China Tools Ep.15, Insanely low prices

[@escorza88]

Thank you for not turning your channel into a commercial as you mentioned on your video. I really appreciate your honesty, effort and time you put into your videos.

[@Peter-House-Jr]

I liked all of your China Tools videos - very fair and balanced. One additional thing about the angle finder - I am on my second one from Wixey - the first (from around 2000) used a 2032 coin cell and whenever the battery failed it caused a period of no use followed by a trip to the store. The second one I purchased when Wixey changed their design to use a much more standard and available AAA battery. I always have these around for replacement. I purchased the second one just because of the more available battery.

[@marklewus5468]

I just discovered your channel and I’m really enjoying it. I’ve been a woodworker for 40+ years, never really took Chinese tools seriously. But I was very impressed with the corner clamps and the 45 & 90 squares. Great value for money. Keep making these great videos!

[@Gringo8427]

Hello Dennis, thank you for your many China Tools videos that you shot, they saved me from some bad purchases, I am glad to have found you in the worlds of KZbin and I look forward to future videos from you. GREETINGS FROM SWITZERLAND Lars

[@frederickkeppers8791]

I love how HONEST your reviews are. As you have shown, the least expensive is often a very good choice for most craftsmen.

[@compressorsgenuineoriginal940]

Thank you Dennis for your excellent videos about woodworking tools from China. It is great.

[@rustythecat2163]

Appreciate your product reviews. I find the reviews straight forward, easy to follow, and without bias. Thank you.

[@Kolya_Smirnov]

I'm an expat living in China and I looked for the T-ruler on the local shopping websites. The first one I looked at uses your video to show how to use it. Haha! Very professional video editing.

[@rayanderson1870]

I have had a digital angle meter for a few years and find it an excellent tool for setting up my saws and also measuring angles for general carpentry. I think you are being a bit overly worried about the accuracy. I don't believe that many woodworkers are measuring angles to an accuracy of 0.1 degrees. I have only recently found your channel and appreciate the content I have seen so far. Thank you.

[@johnathanball3344]

Dennis, I’ve just come across you recently. You are Flemish? I’m British/South African and I watched some of your other videos and understood you perfectly. Now that’s normally difficult if you Dutch. Your shop, videos, delivery and production are a joy. Thank you so much. Please tell us a little about yourself. It makes a connection for us viewers. Keep up the good work and thank you again

[@jonathanpartsch]

Thank you! I just now discovered your channel and your China Tools series when I was struggling with whether I should order some inexpensive tools from China during the 11.11 sale for the woodworking shop I am setting up.

[@philreasoner7922]

I received the kerf maker two weeks ago and it's build quality is top notch. Totally agree it's a #1 helpful tool - worth it at full price even!

[@MrCubflyer]

Just found your channel great review thanks for going into detail on why you like a particular tool.

[@henkvis]

Great channel! I also invested some more of my dimes in China tools. Actually due to the additional discounts from you and 11.11. Great tips and advice. Thumbs up for your channel.

[@priayief]

First time here. Enjoyable and informative. I'll be back. Thanks.

[@onsapplikasies8620]

Received the clamps I bought based on the review in this video. Very happy with the quality and have now used them on several projects. Thanks Dennis for the honest review you did that helped me make a decision on whether or not I should buy them.

[@HookedonWood]

Thanks, I am happy to hear that!

[@noodldoodl1970]

Happy belated birthday to me for finding your channel, Dennis. I've been looking at Chinese woodworking stuff for a while and your recommendations will go a long way in convincing me to buy some. Many thanks and instant subscription to your channel!

[@HookedonWood]

welcome! nice to have you on board.

[@HyperactiveNeuron]

Excellent as always. I recently received a set of the New brand dog hole table clamps which are a clone... If not made in the same factory... As the Festool dog hole table clamps. The quality and build is so much more than I expected and at only $37 ($30 with the 11/11 sale) for a set of 2 vs $125 or more (depending on vendor) for the Festool clamps... It's a no brainier. I'll definitely be interested in more from this brand.

