CHEAP karcher snow foam Lance tested with shocking results!

[@epicautomotivedetailing]

At £15 is this too cheap for you? Let me know in the comments whether you would go for one of these nozzles?

[@stubee1744]

Watched your vid then picked up one but was totally different from foam yours put out recommend infinity wax power foam 👍

[@nigellewis8461]

no

[@MrRusty1trumbone]

Spot on Dave, this is an expensive hobby and you require quite a few bits. I started out with the Karcher snow foam gun and it did the job.

[@epicautomotivedetailing]

Hello mate thank you. For £15 it's as good as your going to get for the money. Use it once a month and it works out at just over £1 per use so it's a bargain

[@icon7409]

Dude you put the other small uk Detailing channels to shame. You keep it simple. You make content fun to watch. Your the best

[@epicautomotivedetailing]

Thanks. I do like some of the channels

[@nickname1812]

I have been using one of these for years with a 12 year old 'top end' upright Karcher. Must use decent foam. So good I see it turned a Fiat 500 into an Abarth 595. Amazing.

[@epicautomotivedetailing]

Thanks for watching 👍

[@conned]

Cheap n very good! Been using it more than my MJJC

[@Piner5074]

Been really happy with mine since buying it alongside my K4, certainly foams up well enough with 1:5 ratio with Autoglyms Polar Blast on full power. But I’ve since realised it’s not about the volume of foam, it’s more about the cleaning power, so now I’ve switched to Bilt Hamber, which is a lot less foamy but a lot more efficient at shifting the dirt, but I intend to keep it, as it does a great job for the price, my singular moan is it only just holds enough if you’ve got it on full power to cover a car… but that’s it. Less is more in terms of value for me.

[@epicautomotivedetailing]

Very good point mate. I'm testing the k7 now so giving the cannon another crack next week

[@calvins48]

So it's 600ml. How much Polar Blast do you pour in and then how much water? Thanks.

[@baileychow5226]

@@calvins48 100ml foam then 500ml water, I use the same foam and gun setting as OP, and it gives a nice thick foam with just enough to cover 1 car

[@Gareth.W]

I picked one of these up today and will be testing it out tomorrow, so this video was great.

[@epicautomotivedetailing]

Nice one. Its not the thickest foam cannon out there but its ok

[@rubiolouis]

Man, that's a beautiful defender!, the color magnificent!! I felt in love

[@epicautomotivedetailing]

1 of 1 that model. Most expensive one in UK

[@nazurah7]

I've been using this with my K1 and thr Turtle Wax Ice Snow Foam Wash. They foam up quite good. 👍👍

[@epicautomotivedetailing]

To be honest i havent tried that snow foam wash yet. My have to give it a go

[@bulldogmushrooms6364]

Dude your videos are incredible 👌. How on earth have you only managed 3500 subscribers is beyond me. And thank you for doing the low foam test and actually making it interesting. I've watched some real boring videos recently on this.

[@epicautomotivedetailing]

Thanks mate. Can't say I've watched any other videos on this myself. I just pick a topic or a product and go out and film it my way

[@PurineOFW]

81.5k now, 3 years later

[@makingcookingfixing]

I just bought a Karcher K7 and bought the same foam lance you show here. I used 100% soap inside (Avalanche Autofinesse) and it was coming out more runnier than yours shown here... I am disappointed in this foam gun, thinking that the Karcher is top of the line brand (they know what they're doing?) I thought I was going to get crazy thick foam, and I purposely did not dilute the soap. Thanks

[@epicautomotivedetailing]

To be honest I'd go for a mjjc if you don't have huge budget. In my next karcher K2 video which is live next week your see how good the foam is 👌

[@11CarCarl11]

Great video I love watching your content for inspiration. I actually work for a hygiene supply company that is also a karcher centre and just wanted to point out that you can make the fj6 compatible with the other karcher models with the "adapter M" that converts the old style trigger gun to fit the new style attachments, just incase anyone watching this has an older karcher

[@epicautomotivedetailing]

Thanks so much that's very kind of you. Thats a great tip thanks for sharing 🙏

[@AlfaGiuliaQV]

I am a weekend warrior with a K5 and this lance i got with the purchase. I also have the Autoglym lance, and they are worlds apart!. The Kärcher lance is way too uneconomical to use, since it consumes heaps of product to even get a hint of foaminess, while the Ag needs next to nothing in ways of snow foam detergent to give a thick consistent blanket of foam. The spray pattern adjustment is also knife sharp, and don´t get me started on the quality feel, but you knew that :)

[@epicautomotivedetailing]

I desperately want to try the Autoglym polar range. It's on my Xmas list 😃

[@briannewton3535]

I have the K3.500 I dunno if this is a good machine, had it for a number of years with little use. I have a Transit Custom van. Hand washing aimt an option for me now. Gonna get this little gadget. Thanks for the no nonsense info. And the confidence that this will be okay for me, and it has only gone up less than three quid since you reviewed it.

