This is a suggested way to form the TAC PRO cheek rest kit. Available at www.tacpro.com. If you have another way to do this, please post your suggestion here.
Пікірлер: 22
@r123brown2 жыл бұрын
Thanks for sharing
@GH-py5mu7 жыл бұрын
nice👍
@OnlineGameLover10 жыл бұрын
Seems easy enough, wont the kydex plate slide down after a while?
@stavrosliveris-oo2di3 ай бұрын
How/with what do you heat the kydex? Thanks for sharing.
@pedropons20408 жыл бұрын
how did you drill the holes accurately? Does the kit arrive with a pattern to facilitate drilling the holes in the correct positions?
@tacpro44108 жыл бұрын
+Pedro Pons Drilling the holes does not require a pattern, measuring or marking. The TAC PRO kit includes a drill bushing that is used to align the drill bit in the slots after you form the cheek rest. The installation video is here: tacpro.com/product_info.php?cPath=14&products_id=20
@Mex_the_Fox4 жыл бұрын
you could heatmold it, and then fill the holes with a sharpie pen... then drill into the markings
@AaronBrand Жыл бұрын
I just cut my own from a rectangle of kydex that I ordered. I noticed that my stock tapers out toward the butt end, so I made the sides angle very slightly out. I guess it’s not enough to make a difference. This one looks good once it’s installed.
@tacpro441010 жыл бұрын
The cheek rest will not slide if it's formed according to the video and installed correctly. See the installation video for instructions. We now include a drill bushing with each cheek rest kit to make installation much easier.
@209chevymon7 жыл бұрын
what gauge kydex is that your using???
@rdwhite658 жыл бұрын
Will it work on a Savage 110 HS stock that is 1 3\4 inch thick ? Or will the slots in the kydex be to high up on the stock ?
@tacpro44108 жыл бұрын
+RDW 65 It will work well, but a better option is our precision formed cheek rest made for the HS Precision stock. Model CR-700HS. tacpro.com/product_info.php?cPath=14&products_id=21
@stavrosliveris-oo2di3 ай бұрын
Where can i get one of those please?
@mikerupp75815 жыл бұрын
Cheek res black?
@jench789 жыл бұрын
how much more complicated is this for monte carlo stocks?
@tacpro44108 жыл бұрын
jench78 We don't recommend this product for stocks that have a Monte Carlo cheek rest.
@SchecterMongoose8 жыл бұрын
Can the heat from the Kydex being pressed onto a wood stock do any damage? Burning, cracked finish, lifting the stain, ect?
@tacpro44108 жыл бұрын
+Mongoose Motovlog We have not heard of any problems with forming the Kydex ona wood stock.
@cazaconaire8464 Жыл бұрын
No, not hot enough
@bummysop8 жыл бұрын
how to make or how to install???
@skycrafts51402 жыл бұрын
I think both apply here. The original plate isn't a cheek piece because of the shape. He had to 'make' the flat plate into a cheek piece, using heat and moulding it. He then showed how to use the bolts and nuts to 'install' and adjust the cheek piece he had 'made'. He showed us a technique that others could use to make a bespoke cheek piece for their individual rifles....and how to install them.