[@HyperactiveNeuron]

[US$29.54 41% OFF]2pcs Quick Ratchet Release Speed Squeeze Woodworking Clamp Clip Kit Spreader Gadget Tool DIY Tool Accessories from Tools on banggood banggood.app.link/35PqGl9jlbb

[@adamdearing918]

Excellent video and advice as always, thanks very much Dennis. I hope you get a good kickback from the sales as I have just spent a small fortune from your links! Lol. To be completely honest, I haven’t come across their 11:11 deals before and then add in the group buys, slash deals and other ways to save, the amount of gear I have purchased for the money I have spent is absolutely amazing!!! Thanks again Dennis, and I hope everyone has has used your links and at least bought one item. You deserve it for spending your time and effort testing, reviewing, videoing and editing. Not to mention the money you have spent buying some of the items out of your own pocket! Hope you and your family are well and staying safe!

[@HookedonWood]

Thanks Adam, appreciate you comment.

[@sovvan7873]

Love the reviews as they seems honest and fair. Have now bought 5 items from banggood based on your reviews. I missed the 11.11 festival otherwise I would have bought more! Thank you for making these videos.

[@RebiRebell238]

I just wanted to say that I am so happy to have found your videos!! I also live in the Netherlands, and you are the first woodworker I have found that has experience here :)) I love this series especially because I am a student and love to save money. Keep up the good work!

[@Nuno.Soares.GeoTagXplorer]

This is great! I recently discovered your channel and I've seen all of your China Tools series. I can also say that you have helped me allot on deciding which tools to get and some of them are already on their way. Keep these videos coming. I truly appreciate them. Greetings from Portugal!

[@TheChopcat]

The problem appears to be availability at the moment (2023). My various tools have been on order from Banggood for over 3 months now with no sign that they will ship any time soon. The only one that has arrived is the pocket hole jig. So if you need to get on with things check stock before ordering.

[@paulrowley71]

Another great episode Dennis and congratulations on reaching number 15. Some amazing prices on superb products there! 👍🏼

[@paulrowley71]

Just ordered the corner clamps and t square. 😊👍🏼

[@stefandegroot1019]

Dennis, super bedankt, al je filmpjes steeds gevolgd en nu met deze actiedagen de precision square, miter square en t-ruler aangeschaft, vooral ook om jou een klein steuntje in de rug te geven en m'n tools uit te breiden uiteraard. :)

[@HookedonWood]

Thanks Stefan. veel plezier ermee. Ik vind het echt een heel mooi product.

[@Ivanskrakow]

I use the smaller level to measure slope of tubing that must be at a minimum, or the fluid will not drain.. This is for Pharmaceuticals, so it is important.

[@johnnybro61]

i have the handle jig ,its was great at the start for doing kitchen doors ,i set ,then drill through the hole but after a few uses the screw that holds the jig is very small and hard to tighten . i now use a pliers to give the final 1/4 turn to stay in place .the screw or the sliding jig is worn ,so am now very weary of using this product as i fit kitchens for a living .might have to bit the bullet and buy the woodpecker one for 200 euro

[@timothylarson3583]

I just ordered the stainless steel angle meter. I needed one with flat sides and no magnets on at least one of the edges. I use this to set the height of the rakers to 6 degrees when sharpening my chain saw blades. I have to be careful with the current meter I have, as the magnets can pull up the links giving an incorrect reading. This method produces a better cutting chain over a traditional depth gauge.

[@HookedonWood]

Hi Timothy, interesting approach! thanks for sharing!👍

[@allanbeasley4565]

Thank you for the reviews and codes. Brilliant videos, full of useful content. Thanks 👍

[@RobertBarth1]

Man, these Woodpecker knockoff tools don't even change the anodization color.

[@tomaseklund2299]

I'm glad there are knockoff tools. Woodpeckers OneTIME Tool concept is frustrating and borderline insulting to consumers. I want a rounding jig now, not in two or thee (or many never) years time. For the price Woodpeckers are asking I think they really could manufacture more than just to order and keep a steady stock. I wouldn't mind paying the premium price they are asking for "original" tools, I just can't have the uncertainty and waiting times they are asking too. Regarding the color, I agree. That makes these knockoffs look more expensive than they are.