[@haroonkhan5933]

Dave I hope this reaches you and if you could have a quick read please; I was due to open a mobile valeting business this winter, but I’ve totally sacked it off due to saturation in the market. There’s literally a new mobile detailing start up every day here, and the prices have been driven to the ground by the new start ups out beating each other on price. Maintenence washes start at £20 including snow foam + 2 bucket method, full valet inc wet vac for £50, and £100 for a full decontamination and single stage machine polish and ceramic protection. Quality must be like dogs bollocks as it’s a rushed job then onto the next, but it’s sad to say this recent influx of so called mobile detailers have killed the market here in West Yorkshire. Is anyone else feeling the same where they live?

[@epicautomotivedetailing]

Man that sucks. So due to the virus having an impact I've noticed a huge amount of mobile valeters start-up. So the competition is getting tough. So now you have to be smart and come up with something that makes you different to the rest. I live just outside London which is one of the remaining surviving areas so it's not affected us here and in fact I've stopped taking on clients now because I can't have staff with me and fully booked. I go for clients who expect the very best so the VIP, celebrity clients as they never give me grief

[@vasili1207]

How many of them start ups are natives .... spend your money with morals don't support illegal workers

[@garrydan94]

Karcher k5, one of these. 2 cars both get washed twice a month, 1 deep clean 1 maintenance clean, I think it'll do me nicely

[@banchy9126]

Hi have just bought a jetwash called a wesco its an 18v 73psi and it's quite good if you have no access to electricity I would definitely recommend it

[@epicautomotivedetailing]

Nice one 👌

[@banchy9126]

@@epicautomotivedetailing its powerful enough to remove years of dirt of concrete

[@alternativeperception6949]

I have used one of these with Carpro reset through it via the cheapest Karcher pressure washer available in the UK and on highest foam setting it does great . I will be trying it with actual snow foam from Carpro soon so im expecting it to be lots better

[@epicautomotivedetailing]

Nice one, I got mjjc snow foam cannon and it's great value

[@alternativeperception6949]

@@epicautomotivedetailing I want to try the Gtechniq W4 citrus snow foam also

[@SidewaysKris]

I bought one for my K7 Full Control + and it works quite well, I use Autobrite Direct Magifoam Custard and get a lot thicker foam than that with only a 10:1 mix ratio. I generally use a better snow foam lance with a quick release gun but the Karcher Lance is quite good 👌

[@epicautomotivedetailing]

Nice one Kris haven't tried that yet. Looking into doing more snow foam videos. Definitely want to try the colourful ones at somepoint

[@davidedge630]

I started out with exactly the same one as it came with the pressure washer. For me it was perfectly adequate but wanted something better so plunged for a proper snow foam cannon. The proper snow foam cannon only really shines through in the winter due to the foam being thicker and allowed to sit on the car that bit longer Great video - I look forward to what is coming next

[@epicautomotivedetailing]

Thanks mate I've actually been filming loads but had no time to edit so hopefully this weekend I'll be back on it

[@darren4428]

Have to say I've used this foam lance and get better results than you've shown. I get thick foam every time, perhaps I use more solution than you would? Good vid though

[@epicautomotivedetailing]

Hello, yes so many foams out there they all different. I got this for another week so may film more tests with a thicker mix. Thanks for watching mate

[@patrickhowell5578]

It came free with the K4 I have, no complaints here, does a good job. We have 2 cars, so I wish the bottle was bigger, it easily does one car, but a bit just too small to do 2, but otherwise a decent cannon.

[@floatybyboaty]

Just purchased the K4 Full Kit so will play until my hearts content.

[@epicautomotivedetailing]

Nice one enjoy it 👏

[@philbloomer1]

Id say if I'm on a budget then yep, however was given an infinity wax extra foam cannon as a birthday present. No doubt does the job well enough, another top notch effort.

[@epicautomotivedetailing]

I've heard good things about infinity wax. There on my list of products to try

[@philbloomer1]

I'd suggest trying diablo wax, PTFE based but the beading and durability, os impressive.

