2 speed TH400 build (ASMR-ish)

[@eriklarson9137]

The king racoon sent me.

[@mountainsgarage]

Great video, fun to watch a skilled builder do his thing!

[@ryanr2n2yc]

That was a cool video! Finally a build video I can enjoy. Loved seeing the custom machine work done on the lathe and the time to indicate it all. Great content

[@mtedwards78]

This is intensely satisfying. Makes me want to build another.

[@TurboAdam]

Glad to see all the new content man! Been following for years. You inspired MY turbo LS Crown Vic build! Your dominator tune got mine up and running actually. Thank you for everything you do!

[@cameron878]

:blushes: thanks for the kind words!

[@SloppyMechanics]

yueessssssssssssssss

[@Gearbhall]

I was wondering why this came up in my feed, and I am glad it did.

[@SquirrelTuned]

I am not a fan of working on transmissions. But watching this is like a speed run of it and makes the process much more enjoyable lol.

[@cameron878]

That's what I was shooting for, leave all the fluff on the cutting room floor and just put the meat and potato's in, thanks for the kind words!

[@SquirrelTuned]

@@cameron878 Nailed it for sure. I would be happy if I didn't have to take one apart ever again and I enjoyed all the way through.

[@BigFun4Life]

Great informative video,thanks for sharing your knowledge..

[@davidmull1540]

thank you for taking time to do this!

[@hankclingingsmith8707]

FINALLY SOMEONE WHO KNOW WHAT TO DO TO BUILD A PROPER HIGH HORSPOWER TURBO 400. THX

[@philbetthauser9547]

That's one heck of a unit you built.

[@robwigglezz944]

Very cool. Thanks for taking the time to do this. We all know time is money

[@garywoods148]

Nice video! Looks like you learned a lot from Hutch and the other guys on Yellow Bullet. I just did a pro mod direct drum and wound up with .125 clearance. Had to get the manufacture to send me some extra steels. They were .060 wish I had a lathe to cut some factory thick steels to take up the clearance.

[@cameron878]

Wouldn't be where I'm at without those guys in the transmission section!

[@TurbineResearch]

Awesome videos !

[@cameron878]

Thanks!

[@rforres]

Just found this. You’ve come a long ways and I’m really impressed!

[@richardsmith-qy6vl]

I sent my fairbanks turbo 400 to a friend to rebuild and when he tore it down the case was no good they have those raised parts in it i dont know if it where the drume sits but he told me it happens alot from down shifting it so much so he was looking for a case for mè and i was also looking for one i called a friend he saidhe had one that was in a blower car he bought but it was converted to a 2 speed he gave it to me he said it was pulled out the car because 1st gear was t0 aggressive for driving it on the street so i guess thats why it also dont have a transbrake or a manual valve body . I never used it yet my buddy found me a good case and built a 400 for mè with s manual valve body with a reverse pattern im sorry now i never had him sèt it up with a trans brake once i get my 421 built im going to put it behind that and see if i like it. Great video

[@BigMikesGarage]

Nice work. Love the attention to detail.

[@davidreed6070]

That was very interesting and informative. Thank you.

[@ls87gbody]

Love the video . I wish you did more th400 and powerglide videos in depth like this. Please do a 3 speed th400 or powerglide, 1200-1500hp buildup. Subbed and following.

[@dresdensvo]

Great video , I will use it many times . Now if I can find a 4L80 video this good .

[@Qwiktripz1320]

Good video man. I just built almost the exact same unit down to the Farrer Valvebody. Only difference was using a intermediate clutch eliminator.

[@rajcam80]

Nice work! I am prototype builder for a OE manufacturer. The new stuff is similar to the past.

[@cameron878]

What's next up after 10 speeds?!

[@rajcam80]

@@cameron878 I believe eclectic or hybrid. Not sure there can be a higher speed transmission.

[@Gearbhall]

This was a very interesting look at the work that goes into this. Also... am I recognizing your name from the sloppy mechanics community? edit: I see Matt's comment now so that answers that.

[@alchampion340]

GREAT Video. Will you sell a couple lower gear sets?

