Ultimate Cheap Detailing UPGRADE.... Going Great Guns!! **Quick release Karchers only**

[@ForensicDetailing]

Check Nozzle aperture/orifice size is correct for your machine if you make this upgrade.... (Eg Karcher K7 needs bigger aperature than K2 or K4)... Consult In2detailing or gun supplier for support where needed.

[@thematrix28]

Forensic Detailing Channel I love your info you don't go deep you go surgical lol these companies should sponsor you because of your vid I bought car shampoo foam guns etc superb mate keep up the great info vids

[@SomeMadRandomPerson]

Shit I've just read this comment 😕 I just clicked the link and added it to basket and bought it for my K5 do you think there's anything I should be worried about or seeing as the K5 and K7 are very very similar it should be all good?

[@he15rgp81]

Thank You So Much for This Tip, I ordered for One for My K7 Full Control today . Edited to Add: "Your a Star !!! It will be a Perfect tool for cleaning My VW Caddy Maxi Life Wheel Chair Access Vehicle with my Autoglym Polar Blaster Snow Foam Gun and to be able to switch too & switch back to the Karcher Lance for Long Reach Areas is a dream . I have been hooked on Autoglym for the last 45 years. It works well for me.

[@StephenT71]

I never saw this comment until AFTER I'd broke my K7. Bought the trigger from HDD no differentiation on their site between any Karcher machines. Fixed the machine not knowing the cause, thought it was just old age and did it again. The trigger gun itself is OK but the nozzle set provided are not a big enough diameter hole.

[@ForensicDetailing]

@@StephenT71 you need a bigger hole for the K7 steve, but it will just pulse if you have the smaller hole. you can buy bigger orrafice nozzle on ebay for like a quid or something.

[@cam92]

"Playing Tennis" aye we know what you mean John 😉

[@Playingbyear]

Got enough foam there Jon? I think you missed a bit 🤣 now let me get out my Gillette Sensor Excel

[@Pantfoot]

Quick tip: Whenever you switch out the nozzles on a quick connect gun, point it at the ground and give the trigger a few pulls. This will ensure that the nozzle is fully seated and won't shoot off into the car. I wish someone had told me this years ago. Windshields aren't cheap.

[@iDropPhats]

100% haha I learned this the hard way, was detailing with a mobile service on a farm, gave the trigger a quick pull and blew the tip 200 yards out into a field. The tip was never seen again.

[@BionicRusty]

Ouch 😣 💵💵

[@johnroberts5357]

Great tip. I was thinking just that as I watched a video of a guy demonstrating similar quick release nozzles and the nozzle flew out on the car. But just wondering isn't it enough to just pull the nozzle a few times to make sure it doesn't come off? Also what about the snow foam Lance technically same rule applies to that, but I'm assuming just a pull test on the Lance should be ok?

[@Jeeper1378]

I did not do this with a metal angle adapter and put two huge gauges in my 5000 wheels 😢

[@hakman239]

I broke my snowfoam Lane like this didn’t damage car but fan blades on lance messed up managed to fix it

[@patricklavin3454]

Got one a couple of months ago for my Karcher K4 and love it. Be careful to spray away from your car the first time after switching nozzles. The nozzle can pop off and hit the paintwork if not seated correctly. Had one or two close calls

[@johnwatson8192]

I don't think they intend you using the snow foam lance for shaving - LOL

[@patricklavin3454]

Oops should have been close calls not close shaves 😄😄

[@AM4N18]

Is there some play in the trigger handle like you can see in this video?

[@lewisdoughty5255]

How do you find it with the pressure? Worried about using too much ahaha

[@pacobelgique264]

I have a Kärcher K5 do I need the buy the adapter from somewhere else ?