[@Vrayanderson6018]

very well filmed mate your edit skills are top notch

[@epicautomotivedetailing]

Thank you mate, Im still learning. Its so hard planning, filming, editing, designing and do the tags etc. Not to mention actually cleaning the cars. It gets exhausting

[@HypnotizinDetailz]

I started with this and it does the job 😊

[@robsx4280]

Good review I have one of these that I use with a normal hose (when I don't want to get the jet washer out) so worth getting the Karcher /hozelock adapter. You don't have the pressure so not as much foam but does the job.

[@epicautomotivedetailing]

I actually miss the simplicity of just hosing a car without the faffing of setting up a pressure washer. You given me an idea for a video. Thank you 👏

[@karl3927]

Great review Dave. I bought one of those a few years ago thinking I would get that shaving cream foam effect - how little did I know 🤣. I think you have the right idea in mainly using a tfr as opposed to snow foams. Keep up the good work.

[@epicautomotivedetailing]

Thanks Karl. I will test more out over 2021. I should of used neat foam 🤣

[@CJ21123]

Got one of these for a karcher K4. All went well until needed to remove it and the yellow fitting stayed attached to the gun. Had to use long nose pliers to remove it and damaged the part. I have found other people have had the same problem. Karcher should sort out the problem. Be prepared to take the foamer back to the shop

[@epicautomotivedetailing]

Yeah its not the best cannon. You can use AVA cannons with karchers now so check out the premium cannon its mega

[@9bar7and9bar8]

Exactly the same problem for me just yesterday. Now in the bin.

[@davidedwards6319]

Hi. Advice I am given by foam supplier is not to pre-wash the car (i.e. apply foam to dry surface as otherwise the foam won't stick properly to the bodywork. I'm going to experiment this evening.

[@epicautomotivedetailing]

Depends on the situation. Normally yes spray onto dry car but in some cases if a car is filthy you still could shift the bulk of dirt

[@jimmyjt16]

Yes always put snow onto a dry car.

[@cliffcarlo180]

Will it also depend on which snow foam product is being used along with the snow lance. Some are noticeably better than others. Just a thought.

[@epicautomotivedetailing]

Yes 100% correct my friend. I should of mentioned that. Making few other snow foam videos in December so ordering a few various brands 👍

[@404notfound.....]

@@epicautomotivedetailing Try some angelwax fastfoam! Straight from your own UK 🇬🇧. AMAZING foam & a great traffic film remover.

[@shaungovender8269]

Thanks Dave. Very Honest Review. I am considering getting one.

[@epicautomotivedetailing]

It's ok. I mean for the price you get what you pay for and it still works it's just not perfect so can't fault it based on face value.

[@shaungovender8269]

Dave have you used Car Chem products? Whats your take on them if you have.

[@epicautomotivedetailing]

@@shaungovender8269 I personally havent used them myself. I get through so many brands from trade or domestic but may give them a try next year. I got a few autoglym videos coming up, bear car care products and house of detailing over the course of the month

[@jonnyluff33]

Dear Dave , you said if there is a video we would like to see you would do it lol. I think there are a good few of us that would really appreciate a video of you cleaning a Picasso that's had a horse and a long haired dog in the back lmao. The challenge is laid down. Be safe

[@epicautomotivedetailing]

Lol let it go 🤣. Having said that my brother has a picasso with dog hairs. Thanks for watching mate

[@DetailingandtheBeast]

I have something you'll be amazed by in my next video... that looks suspiciously like a £3.48 lance I have tested last week! Yes £3.48 (incl. delivery)!! I also have one for £11 that will smash that Karcher for 6!

[@epicautomotivedetailing]

I need to try that nerf one u got. Looks like the best thing I've ever seen 👏

[@DetailingandtheBeast]

@@epicautomotivedetailing 🤣 Yeah it's awesome, brightens up any day when you use that!

[@epicautomotivedetailing]

do a coloured snow video with that, That would be hilarious

[@exciter300]

Great review mate. Just a question, with the foam nozzle attached to the Karcher Pressure Washer, what pressure setting power would you recommend setting the machine at? I just bought a Karcher K7. Would love to hear your expert advise, cheers!

[@epicautomotivedetailing]

To get the best out of it have it on the highest possible settings

[@exciter300]

@@epicautomotivedetailing Thank you very much. I will get the Foam Nozzle tomorrow morning and try it out. One more thing, what Foam Liquid is the best would you recommend?

