CHEAP HIGH AIRFLOW PC CASE? - Tecware Nexus Air Review

[@SUSHI4lyf]

Thank you for doing this review for the Air. I don't know why no other Asian reviewer has done this yet considering airflow cases are the in thing now and this is one of the best value for money airflow cases out now. The bigger reviewers are lousy.

[@mmggyy]

I currently have this exact case (with the rubber grommets/TG version) and I have no words to express how amazing this chassis is. The price depends on where you live, I probably got lucky with the price drop the shop offered. I mean, for one months of usage and it being only placed below my small office table with a wooden plank below top, I can say it has a really good airflow despite its tempting price which I bought for 45USD. Plus, I have no problems with the dust build-up considering I placed it below under my table with the wooden plank at the bottom of it. It also has room for upgradability; 330mm maximum GPU space, vertical gpu mounting support, 240-360mm AIO mount, ATX, and it's pretty big. I would rate the case an overall of 9.8/10. Greatness synced with great expenses.

[@ZXTech]

Nice

[@rudolfnavaro]

thanks for this quality review, this video is really well made. can't believe that you don't have more views/subscribers dude, keep up the work :D

[@1111ainsley]

Just wanna say thanks for this review. Hope your channel grows massively!

[@ZXTech]

No problems!

[@lonegreywolfpl5193]

The thing is, I emailed Tecware support last month and requested for the manual for this case to be provided on the official website. They replied that they would do it but it still not provided on their website.

[@ZXTech]

I will inquire with their rep

[@lonegreywolfpl5193]

@@ZXTech Tecware finally added the manual for Nexus Air on their website.

[@amirulaiman8673]

this case is so good that it ran out of stock everywhere, I can't even buy one xD

[@ZXTech]

Not as bad as GPUs tho :P

[@mustakimkamaruzaman9715]

Many stock bro VXC have..the pc case out of stock Thermaltake The Tower 900..very difficult to get..if buy from Thermaltake web site you need to pay 2 times than the original price because of tax so expansive..in my country Tecware VXC so many stocks..But Thermaltake The Tower 900 no stock..

[@mustakimkamaruzaman9715]

@@ZXTech True..GPU for the stock all over the world have limited stock..if have they seller sell it double price than original price..Factory cannot produce enough GPU all over the world they not enough the raw material for chip producing in the Covid situation now...Also who is mining crypto currency alreay buy all the stock too many just want use for mining..

[@Oozaru85]

They probably use these multicolored cables because they want to get rid of old parts. Kinda hard to believe they do it for cost reasons, since fully sleeved cables aren't that much more costly. But hey, you can always use black insulation tape and sleeve the unsleeved parts yourself.

[@theravenvlogz7345]

how's the metal sheet thickness used in this case? isn't it flimsy or feels too cheap?

[@ZXTech]

Is fine, not brilliant, but don’t wobble when fully assembled

[@theravenvlogz7345]

@@ZXTech thanks for the great review, i'm really interested on this case looks sleek

[@theravenvlogz7345]

@@ZXTech lian li lancool 215 or this nexus air?

[@Cyan2003]

will the 4080 or a 7900xt fit in that case?

[@ChaosBuck1]

Can this case support Artic liquid freezer top mount?

[@TheIkkooo]

Is it fit to put liquid cooler on the front of this case?

[@speedburger5410]

Does it have proper cutouts in front for 140mm fans? I know some cases have support for 140mm fans but the opening is only for 120mm fans.

[@Earthcello_RL]

The black and white version looks really cool

[@ZXTech]

yea!

[@jeshufertv9324]

Hello good night. I have a question about this case includes, support for vertical GPU? Thanks

[@ZXTech]

Nope

[@melvs9705]

it does just get a nexus air vertical mounting kit tecware sell it separately

[@mrdzoul]

Been looking for a new case. Well this is it then. Nice vid bro 👍🏼

[@ZXTech]

Thx

[@maddymuhat8079]

which is better this or the tecware forge m? I like the forge m because of the hinged side door panel but I like more the aesthetic of this since its more sleeker and minimalist. what you think?