[@D992]

I have an old Karcher K7.85. It’s about 8 years old and still going strong. Will my hose just click into the bottom of one of these John? I’ve heard people saying screw it in but I don’t have a screw thread on the end of my hose 🤷🏻‍♂️ Cheers pal. 👍🏼

[@ForensicDetailing]

hi ya, its listed for K series models only. In2detailing might be able to help if you send them a picture of your connection, or you might be able to get a replacement hose.... If you cant seek clarity though I would not proceed as with purchase.

[@iainconnell4985]

If in2detailing went along the lines of being the uk obsessed garage that would be amazing

[@roblee7323]

Thanks for the vid Jon,... I'm definitely interested.... Wonder will this attach to my Nilfisk though???????

[@dipsta2000]

Rob Lee 73 having the exact same dilemma. My e145 is crying for this lance

[@russtaylor4242]

Yeah would like one for my D130 as well. If anyone finds a Nilfisk option please let us know. Only shame is I just bought my snow foam attachment and will near to adapt it.

[@timhutton3007]

After watching your video I got one, really impressed best bit of kit I've had for cleaning my car, excellent advice in the videos 👍👍

[@ivarwb4115]

Excellent review! A little humour is never wrong :-)

[@acecolin52]

John the red one is for cats.

[@firstname1927]

It’s out of stock already, that’s upsetting.

[@68lanman]

Hand fatigue is about the only negative I have experienced.

[@FABAutomotiveDetailing]

Edward Cabrera I second that! I have an MTM SG28 and my hand is tired by the time I’m don’t rinsing.

[@leehopkinson6824]

All in the wrist my son 😜 More practice needed me thinks !

[@ianstott9318]

I found the cheaper guns small in the hand,have upgraded to a Suttner gun which is larger and so felt more comfortable in the hand.

[@DavidC1]

be prepared to get wet feet everytime you use this hand gun thingy :D

[@R7YYT]

Great review! What snowfoam are you using from 6:08 please? 👍🏼

[@cormacjeffers4544]

The new Meguiars snow foam as far as I know.

[@merecat22]

I just bought one of these after your recommendation. Absolutely brilliant. Nice and easy to control and works well. Only one thing I would recommend and that's test spray first to make sure the nozzle does not fly out at a great rate of speed towards your car .

[@FABAutomotiveDetailing]

I have a setup like this but still watched the whole video because I enjoy your videos and typically get a good laugh like at the beginning of this video. Hand fatigue is my biggest complaint with my MTM SG28. I would like to see a company put a trigger lock to hold the trigger down because that would really help with hand fatigue. All the ones I own just lock it so it can’t be pulled. Great video Jon with great information!

[@markczanstkowski7832]

FAB Automotive Detailing so true! Why not a trigger lock to KEEP spraying and not to PREVENT spraying. gas stations have figured it out. 😉

[@FABAutomotiveDetailing]

Mark Czanstkowski You would think it would be simple to do!

[@dubhdughlas579]

The red ones to sign your work when you've finished washing the car 😏

[@ed40lew]

haha

[@jasonphillips3865]

The rubber hoses from Direct Hoses have the swivel feature built in. I've been recommending these as an upgrade for ages. Zero kinks and much better quality.

[@thedragon1107]

Greetings! Can you please provide me with a link to buy this cool product please

[@SpartanCW2000]

"Playing tennis" your search history says otherwise

[@JKhalaf]

The damn thing is out of stock everywhere :(

[@tonyhall9351]

In 2 detailing have two left as of last night if you haven't picked one up mate 👍

[@chrislow123]

Great review - thanks. I had the same thing with hand fatigue. I have 3 cars to wash and by car 3 my right hand was in agony!! I have a K4 and the part on the back where the pressure hose connects is perfect for hanging the trigger/gun on. The trigger lock on my Suttner 2300 works perfect and stops you firing the gun - must be a design fault on this one. One thing I found is that using the short trigger you’re closer to the car and rinsing etc is more accurate and feels quicker to get the job done. Arch cleaning and rinsing wheels etc is much easier and more accurate.