[@peemick]

Karcher has a different view on car cleaning than you or I. This was designed as a car wash soap applicator, for a 1-0 bucket wash method, without a pre wash. I tell you I had nightmares when I saw their "how to wash a car with a karcher pressure washer" video. and yes I did start out with one of these :) It does work, you are correct on how most non detailers look at washing a car, but you do get what you pay for. the Autoglym snow foam lance is £30, but it does work a helluva lot better :) The Karcher K series lance (not the main unit, the vario lance) I think lacks pressure and fan consistency with that dumb twist for power thing. Every time I put the thing down the setting had changed. Dove me mad. The AG foam lance also give you access to 1/4" quick release nozzles (sold separately) which turns the Karcher into a more suitable enthusiast series tool imho. Good vid :)

[@epicautomotivedetailing]

I got an £80 karcher snow foam nozzle coming for the pro model next week. Should be interesting test. Thanks for watching mate

[@peterreeves6825]

Thanks I enjoyed the video, especially as I have just picked one of the guns up from Halfords, I wonder what fluid you are using in the gun and what makes the most difference the quaity of the foam or the quiality of the gun. So is it better to use expensive foam in a cheap gun or cheap foam in an expensive gun?

[@drewgibson7285]

I’ve just bought a Karcher K3 car and home. I think I will buy this cheap and cheerful foam gun. What is the best shampoo or whatever to use with it please?

[@miniman2645]

I bought a really cheap one stone bridge foam cannon of Amazon pretty much the same as the Karcher foam wise just changes the orifice in it I’ll keep you updated

[@ashleyowen7952]

Good video definitely what I was looking for 👍🏻

[@epicautomotivedetailing]

Thanks Ashley 🙏

[@ianwhitehead4728]

Hi Dave, I’ve just purchased one on your recommendation. Just one question please I’ve purchased muck off snow foam for my motorbike. Do I use it neat or dilute it ? Many thanks ian

[@ianwhitehead4728]

Hi Dave I’ve just purchased one on your recommendation . One question please I have bought some muck off snow foam for my motorbike. Should I dilute it or use it neat? I love your channel so many tips I’m now using thank you . Ian

[@christopherhargrove6356]

I'm going to try mine today my foam cannon just came in today.

[@EasyAvation]

Nice car ngl!

[@OldSkoolBiker62]

I have one of these that I bought for spare and I do use it quite a few times.. I don't know what Snowfoam mix you are using or a cheap product but I get a very good thick coverage with mine using muckoff Snowfoam.. I'm happy to use it.. and never had a problem.

[@epicautomotivedetailing]

Yeah it does depend on type of foam too. I got a cheap mjjc snow foam canon and it's crazy thick 👌

[@span89]

I bought the exact same Snow Foam lance, kinda wish I'd spent more and got a better one. Not thick enough for my liking.

[@epicautomotivedetailing]

Yeah I know what you mean about the thickness but the cleaning power of the snow foam is going to be good enough. I never really use a snow foam and opt for ore wash through chemical lance and still get fantastic results . Thanks for watching mate 👏

[@span89]

@@epicautomotivedetailing Yeah to be honest I think thick foam is more for 'the gram' keep up the great videos mate

[@nigellewis8461]

hi great videos got myself a autoglym polar blast snow lance excellent

[@epicautomotivedetailing]

Thanks Nigel

[@miaramovic69]

I purchased the Karcher original foam cannon for my Karcher K3 full control, and everytime I went to go use it, the yellow adaptor bit gets stuck, then the next day later, the seal broke and it started leaking. Before I bought this, i had purchased another foam cannon and it was the Halfords Original Snow Foam Kit for 20£ and for 5£ more, it lasted me 2 years.

[@oursulaert]

EPIC Thanks Dave

[@epicautomotivedetailing]

Thanks for watching mate

[@yotuanyboi6201]

I don't mind the karcher snow foam attachment. Got it for £11 and I only wash the car every 2-3weeks. Sure it doesn't foam as the high end but it's not about the foam it's about how good the foam product you use.

[@epicautomotivedetailing]

A good foam needs the right air flow. I've used amazing foam on cars with poor cannons and even chemical lances for testing and your right it still does do good job but honestly you get an even better job when it properly foams up 👌

[@CapitanBreakfast]

What does low power mean? Or full power? Does it have to be 100% detergent in the bottle or a mix? Any useful info at all?

[@chriscuthbertson]

This is very similar to the 'foam' cannon I have for my Ryobi EzClean. I've just converted the Ryobi to 1/4" quick release to give me more foam cannon options. Any suggestions for a low pressure foam cannon?

[@Audittr2108]

It applies the chemical so the cleaning will still happen. You can get longer dwell times with thicker foam & you can get foam lances on ebay for not much more that will do this.

[@epicautomotivedetailing]

Im getting an £80 one for my commercial machine soon so hoping that will be the dogs b#llocks 🤣

[@Audittr2108]

Let’s hope so for £80!

