DIY how to fit adjustable cheek piece comb riser hardware into a target rifle stock

part 3 of the air arms s200 repair and upgrade series.
here i fit an adjustable cheek comb riser kit for hft and target shooting
part 4 will be making up a new hamster kit.

[@ianwoods1384]

Hello my friend, Thank you for posting your footage of your adjustable cheek piece install. I've watched it in my works canteen with the sound off. You've shown people what can be achieved without a big machine shop. With a bit of will and fore thought it's surprising what can be done. Thank you.

[@tonyashton780]

This was just brilliant I can see it costing me money in the long term.My S200 action is fully customised but the stock is standard.I can see my dream stock now with adjustable butt pad stipling on fore end and whole of pistol grip with finger grooves,different finish and some wood removed to open out the trigger area.I shall be following these closely nice work.All the best Tony

[@NoirCordis]

Another fascinating insight into how stocks get made / modified

[@tillysgunstocks]

This Is a nice easy one, when I'm more competent with the filming I will do one of the really involved builds. Some can be super tricky to do 😀

[@jameshowlin1460]

Brilliant as usual Tommy... well done mucka!

[@kevinamezquita654]

Well done, clean and aligned.

[@simonDon6645]

Nice work - looking forward to the next cheek riser vid 👍

[@Woodgate425]

Excellent video and it makes me want to have ago with my S200. Thanks buddy!

[@meteor177]

Bloody cracking little rifles,,so underestimated

[@Trideboy1970]

As always cracking vid 👌👍

[@garymurray5361]

As always, excellent 👍. I've a notion that this may be leading up to a UK yt shoot out 😉

[@tillysgunstocks]

I don't know about that mate 😆 Although tbh I never turn down a good excuse for a bit of fierce competition..

[@nicholls64]

Nice one, enjoyed that 👍

[@JS_Precision]

Nice clean job

[@JS_Precision]

Smart use of an overhand router with the jigs.

[@tillysgunstocks]

Over the winter I'll be doing a bunch of vids on some of the cool jigs and tooling I developed and use daily😉

[@juanmiguellerose4015]

Excelent work!

[@61paulc]

Great work… tell me this. Where can I purchase the riser kit?

[@gnarlyboot477]

Hi Great informative video, so I’m wondering if it’s possible to do the same customisation on my HW99S which I’ve recently purchased. I realise this the entry level Wauhrach but I love the simplicity of the gun. However the stock is very low for using a scope, it needs to be about 25mm higher. How would I go about getting an estimate from you?

[@paulcarruthers1314]

Do you do this commercially? I’ve a Wolverine R in walnut I’ve always wanted to have a riser on

[@olliedee]

Dude when's part 4?? Need to see it finished

[@tillysgunstocks]

I dug it out a while ago mate. Hopefully get some time to carry on with it sooner rather than later 😉

[@rgcrowman3188]

how do you know how big of a piece of wood to cut out to make the comb on any rifle or shotgun, is there a rule of thumb or a standard ?

[@tillysgunstocks]

Probably the most important considerations are how big would you need it to be,to be able to hold it safely once chopped off, to rework it and get any datum faces machined in. Then you need to consider how much of the cheek piece you use. It needs to be a bit larger than the touch points you use Then lastly you need to have it styled so it looks balanced and mean 😉

[@lalonexus30]

👉💯👍

[@performancemudmotors]

Who makes the hardware?

[@tillysgunstocks]

My mate audrius makes it in lithuania. He also sells them on ebay 😉

[@performancemudmotors]

@@tillysgunstocks what’s is the name of the part so I can look it up

[@tonyashton780]

Hi I don't do Facebook what's the best way to contact you regarding S200 customised stock cheers.Tony

[@tillysgunstocks]

Hi Tony , are you looking to have your existing factory stock modified or a custom one built?

[@tonyashton780]

@@tillysgunstocks Hi my existing stock modified Adjustable butt pad Whole pistol grip stippling Pistol grip finger grooves Last 1/3 rd of forend stippling Re finishing staining stock Matt oil finish I think that covers it.

[@tonyashton780]

Also anything you can do or recommend to remove wood around front of the trigger guard as I have big mitts.

[@tillysgunstocks]

@@tonyashton780 are you on the new airgunforum ? There's a couple of fellas that could do exactly what you need. Regards the trigger guard/removing wood when I get this stock done and built up I'll show you how I modified the action to remove the factory trigger guard entirely. I'll be making a similar replacement to what you'd see on the hft500 but it allows you to open up the slot a lot and modify the lead in to the trigger. Especially useful for larger hands. And it also Increases the footprint of the action in the stock and makes it all a lot more solid 😉

[@tonyashton780]

@@tillysgunstocks No I don't really do forums or social media.The only people I have dealt with are Tony Wall at Sandwell & Phil Crampton at Rat Works.Two names kept cropping up regarding stocks your good self and Warren Edwards I believe.I only deal with recommended people!,can't be dealing with Fred in a shed and poor workmanship and two year waits.I have dealt with Air Arms for years and Claire and her team always deliver.

[@theunofficialresults231]

Hardware link?? Can't find on ebay.

[@tillysgunstocks]

Currently there's none listed. The guy who makes them is moving workshops so hopefully back up and running in the next few weeks 😉

[@mikalvesper1772]

Is the hardware available

[@briansmith6862]

Nice job, but you like the smell of beech! Beech sawdust is one of the most carcinogenic substances known!

[@aleksandarrac7106]

Auuu, brate ala ga pretera!!! Pa nije to nuklearna fizika. I potpuno nepotrebno si zakomplikovao stvar. Gomila ljudi će odustati od svega gledajući ovo. Ali ti ćeš kao ,,stručnjak" imati više posla !!!