Chevrolet Silverado and GMC Sierra PRODUCTION

Full Size Truck Production
2020-2021 Chevrolet Silverado 1500
2020-2021 GMC Sierra 1500
General Motors Fort Wayne Plant
Roanoke, Indiana
May 2019
Thanks for watching
Subscribe: goo.gl/5i54Vg
Shop: bit.ly/2TkD8va
Instagram: / youcar_official
Facebook: / youcarpress
🎧 Music by Greg Saleh: cutt.ly/Iwdxeq Join us to enjoy exclusive benefits:
/ @youcartv

[@michaelcarley7016]

Hat's off to the engineers who designed that robotic assembly plant and the millwrights who obviously keep it maintained. Totally impressive!

[@hunkydude322]

the price tags on those trucks are impressive too.

[@arewecrazyyet]

You mean programmers and engineers.

[@marclaforest7379]

electricians too

[@BIGBADWOOD]

2020 Chevrolet Silverado Butt ugly Truck of the year ! Hats off to the design engineers for this abortion !

[@eliuloarte993]

Ya mean the robots took the humans jobs

[@HeavyChevy32]

Those are some nice rear axles you guys are putting in there! Thanks for keeping me employed!! Love GM! Been a Chevy fan all my life!

[@XxpurpleandgoldxX]

I was too, till I started working on em

[@GS-zc4sk]

I wish the Quality was there

[@spicyrensgaming6075]

I prefer GMC over Chevys, but as of lately I would say Ford and Toyota is the way to go.

[@XxpurpleandgoldxX]

@@spicyrensgaming6075 gmc and Chevy are basically the same frame, the Sierra and silverado use the same frame so do the Acadias and canyons

[@airdave1961]

so you have one of these trucks

[@chevtruck1000]

My 1994 Silverado had a bit over 586 thousand on the odometer when a head gasket let go. I took one look at the new models and have decided that for the price they want I can do a complete restoration, have $40,000 left and have another 25 years to think about what I should spend it on.

[@michaelcarley7016]

Yeah, but these new trucks are so magnificent and you only live once, lighten up and go buy one! I did!

[@chevtruck1000]

@@michaelcarley7016 If I could find an extended cab short box 2wd light duty 3/4 ton with a turbo diesel in it then I might do that. Only 1% of the 1994 production run has the configuration I've got, maybe I'll hang on to it for a bit.

[@futuregohan9662]

@@michaelcarley7016 new chevy are hunk of plastic garbage

[@firebirdlover4460]

333,000 on my 06 and she's still kicking ass. Built right there in that plant. Paid 21k for her. The same model today sells for over 40k .

[@gone9677]

John Marston lol 😂 it’s alll bout the ramreezy

[@williamelam6754]

I must love trucks. I can’t believe I jus sat here and used up 11 minutes of my life watching truck assembly lol

[@hunkydude322]

i use to work for Fisher Body in here in Michigan its awesome watching these robots, and the robots don't talk back to the foreman either.

[@Bart12349]

Good. Keep buying these gmc, chevy junk boxes.

[@andybub45]

@@Bart12349 And you keep buying your Ford/Ram junk boxes.

[@cesarurzua8234]

@@andybub45 face it, gm quality as of 2020 is 👎🏽👎🏽

[@losguzman01]

This video makes me want to buy a GM truck, this will actually be my first. Hopefully I can get a Carthartt edition or AT4. Made in 🇺🇸 I love it.

[@3833lee]

Be careful a lot of them are made in Mexico..

[@SmittySmithsonite]

They aren't built like they used to be. I bought a brand new 2007 extended cab 4x4 Silverado 1500 with the 5.3 - nothing but trouble since day one. I'm only at 107k miles right now and have already replaced the rear differential and transmission. Engine should be failing any day now, and transfer case has a loud clunk on a 1-2 upshift - noise started at 2k miles and has steadily become louder as the years go by. Brakes were replaced 5x under warranty for pulsation, ball joints didn't even make it to 40k miles, and engine started burning oil at 50k miles. Nothing built today is any good anymore. We still own a '86 Grand Marquis with 275k miles on the ORIGINAL driveline from front to back. Even still has the original in-tank electric fuel pump! There's nothing built this good anymore, unfortunately.

