Chinese Diesel Heater LCD Instructions

[@wearemany73]

LCD?!?! 🤔 Good explanation of the features. Thx for posting this. 👍

[@simonsmith9952]

Your a legend. It's taken me 2 months to work this thing out

[@irajtaghizadeh5913]

Hi, I look at least 20 hours video in KZbin all garbage , thanks for your great video. I was frizzing 😊 please make more videos

[@kellygb9278]

Thanks for this clarification. I have been several days trying to get help from the vendor. My controller will show all of the available icons on post, but does not use -Any- of them during run time. The reason I was questioning this was because of getting error E-06 with a fuel pump icon, during start up. The seller assures me the pump is fine, the igniter is fine & the blower is just stuck, & I need to adjust it - No, it's not stuck, nor is it rubbing. I adjusted the blower in till it touched, backed it off & still had the errors. Long story short, I adjusted the blower, in increments all the way out & then back in. Hard power off's between each adjustment. The only thing that cured it was: Like you said,, 'hold the upper & lower arrow buttons while powering the unit On' Oh,, the vendor said my controller doesn't use the icons B/S I just put the pump on 10 and let it run, no other setting besides time, are available

[@Len9504]

How do you get the pump to prime and how to show the glo plug and the pump icon to show up

[@Tractor010]

Hi, How do you increase the brightness of the controller? Mine is so dull you can't see the RED numbers..... Cheers.

[@lunepilot2874]

I think you need to make people aware this does not apply to all LCD screens. Mine looks exactly like yours but does not function like your showing.

[@cliffordjava4658]

Great vid. I have a question. How can I adjust the screen's brightness, if possible? Thx

[@PhilVerryChannel]

Is there a way to display Fahrenheit instead of Celsius? Scoured the internet and KZbin videos and see nothing.

[@adadaadadda1473]

on HH u can only change temperature not the speed?

[@precisiont5188]

No thermostat?

[@wd800stoke]

How to turn off Thea LCD screen ?

[@richardlewis7214]

jack ruben olsen you can’t turn it off it’s permanently on.

[@heartbreaked81994]

How do you prime the pump with this controller?

[@AndrewKarmy]

I wasn't able to find a prime function on mine (the typical prime functions wouldn't work on this "1907" style controller), I ended up cycling the heater in hertz mode until all the air was purged from the line. I did have to hard reboot the controller a few times as it eventually gave error codes from the pump running so many times without starting and for the flame going out due to air bubbles.

[@leslienaylor9547]

I struggled with mine I found after putting power on... hold the up and down button it started to prime Now I have the problem in getting to the settings to put in the code 1688 any help would be great 🙏

[@simonsmith9952]

For anyone wondering how to prime with this controller, press the top left settings button 5 times. It will come up with a picture of the pump down the bottom left area and a count down timer. Pressing up starts the pump for 60 second. Pressing down stops it. God knows how to get out of it but I just unplug control and re plug it in. Hope this helps someone

[@getemgirlvan]

Do you know how to make it stop beeping when you press buttons? Thanks!

[@mrandmrsedmonds]

I’m also looking for this answer

[@dancarter482]

Just grateful mine works at All! Seems to do something different every time I press a button .....

[@ianmurray5968]

With this type of LCD controller the usual way of priming doesn't work { press & hold ok + down button }. I now have pulled fuel from the main tank towards the filter by turning the heater on 3 times. I now have ERROR 10 on the display { flashing yellow warning triangle }. How do I remove the yellow warning triangle ? I am just trying to prime the fuel lines, it's a new 5KW heater. I have removed the 20A fuse tonight and will try to fully prime again tomorrow. Thank you.

[@leslienaylor9547]

On my heater I have to hold the up and down button then it primes and stops when you release

[@joepsereckis2939]

Hi, does anyone know how to get rid of E07 fault on a Chinese Diesel heater.

[@jacek271153]

Most likely ECU is faulty. Check kontinuity on blue wire from ECU to LCD. Get new ECU on AliExpress for $AS 27

[@romandaxner]

Hello, on me heater cannot set timer. Only the start time can be set, shutdown time cannot be set. Can you help me?

[@darrenkavanagh1615]

Mine will not set to the desired temperature, just keeps getting hotter. Is this a fault with the controller?

[@rickyreyes48]

Didnt work

[@DormantIdeasNIQ]

that is not military time, but 24 hour clock time

[@MarioMotoVlog]

Pin 1688?

[@juliejalbert3814]

Traduction français installé

[@giulianomogen4087]

Non possiedo le istruzioni cartacee per detto LCD dove posso reperirle per fare qualcosa, grazie [e-mail] sono bravi solo a vendere, ma le spiegazioni solo inglesi....