[@marknasia5293]

you both have points although red anodized aluminum isn’t proprietary. I actually keep all my wood working accessories red when I can just for easy storage and when my less than carpentry inclined assistant is asked to fetch me a tool, starting off with (it is red) is handy. Also the red or yellow adds a little in the safety factor. meaning if it is red or yellow in my shop, it isn’t permanent or part of the main tool and could be a hazard.

[@marknasia5293]

i forgot to mention in the SE Asian market, you can get the tools in anodized red, blue, yellow, black or just natural aluminum color.

[@nigtturner]

After finding your site I looked at bang good and they had these on offer at a rediculous low price I have ordered two ES-5 Aluminum Alloy Multifunction Woodworking Scribing Ruler 3D Miter Angle Marking T Ruler Square Layout 45/90 Degree Measuring Ruler - Blue £7.74

[@alexaben6849]

Al jouw 5star review producten gekocht. Al een paar toegekomen en idd. Love them! Bedankt

[@HookedonWood]

Veel plezier ermee!

[@BillSundstrom]

One of the best glue appliers for flat surfaces is a soft rubber ink roller. They are available in different widths. But brushes still work best for box and dovetail joints.

[@markb4919]

You have another fan. I am looking to make some upgrades to my shop and your videos are just perfect to help me consider some cost savings that don't cut on quality - truly great reviews. I cant wait to receive my first banggood order. I would love it if you could review, some wood turning tools. I am trying to figure out what carbide tools might work as well as adjustable chucks. If you have any info on this I know I am not the only viewer that would love to hear your thorough analysis. Thanks again!

[@jeffraemilia]

Woodpecker corner clamps & clamps are my preference. Made in America is my preference.

[@yodabert1]

12:01 Great imformative video im going to press the button on some of these weiko square clamps . For box construction can you get away with 4 or would you recommend buying 8

[@decoventanas2159]

*FELICITACIONES POR SUS PROGRAMAS DE ENSEÑANZAS!* *SALUDOS DESDE PANAMÁ.*

[@nicholugrim1108]

this is good cause China is the nearest supplier and very cheap. so its good to know what is good and what is not. keep it up

[@debeeriz]

you can buy silicone brushes in the cooking utensils aisle for less than 2 bucks and small silicone baking cases for a dollar

[@broekharco3581]

Hallo Dennis ik kijk iedere week uit of je al een nieuw filmpje geplaatst heb op China Tools , vindt ze heel goed onderbouwd en ook erg leuk zoals je Engels spreekt ga zo door SUPER !!

[@destitute8493]

You need to be fast if you want these bargains. Some additional items to consider: 1. Cross dowel jig (for knock down furniture) ID: 1701720 $27 USD 2. 14cm contour gauge ID: 1613075 $6 3. Pocket hole jig (see note) ID: 1581989 $11.19 Note: This jig comes with 6mm (1/4"), 8mm (5/16") and 10mm (3/8") bushings, and with drills in those sizes and with drill collars for each. ALSO if you go to 'Plywood Working' channel, you can get a free plan to turn this into a Kreg K5 type jig. And a last comment, I used DHL on a premium delivery of a Qiangsheng Luban size 4-1/2 hand plane. Picked up on Nov *6th* in Hong Kong and delivered, with customs paid, in eastern Canada on the morning of November *10th* with email notifications at each step. Expensive, but first-rate.

[@EricMcWhirter]

Dennis, I have enjoyed watching your videos, and with this latest episode of China Tools, I finally got around to placing an order for a few of the items that you listed today, and though I tried to use the codes you posted, I think I miss a couple of them. It's all good though. Thanks for the work you put into these videos.

[@Mukundanghri]

Very informative, great comparison and testing.