[@Audittr2108]

Imran’s offering looks like an excellent budget offering. I may give it a try. I can hear Matt Mormon shouting at his laptop screen watching this. “Brass quick release and fittings, no stainless, look at that gun, it’s junk!”

[@grahamsopp]

an advantage of the gun is that it's smaller so you can get in places, a disadvantage of the gun is it's smaller so you can't reach places - love your reviews ;) 'quick release' is a bit of a gimmick, Karcher push twist is just as quick so I see it as only an upgrade if you want to use a sexy foam lance

[@D992]

These units are available on AliExpress but I don’t think they come with the rotating parts etc

[@ForensicDetailing]

thing I would say... look at the specs of the AliExp gun.. Then look at the specs of this one.. And the cost of swivel and the cost of karcher adapter. These are cheaper than aliexpress, or lets say a much better deal. And you have support for them from UK supplier.

[@D992]

Totally agree. 👌🏼

[@martin1649]

Hey, love your videos, and i want to ask, would this work with a Kärcher K2? The OEM snow foam press and swivel gun just sucks! I’m looking to buy this trigger with a proper foam gun.

[@colinsmith9131]

Hi mate Love the channel, learning loads for cleaning my car I have a couple of questions regarding this video 1. Is that gun compatible with a K4 I know you have a K7 2. I’ve never been able to get a thick snow foam, I’m now using the Meguairs which I’m finding better than the Bilt Hamber, the bilt hamber just ran straight off the car, I did try all different mixes with the Bilt Hamb hasn’t got high enough pressure, but like I said the Meguairs is better but not anywhere near what you get. 3.

[@jaydenjaneway3765]

Great video! Just ordered myself one to replace the standard Karcher K4 Gun, look forward to giving this one a go!

[@jasonburgoyne1591]

Hi I've just bought I off amazon for 35 with everything gun laens and 5 nozzles really happy I shall try her tomorrow love your voice jason

[@zXLuke4efcXz]

I like the swivel head, but not the fact it'd so stubby. Surely it just means you'll be standing closer to the car and therefore getting wet with all the water and other crap that bounces off?

[@ForensicDetailing]

cant say I notice that no luke.. but you can attack like wand arms to them to make them longer.. you do loose reach for sure.

[@stangisimo79]

Hello Forensic Detailing Channel. What is the exact model of the short gun you use in this video? greetings from Jalisco Mexico

[@anthonyworthington6495]

Hi,just bought the product,they have only come back into stock, and the sprayers have been depleted by 2 as they don't come with the red and black it has not arrived has yet and when it does I will give you my opinion,if you don't mind me saying I think you have some wear and tear in your arm as I have just bought the DeWalt cordless polisher (on your review) and you also had an issue with your arm as did with this product🤔 new subscriber

[@SomeMadRandomPerson]

Did anyone ever locate the extension bar for this quick release gun?

[@GH3_Posh]

I'd be interested to know that myself. 👌🏻

[@SomeMadRandomPerson]

I'm gona ask Jon the now and let u guys know 👍🏻

[@beardtheorys1637]

I need to know what the connection for a Ryobi is to attach a mjjc to the Ryobi???? Help

[@LGarbac]

Now you have to buy extension nozzle and pivoting quick connect, you can wash everything with it, very usefull tool

[@AlbaderBohamad]

The Karcher comes with a really annoying gun. It's like trying to snipe something that within your hand reach. With this system, I can do the work of two hands moving that annoying long gun with just the flick of my wrist.

[@slowsteadysteve6565]

Just got one it’s peeing out around the swivel hopefully when I find my spanner’s it’s will rectify that

[@danielfitton437]

I have a Suttner gun with a swivel exactly like this and it's great however, it cost considerably more so this is a bargain. This and wall mounted hose real has transformed my washing experience.