[@ZXTech]

Forge M feels more premium but this is bigger and has more airflow

[@cmdrnick]

can this case fit an ASUS ROG B450-F ??

[@MASViper]

The one thing I like about this case is this is the only cheap case that has a great airflow but has a steel panel version.

[@ZXTech]

Sounds good!

[@lonegreywolfpl5193]

Not to mention 4 fans. 3 of them Orbis.

[@MASViper]

@@lonegreywolfpl5193 BTW, can this fit 3 140mm fan in the front? Just wandering.

[@lonegreywolfpl5193]

@@MASViper it can fit 3x 120mm fans and only 2x 140mm fans in the front. In my current configuration, I'm using the included 3x 120mm fans in front.

[@MASViper]

@@lonegreywolfpl5193 What about PSU length?

[@handyputra4971]

Hello greetings from Indonesia, I bought this case, it just got delivered today, how do you exactly remove the tempered glass panel? Do you have to loose the screw in the rear? Thanks

[@ZXTech]

yes then pull to the left gently and out!

[@hons5703]

what about the dust build up ? im looking for cases with front dust filters but i would like to know if this is good ? is there any way i can buy a different filter and just mount it at the front of the panel?

[@ZXTech]

It has filters, but I didn't use it long enough to know about it's build up

[@KiKeebs]

Are the included case fans use molex or pwm connectors?

[@draftatlas5553]

Both.

[@chesterbelleza5556]

how about MATX it will fit?

[@ZXTech]

Yea

[@Yourboysito]

Hye wanna ask which is better for overall quality between tecware forge m or nexus air?

[@ZXTech]

Forge

[@Yourboysito]

@@ZXTech thanks

[@muammarbasalamah6943]

Is the free fan good enough? Or should i change them

[@ZXTech]

Good enough

[@kirktimajo]

can a trifan gpu fit?

[@vern5648]

would the asus h81mk mb work on this? as in would it look too small?

[@ZXTech]

small looks is all in the mind

[@dododoyt]

this or tecware nexus c is better?

[@ZXTech]

this

[@danzielcempron2589]

Nexus air tg vs. Forge tg? What case is better at airflow?

[@ZXTech]

Forge is bigger

[@dedesaptoadi3418]

where you get the cable grommet?

[@daemon3spade]

Can compare thermals with VXR?

[@ZXTech]

Don't have a vxr mate

[@joan-cobyjusteendaruca6009]

i wanna buy a gaming pc but i wanna find like a 6 gb ram cheap one i cant find

[@ZXTech]

Build it with used pc parts

[@joan-cobyjusteendaruca6009]

@@ZXTech i cant i dont have pc parts i was planning to buy laptop or pc but its expensive can you find me a gaming pc please thank you

[@Ad1e.]

does it have a front magnetic dust filter?

[@ZXTech]

It has some mesh but that's about it tyler

[@shankaranand48]

power supply shroud, magnetic dust filter, tempered glass, 4 pre-installed fans, full sized atx case for 60 bux? damn

[@ZXTech]

Pretty impressive

[@hadiffnazhan862]

$40 in malaysia

[@nahtutorial1849]

45$ in Indonesia

[@jackasad2180]

is this support atx motherboard?

[@originalspudster819]

Yes. The Tecware Nexus Air does support ATX motherboards.

[@katailham8032]

Can i put and 360mm aio at the front?

[@katailham8032]

And a 330 gpu. Will it fit?

[@ZXTech]

GPU yea, aio might be tight

[@andyt9132]

Do you think this case is a good alternative to Tecware's Alpha TG ATX? I actually really want the Alpha TG ATX but it's sold out everywhere in Malaysia. Only the M-ATX version is in stock. I guess if it doesn't get restocked by the time I'm ready to build, I'll go with the Nexus Air instead

[@ZXTech]

Yeah it should be a good alternative, seems like the features are the same. It all depends if you like the look though

[@JohnDoe-bz4yl]

Building a gaming PC for a friend and looking at this case

[@ZXTech]

its good

[@Al_paCheeno]

any idea if the NZXT Kraken X73 would fit in this case? - Manila temp sends their regards.