Schönes informatives Video ich habe gleich ein paar Dinge bestellt vielen Dank dafür stay Safe

[@dimitrimBE]

I already have most of them after viewing the previous series. But ordered the glue kit. Thx Denis!

[@HookedonWood]

Thanks Dimitri!

[@bronzekid1]

Quickly becoming my favorite wood working KZbin channel. Keep up the great work!!

[@sheilbwright7649]

Silicone brushes. I have another brand (paid more) but really useful. I've found a plastic jar filled with water and a old toothbrush works a treat when it comes to cleaning.

[@sheilbwright7649]

@@simeonadams6065 The deliberate undermining of American public education provided the Republican Party with a spectacular ROI.

[@thomasalison6188]

More great reviews from Dennis! Thanks!

[@s9plus20]

Great video. Just ordered the corner clamps!

[@martynr5836]

Brilliant and informative video, well done

[@YippeeKanyee]

Awesome advice. Thanks for the content on your channel! Bedankt!

[@creativewoodwork7229]

Oh, such a great China Tools series, I like the woodworking tools from Banggood, such as the kerfmaker, HONGDUI planer stops, also this Drillpro clamping square is nice for me and I have buy it, I look forward to your next China Tools video more. Thank You!

[@peterchessell28]

Are you Borat ....? sniiiice.

[@Johnbro8]

Thanks for sharing Dennis

[@MrCubflyer]

These clamps are a knock off of the much more expensive but much much better Woodpeckers clamps.

[@thecrownedjester]

Great review video. I bought half of these tools at your recommendation and subscribed to your channel. Thanks.

[@thecrownedjester]

I’m very satisfied with my purchases. Thanks again.

[@ernestcriss]

Just ordered a bunch of stuff through your links. Great work!

[@trevhaydon5090]

Hi Dennis, Thank you for all the hard work you put in to bring us this great content. It is very much appreciated. I have just purchased x4 of the 120mm clamps at a great price, thanks to you. Keep up the great work, I look forward to your content all the time. Take Care Dennis, and Stay Safe. 👍

[@bldrmtnman]

Really appreciate your attention to detail in your builds and your reviews. When trying to use the discount codes in combination with the 11.11 discount, it ended up raising the prices. So I didn't end up using your codes.

[@HookedonWood]

Sorry Tim, I find out from the reactions that the procedures are not that clear. Thanks for you comment.

I just bought corner clamps on Aliexpress, they use a spring . Haven’t get them yet but they look simpler to use. You may want to look at them

[@raynerstuelgalid]

Very good video. Straight to the point.

[@markanthonynilo9198]

What do you call the Clamp that appear between 1:52 and 2:03? The One with chrome finish that sticks itself on the table then appears to be like bar clamp. Do you have the link for that? Thank You Nice Review...

[@marknasia5293]

Those are machinist gauges or miter gauges

[@katabrontes]

Thanks Dennis, finally bought the squares and T ruler ( I also have Incra but thought I would try these to compare) Mike

[@HookedonWood]

Hi Michael, Good to hear. I hope you like the T-ruler as much as I do. What I like compared to the Incra that you have longer holes. and if you want to mark a line, the line is better visible. Incra has bigger numbers. Both are good.

[@donjohnson24]

The videos I most look forward to viewing.

[@NWGR]

Thanks Dennis! I'll be grabbing a bunch of these. I really like those clamping squares.

[@RobWhittlestone]

Nice channel! I just discovered you! I'm looking forward to watching all your past videos and the new ones! All the best from Switzerland, Rob

[@rnmaa1914]

I'm getting into doing woodworking and your videos are amazing. Can you post video on the Kreg Jig work clamp add-on you have done please and all also other shop useful jigs

[@HookedonWood]

I keep it in mind. What kreg jig do you mean?

[@rnmaa1914]

@@HookedonWood The K5 Jig Thank you for responding. I'm a data architect and completely new to woodworking. I'm yet to get started with initial inertia to start, hopefully, your videos are going to be a big inspiration.