[@AMMO1981]

Can someone pls tell me how to attach the snow foam Lance. Im having difficulty getting off the existing threaded part on the snow foam lance to put the new adapter on. It is on soo dam well 😕

[@dazdrum3390]

So glad you have shown and reviewed this. I have been waiting a while to buy one of these for my K7 and have just ordered it from in2detailing. 👍🏻

[@SilverTrill]

I want one of these now , is your hose on your karcher upgraded? My karcher kinks way too much but yours seem like it’s kink free also is there a reason why you down the pressure when rinsing?

[@hakman239]

Iv bought a used like new k4 full control today for £100 and the stubby gun today

[@brandywell44]

In time that weak looking trigger is going to snap near its fulcrum. Can spares be obtained easily?

[@jason-si4mq]

Had it about a week there amazing

[@gfroudy]

What's the snow foam lance that you're using ?

[@glenpeters2261]

Great revue John I've been looking at getting one fo these quick release guns and as all the guys say. your honest observations seal it for me

[@ryanb9339]

What snow foam Lance is being used?? Thanks

[@crazyglis]

Your video's are amazing are very helpful Could you please let's us know which snow foam gun should I use for karcher k4

[@am54uk14]

The kit or stuff John is showing here is 11.6mm quick release sometimes called 1/4 as it's about the same. You can choose whichever one you want as I've not seen any that are not 1/4 bsp thread. I use a 2L foam lance I got off eBay from China and came with the quick release plug already fitted and works well with my k4 it cost £13. So finally there's usually always a way that stuff can be used with other stuff just doing bit of research 👍

[@npp909]

Why UK uses just electrical power washer and no gas?

[@Adam-pt8ry]

Is there a way to make this work on the old K2 karcher? it is not quick connect

[@garyredmond1890]

Might look out for this at Waxstock this Sunday. Nice review John, can I ask what snow foam you're using in this video?

[@ForensicDetailing]

that was meguires ultimate snow foam... Its damn expensive I reviewed it on the channel.. Its damn expensive but its very very thick and blingy... It will be in the next snow foam shoot out so we will test it properly against more products soon.

[@makingcookingfixing]

Jealous of the foam this produces!!

[@pakkawat_r]

Hello I have a question 1. Do you think buying expensive foamlance is necessary? 2. Foamlance from China uses more foamwash than expensive foamlance? 3. If thick foam is required, pressure washer and gpm are required. How much is the minimum?

[@ForensicDetailing]

1) yes mate totally 2) not necessrily the flow rate of product to water can be altered with a nozzle but also orrafice size plays a part 3) no set answer for this all foams are different concentrations for example, and orrafice size of the lance plays a part. GPM (which is flow rate) and also pressure play a part. but yes higher GPM and pressure is a factor but you also want to buy a lance thats suitable for your pressure washer.. say you have a gas powered high pressure high GPM washer and stuck a lance for a tiny electric pressure washer on it you might back the gas powered pressure washer up to much (which is a bad thing to do). consult whoever you buy the lance off of, to make sure its suitable for your machine.

[@MrT_1973]

I have an older Karcher 7.85 pressure washer; works perfectly. Would I also need the larger nozzle aperature of 1.5mm diameter too? Thanks.

[@ForensicDetailing]

the adapter only support K series mate. I honestly dont know what aperature size your unit needs. My K7 needed bigger one to stop it pulsing so you can just by larger if needed they are only like a quid for the white quick release nozzles.

[@chris10699]

Have you ever upgraded your hose for your karcher? E.g. gone for a longer length? If so which company did you use? I noticed my karcher hose is abit short! Kind regards

[@ForensicDetailing]

no m8 its stock

[@billyclarke1791]

When using this with a K4 im guessing you can't adjust the pressure? As normally when using the K4 gun it has the twisting barrel to adjust from minimum and maximum.

[@ForensicDetailing]

correct but as colin mcray used to say if in doubt flat out.

[@seanhammond4527]

Hey just got mine today it’s mega 👍👍

[@Dor_sap]

Tried to order swivel gun that you recommended but they do not ship to my country. Where can i find that gun and adapter that will fit my karcher k7 hose? Cant find anything in amazon

[@forensicunplugged4295]

I have no idea what country you live in Dor but sorry I cant answer that question.. but with K7 you need to be carefull and get the right one of it will pulse due to excess back pressure. maybe try and get a friend to get it for you in the UK and ship it to your country?