[@jdubcbr600]

I would've thought the billet forward hub would've came machined for a bearing. Shows what I know...

[@mikeg4163]

Cool video

[@Ribbityibzki]

You spending 8 hours on a TH400 makes me feel like a hack slapping RFE's back together for dealer warranty.

[@cameron878]

I don't build a bunch of race th400s, mostly daily driver stuff around here. Finding bad parts in 40 year old transmissions, walking all over to get core parts, machine work, plugs here, restricting feed holes there. Phew. I can completely tear down, bushings, seals, etc, and build, including all the pump and VB updates a 4L60e in 3-4 hours if no one bothered me and the phone didn't ring. A th400 with a bunch of aftermarket stuff? They always take me a while.

[@timweb1510]

Can you build a 3 speed next

[@cameron878]

It basically looks the same except with a different valve body

[@timweb1510]

@@cameron878 I’m trying to learn my best about this turbo 400 I have and what parts need to be modded trying to reach 700-750 wheel.

[@tomperry9954]

I enjoyed the video. I do have a question. With the Ultra bell, how do you insure that the centerline of the crankshaft and input shaft are in alignment? I seem to remember offset dowel pins back in the day.

[@cameron878]

The 8 pump bolts are shouldered and I believe that's all that aligns it. I'm sure there's a way to check it, I never have and have never had an associated problem. That doesn't mean I'm right though. Lol

[@cameron878]

Also, thank you for watching and the positive comment

[@BlaserBuilds]

Made it to the end. What lube are you using in the cat sprayer?

[@cameron878]

Little wd40 to keep it from rusting inside while my friend finishes his truck it's going in

[@BlaserBuilds]

@@cameron878 Ahh, nice.

[@pedricktownperformance6781]

I also use the 4l80e intermediate piston and 4 clutch stack in the th400. What's your opinion on Teflon rings on the pump and center support? I've used teflon and metal rings but never had any issues with either one. It's nice to see someone else spin and move your drum pistons up and down to make sure the seals are in right, other then the intermediate obviously.

[@cameron878]

I use metal with stock rebuilds, not in fixed line pressure, other professions told me it won't end well. I've used both of the 4L80e style sealing rings and the orange scarf cut Teflon all with positive results

[@BEANS-O-MATICtransmissions]

A 4l80 int piston sits below the snap ring in a 400, it has a gap to close before even hitting a steel. May be better off milling a 400 piston to get clearance.

[@pedricktownperformance6781]

@BEANS-O-MATIC Transmissions the early 4l80e piston fits with no issues, the late 4l80e piston you have to use the small wave plate to make up the height difference in the piston.

[@averykruger7957]

I hope the converter wasn't sitting around for too long 😅 What is the mystery spray in the Zep bottle? Or the super goop you put on the intermediate piston seals?

[@cameron878]

Wd-40 to keep it from rusting. 50/50 mix of ATF and STP oil treatment

[@BEANS-O-MATICtransmissions]

​@Cameron Vic i use the same mixture, love it for assembly! Made me smile to see that.

[@troybaum114]

hell yeah bro

[@chambjm]

11:50 makes me want sweet and sour chicken

[@cameron878]

Gen tso > seeet and sour

[@nyxiekore]

your video is awesome. do you have a valve body and plate combo for Low& Reverse only. its for a demo derby build

[@cameron878]

I'd bet my buddy Grady that built this valve body could build you one like that

[@cameron878]

Search "farrer out transmissions" on Facebook, message that page, they might be able to help you

[@emccolly]

Yes!

[@tracyscott70]

I wood love get my th400 built to 2-speed

[@stevedeschamps8758]

Would be nice to hear all details

[@cameron878]

It's basically all in the video

[@flinch622]

The pan at 31:16 ... I don't recall seeing a stamped/stock cover with drain in that location. Modified? I could use one of those...

[@cameron878]

Came on HMMWV cores

[@hiddenman99]

Are you the converter guy Cameron? Forgive my ignorance, great video!!!