[@gregreemers7331]

Thank you Denis for all your videos, I wait them everytime.. so much information.. hope BG will be able to do again those price offer for Black Friday, as I could not make it for 11.11.. thank you again for your great work

[@HookedonWood]

I know Black Friday is starting at 24th of November. I hope they will have the same prices.

[@gregreemers7331]

@@HookedonWood thank you for the answer, great videos, it helps me a lot in my to buy list.. hope BG will make good deal on BF too, thanks again and keep it up

[@Carl-bm6kq]

Dennis...With regard to your comments regarding the error of the digital angle meters, I personally have not used one, however based on your comments I am assuming that they can be "Zero Set" prior to use? If they cannot be zero set...Did you consider that the instrument may be reading an absolute measurement? By that I mean; is that your precision square for example, rests on the surface of your sawbench table when used to measure the angle of your saw blade. If your saw bench table was not perfectly level...wouldn't the error show up on the digital instrument?

[@johnfrederickson3082]

Thank you again for a wonderful vid.

[@PeterLukac-r9n]

What is difference between Veiko, Drillpro and Enjoywood corner square clamps? They look the same but cost 2x as much.

[@jablot5054]

They are all the same company under different badges. Much like Hotpoint, Whirlpool, AEG etc.

[@johandegroot7791]

Would you be so kind to mention what batteries (in detail) are needed for the mini digital protractor. It was not included and it is not mentioned on the instructions. I bought the metallic magnetic mini version with only one battery.

[@alimilibibi]

Thanks for your video buddy... gotta lot of info

[@Neslekkim]

How is shipping for you guys?, I used banggood a lot before, but then they changed how they ship items to Norway, so now it's not tracakble, and the item shows up suddenly on the door at night. And I get the message about delivery when it's there. Last time I was away for christmas, so I was lucky the item still was there. I think it's something called migyston they use, maybe that is some local thing? Do you get it by post or something else?

[@escorza88]

I can not find in the USA the hold down clamps with pegs you use on your video. Do you have a link where I can find them?

[@HookedonWood]

Please look at my site. hookedonwood.online/Frequently-asked-questions/ There you can find the link. Thanks

[@KSFWG]

Are these tools available on Amazon? I can't use my (U.S. based) bank card internationally.

[@HookedonWood]

I do not know. Sorry

[@tgmaudio2736]

I just stumbled across this channel by accident. I'm hooked now. I just subscribed. I must admit the first time I heard him say 'China Tools', because of his accent I thought he said 'genitals'...LOL!!! Keep up the content. Excellent series.

[@dadealeus]

Man, I really liked this video. You actually got a like and subscribe out of me on just the second set of clamps. You do an excellent job of detailing their uses, drawbacks, and even testing precision to some degree. I'm a beginning wood-worker and these types of videos are helping me save a lot of money and headaches as I get started. Thanks!

[@daifeichu]

Great videos. Good to see that there are other choices for tools but the problem I have with the Banggood tools that have scales on them is that they don't seem to have imperial measurements only. Some have both metric and imperial but I never use metric. Would love to see them sell tools with imperial markings.

[@HookedonWood]

I agree. More products are metric. I found a few that also have imperial, but that is not much.

[@jean-pierredeclemy7032]

Before purchasing cheap Chinese goods just consider the effect they are having on our own industries. How does China manage to send us stuff with a total cost of less than it would cost to post in the UK?

[@aonghusofaolain8686]

Denis, would you recommend the veiko or drill Pro version of this corner square?

[@HookedonWood]

They are the same. I would buy the best offer.

[@Mike--K]

Another excellent review, Dennis! I have the Woodpeckers corner squares, but would have gladly purchased the Banggood version had they been available a year ago...and had I known about Banggood. I wonder if Woodpeckers gave you the one thumb down. :-)

[@hanskutube]

What’s wrong with your Woodpecker product?