[@ptvfr800]

I use the Karcher lance with 100% shampoo inside and turned down low, I get great foam and it doesn’t use a lot of product. I also have the meguiars foam lance which is no better than the Karcher, so I would suggest save you money and get the Karcher but use better quality shampoos.

[@epicautomotivedetailing]

Thanks mate good advice. To be honest the only reason I made this video on this model was because I had about 20 messages asking me to testify out. Definitely want to try more out now 👌

[@TNotoriousAdam]

Can get plenty of lances off of amazon for around the same price as this one, except those ones can make proper foam that will dwell for longer.

[@epicautomotivedetailing]

Yes I will be featuring more. Just wanted to do this one first. Any suggestions which ones you like that are compatible with the karcher k series?

[@TNotoriousAdam]

@@epicautomotivedetailing I used to have the pro kleen one, which came with 5l of snowfoam for 25 pound at the time. Recently started using the amazon basics one with a k series quick release adapter. The auto glym one is pretty good too!

[@epicautomotivedetailing]

@@TNotoriousAdam looks like I'll be getting the Autoglym one soon then 👍

[@andrewkrespov87]

I wish I'm your neighbour someday... free car washes for reviews!

[@OfftheTopMTB]

Newbie question here...Should you give your vehicle a pre rinse with the jet washer before applying snow foam? Thanks

[@epicautomotivedetailing]

Hello it's always good to give car a rinse first if you're doing a safe wash. Depends how delicate you want to go with the clean

[@OfftheTopMTB]

@@epicautomotivedetailing thanks 👍

[@markjohnston3502]

Good review. I have a K5 and am thinking about buying a snow foam attachment to wash my 4Runner with. I use Meguiars and Griots Garage products. What type of soap do you recommend for this?

[@epicautomotivedetailing]

I use loads including white out by house of Detailing, snow foam from yum, alien magic coloured snow foam

[@RainyThrone19]

Good video!, i dont consider it a really good product but surely is a good deal for the price!

[@epicautomotivedetailing]

Yes it's very cheap but definitely worth getting one on AliExpress. Tried some very good ones

[@leehilton-hall2417]

timestamp 05:16 with which models is the snow foam lance compatible? You mention NOT the K6 ... Cheers. Other than that, GREAT VID!!

[@epicautomotivedetailing]

all the k series models that are in this video are compatible. Its not great to be honest. If your after a cheap one use an MJJC pro. or if you want to get the best go for mtm pf22.2

[@MadelnMachines]

I've got one and it puts out pure water - no suds or foam at all. Not sure what's going on - using bilt hamber touchless. Using it with a k2. Tried ajusting the nozzle and playing with the tube.

[@epicautomotivedetailing]

Touchless isn't a high foaming product so on that cannon it may have something to do with it

[@jaseem7]

How long would it take If I were to wash a car with Karcher K2? I heard Karcher K2 can only be run for about 20 minutes continuously.

[@epicautomotivedetailing]

Depends more on your game plan. Eg wheels first then door shuts then bodywork. So many factors based on skills, weather etc for some people 1-2 hours exterior for a good job

[@jaseem7]

@@epicautomotivedetailing Thank you.

[@robtallentire1051]

Hi Dave. What length is the hose you use and do you suffer in water pressure the longer the hose? Cheers 👍🏻

[@epicautomotivedetailing]

Hello mate, my hose is 10m, it's a heavy duty one, no loss of power with the xpert hd, my kranzle which I'm getting in January has a 15m hose. I did have a 15m on my old hd 6/13c and it did have drawbacks.

[@robtallentire1051]

Cheers mate. I’ve just got a k2 full car washer from Halfords. The hose is 4 metres but wouldn’t mind at least a 6m extension. I don’t think I’d lose any power using it but unsure really.

[@joshuabrock6897]

I have a karcher k4 and use this- what is the better snow foam attachment in your opinion ?

[@epicautomotivedetailing]

Judging by the comments there are better models out there. Autoglym one seems be getting positive feedback. I'm looking at making more videos so will try that one next

[@legend9335]

I have learnt a lot from your videos, thanks for that. Have you reviewed the Spear and Jackson 2000 watt pressure washer which seems to be only available from Argos?

[@epicautomotivedetailing]

Will take a look at it

[@ummer14]

Which snow foam lance would you recommend for the Karcher k4

[@robtallentire1051]

Another good video mate!! I don’t own a pressure washer but will be getting the k2 on Black Friday as hoping it’s a bit cheaper. What snow foam would you recommend or are they about the same as each other?