[@finnodell8336]

I use the 0 degree for blasting out pipes

[@cleanmachinedetailing]

great they're all sold out!

[@lewis6448]

Hi buddy, the standard snow foam bottle you get for your kartcher when you buy it, can you not use it on this new swivel trigger?

[@ForensicDetailing]

No m8

[@davegraham1398]

Jesus Christ John, what tyre dressing ard you using? The foam really struggling to stick 😃😃

[@ForensicDetailing]

thats gyeon tyre express yer its really repellent

[@benjamintakacs8415]

Whit the karcher gun you can also adjust the pressure and works whit the quick release just put the "old" close to the unit and set the pressure what you want. Works fine.

[@ForensicDetailing]

yes this is exaclty what I do. leave the old gun in the trigger holster. I almost wish I could saw the little + and - control off the unit it and glue it to the side :)

[@jamiewhite9988]

Wish it was still around £35!!

[@iyona14granturismogt6gtspo7]

I do not like my gun swivel.

[@davidbee3448]

Ordered, I love my K5 but the gun is too big and cumbersome plus its a pain when you want to was your wheel cleaning kit after ever use, great video as always.

[@normanrobinson4342]

David, is yours the new K5 with the wireless lance? Wanted to order this, but not sure if I need the K5 or the K7 one for the wireless controller

[@pacobelgique264]

Does it need a adapter for the k5 ?

[@Paolo0902]

Bought one from Adam's Detailing shop - Nilfisk Quick Release Short Trigger Gun with Quick Release Nozzles - Nilfisk Short Trigger × 1 (£35.99). Made just in time, because they sold out.

[@dimitarkirchevdimitrov6321]

Hi, Which model is this one?

[@hakman239]

Red is for like gaps in decking

[@Dan-ly7ut]

Hi if you have Karcher or different pressure washer you need change Foam Cannon Orifice: 1.25mm to 1.1mm Nozzle Screw Jet for Snow Foam Lance because your normal pressure washer is not strong like professional hi and.Then you will have better foam

[@23hublock1]

Carbon Collective Satsuma foam is very good. Very adjustable between thick and lighter foam. Standard AP Autobrite cannon here, with Kranzle K10 122 TS

[@bogdancoman91]

Oh, I’m a bit disappointed that I saw this video just now. I have a Karcher K4 of some sort and I bought a foam cannon. I then paid about £10 for the adaptor from Karcher to quick release. And then bought the nozzles from ebay for a few quid. I hate that I can’t control the pressure for the foam cannon and by default is “medium” usually. Sometimes is on “hard” which is what I would like.

[@J0ELYP]

Following on from this, I’ve scrolled through the comments and can’t see any similar issues to what I’m having. I find that when using the trigger gun, the swivel is locked solid by the water pressure on my K5. If you release the trigger you can just about move it but it’s really quite stiff to move. With the pressure removed, it swivels smoothly again. I was wondering if anyone you or any of your followers had experienced the same, Jon? And if the newer “deluxe” version has remedied this issue?

[@perfectshave85]

Do they still get them in stock? Every model on the website says out of stock.

[@ForensicDetailing]

covid playing havic with shipping

[@panagiotismylonas5496]

Great video!!! I have the same pressure washer and I order for snow foam 1.1 and doesn't work!! When I put the old snow foam works you know why that's happening

[@GenX.Bigfoot]

I just bought one of these chinese snubby guns (foam canon included) , I'll try it out tomorrow. They all have the same design under different brand names but they are the same thing., twinkle star, sooprinse, mingle, etc.... I also bought the adapter kit with the swivel. It's not as smooth as I'd like but it will suffice for now. Hopefully I'll be able to get a couple of years out of it then move on to the Italian one with the stainless connections. Thanks!