[@robertpowers1045]

Watching these Silverados being built with machines, it was suddenly so clear. The machine would never stop. It would never leave him. It would never hurt him, never shout at him, or get drunk and hit him, or say it was too busy to spend time with him. It would always be there. And it would die to protect him. Of all the would-be workers who came and went over the years, this thing, this machine was the only one that measured up. In an insane world, it was the sanest choice.

[@gunsightmtn.1821]

robert powers 👍😎

[@StevenPfeiffer]

Until they break.

[@gunsightmtn.1821]

robert powers did you catch my emoji reference? Ooh I just edited it to make it better… Let me know.

[@robertpowers1045]

Gunsight...yes terminator 2 sunglasses

[@jeffl1460]

Ill be back

[@leviwoodring6101]

Would love to see footage of them getting built in the 60s and 70s with out any of the automaton

[@WClark-lp9vc]

Grandpa had a 77 Silverado. You couldn’t kill that truck. Best built back then.

[@chumbawaumbacumpa]

@@WClark-lp9vc Silverado was a trim level up until the 1999 model year. Before that, Chevy’s full size trucks were the C/K series. C designating 2WD, and K designating 4WD.

[@nashrivas9718]

UAW FTW

[@sharkskin3448]

@@nashrivas9718 really? Do they really care? I hope so. Everything is so expensive now. A pick up truck for my business is my livelihood. I can't afford the mistake of buying something poorly built.

[@nashrivas9718]

@@sharkskin3448 UAW doesn’t design these vehicles. GM engineering does. GM also decides pricing. UAW folks just follow directions and do their jobs.

[@dctex9999]

Great trucks; I cannot imagine the time it takes to set up all of those robots and coordinate all that assembly but it is impressive!!

[@jeffolinger402]

They should of showed the people in trim doing their jobs, but overall a great video...brought back some proud moments of all the years I spent at G.M. / O.K.C. God is good! Thank you Generous Motors!

[@BrianWood74]

As a detailer at a Chevrolet dealership I can tell you now, they need to step up their paint game. We get them off the trucks with swirls, air bubbles and other debris under the clearcoat/paint.

[@Momo7O7]

Hey My man's, what does a detailer do?

[@TheoneandonlyJobis]

That "made in Mexico" quality.

[@boostedart88]

Joe trucks made in Mexico are better and they have more sportier options from factory to

[@hunkydude322]

yeah, you better let the big shots know at the plants so they can address the issue for sure if GM wants to stay competative.

[@coltonjacobs5383]

Boostedart last time I checked Chevys have worse QC than ever

[@donniebahama]

just bought one of these...cool to see where it was built and the people who work there

[@Mrrlamb1]

Thanks to these hard-working Americans for their attention to detail and pride... I honestly don't mind paying a little extra for a quality product made here in the U.S. 🇺🇸

[@Mrrlamb1]

@Robert Them too... made in China

[@tdcurrie3579]

Took a tour of the Oshawa truck assembly 30 years ago. What a change has taken place in these plants

[@jaylara2592]

Lll

[@Abbittibbi]

So this is how and where my High Country was built, thank you!

[@dnova1869]

I'd like the job of driving the finshed product.

[@jspin1103]

It gets old.

[@Oozywolf]

@@jspin1103 I love getting in my truck every day 👀

[@gnesmond]

Jack Cooper shipping drives them right out of the place when they are done. I have a couple buddies that work there.

[@jspin1103]

@@gnesmond yup, bottom of the barrel, lowest bid carhaulers. Perfect for GM.

[@gnesmond]

@@jspin1103 they also do delivery for Toyota and Ford, and other manufacturers.

[@Tomgillchevy]

I could watch these videos all day long!

[@russellbecker671]

Yea it's amazing seeing 64 year old guys pack up items for shipping. Thanks union for never needing any advancement

[@johnleavitt2315]

@Tom Gill Chevrolet.... Yeahhhhh , cuz it's sooooo dreamy watching Corporate automate jobs away from Americans while you sit in your bonded leather office chair watching these stupid videos and abetting these corporate assholes in hijacking Americans into paying almost 100K for a robot built POS truck thats only worth 20 K at best . Of course Americans are also complicit in their own stupidity and demise so they reap what they have sown upon themselves .

[@hunkydude322]

i use to work for Fisher Body in Michigan, i miss the people not the work.