[@epicautomotivedetailing]

Lots of people saying Autoglym polar range with Autoglym foam nozzle is a winner. I'm researching it today and may buy one. If you want my best advice go visit karcher outlet and buy a refurbished one for fraction of price

[@robtallentire1051]

Thanks a lot Dave 💪🏻

[@robtallentire1051]

@@epicautomotivedetailing following on mate. I’ve seen a k2 full home pressure washer for only 88 quid from wilko. Would this be suitable for my car? I know it has the patio brush accessory thing but need it for garden as well as the car. What do you think???👍🏻

[@epicautomotivedetailing]

@@robtallentire1051 Ive been using the k5 for a video so i been using it for few weeks as an experiment. Its ok but feels very underpowered and takes a lot longer for me but im talking overall when im doing 5 cars per day. For just a weekend thing im still not sure. Ideally you need something with good power and a long hose. The 8m hose just isnt long enough and if you get longer one you may lose pressure. Id hate to say go for it when i know its just a bit weak and wont last long. ill have a look online for you and get back to you with a good solution

[@epicautomotivedetailing]

@@robtallentire1051 if im brutally honest i dont think it will make a huge difference to thinks like spots on the patio. Even my one struggles. check this site out www.karcheroutlet.co.uk/products/maincat.asp?mid=Pressure-Washers you will be surprised how much money you can save. These honestly arnt like your normal second hand ones

[@JB-F10-M5]

That’s what I use and although the tanks slightly smaller than normal it still has enough to give good coverage ( that’s what she said 🤣) I’ve certainly got no plans whatsoever to buy anything else

[@epicautomotivedetailing]

If it works for you then great 😁

[@JB-F10-M5]

@@epicautomotivedetailing it’s good enough for a mortal like me until next year when I drop it down to the Mr Miyagi of detailing 🙌🏽👊🏻 “You trust the quality of what you know, not quantity” What was great about Mr. ... “Balance is Key” ...First, wash all the cars. Then wax. Wax on, right hand. Wax off, left hand. Wax on, wax off. Breathe in through the nose, out the mouth. Wax on, wax off. Don’t forget to breathe, it’s very important. ☺️

[@JB-F10-M5]

Can you fit a Mustang in your Dojo?😉

[@epicautomotivedetailing]

@@JB-F10-M5 I didn't even know what a dojo was till I watched cobra Kai last week 😅

[@JB-F10-M5]

@@epicautomotivedetailing showing my age 🤣 quoting the original movie 🎥

[@bobstermaher]

Which Karcher would anyone recommend to wash my car and patio flags with ? A mid range one is my budget. Thanks

[@epicautomotivedetailing]

To be honest look at the classic hd4/8 or the 4/10

[@theoriginalalpha]

Hi, what foam solution did you use for this was it the karcher solution

[@Aliciadouglas1111]

What’s the best ‘snow foam’ to use in the lance? I’m all new to this haha

[@epicautomotivedetailing]

Hello I use yum foam 👌

[@LuciferMorningstar66666]

Hi Dave , to help you grow your KZbin page try making a TikTok account and use influencers to promote your page. The content you’re making deserves over 2 mil subscribers.

[@epicautomotivedetailing]

Hello mate. Thank you that's very kind. I'm definitely missing out somewhere. I put so much effort in these video's. Mind you I've nearly hit 100,000 views in 28 days so somethyis happening

[@LuciferMorningstar66666]

@@epicautomotivedetailing I’m sharing your page every time I get the chance, and I really believe I’m not the only one. I believe you will get there but the start is hard ! 💪

[@epicautomotivedetailing]

@@LuciferMorningstar66666 thanks incredible mate. Just the fact people like yourself do that is really kind. Thank you mate

[@insu1569]

would still pay for a foam cannon like chemical guys torq? anyway, what pressure washer would you recommend for someone who has no water supply and cleans from buckets? great content, subscribed !

[@epicautomotivedetailing]

Thank you. I just got one from mjjc and using it in my next video and think it's incredible

[@insu1569]

@@epicautomotivedetailing Could you recommend a pressure washer that can be used from a bucket.... anyway whats the minimum PSI for good thick foam ?

[@epicautomotivedetailing]

@@insu1569 the domestic karchers can draw provided you have the suction hose. I used a k5 with mjjc snow foam cannon and it's amazing. It's more about the cannon not the psi. My next video will here tomorrow which shows both working perfectly 👌

[@insu1569]

@@epicautomotivedetailing Thanks !! looking foward to the great content

[@ru42112]

Do you need the adapter for the foam? Or can it be added to the onboard soap tank

[@Englandsbestlover]

Can you use Bilt Hamber HD as aTFR? I don’t know which to buy but only want a 1L tub

[@andycole5816]

Hello i have got a small k2 karcher and have a work van and car to clean what snow foam would you recommend please

[@epicautomotivedetailing]

Honestly I would recommend something with a kick. So infinity wax powerfoam. Code EPIC can save you10% off it

[@YumCars]

Great video!