[@callumhill7208]

Anyone using this with the K4? What's the foaming and and pressure like as you can only adjust the pressure with the lances.

[@Jase2114]

I use a karcher snow foam bottle how would I be able to fit that adaptor Jon to the bottle ..

[@ForensicDetailing]

your lance needs to have a removable fitment mate. I dont know what the karcher one looks like but I suspect it probably only supports karcher fitment and you cant unscrew it to fit quick release?

[@steverabbits]

I've noticed a LOT of pro KZbin detailers use these and they do seem to provide a very high volume water curtain. It takes me a lot longer to rinse my car although that could be because I don't have a Karcher pressure washer. I've never seen a K4/5/7 in action in real life but I suspect mine is quite weedy by comparison. It was cheap though but has performed admirably so far for the money. Got it from Lidl! I only use it on my own cars and I'm just not sure it's worth laying out £500 or more just for weekend car cleaning use. I do sometimes think people jet wash their cars with too much pressure too, I mean how much pressure do you need? And when I see detailers who start off BEFORE they snowfoam by saying 'just rinse of any loose dirt and muck before you snowfoam' and then they proceed to hit the paintwork with a full power pressure washer 5 inches from the surface I just cringe. You may as well sandblast your paintwork! The dirt does not magically lift itself off the paint, you are literally forcing it across the surface with God knows how many lbs of pressure. It makes a mockery of all the 'be gentle, don't use your microfibre with pressure, avoid contact washing, change your microfibre every 3.5 seconds' etc etc. Don't pressure wash a dirty dry car, you may as well just wipe a rag across it!

[@LSD04]

You’re possibly about 3 months too late for me Jon. Upgraded from a K4 which I didn’t really have an issue with but wanted a short gun and a longer hose, so at least £800 later and I have invested in a Kranzle K10 and Obsessed Garage UK package with a PF22. Funny thing is I’ve not used the short gun but the longer better quality hose has been awesome and probably the swivel connection.

[@Jenga105]

Just got a similar one with a 1/4" quick connect on both ends and a replacement 10m flexible rubber hose for my C120 Nilfisk, replacing the 6m hard plastic hose and the long lance in 1 and making cleaning the car a way easier prospect. Cost a bit more owing to the hose too, but Nilfisk don't make an M22 adaptor and the third party ones regularly suffer blowouts as they're not secure enough.

[@jackthelad7775]

Hi Jon been watching your channel for a while and spent a few quid with In2detailing.I purchased the MJJC snow foamer with karcher adapter to fit to the karcher k4 pw.I am now looking to purchase a trigger with swivel and quick release.I looked at my JMMC foamer and I need to disconnect the latched attachment which leaves a threaded end on the foamer so was wondering if you could put me in the right direction to purchase the figment between the mjjc foamer and the trigger gun.Any help greatly appreciated

[@ForensicDetailing]

in2detailing sell it. I think it might come with the gun. get an SGS35 gun its worth it worth the steel fitmant. Ask in2detailing is it comes with the quick release fitment you can fit into your lance.

[@jackthelad7775]

@@ForensicDetailing Hi Jon thanks for getting back to me I had a look on the in2 website and if you. Blow up the pic you can just about make out the connection on the pic.Thanks for recommending the SGS35 I was thinking of going the extra for the stainless steel fitments as paying a little extra getting it right first time usually pays off

[@lesoo3]

i think it puts you to close to splash back not a problem when its warm but in the uk its not often and if you wear glasses they get plastered, I had lance from a previous model , keep me snow bottle on that one then swap over to the variable lance when rinsing don't need all them little nozzles ,the longer lance works for me I do not get wet and glasses are clear

[@neverstopcruising]

I need to buy a new cable for my karcher K2, can you tell me what cable I will need that will fit the quick release gun when attached to the karcher? Also in the video I notice you sprayed the car with foam and then just rinsed it off, do you not need to rub it in and what was the foam? Thanks

[@mandopando68]

Just ordered one for my K4 from In2detailing but they sent the Wrong quick release 🥺 But after talking to In2detailing really helpful sending the right one Thanks for your channel John I wouldn’t know about In2detailing if I wasn’t following your channel I have to say there customer service is second to none .... They have a customer for life 😎😎

[@MrJoshua]

OMG, I didn't realise my stubby gun came with the snowfoam lance adapter! You've made my day!! I thought I was going to have to buy a new lance :) Merry Christmas!

