Cheek Riser Introduction and Install - Finally, an Affordable Accuracy Upgrade

[@robertsalyers1351]

I purchased this for my Tikka t1x 22lr and I Love it

[@mountaintacticalcompany]

Awesome!

[@achap6376]

Appreciate the quality products your company produces all the while taking the time to make good instructional videos. Repeat customer here and more to come.

[@mountaintacticalcompany]

Thank you for your business!

[@theweek-ender8908]

Ordered and received across the country in 3 days. Got a new scope this year, and needed simple, lightweight, and slim. This is probably the easiest, simplest addition to my Ruger American 308. Installed and set in less than 5 mins. Much more comfortable than I had thought, 100% recommend.

[@mountaintacticalcompany]

Epic! Thank you for your business!

[@Outdoor-Tactics]

Nice. Might be picking one up for my Christensen Mesa in 6.5 PRC

[@mountaintacticalcompany]

Nice! Be sure to check out our carbon fiber ones on our site. One of those would look sick on a Mesa

[@teacheng3795]

helpful video but shard to listen to the narration with that godawful and distracting 'music' in the background. Very intrusive, distracting, and adds nothing to the video except a big annoyance factor.

[@mountaintacticalcompany]

Don't worry. We did it just to annoy you, haha! Our job here is done.

[@teacheng3795]

@@mountaintacticalcompany Yeah that's what I thought!😃

[@IGuppieI]

Is there any issue with foam filled stocks like the Tikka Roughtech that was shown at the beginning?

[@mountaintacticalcompany]

Not at all!

[@IGuppieI]

@@mountaintacticalcompany Do you just drill through the inner foam like normal or do the carriage bolt clear it?

[@anon_laughing_man]

I was going to buy the Matthews Fabrication Kydex cheek riser for my Savage Axis II XP in .308 till I saw this. The knobs on the Matthews Fabrication one are ugly af. Holy crap. LOL WTF? The low profile bolts of this cheek riser are slick. I will buy soon.

[@mountaintacticalcompany]

Fantastic! If you have any questions, you can reach out to the shop at 406-595-1970

[@buzby80]

Mathews Fabrication offers low profile hardware also.

[@MatthewsFabrication]

Matthew's Fabrication Cheek has low Profile Allen Key Hardware & has for many years & only needs one drill bit too install. This product also looks very similar to my X2 Style Cheek Riser. My X2 style Cheek Riser with low profile Allen Key Hardware is $46 with free shipping & molded to fit many different stocks for a perfect fit. This is $57 shipped & only fits Tikka or smaller stocks.

[@BigGamePursuit]

What if my stock is Monte Carlo?

[@mountaintacticalcompany]

You can heat it up a little to shape it to your stock.

[@M81Daddy]

Could I use this on a Stoeger M3000 stock?

[@mountaintacticalcompany]

As long as there are no components for the auto loading mechanism in the butt stock, there would be no problem installing this cheek riser. I'm not well versed on the Stoeger internals.

[@tatewilson7678]

What is the inside width of this? I dont see that dimension on any websites

[@mountaintacticalcompany]

Call the shop and Jeff can get that dimension for you. It's flexible and we have not found a stock yet that it will not fit.

[@dwaynegaskin8570]

So these wouldn't work for left handed shooters ?

[@mountaintacticalcompany]

Why wouldn't they?

[@johnstewart2011]

Good video, but I cannot fathom why instructional guidance like this must include loud background music. I would think that anyone who is mature enough to want to learn how to properly install such a product on a gun would have a long enough attention span to view it without the dubious entertainment that annoys my wife in the other room.

[@mountaintacticalcompany]

We did it just to annoy you and your wife. No other reason 😉

[@johnstewart2011]

@@mountaintacticalcompany Well, all right then: As long as you had a GOOD reason. ;-)

[@mountaintacticalcompany]

@@johnstewart2011 we do what we can 🤣

[@Extort713]

You should really update your links on old videos.