[@airdave1961]

no life

[@jingorat]

Funny, they're all into robots saving money yet in the last 30 yrs, an average domestic made vehicle has gone from 1/3 of a family's yearly income cost to half of a family's yearly income cost. Maybe if the GM wanted to save more they should robotize the board of directors and CEO. Then they would truly save millions.

[@dmax5678]

@Wypipo Trippin right, in addition to that, a lot more safety and environmental technology is now required than it was 30 years ago.

[@protovack]

a new truck these days lasts way longer and is much more reliable than 30 years ago. It has way more power, more comfortable, and FAR far safer. I'd say that's worth it but you do have a point, what does all that matter if the average person can't afford it?

[@spunbearing65]

Fire all execs who smuggled out robots to take care of their wives while they dick around upstairs. Its a Misapropriation of company property and that shit has to stop

[@SuperBooboo02]

that's true of all the manufacturers, not just GM, plus the cost of raw materials, and all the required safety equipment costs a fortune.....

[@williamparada4630]

Yea just to drive 50000 miles and start worrying about minor shit to fix

[@justarandomfishguy8868]

I dont only see cars, more importantly, I see hardworking people. respects.

[@charliehippler770]

Man, even though this is a Chevy plant, Henry would be amazed at how far his ideas on assembly have come.

[@anonymoushippopotamus345]

For all the comments about the robots, over 4000 people work in that plant. There's a bunch of trim work you don't see. The robots are doing the dangerous time consuming work...welding, painting, and sealing.

[@Scotts_Blocks]

Yeeeeuuuppp!!! Was just thinking we need more factories like this. Its beyond sad what happened to Detroit. Bring more factory jobs to American!

[@user-zt6bt8dp2c]

kc mac how long before GM closes this factory and sends to China.

[@anonymoushippopotamus345]

@@user-zt6bt8dp2c I would say somewhere around NEVER!

[@ScreamingGravel]

@Jerry Moody but unions build america rofl?

[@Jimmyxsx]

flyhound97 wrong robots make mistakes too and they break down🤷‍♂️

[@doogie64]

35 years ago the union demanded a guy get paid $18 an hour to sweep floors. I’m so glad it worked out for the robots.

[@doogie64]

And the robot demands nothing.

[@howardburleigh3568]

@To the point. Which means they actually demanded more and settled for less...

[@Rypie89]

One of the job requirements at GM.. Are you able to lift up to 3 Lbs.?

[@realseal62]

You mean are you able to lift 12 ounces on your breaks.

[@punker4Real]

@@realseal62 can oyu smoke crack or weed is another one

[@idkwhyiam9440]

@@realseal62 i prefer 20 oz

[@coltonjacobs5383]

No, “Can you lift a red toolbox that’s in a truck bed?”

[@homersimpson6144]

Congrats to Marlon on his new Chevy. He writes, "It was because of you guys that me and my wife decided to get a 2021 Chevy Silverado LT Z71 Trail Boss (with the 6.2L of course). I get the fact that there are other trucks out there with more technology, and considered more luxurious, but for me and my family this truck ticked enough boxes to fit perfect in our driveway. Thank you once again fellas, and keep the great content coming." You are most welcome, that's one badass midnight black Silverado.

[@Alexander-lt6es]

A Ford commercial aired while I was watching this

[@audleyboyd1]

Great job to the skilled trades that built this plant. Great job Lesco .

[@curtnicholson7771]

Well it's really nice to see a bunch of hard working Americans in a very well done video , instead of some lying politician who we see enough of on the news every night. But GM officials need to take a look at this video and say why didn't we pay for the advertising time that was going to be squeezed into this video, instead of letting ford sneak in there as they did. Makes me wish Dodge would have bought the time.

[@Thefemefatal]

Incredible step by step including all the people that work on and buff out little detalles or touch up. And even making sure the tail gate does what it’s sapposed to do the fifth time as it’s sapposed to the first time :). Wow!

[@Joesworldttv]

It's amazing how far technology has come.

[@Jose-C559]

Straight out the factory with dozens of recalls already..

[@dcyphrz8532]

Source?

[@coltonjacobs5383]

Dcyphrz GM just makes terrible vehicles

[@dcyphrz8532]

@@coltonjacobs5383 I assume you mean "terrible" quality wise versus personal taste. My experiences have been good overall. I've owned two GM vehicles that I consider to have design flaws. Beyond those, I've had good results with GM stuff. My Sierra's at 85k, haven't has the first squeak. Had a 90s S-10 truck that went almost 300k. - The previous post said there were dozens of recalls. I'd like to look into that.