[@MJJCvideo]

Hi, would you like to review the new MJJC foam lance Pro?

[@Jimi8512]

I have the k7 but earlier version with the pressure control but by twisting the handle. How important is it to control the pressure lower when using a foamlance? Because mine would loose that pressure control whenever I’d use the “44 magnum”.

[@thewelshwizard5869]

It’s the only way to go, I bought the MTM Hydro SG 28, I’m too embarrassed to say how much it cost to change everything over on my Nilfisk Alto P150.1. Your method is significantly cheaper, well done you.

[@theorez1]

Will this work on the karcher k2 it's got a plastic connection on the hose not metal

[@ForensicDetailing]

should work with all modern K series.. but you can always contact the guys which sell it and show them your fitment and stuff and they will be happy to help no doubt.

[@sukh16v]

Just ordered one from the website mentioned. Just wish I came across this video before I bought a replacement Karcher lance as my old one seized. Original Karcher Lance 65 sovs, the short one at 35 makes it a no brainer really.

[@philevo400]

Good video that.. Thanks. I'm going to order a gun.. Xmas prezzie😊.. Says out of stock Tho😢. Can you help,im,after a more flexible soft hose for my Quick release k4. I can't find one anywhere. Approx 10 meter. Thanks for any help. 👍

[@keithhilton1564]

I have a cheap gun and the locking does exactly that. I just put the white and green nozzle in my back pocket. One word of warning, make sure the quick release is in correct. Best to aim away from the car, my Kranzle has some serious power. I like the swivel idea but may be a bit bulky for my set up. Cost of my gun about £10.00 with the 5 nozzles. Owned for 2 years no issues what so ever. The standard lance is a right lump, i love the smaller gun. Awesome for getting into the wheel arches also. Awesome review John as always.

[@DKVinyls]

If only they had gone for a gun with an M22 fitting directly into a Karcher quick release. The number of adapters on the hose side put me off so I put my own package together.

[@Darkhunter218]

I have the K1700 cube model and I'm not sure which gun/hose to pickup as a replacement? I am already tired of the rinky dink plastic gun, and the kinky stiff hose.

[@ForensicDetailing]

I dont know. but if I had to guess go with the K4 gun package. If your machine pulses with the white/green/yellow nossles that come with the package you can buy bigger orrafice ones on ebay for a quid or something.. try 40 hole size if you get pulsing issues. I used 40 on my K7, we discovered it pulsed with the K4 sizes.

[@Darkhunter218]

@@ForensicDetailing Thanks mate, I was actually getting pulsing that was making me nervous yesterday, I'm gonna pick up some of the larger orifices for sure

[@maryellis3661]

whats the best washer to buy I have a karcherl K7 and I don't like it

[@ps238mb]

A Kränzle 1152 TST. Check out Pan the Organizer's Video about it.

[@benhowarth5111]

I've been waiting for something like this, so glad you've done a in depth review. I also have a k7 and would benefit greatly with a setup just like yours. I'm interested to know where you got the snow foam canister from though. I have the karcher one, and it's not the best. Thanks in advance. Ben.

[@m22_media95]

Very tempted but no Nilfisk ones available :(. Also, your "Bargain £1 Mini Inpection Torches" Amazon URL is out of date - any recent recommendations?

[@alankelly1542]

Thank you for another fabulous review. Needless to say, I’ve ordered one. I just need more gigs to pay for all this stuff I keep ordering 😂😂😂