[@epicautomotivedetailing]

Thanks guys 👍

[@jusssy5078]

So, low foam setting is the yellow water adjuster on the top set to the lowest? Also, test 1 and 2 was neat solution in the bottle? Then on the Fiat you set it to full power, is that the yellow adjust with the least amount of water and most amount of solution? Test 4 was the first time in the test you added water to the mixture bottle? Cheers.

[@epicautomotivedetailing]

Hello No neat solution in the bottle. Its not very cost effective using snow foam compared to TFR so for basic valets id be inclined to look more at TFR any day

[@sbasra5660]

hi, what lance do you use, I have a K4 compact and hoping to change the lance to something more powerful

[@epicautomotivedetailing]

I got so many pressure washers and lances so all I can say is that my main one is yum cars stainless steel Lance with mtm sgs28 👌

[@paul.tuttle]

You do own a Nilfisk 180, don't you? If I may ask: What about a review on the original foam cannon which comes with the pw or comparison to others??

[@epicautomotivedetailing]

I featured it in the karcher Vs Ava Vs nilfisk comparison video. It was ok. No mtm pf22 but still good

[@paul.tuttle]

@@epicautomotivedetailing Thank you ever so much - I found it - and it is so useful - and, besides that: Kärcher used to build the world's best machines - but that is quite a while ago. Today, I would not recommend buying any Kärcher unit unless they catch up with quality.

[@ConsiderThis1-2]

Please can you show using wax rinse in the bottle and what's the best liquid wax to use?

[@epicautomotivedetailing]

Tbh I'm not a fan of those products. Personally I prefer rinse then spray as I go

[@p8rdm]

Do you ever leave the snow foam on and hand wash the car, been told this is a good idea giving safer cleaning more lubrication I guess.

[@epicautomotivedetailing]

Hello if you rinse, snow foam ,rinse then use car shampoo through foam lance it gives better safer lubrication

[@p8rdm]

@@epicautomotivedetailing yeah that’s exactly what it do, or snowfoam each section as I work around the car

[@KunalVaidya]

Nice, I'll be trying the karcher foam attachment on my fiat Abarth punto today. Nice to see Abarth car in the video i searched for learning how to use the foam attachment. I have entry level home karcher pressure washer

[@joshuamiller4453]

Great video, could you do a review video of your karcher xpert as I am considering purchasing one.👍

[@epicautomotivedetailing]

Way ahead of u my friend. Already filmed one. So mine cost 550 new but in the end I bought refurbished from karcher outlet for 350 so it's a bargain and they are solid 👌

[@joshuamiller4453]

@@epicautomotivedetailing Is that video on the channel yet, I am going to buy mine from karcher outlet also👍

[@epicautomotivedetailing]

@@joshuamiller4453 Not yet mate. I like to film in several locations to break it up a bit (always thinking of the viewer) Mines great but the parts are incredibly expensive but honestly i love mine

[@joshuamiller4453]

@@epicautomotivedetailing Thanks, looking forward to the video coming out

[@shoaibahmed57]

What snow foam lance is compatible with the karcher hd 4/8?

[@RomboutVersluijs]

Is it correct that some K2 models can't be run for more then 10min continuous? I have bought a K2 model and when I was looking at some of the manuals. I noticed this in a Spanish/Mexican manual. Yet the European manual did not state any of this. The European manual actually hardly states anything about usage, only tons of warnings

[@epicautomotivedetailing]

Seriously anyone with a brain would avoid the karcher k2. They are just awful beyond belief

[@poptartdrumstudios7600]

I've got one for a tenner with a proper brass fitting and a 1000ml bottle

[@epicautomotivedetailing]

Well done 👌. Had to make the video regardless as it's the best selling cannon in the UK 😬. I've been trying mjjc and think it's pretty good

[@poptartdrumstudios7600]

@@epicautomotivedetailing the foam looks watery. I'd recommend one of the metal ones

[@jasonwindebank5455]

Do you not use a mit or sponge once you have foamed the car to clean the car🤔

[@epicautomotivedetailing]

Yes of course well after you blast off the foam. The foam is there to remove some of the dirt

[@alm3id4]

Can't open your "my pressure washer" Amazon link. It fails to redirect

[@epicautomotivedetailing]

let me check thanks for sharing

[@MJJCvideo]

Hi, would you like to review the new MJJC foam lance Pro?