[@garynewcomb8649]

Think they meant the recall because of robots doing the work!!! How many recalls did we have when people made cars, hardly any!!!

[@sldpf2113]

Coming from some one who works for gm and has access to the gm recalls they come out with little to no recalls and if they are its for petty stuff like the wrong manual in the car. Stick to your ford.

[@jrstrange123]

My 2003 GMC 2500 HD that several years ago paid close to $6k for at 102k miles drives and performs beautifully. Think I will keep it.

[@coltonjacobs5383]

Uh yeah you should. Chevy quality ain’t like it used to be

[@dieseldouche7735]

That's a hell of a deal for a 2500, even that old.

[@speedraser2605]

God bless our unions and their spirit. Support the working man and woman!

[@nhlcfl7733]

Educational and appreciation to all who engineer and design all the parts and pieces of components and the inner workings of the assembly plants (amazing how many robots are at work or assist in the movement of components for us humans 👍; obviously easier than it was 40, 70 or 100 years ago). Appreciate all the workers including those checking all the imperfections and such. I own a 2020 Chevy HD, and so thanks for sharing this. Buy North American 🇺🇸 🇨🇦.

[@helodriver20]

No humans. All I could think about was SKYNET.

[@aricwright7493]

Its coming in fast

[@ffarmchicken]

Soon. In more industries than you think. They are working on replacing simple repetitive labor jobs as fast as possible. Even McDonalds.

[@Jeremy_810]

Don't let the video fool you. I live in Fort Wayne and like everyone else in northeast Indiana, I know several people that are or have retired from the GM truck assembly plant. They aren't just assembled here. They are on the road everywhere here. It's not the same place anymore though. Since the financial crisis, it's temps with next to no chance of being hired in or gettng benefits replacing the old guard as they retire.

[@scottwilkins]

I saw plenty of humans. I guess you didn't watch the video.

[@TheQuirby]

UAW cost humans their job with the ridiculous demands and wages. The saddest part of it is the individuals that lost their jobs to robots never believed it would or could happen because they were stupid enough to believe in unions. Unions is what has destroyed a lot of manufacturing jobs

[@iainun]

i wanna see a supervisor reboot walking around and just tapping the robots “good job today” “i need to see you in my office”

[@Stinger030365]

I work at this plant.... we have over 3,400 workers. In the summer almost 4000

[@LynxStarAuto]

You guys get busier in the summer time?

[@helodriver20]

Doing great work. I love my 2017 Silverado.

[@semiauto3148]

How many is produced in an 8 hour shift ?

[@drunkmike9943]

There should be over 20,000 workers no robots

[@StevenPfeiffer]

Boeing has robots too.

[@randypullman1155]

Dang, i wanted to watch them skillfully apply the frame rust...

[@bret9741]

Thanks for the video. How insightful. I would love a detailed explanation of what everyone is doing, what kind of primers, paints etc.

[@chrisburgett728]

Paint is Axalta.

[@leviwoodring6101]

And if you seen the orange peel on new cars. This video explains why.

[@bret9741]

@@leviwoodring6101 I have owned several vehicles over the years that had orange peel paint texture. At first I was upset but after 200000 miles on two.... one was a Toyota forerunner and the other high mileage was a Tahoe. Anyway the orange peel seemed to hold up to chips and overall aging better than some of the vehicles that had perfect paint surfaces. I’m wondering if there is a scientific explanation.

[@112428]

@@bret9741 Orange peel is when too much paint is applied, and the surface layer dries before the paint can level. That's why it holds up better. The paint is thicker, but it looks worse.

[@maximusdominus2826]

Bruh these people deserve free cars lol

[@NWCPcbenchmarks]

they don't even let us buy "broken" parts, like if a radio touches the ground even if its not damaged in any way they throw them away or they sit at the bottom of a bin for the next 10 years

[@maximusdominus2826]

That's insane

[@NotKarter16]

Imagine watching this video then an ad comes up about how great ford is😂😂 Happened to me

[@kiroman911]

I got the female backing a Ford with a trailer commercial...lol

[@NotKarter16]

@@kiroman911 😂

[@columbothecat7225]

Love my 2019 Trail Boss. Nice to see where it was born.