[@cameron878]

I'm not sure what you're asking? I think you're asking if I'm the guy from cameron's torque converters. I'm not, he's over in South Carolina I believe. I'm in TN, I'm a nobody compared to him.

[@hiddenman99]

​@@cameron878 yes That is what I meant to type, and good work to the Video and the build.

[@waynew2831]

Can you tell me about the vacuum line going to the modulator valve? Does the hard metal line have a check valve in it ? Can I run a line from the modulator valve to the manifold vacuum on carb?

[@bigfoot355]

This is great!

[@Adrianzx]

I cover up my ways whenever using abrasives

[@promobass77]

very cool!

[@danielharmes8799]

Can you tell me do all converters fit early and late 4l80e's looks like there is a differance in hub height. I have a hughes 25 25L which has a 2" hub hieght and there telling me it won't work in a late 4l80e any ideas. Cheers

[@ddmorphballzz2651]

What did u add to the tranny fluid to make it thicker. Brushed on nice. I'm about to start a th400 build and want to mix some up

[@cameron878]

STP oil treatment

[@billbaggins9961]

this is exactly why I would pay for this service. I was lost after the first snap ring!

[@BoostedCyclePerformance]

I’m surprised no one has lost their mind about the lathe cutting in reverse.

[@cameron878]

When was it cutting in reverse? Or do you mean the feed?

[@jsmcortina]

Increasing the i/d of the steels.

[@BoostedCyclePerformance]

@@cameron878 I meant the feed.

[@funfun8095]

Why do you use steel sealing rings instead of teflon? I never use the steel ones.

[@mtedwards78]

I'm pretty sure those are 4L80e "PEEK" teflon rings. They are dark and can look like iron, but they don't interlock like the stock th400 cast iron rings do.

[@funfun8095]

@@mtedwards78 Those are interlocking the same as stock.

[@cameron878]

Mike is right, they're from an 80e. They are not steel.

[@funfun8095]

@@cameron878 Have never heard of them. I use the solid Teflon or scarf cut Teflon.

[@cameron878]

@@funfun8095 I save one from every 4L80e performance build (the one you leave off for dual feeding) and I use them on 400s if I have 5 saved up.

[@mikeschreifer5819]

I want one how much?

[@hartiaacres]

whats the ball park cost for the parts used for this build??

[@cameron878]

3k-35 just for parts

[@CogswellRacing]

What do you charge for a 2 speed like this

[@cameron878]

This is for a buddy, we mostly do stock rebuilds, and the occasional hot rod unit for a local racer. We don't have a dyno so we don't like shipping out units, too much risk. Grady farrer (the guy who designed the brake I used) might be your guy

[@mikefoley7561]

Was looking into buying some parts from them but no parts page anywhere. What gives

[@cameron878]

Www.coanracing.com

[@prostreethustler239]

and The cost of that build

[@cameron878]

Free for my good friend that does a lot of fab work for me for less money than he should.

[@prostreethustler239]

@@cameron878 Nice now thats a buddy so what would it cost to build that trans ?

[@cameron878]

@@prostreethustler239 it has a lot of nice parts and time. Bellhousing, super drum, billet input and main, billet hub, two speed, and dump. Probably in the $5000 range if I were to do another one for someone local.

[@tommywilliams5135]

That's good price on that trans

[@accuratetowing8607]

Price To Build ?

[@cameron878]

This was a build for a good friend, I've never priced one out for a retail job, he had some of these parts already so that offset the cost greatly. This is probably a $4500-$5000 build if I were to do one in the future though.

[@bretteinhorn8507]

Chevy powerglide lol

[@cameron878]

Kinda, this is a little stronger for less money

[@bretteinhorn8507]

@Cameron Vic are you Denmah Cameron?

[@keysautorepair6038]

Many mistakes are made building this transmission.

[@cameron878]

I don't doubt that! Lol. Do you have any suggestions?

[@keltecfan]

Or perhaps you have taken the time to video yourself building a similar TH400 and can show us all the correct way? Link please?

[@onetransmission7871]

Just so you know you cheated a little on your video. Few mistakes in there also.😊

[@peterhinds9057]

She is so annoyng