black box

[@nicksmith7314]

Great link I will being getting myself one

[@S_Ms3T3D]

What did you do with the black box??

[@kidrobjuheard]

Hey whats you review would you recommend that catch can for a basic all motor setup

[@CEA-zw2xt]

Did you use the original fitting from the black pcv box or did you get a different fitting? If so which one? Thanks!

[@TexasHondaChannel]

360CEA725 Original one that came stock on the black box.

[@ticojason8868]

Block Plug Adapter Breather Catch Can Fitting Fits Honda Acura D Series D16

[@ticojason8868]

You can copy and paste that on eBay.... There's a fitting they sell that deletes the black box and pcv completely and turns the hole in the block that the black box goes into into a 10AN fitting that you run directly to the catch can

[@outkastgarage868]

Looking good

[@TexasHondaChannel]

Thanks man!

[@centraltexascivic7299]

Quick question are you any where near Austin?

[@s2kderick]

What size hose did you use for the fitting?

[@TexasHondaChannel]

Took the fittings to the parts store and put on whatever fit. Im not sure on hose sizes.

[@marcgonzales9337]

What does blocking off the holes on intake mani do?

[@lurice0]

People on hondaTech say you did this wrong because there's no fresh air to the crankcase.

[@spp6849]

you dont want air in there. both spots vent outwards, not in. youre probably thinking about the valve cover vent, which again vents out into the intake pipe, while the original pcv one vents to the manifold. he doesnt have to care though because its going to vent to atmosphere via the filter on top. it just creates less of an oily mess like he pointed about before the install. if you care to keep your fumes for emissions or mpg reasons, you would do the opposite by plugging up the filter spot and only have the pcv location vent into the can and out the can into the manifold and have the valve cover one vent to the intake pipe or atmosphere. the real messy one is the one with the pcv. you can just put the filter on the valve cover to make less of a mess and have the pcv the only thing going to the can. also consider that he's doing a race setup so it wont be smart to push high pressure into the intake piping while having the valve cover venting into said pipe. you'll blow out basically all your valve cover gaskets and even other important sealing gaskets if you did the oem routing.

[@d.collier_8280]

What turbo kit did you purchase?

[@user-iy5tq6xj6k]

Do those eBay parts even work I heard there not realiable

[@americanflare5215]

Good looks

[@goatsdime]

I have a d16z6 and I put a filter on that breather but it leaks oil out of it my car is a non turbo can I do this as well

[@jose-fd7gh]

My car is doing the same exact thing ,and I'm looking for the same answer as you

[@rendiix4269]

Sup man i need a lil help my d16y8 when its hot , on stops or red lights when i stop the car rpms drop low like 500 and oil light blinks a lil like 2 seconds then rpms drop up again like 800 and work normal again only does tht on stops i already change the oil presure switch and cant fix tht

[@beans4269]

Low oil pressure?

[@rendiix4269]

@@beans4269 it was a new oil pressure sensor tht wasnt original from honda i installed back the oem one and worked fine

[@kidnextdxxr]

Clean ur iacv or make sure u have enough coolant. If that don’t work mess with the idler screw counter clockwise for higher idle.

[@thaAzian1401]

Hey Texas honda I bought my civic It ain't have tha original pcv What can I use in tha black box instead of pcv

[@ticojason8868]

I know this is late but there's a fitting that bolts into the spot the black box was in... It's actually a delete kit that turns it into a 10AN fitting and gets rid of the box and pcv completely and you run a line straight from the block to the catch can.... Got it on eBay for 34 bucks! It won't let me copy the link but the description is: Block Plug Adapter Breather Catch Can Fitting Fits Honda Acura D Series D16

[@thaAzian1401]

I had anutta question What bracket did u use to replace ac compressor I tried looking online but can't seem to find anything Appreciate tha help earlier I just ordered that an fittings piece on ebay

[@shaunanthony9421]

1st!!!! Another great video!

[@TexasHondaChannel]

Thanks and appreciate it.

[@MM-iu1xt]

Where to buy the plastic piece that replaces the pvc valve?

[@Chore_Boy]

I actually saw a pack of adapters in the air filter isle at the auto store. It was next to the Spectre filters.

[@Chore_Boy]

I actually drilled out the end of my old pcv valve and removed the pintle inside, to dave me from buying the whole box and not knowing if there is one that even fits..

[@Germanmuscle]

Hey guys chrisfix here lol

[@TexasHondaChannel]

Figured you would like that. He has good content.

[@boiiiyt6957]

Lmaoooo 😂 great vid👍💪👍

[@TexasHondaChannel]

Thanks i figured its okay to have humor sometimes lol

[@urannihector3741]

Y'all in Killeen

[@valeriesanchez3074]

Lol link is broken

[@TexasHondaChannel]

Go figure -_- the price probably went up anyways due to you know who. I just typed on Catch can in eBay search.

[@someguyto4675]

@@TexasHondaChannel So on a 1.5 liter you run a hose from the valve cover and the original black box to the oil catch can and it works just fine and does that eliminate the pvc valve?

[@Watashi_wa77]

nice thanks happy new year