[@mountaintacticalcompany]

Www.mountaintactical.com has not gone anywhere

[@That1guy_Jeff]

Will this work with a Monte Carlo stock?

[@mountaintacticalcompany]

It would work, but the lines of the stock would change quite a bit. You'd lose that classic Monte Carlo look

[@TherapyRange]

They are full of crap. This will NOT work on a monte carlo stock. Sales must be terrible to lie to you over it.

[@kalindanley2843]

and this is totally fine for a carbon fiber stock?

[@mountaintacticalcompany]

It will work, but we recommend a competent gunsmith install it.

[@chuckbeickel1370]

I want one of these.... Trying to find your website so I can order it.... I have been scammed lately on powder and I don't want any more surprises.

[@mountaintacticalcompany]

Www.tikkaperformance.com

[@mountaintacticalcompany]

Or you can go through midwayusa.com brownells.com eurooptic.com midwestgunworks.com They all have our products as well

[@mastertater87]

Why are these out of stock everywhere?

[@mountaintacticalcompany]

Because they are incredibly popular and sell out as soon as we make them. Check with the shop to find out when the next shipment goes out. Www.mountaintactical.com

[@renatosureal]

🙏👏👍practical, simple... effective!!

[@nathan3856]

Does this feel as uncomfortable as it looks?

[@mountaintacticalcompany]

Yes. We purposely manufacture the most uncomfortable components possible to make our customer's experience as miserable as possible. That's why we are so successful.

[@robertsalyers1351]

Yes, it's very comfortable and it's a Great product

[@elpete77]

Why the frick is this frickin age restricted, KZbin?

[@mountaintacticalcompany]

Exactly... YT Age Restricted all of our videos last week... PITA!!!!

[@rnuk5609]

He missed one very important step when offering the cheek riser up. He should have fitted the bolt to ensure that it had room to move fully back and not foul the cheek riser, forget to do this and you could end up with a stock with multiple holes!

[@mountaintacticalcompany]

That point was not missed. Watch the video again and listen

[@rnuk5609]

@@mountaintacticalcompany My apologies, I missed that bit!

[@mountaintacticalcompany]

@@rnuk5609 No worries!

[@jamesc6137]

He still should have but the bolt in and worked it back and forth so the viewer sees the visual concerning that. Just a quick mention as he does flies right past many people and more than a few will absolutely f$&@ up their stocks not being able to open their bolts fully.

[@kalindanley2843]

@@jamesc6137 Its always good to try and reach all of the community including the left handers, hard of hear or deaf etc. Closed captions was clear enough for me but I could see the wording understood differently to some, as the function or safety and not the direct contact of bolt. this is just my 2cents, you can never get enough constructive criticisms. Lets not forget the people from the south who had little left of the gene pool after the civil war, they will need very clear instruction.

[@Eric-bh7jy]

$50 for a piece of plastic is a rip off.. I’ll buy the Amazon knock off for $30

[@mountaintacticalcompany]

Ah! The plight of the ignorant must be exhausting

[@Eric-bh7jy]

@@mountaintacticalcompany Hahaha. I can literally make the exact same thing for $17 in parts. Your margins are way over the top since it should cost even less to make. Ignorance is people taking up the butt for a gun part made with inexpensive materials.

[@HuguesLEVADE]

Hello, dear Mountain tactical team, I try to reach you by e-mail and phone without succes. I have placed an order online web shop but face an issue. Account debited but no order confirmation. I have left 2 messages on Jeff voice mail. Nobody call me back. Could you please help? THANKS A LOT

[@mountaintacticalcompany]

Jeff answers the phone and email all day. Check your spam folder. A confirmation email goes out on all orders. The shop phone number is 406-595-1970 and Jeff can be reached at [e-mail]

[@HuguesLEVADE]

@@mountaintacticalcompany Thanks. I will try e-mail. Thank you so much for you quick answer. Best Regards