[@epicautomotivedetailing]

Hello DM me on instagram as i got a 4 coloured snow foams coming up to feature so lots of opportunities to test

[@MJJCvideo]

@@epicautomotivedetailing i just messaged you on instagram. could you please check it? cheers. :)

[@Danimaz3211996]

Are you meant to dilute snow foam ? Bought my first karcher yesterday turned up today and my snow foam did I was just gonna fill the bottle with pure snow foam concentrate 🤣🤣? Are you supposed to dilute it I thought the water from the like dilutes it as it's being sprayed

[@macekpavon9006]

So what makes the snow foam thick and "sticky"? The cannon? The chemical? or the chemical/water ratio? pls help 😣

[@epicautomotivedetailing]

Combination of cannon and foam. You can have the best foam but if it's in a rubbish cannon it's not effective. You need good flow and you can buy orifices to give you more kickback. Good cheap one is mjjc pro 2

[@macekpavon9006]

@@epicautomotivedetailing Got it. Thank you so much 🙏🙏👍

[@seanaldo9187]

I started off with the Karcher one that came with my trusty old K2 9 years ago. I had one for snow foam and one for a top gloss drying aid. Since then I have moved onto the Autobrite Direct HD snow lance and have also upgraded to a Karcher K5 full control premium and have never looked back. I still have the karcher snow lances in the shed as a backup incase I have any issues with my Autobrite one

[@epicautomotivedetailing]

Nice one. I'm editing a video in the k5 to come out next week 👌. Are you a weekend warrior or do you do car cleaning for a living?

[@seanaldo9187]

@@epicautomotivedetailing i am mostly a weekend warrior but do a bit as a side hussle for beer tokens. As its not a full time gig and more a hobby i wasn't charging an arm and a leg, but still struggled to generate business as where I live there are loads of mobile guys that have pretty much carved up the market.

[@epicautomotivedetailing]

@@seanaldo9187 well done mate. Yeh the increase in mobile valeters is huge at the moment due to the fact many people lost their jobs. Keep going brother 💪

[@seanaldo9187]

@@epicautomotivedetailing I would love to do it more but Covid has put it on the back burner for most of this year due to the day job..... the joys of being classed as a key worker due to working in critical infrastructure, but then fortunate that my employment is secure and without risk of losing. Going back 18 months I hated my job and wished I could do valeting/detailing on a full time basis but with the way things are now, I am glad I am in the position I am in now and I really do feel for the lads and lassies out there in a less fortunate position given what's going on

[@epicautomotivedetailing]

Thats very humble. yes 2020 has thrown so much at us all but 2021 will be better im sure. If its something you are passionate about then always keep it in your mind as one day it could just happen. Ive done it way to long now and had so many bad times as well as good!

[@mustafamalik2526]

how u have made that foam. is there any special product to make foam

[@epicautomotivedetailing]

Just snow foam mate you can buy it anywhere

[@ajackson-ross7295]

Can you do a video when you have cleaned the car and then it’s rained on it how to get rid off water spots plz

[@epicautomotivedetailing]

Hello that's a good idea. No shortage of wet days here in the UK 🇬🇧🌧️

[@tomeastman6634]

Have a look at Koch chemie FSE for water spots

[@doyoulikewinegums964]

I currently use this along with autoglym polar blast, a mediocre foam at best and only do it on a premium valet, looking to upgrade to a kranzel very soon!

[@epicautomotivedetailing]

Kranzle nice 👌

[@Zwiesel66]

I used it to clean my MTB but it is pretty useless as it does not produce any kind of sticky, thick foam - in the end it was a waste of money.

[@rajinramnath]

Hey is this does take out polish from your car???

[@epicautomotivedetailing]

No snow foam just soften up dirt and breaks it down for washing

[@johnvanderv.4219]

Hi, you never use a mitt? Great vid btw.

[@epicautomotivedetailing]

Its not good enough for me personally i feel these are the best 2 options so didnt want to feature something i have no faith in

[@epicautomotivedetailing]

and also thank you for watching the video my friend

[@johnvanderv.4219]

Ok. I'm lookin into new methods of washing my car. I used to use a car washing sponge, but everybody claims it gives little scratches.

[@epicautomotivedetailing]

@@johnvanderv.4219 Sponges aren't great to be honest but then again using wash mitts improperly can be just as bad. I do tutorial videos that may help 🙂

[@johnvanderv.4219]

@@epicautomotivedetailing ok, thank you!

[@Val_Halla777]

It’s not just the gun…it’s the type of snow foam detergent used Why isn’t this discussed?

[@epicautomotivedetailing]

probably because the video is many years old before i realised the importance of covering every single detail...