[@mt1885]

*GM trucks are still better than the rest - way easier to upkeep and maintain than others*

[@blattelcattleco]

Too bad they’re fugly and full of girly metrosexual features that aren’t actually needed

[@brunopelletier36]

Rather buy Toyota, no need for easy repair when you buy something that’s actually built not to lol

[@jamesrichardson559]

Brand loyalty is everything. I can't believe anyone buys GM vehicles.

[@mt1885]

@Ucallit 71 I agree, Furds are epic hard to work on, special tools, and electrical nightmares.

[@mt1885]

@@jamesrichardson559 buy your FURDS then and enjoy your turdos and cam-chains

[@rogerlopez1745]

Good old made in the USA good job guys.

[@coltonjacobs5383]

And they are still shit

[@marcoaureliogoncalves9746]

TRABALHO HÁ 20 ANOS NESSA MONTADORA SAUDADES DA SILVERADO ANOS 2000 E 2001 AQUI EM BRAZIL

[@apkn1955]

I retired from the plant in Moraine Ohio. This brings back memories.

[@nightzu_]

Can see it all day long! Wont get enough of it.

[@Madscientist9898]

I wonder does the factory clunk and bang like my 2017 Silverado transmission?

[@elmedia1532]

Right, they need to fire the transmission vendor!!!

[@robertpontius1689]

I have a 2014 Malibu that does the same crap. It's done it since about 2 days after I bought it. The dealer says that they can't find anything wrong with it. At cruising speed, it'll jolt hard enough to almost put you into the windshield. It doesn't do it just once, but about a dozen times in a row before you can stop on the side if the road and gather yourself. Sad.

[@dansouthern4139]

So unreal. Great trucks.

[@jostrander71]

What an amazing factory, Henry Ford would be proud.

[@Rahul-op3ry]

Chevy trucks, the best. 😍

[@williemwangi4959]

Really? Ford makes the best trucks in my view

[@Rahul-op3ry]

@@williemwangi4959 Well that's your opinion. But I'm a Chevy fan..

[@williemwangi4959]

@@Rahul-op3ry Paji,everyone is entitled to his/her own opinion though..

[@act9246]

Lol.. Toyota by far makes the best trucks and cars for that matter... hate to say it but its true...

[@act9246]

@@byates59 I hear ya... I not only own a Chevy but I live full time in one! 05 Chevy express 3500. Roadtrek 190 popular...

[@artwithclement]

love your channel so much so many awesome cars and models🙂🙂🙂

[@danielwebb9306]

I like it back in the days when people built cars an trucks at least they last an took pride in the builds

[@andie371]

i know one of the worker in that video and his truck is a 2001 toyota tundra and he's still driving it

[@TheSkunk1996]

I want my Silverado!!!

[@coltonjacobs5383]

No you don’t , GM makes shit vehicles like they have been for the last decade and a half

[@user-yg8jw4uo6b]

الله يرزقناا ❤😫

[@user-sg5nf5jc6z]

والله اني علقت عند ذا المقطع مدري ليه 😭💜

[@Mantis202]

يارب ترزقنا والله خاطري فيه من زمان عساها تزين من عندك يارب 😔❤️💙

[@f84z59]

اييي والله هههههههههههههههههههههههههههههههههههههههههههههههههههههههههههه😭💔⁷.

[@Chris-jm4zk]

So do humans make the machines that make the machines? Also had to laugh at the Ford ad to start the video!

[@abeneufeld7901]

A whole new meaning to the word "UGLY"

[@jrighteous1984]

Man I never knew how much of the work is actually done by robots ..

[@stevenmente2717]

It's less than this made it seem. They skipped about 2/3rds of general assembly. There's still 4000 people working in that plant.

[@rycoy8208]

The old one looked way better

[@coltonjacobs5383]

jdslyman that’s because the c/k was built to last. GM is just so much worse than what they used to be

[@andybub45]

"tHe RObOtS arE tAkINg oUR jObS!!!!" 😂

[@Ang3l.25]

Jobs that humans can’t really do tho

[@mrdel7776]

That everybody in the factory has a job to put these truck together

[@dingram3588]

This was one of the coolest videos I have ever seen. Automation at it's best. Amazing at the thought that had to go into building this state of the art automotive plant.