[@Mike--K]

@@hanskutube Hans, there's nothing wrong with them, and I have lots of Woodpeckers tools. The set of eight Woodpeckers 170mm clamps cost US$ 410, plus the extra cost of shipping. Compared with a set of the eight Banggood 140mm clamps for US$ 166, and free shipping, the choice is easy. :-) The Woodpeckers clamps are great and I've used them on every drawer and cabinet project in the past year. At the time, they were available and I couldn't find any suitable alternatives. However, all things being equal now, I would prefer to spend less than half on the Banggood clamps.

[@hanskutube]

@@Mike--K I am sure woodpeckers could sell a lot cheaper if they closed up manufacturing in the U.S. and moved their operations to China. Maybe pay extra to keep people on this side of the Pacific employed in good paying manufacturing jobs.

[@Mike--K]

@@hanskutube I live in Europe and don't mind paying for quality where it matters. I'm satisfied with the purchase decisions I made at the time, but if I was doing it again, I would buy the Banggood corner squares with no regrets.

[@Mike--K]

@@simeonadams6065 If your reply was directed to me, then surely you noticed I live in Europe and don't play a part in any U.S.-China war. I am quite comfortable with my purchase decisions and my fate.

[@johnsmith-dm2tq]

question. i work in my carport and the concrete is sloped for water runoff about 3 inches over the course of 25ft. this means my workbench is flat but not level. can i still use a digital level meter?

[@HookedonWood]

You can zero the level meter at any point. From that point it measures the relative angles.

[@insanet3]

great review, maybe ask suscribers which chinese tool they would like you to review?

[@fraglutz]

Thanks a lot for the codes, I ordered some things I had on my list for longer … ;-) TOP channel!!

[@RADCOMJ1]

Damn you Dennis everytime I come onto your channel it costs me money lol. really glad you are doing these tests. I guess my Xmas presents are all coming from China

[@HookedonWood]

😂😂

[@brianvarey3488]

I am looking for an accurate 30 60 90 square is there one that you have tested or can you test one?

[@HookedonWood]

90 degree I did, but the other I am not familiar of, if they have it.

[@terencecharlesworth1499]

Great video again some interesting kit

[@briandonovan6546]

Thank you for these videos. This is incredibly helpful. New Sub here

[@scottchladek1770]

Great review video, but my wallet hates you now. Thanks for all the links, congrats on the anniversary!

[@HookedonWood]

Sorry Scott 😂

[@Jo-xg6rk]

which is better for woodworking tools////banggood or ali express????

[@deltaforce3000]

Hello Dennis, thank you for your videos about affordable tools... I checked the links in the description, but a lot of them are offline (mdf, bessey, etc)... I suggest you to check them :) ... Thank you again...

[@SirBenJamin_]

Great video! Can you share a reasonably priced fence that works with the mitre gauge?

[@HookedonWood]

You can make one yourself. Watch episode 11. I made one.

[@lemech]

Hi could you share where you bought the bench dog clamp @1.52 on the video? Does it come in both 19 and 20mm bench dogs?

[@HookedonWood]

Here you go. www.axminstertools.com/eu/axminster-trade-clamps-screw-thread-hold-down-clamp-104459

[@lemech]

@@HookedonWood Many thanks!

[@walesara54]

Great videos. To the point and straight up opinions. If its bad you say so. I have ordered many things after watching your videos and have been quite satisfied. Soon I will need to order a new workshop to keep my gear in.

[@HookedonWood]

😀😀

[@RixtronixLAB]

Nice info, keep it up, thanks :)

[@rasmusmalgerudbjorgell7329]

Hi! Thanks for great videos and tips! Get so inspired! Would really like to view the China tools EP1 for the demo of the groove measurement tool but can not find EP1. Am I blind or has it been removed? Thanks in advance!

[@leonardorojas1781]

Aren't they available from Amazon?

[@lucascs26]

Denis, You are ruining my family finances with your reviews, I want to buy everything

[@HookedonWood]

Sorry Lucas, on the long term I hope I safe you some 😀

[@versus023]

Do you have some kind of show or list on banggood ? think I want to put everything in my wishlist hahaha

[@HookedonWood]

😀😀, great idea

[@michelrea2403]

Where are the links to the product’s?