Check out my Turbo 400 with LS engine

[@boydco6587]

Great video. I would suggest not using the crankshaft adapter and instead getting the correct converter with the proper extended snout. I ran a very similiar setup to what your doing and it eventually after 3 years took out the thrust bearing in the LS engine. The adaptors doesn't allow the converter to float as much as it should and ends up pushing the crankshaft forward way more than it should. I had to replace the crank and block.

[@Adynpont]

Can you link a converter?

[@JDawgBuilds]

Nice! We just put a turbo 400 in ours too. We had a ford C4 before we have an old 1990s Mustang 5.0 engine we toasted the transmission in the californa 300.

[@ntdracing]

The Cali 300 killed our 6L90 too.

[@JDawgBuilds]

@@ntdracing those hills man…

[@HandMadeRoyalty]

@@ntdracingwhat about your Th400?

[@papergatorzfedducca7998]

Nice details bro!!🔥🔥🔥🔥 Do you have pics of your engine stand and that transmission holder? I would love to build them!!🔥🔥🔥🔥

[@Catfishgrande]

Exactly how I would've done it. Nice work!

[@quintaviuscummings3751]

Did u put a restrictor in your transmission considering u doing a Ls engine

[@hoopergaragetv608]

How do I find your Amazon link? I couldn’t find it on your webpage. Thank you!

[@coltongreysoper2134]

How are you setting up the efi system for this? Are you using the factory system? Trying to determine how to setup with out an electronic connection to the transmission

[@ntdracing]

The TH400 is completely independent of the ECU. Not a single wire goes to this transmission. Simplifies the operation. I do need to get a good solution to rear trans fluid temp. Thanks for watching.

[@coltongreysoper2134]

Which efi system are you running?

[@ntdracing]

Stock EFI from the Silverado. @@coltongreysoper2134

[@ZITAS-SON]

What dust cover do you use 👍🇦🇺

[@Grant.Tatum98]

Hey there! I’m not familiar with this channel but I’ve noticed you’ve posted in the FSJ group on Facebook before. Would this also work for the original TH400 that came behind the 360? I have a free lm7 and trying to figure out if that is an option or finding a 4l60e. Everyone in my area thinks a 4l60 is work gold for some reason.

[@ntdracing]

@@Grant.Tatum98 Yes the TH400 will work behind the LM7. I have another video dedicated to hooking up the Winters shifter too. Thanks for watching.

[@ntdracing]

@@Grant.Tatum98 kzbin.info/www/bejne/epWUcqVpqJyfa5Ysi=pbSowH_RfrdOtqI_

[@ntdracing]

@@Grant.Tatum98 kzbin.info/www/bejne/epWUcqVpqJyfa5Ysi=pbSowH_RfrdOtqI_

[@justinw523]

Did not show us what flywheel or adapter you used

[@boydco6587]

Yes he did....in depth.

[@justinw523]

Alright I seen it. When I seen the transmission bolted to the engine I thought he skipped it all so I backed out of it lo, I appreciate it

[@HandMadeRoyalty]

12:55 that part number please

[@cjtroutt8092]

What was the main problem with 6l90e that you did not like?

[@ntdracing]

My experience was questionable reliability. I will caveat that with saying that we used questionable gear boxes, but we would lose gears or the ability to sport shift. For racing I really wanted to eliminate things that I could not control, so a TH400 with manual valve body works better for us. I think day to day driving would be much better with a 6L90.

[@cjtroutt8092]

@ntdracing thank you for the reply opportunity, and yes, when I was truck pulling th400 was great to have the the 6.0l and 6l90 I wanted to install to my street square body chevy is the cruisers just to have fun. Happy new year

[@OMRY1561]

@OMRY1561 - 4 min ago Hi nice video Great information I have 1967 cadillc th400 and 429 engine Do I need any adapter if i install 350 It1 gen2 to the th400 thank you

[@ntdracing]

Not sure. Few years ago I ran into a problem with a TH400 that did not fit onto anything. Almost could not give it away. Hope you do not have the same problem. Good luck.