[@dingram3588]

@Steve Simmons I will check it out. Thanks

[@ACatKrom]

where did you steal this video from, I want to see the version that is in order, not the one you edited into the wrong order to avoid piracy detection

[@Alexander-fr1kk]

My hat’s off to the guys who assemble the HD’s I had a ‘17 Z06 Vette and now a late ‘17 2500HD and the build quality is night and day!!! The truck is phenomenal whereas the Vette was riddled with sloppy defects!!! I’m still not too sure of the new looks of the HD’s though, wish they’d gone with the 1500 front end!!!

[@Rscmgw23]

Alexander... the HDs are not built at this plant. They are built in flint, Mi

[@fredpastuh7518]

Great Trucks!!!Thank you GMC!!!

[@shootingshark4375]

Show the Mexican GM factories where they only make 1.90 per hour.

[@jarodpickens859]

It's all Union there's nobody makes $8 an hour or a dollar fifty an hour in the Union

[@nxtgen2b416]

And still have to put a mortgage on your back to own one!

[@coltonjacobs5383]

rockytop roasters and adventures I can’t believe that Renault ruined such a good brand. The only decent vehicle Renault ever made was a tank from ww1.

[@xyjoshxy]

Its nice to see the automation. But why are these trucks so expensive? I hardly see people making the trucks

[@randyayo2846]

Machines aren’t cheap, materials, transportation, there are actually workers at that plant. Plus someone is willing to pay so why stop charging

[@xyjoshxy]

@@randyayo2846 that's true. I know there are people working at the plant. I just wish these nice trucks be a little cheaper

[@randyayo2846]

xyjoshxy Yea I’m with ya, I own a 2017 Sierra SLT got a deal and it still cost me 40, 44 or so with taxes. Kept my old 04 F-150 to use as my work truck so I can keep the new one clean and in decent shape.

[@hunkydude322]

yeah the people out getting drunk or high etc....... got to have the robots, more dependable LOL.

[@stevenmente2717]

The video skipped most of the people working on them. There's 4000 people who work in that plant. Also, the trucks are expensive because that's what the market wants. People want more features, more power, more towing capacity. All of that adds up. The fancy expensive ones are the ones that sell the best.

[@markgingerschreiber5996]

We just purchased a new 2020 GMC 1500 Sierra Denali, fully loaded. It is a wonderful machine. Thank you to the people in this video. Mark

[@kenprice1961]

Since the Chevrolet and the GMC are EXACTLY THE SAME, why did you elect to PAY MORE for the GMC??

[@MarkSchreiber84]

@@kenprice1961 They are NOT exactly the same.

[@MarkSchreiber84]

@@kenprice1961 The key word is Denali

[@Journeyman-Fixit]

Glad to see them made in the USA. My 2003 Sierra is still rolling along!

[@bradzimmerman3171]

Drive very still &slow - hit something and it's deadly for you crash testing proves it ( GM found that out with the BOOMER square body the gas tank explodes on contact )and they kept building the '73 to '86 never improving a thing

[@spacecadetzack]

That guy at 6:53 needs to guide that in more carefully. He’s just letting it swing around banging up the frame’s paint. Places that will rust later on...

[@coltonjacobs5383]

spacecadetzack it’s a GM factory? What did you expect? QC is not their specialty

[@jeepwonder]

Will that make the Silverado any less ugly?

[@rogerrussell9544]

@Thinker , From what angle?

[@rogerrussell9544]

@Thinker , I'm sorry, it's hard to take someone serious that can't notice what the front end looks like.

[@zombl337og]

i dont know what you mean, the GMC is the gawdy over flashy one. Like the Cadillac of trucks, to much unnecessary BS. The new Chevy front end is nice, but I do prefer the 2018 front end of the Chevy, so aggressive it makes my dick hard.

[@TheRamGuy]

Agree. They are the ugliest trucks on the road. At least they dropped the stupid ass square wheel wells

[@crossocean5663]

Lovely to see 80’s revived.

[@airdave1961]

80s revived? I have a 82. less rust than a 02. 40 year old truck. you see a 2010 in the scrap heep before one of these

[@arfachanneltrading]

ini merupakan konten yang menarik dan sangat bermanfaat, saya sangat mendukung channelnya untuk selalu eksis dan semoga sukses selalu yaa kak

[@maldog4303]

Amazing👍👍👍

[@treefiddy2470]

What if those robots started making other robots?

[@firebearva]

Oh AI is here, so they can have that ability...Hello Skynet!