[@ZXTech]

Yeap

[@katailham8032]

@@ZXTech in front?

[@Kays_Customs]

Forge S is just 15$ more and comes with rgb fans and remote and meshify C front facade

[@fabiarrahman2248]

Looks really great, sad that case not available in my country

[@mrdjent8856]

whoa.hope you review more asia brand case.

[@ZXTech]

I have and I will

[@mirsyad9828]

What about the temp? And the acoustics?

[@ZXTech]

Tested an ancient i74930k in there with a tower cooler. Ran at a cool 70-80 underload, with the fans limited to a max 70%

[@mirsyad9828]

@@ZXTech so, 75 on avg? That's pretty nice

[@fabiarrahman2248]

This case actually pretty similar to Lian Li 215... wow

[@clarenceclemente1303]

The standoffs for the one I bought were absolutely not preinstalled. I had to figure out how to poke a hole for the three rightmost standoffs for my ATX motherboard. Wasn't fun.

[@ZXTech]

Damn...... Did you contact tecware support?

[@quasar8744]

Where's temperature bro,

[@ZXTech]

Other comment

[@quasar8744]

How you compare this to Lian li 215?

[@apit22]

@@quasar8744 dont compare this product with the premium name like Lian Li..

[@quasar8744]

@@apit22 yeah of course I know😂

[@vanhohenheim3765]

Love your video

[@ZXTech]

Thanks man

[@lonegreywolfpl5193]

Thanks for reviewing this case, I think you're the first ever KZbinr to review it.

[@ZXTech]

No problems man happy to help

[@MrVampiah]

Good music taste bro

[@alexwong-s7s]

Didn't know Tecware does sell their products in US.

[@ZXTech]

I don't think they do?

[@Awesomejojo]

Back in business

[@ZXTech]

Back babyyyy!

[@apit22]

just ordered one, before deciding to choose nexus air i compared this case with invasion h2.

[@ZXTech]

Nice

[@apit22]

@@ZXTech yeah, from what i see is invasion h2 is so tempting at the hinged door but seems lack of space for mounting aio on top.. not as much clearance as in tecware nexus air case.. but i also like a simple minimalist look of the pc case. so i chose tecware nexus air for my case upgrade

[@gyxter]

@@apit22 hi planning to buy this case as well because of the top clearance. May I know what mobo form factor you have? is it in ATX? I got an msi b450 tomahawk max which i think should fit perfectly and still have AIO clearance on top.

[@apit22]

@@gyxter hi there, i got a micro ATX form factor motherboard but this case will fit any ATX form factor motherboard and you will still have plenty of clearance to mount the aio radiator on top (supports up to 280mm radiator based on specs at website, www.tecware.co/nexusair

[@gyxter]

@@apit22 thnx for confirming. Yeah did see the specs and the pics and judging from the mobo mount there is more than enough space on the top.

[@giulianoschillaci7112]

Awkward position for buttons...

[@bod4gaming609]

All reviewer on youtube...No one reviewer do these on Nexus Air. 1.open front side 😭 2. explain radiator and position 😭

[@ZXTech]

You now they list the radiator support on their website right...

[@peepopie5005]

Welp thats it, this is what im going for

[@ZXTech]

Nice, glad to have helped

[@kylieanneking2606]

Can you review the new Tecware Quad Cube? Here's the link www.tecware.co/quad

[@miguellorenzosantos8544]

cooler master nr600? haha

[@ZXTech]

If I can get one

[@Juani_lol]

I found this case for $30 :0000

[@ZXTech]

Nice

[@rakhajatindra2723]

Gg

[@yuji6385]

best case 👍

[@AngryBanan4]

does it have a front magnetic dust filter?

[@ZXTech]

Mesh filter only