[@somegoodmusic8840]

If those robot started making other robots they wouldn't get very far they only have Chevy parts

[@powderslayer]

@@somegoodmusic8840 fucking priceless....Good one 🤣

[@YoungHeartedSoul]

@@somegoodmusic8840 they would go to any car that GM makes an just throw another chevy part in it. The ford robots would just kill themselves, just like the mustangs aim for people.

[@somegoodmusic8840]

@@YoungHeartedSoul damn got the cap today but yea the ford ones would kill themselves having to go get parts every 10 mins

[@dannionm4475]

I inspect the front end on the Denali line up before they get sent here to be put together glad I'm apart of this process

[@ChrisDIYerOklahoma]

Is it true that the 6.2L will be available in all trim levels for 2020? Double cab Trail Boss LT with a 6.2L? You couldn't get that in 2019. Price it around $45K and they got a sale from me. Or maybe the GMC Sierra AT4 with a double cab and 6.2L

[@dgreene4234]

Have they solved their electrical problems yet?

[@AzizAlghamdi]

Be specific which one?

[@artificialdopamine6542]

This is not a Chrysler shop...

[@AzizAlghamdi]

@G hrvyck GM has electric problems all over their name. My dash has more lights than a Christmas tree! Buying GM was a bad bad decision. Never will happen again.

[@edwardtomlin8592]

Johnny Cash had it right one piece at a time then it wouldn't cost me a dime

[@user-fy4ln5cf4w]

wow great video thankyou🥰🥰

[@mrdel7776]

It's cool to see how these trucks were made

[@_Matsimus_]

Wonder how long these frames will last without rusting like all the other have been slowly. Shameful coating on ALL GM trucks.

[@jonathantyson8744]

They did manage to create a coating that after more than a decade will adhere itself to you if you brush against it and not come off......to bad it doesn’t stay on the frame that way.

[@deeeeeeps]

Agreed, i have a LBZ i don't drive in the winter and trying to wait until they move to all aluminum. If that time doesn't come I'm going Ford :-\

[@coltonjacobs5383]

GM doesn’t prepare for the long term. They make vehicles that are built to break so they can sell you another one

[@Ckcdillpickle]

@@deeeeeeps I doubt Ford uses aluminum frames

[@deeeeeeps]

@@Ckcdillpickle Probably not, but that usually won't fail anyway too thick.

[@77confusedzombie77]

Had a conversation with a master mechanic for GM. According to him, after the Government bailed out GM, the quality of the vehicles declined. Apparently by a lot. I asked why, and his reply was, "Well how the hell are they gonna the 20 million dollar salary for the CEO every year? They have to do away with some of the quality." That's why I will NEVER buy a new GM vehicle. Fuck that bullshit.

[@77confusedzombie77]

​@Mr Sunshines​Isn't Ford the only company that _didn't_ need a bailout? And can you provide a source for GM having paid their bailout?

[@michaelpicozzi3910]

I have noticed the lack of quality towards GM products it's all the way across the board with all models and makes after all said and done I'm loyal I'll stick with my GM

[@evertonantonioangelosouza5789]

GM, REINA ABSOLUTISSIMO, MAIOR FABRICANTE MUNDIAL

[@haigthomasbabaian6241]

I am always more fascinated by the fixtures and the design of them then the actual vehicle assembly. They must rework them every time there's a new design. I wonder how much of the equipment is actually recyclable in a model changeover

[@112428]

Robots are mostly reused. End effectors (what grabs the part) change. Unbolt the old, bolt on the new, upload the new path program.

[@warpig4942]

If you think the robots have stolen jobs you are nuts. Robots are there because some jobs they can do exactly the same and perfect every time, welding and painting being prime examples. The number of people it takes to program and maintain those robots is about the same as the people it used to take to do the actual job.

[@jonathantyson8744]

You have any factual data to add to your statement or is it merely opinion?

[@armyblouvet54]

Yes the paint looks absolutely horrible and full of orange peel. You have no clue what your talking about. Work in a collision shop and try color matching a vehicle never works. All the paint colors go threw the same pipes to paint robots so you end up with different variations and hues in the paint.

[@warpig4942]

@@armyblouvet54 The paint on new cars has always been orange peel, they don't sand anything, just blast on paint. A robot sprays the exact amount of paint in the exact pattern that it's programmed for, car after car after car. Humans cannot do that. By perfect I don't mean it's a perfect paint job, I just mean it does exactly what the engineers tell it to do.

[@elcuh9506]

only chevy i like is the new RST edition. The sierra is a beauty still

[@BrianWood74]

An the RST isn't anything more than badges. Seriously. We had one last week we dealer traded for, could not see anything special about it other than the single badge, even the wheels it had another standard LT on the lot had.

[@codyboggs4775]

Bro, is this guy wearing a sleeveless shirt? Whenever we have to retool these plants, we have to dress like juggernauts lol. I dream of working comfortably like that

[@masdestrong]

great machinery, great car

[@mrknotthall]

Contrast this plant with a Honda plant. The Honda workers all look professional with uniforms.

[@MikeNebgen]

Where were these QC guys when my 2013 came out of the factory with a half painted quarter panel?

[@MikeNebgen]

@Roscoe Dogg Never buy a car/truck at night. :-/

[@coltonjacobs5383]

That’s new GM for ya

[@Dennodq]

Did you order it from Amazon?

[@kenonbradford9433]

Those robots are amazing!

[@dinobusdriver7299]

Found it totally funny that one of the ads that ran during the video was for ford.

[@duane356]

darn, makes my 2019 Silverado look old, lol.

[@bk14nyc]

DUANE Osman makes my 2015 Silverado look even older lol 😝 but it’s a GREAT truck and I wouldn’t give it up for the world! 🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

[@JulianJohnston919]

I miss the days when Ford and Chevy were companies for the working man...

[@gliderider7077]

Well these don’t strike and cost millions in insurance + benefits ... thanks UAW

[@bird718]

4000+ people work at that factory

[@wesleygarrison6248]

People still have to maintain the machines lol

[@Hogwarts-Dropout]

GMC Sierra, the best looking truck on the road.

[@moodyman211]

Just took delivery of a beautiful new Loaded 2020 pearl white 6.2L Silverado LTZ beast...I love this thing! This video made it interesting.... What's even more interesting (and ironic as well) is that I build Ford f-150s here in Dearborn Mi. I chose the Chevy because I work in the final area and drive f-150s all the time in the dyno testing booth. Honestly I prefer the Silverado's looks over the F-150 anyway, besides Ford making the f-150s a bit too expensive even for us the ones who build them- the new 2021 exterior design isn't much different from the one it's replacing. I drove them both, but hands down I prefer the Silverado. The EcoBoost in the Ford is quick, but my 6.2L is rocket monster and serious fun to drive for a pickup.

[@IDAHOJAKE]

And non of the workers building these trucks can even afford to buy one

[@DP-pg5md]

Bs, if they save up they could

[@whackbag3606]

Don't think i could be the guy who drives them away at the end... I'd have to do a burnout with every one & be soo fired by days end.

[@weallsobad7320]

I did that job in the Oshawa Truck plant. Highest quality GM Truck plant & GM killed it in favor of Mexico. That job isn't really very enjoyable. You need to hustle your ass walking back to the end of the line. If you're 5 seconds late, it trips a switch & shuts down the line holding up hundreds of workers. Management will suspend your ass for a day, 3 days, a week 30 days or even terminate your job if your excuse wasn't acceptable. What may you ask was an acceptable reason for stopping production? Personal knowledge with this I can tell you there are only 2 reasons that I know of the management will accept without question. 1: Heart attack 2: Death. And I think they fought #1 a few times.

[@punker4Real]

That is the job i want to do

[@bradzimmerman3171]

All of them try it ,just doesn't happen to lame in that dept .

[@chrisburgett728]

@@weallsobad7320 I work at this plant in the shop that supplies your bodies. Before K2 when was the last time you built a truck? Hard to make the claim highest quality truck plant when for probably the last 10 years you have built cars and crossovers. With that said my son Totalled my wife's Equinox which was built in Oshawa and it kept him safe and I thank you all for the excellent job you guys did building it. I also love my 14 Camaro SS that you guys built!

[@112428]

@@chrisburgett728 Oshawa Truck Assembly closed in 2009. And Oshawa K2 trucks now have fewer options offered than when they were built in Fort Wayne. Less to screw up helps their quality too.

[@IndianaDiy]

Where the truck that gets 30 MPG?

[@stevenowens2200]

Awesome. Owned Chevy my whole life. Just got a 2020 Trail Boss in Iridescent Pearl. She’s nasty. #HeartbeatOfAmerica